! $Id: 904,v 4.1 1994/07/26 23:51:57 pepsa Exp $ coverpage: title_1: TEST FOS RECONFIGURATIONS sci_cat: TEST pi_title: DR. pi_fname: RODGER pi_mi: E. pi_lname: DOXSEY pi_inst: ST SCI pi_country: USA fos: Y ! end of coverpage abstract: line_1: This proposal exercises the FOS reconfigurations line_2: in order to verify that the software and tables line_3: can properly reconfigure the FOS. ! ! end of abstract general_form_proposers: lname: DOXSEY fname: RODGER title: DR. mi: E. inst: ST SCI country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: Lines 1.02 and 1.05 are tests of suppression of LV to Hold. line_2: Since they are After by 100M, there should be no transitions. line_3: Lines 1.03 and 1.06 are test of the transitions to Hold. Since line_4: they are After by 130M, there should be a transition to Hold. line_5: Lines 2.02 and 3.02 are test of the ability of the system to line_6: schedule observations close togeher. Since they are After by line_7: 3M and the commanding will only take 2:31, this should work. line_8: Lines 2.03 and 3.03 test that the system can schedule obser- line_9: vations 30M apart with out reconfiguration problems. line_10: Lines 2.04 and 3.04 are the same tests as 1.02, except in HV. line_11: Lines 2.05 and 3.05 are tests of the transitions to LV. Since line_12: they are After by 130M there should be a transition to LV, but line_13: not to Hold. line_14: Lines 2.06 and 3.06 are tests of the transitions to Hold. Since line_15: they are After by 150M we should go to LV then Hold. line_16: Lines 4.01 and 4.02 test to verify that HV will stay up during line_17: SAA pasages but that no data will be taken in the SAA. ! question: 5 section: 1 line_1: ! !end of general form text general_form_address: lname: BROSS fname: BRIAN title: MR. category: PI inst: SPACE TELESCOPE SCIENCE INSTITUTE addr_1: JOHNS HOPKINS UNIVERSITY addr_2: HOMEWOOD CAMPUS city: BALTIMORE state: MD zip: 21218 country: USA ! lname: DOXSEY fname: RODGER mi: E. title: DR. category: PI inst: SPACE TELESCOPE SCIENCE INSTITUTE addr_1: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.010 targname: DARK config: FOS/RD opmode: ACCUM aperture: 4.3 sp_element: G780H num_exp: 1 time_per_exp: 10.0S comment_1: FOS IN LOW VOLTAGE ! linenum: 1.020 targname: DARK config: FOS/RD opmode: ACCUM aperture: 4.3 sp_element: G780H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 1.01 BY 100M; comment_1: FOS IN LOW VOLTAGE ! linenum: 1.030 targname: DARK config: FOS/RD opmode: ACCUM aperture: 4.3 sp_element: G780H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 1.02 BY 130M; comment_1: FOS IN LOW VOLTAGE ! linenum: 1.040 targname: DARK config: FOS/BL opmode: ACCUM aperture: 4.3 sp_element: G130H num_exp: 1 time_per_exp: 10.0S comment_1: FOS IN LOW VOLTAGE ! linenum: 1.050 targname: DARK config: FOS/BL opmode: ACCUM aperture: 4.3 sp_element: G130H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 1.04 BY 100M; comment_1: FOS IN LOW VOLTAGE ! linenum: 1.060 targname: DARK config: FOS/BL opmode: ACCUM aperture: 4.3 sp_element: G130H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 1.05 BY 130M; comment_1: FOS IN LOW VOLTAGE ! linenum: 2.010 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S ! linenum: 2.020 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 2.01 BY 3M ! linenum: 2.030 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 2.02 BY 30M ! linenum: 2.040 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 2.03 BY 100M ! linenum: 2.050 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 2.04 BY 130M ! linenum: 2.060 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 2.05 BY 150M ! linenum: 3.010 targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S ! linenum: 3.020 targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 3.01 BY 3M ! linenum: 3.030 targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 3.02 BY 30M ! linenum: 3.040 targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 3.03 BY 100M ! linenum: 3.050 targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 3.04 BY 130M ! linenum: 3.060 targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.5 sp_element: G190H num_exp: 1 time_per_exp: 10.0S req_1: AFTER 3.05 BY 150M ! linenum: 4.010 targname: WAVE config: FOS/BL opmode: ACCUM aperture: 4.3 sp_element: G190H num_exp: 8 time_per_exp: 15M comment_1: SEQ 4.01-4.02 MUST BE; comment_2: PERFORMED IN SAA ORBITS; ! linenum: 4.020 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 4.3 sp_element: G780H num_exp: 8 time_per_exp: 15M req_1: AFTER 4.01 BY 20M; ! ! end of exposure logsheet ! No scan data records found