!   $Id: 90,v 4.1 1994/07/26 21:09:13 pepsa Exp $

coverpage:

  title_1:         MISC WF/PC2 10.2 TESTS
    proposal_for:  ENG/OLT
    pi_fname:      V.
    pi_lname:      BALZANO
    pi_inst:       ST SCI
    pi_country:    USA
    pi_phone:      410-338-4736
! end of coverpage

abstract:

    line_1:        This proposal tests the 45 M calibration/3 H operational
    line_2:        clause and the 5 min UV warmup of the WFPC2 10.2 tree.
    line_3:        The WFII decontamination is included for testing purposes.
    line_4:        Also, the COSTAR-HUB requirement that the WFII shutters
    line_5:        cannot be opened within 30 minutes of any COSTAR motor
    line_6:        usage is tested.

!
! end of abstract

general_form_proposers:

  lname:           BALZANO
    fname:         V.
    inst:          ST SCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        Lines 10-40    tests the 20 minute CARD wait between
    line_2:        mirror flips
    line_3:        Line 100       test the 45 min calibration/3 H operate
    line_4:        maximum cal limit
    line_5:        Lines 300-350  tests going from one cal lamp to the other
    line_6:        Line 400       tests the decontamination procedure
    line_7:        Lines 500-530  tests the 30 min wait between COSTAR motor
    line_8:        usage and WFII shutter openings
    line_10:       NOTE: Remember to populate HUB qasistates for all lines if
    line_11:       not in TRANS

!
!end of general form text

general_form_address:

  lname:           BALZANO
    fname:         V.
    category:      PI
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA
    phone:         (301) 338-4736

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        BD+75D325
    name_2:        GSC4380-2196
    descr_1:       J,702
    pos_1:         RA=08H 10M 49.31S +/- 0.1S,
    pos_2:         DEC=+74D 57' 57.5" +/- 0.5",
    pos_3:         PLATE-ID=00LQ
    equinox:       2000
    pm_or_par:     NO
    fluxnum_1:     1
    fluxval_1:     V=9.54
    fluxnum_2:     2
    fluxval_2:     B-V=-0.37

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEFINE IF1
    targname:      INTFLAT
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       #
    time_per_exp:  40S
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;

!

    linenum:       2.000
    sequence_1:    DEFINE VF1
    targname:      VISFLAT
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       #
    time_per_exp:  300S
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;

!

    linenum:       4.000
    sequence_1:    DEFINE UV1
    targname:      UVFLAT
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F170W
    num_exp:       #
    time_per_exp:  300S
    priority:      1
    param_1:       ATD-GAIN=7
    req_1:         CYCLE 4;

!

    linenum:       10.000
    sequence_1:    USE IF1
    num_exp:       1
    req_1:         SEQ 10-40 NO GAP;

!

    linenum:       20.000
    sequence_1:    USE VF1
    num_exp:       1
    comment_1:     TRANSITION IN AND OUT OF LAMP
    comment_2:     STATES TESTING 20M CARD WAIT
    comment_3:     BETWEEN FLIP

!

    linenum:       30.000
    sequence_1:    USE IF1
    num_exp:       1

!

    linenum:       40.000
    sequence_1:    USE UV1
    num_exp:       1

!

    linenum:       100.000
    sequence_1:    USE VF1
    num_exp:       10
    comment_1:     TEST WHAT HAPPENS WHEN >45M
    comment_2:     REQUESTED

!

    linenum:       300.000
    sequence_1:    USE UV1
    num_exp:       5
    req_1:         SEQ 300-350
    comment_1:     GOING FROM ONE LAMP TO
    comment_2:     THE OTHER AND BACK

!

    linenum:       310.000
    sequence_1:    USE VF1
    num_exp:       5

!

    linenum:       320.000
    sequence_1:    USE UV1
    num_exp:       2

!

    linenum:       330.000
    sequence_1:    USE VF1
    num_exp:       1

!

    linenum:       340.000
    sequence_1:    USE UV1
    num_exp:       1

!

    linenum:       350.000
    sequence_1:    USE VF1
    num_exp:       1

!

    linenum:       400.000
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         CYCLE 4;
    comment_1:     QASISTATE: WFII : DECON

!

    linenum:       500.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       FOCUS=0.5
    req_1:         CYCLE 4 / 500-600;
    req_2:         SEQ 500-600;

!

    linenum:       510.000
    sequence_1:    USE UV1
    num_exp:       1

!

    linenum:       520.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       FOCUS=1.0

!

    linenum:       530.000
    targname:      BD+75D325
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  0.2S
    priority:      1
    req_1:         PCS MODE G

!

    linenum:       600.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  30M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         RT ANALYSIS;
    comment_1:     SI = WFPC2:PROTECT

!
! end of exposure logsheet

! No scan data records found