!   $Id: 9,v 4.1 1994/07/26 20:44:51 pepsa Exp $

coverpage:

  title_1:         WF/PC SHUTTER CONTROL AP TEST
    proposal_for:  ENG/OLT
    pi_fname:      V.
    pi_lname:      BALZANO
    pi_inst:       ST SCI
    pi_country:    USA
    pi_phone:      410-338-4736
! end of coverpage

abstract:

    line_1:        This proposal is to be run after the NSSC-I flight software
    line_2:        version 5.2 load.  It is designed to specifically test the new version
    line_3:        of the WFPC shutter control application processor (AP17).  This code
    line_4:        has been modified so that it can also be used by WFPC2.
    line_6:        One additional exposure line has been added to test HRS idling with
    line_7:        cal lamp on. Flight software handling of the HRS idle process has
    line_8:        been modified in build 5.2 to include cal lamp management.

!
! end of abstract

general_form_proposers:

  lname:           BALZANO
    fname:         V.
    inst:          ST SCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        This proposal is to be run after the NSSC-I flight software
    line_2:        version 5.2 load.  A number of WFPC exposures will be taken to exercise
    line_3:        the logic paths within the shutter control AP flight software code.
    line_4:        One HRS exposure line will exercise the new HRS idle process with the
    line_5:        cal lamp on.

!

  question:        5
    section:       1
    line_1:        The WFPC data are to be obtained close in time with one of the
    line_2:        BD+75D325 observations planned immediately after the flight software
    line_3:        load from proposals CAL/HRS 5041 or CAL/HSP 5022.
    line_4:        The HRS internal data can be taken at any time during the build 5.2
    line_5:        regression test period.

!
!end of general form text

general_form_address:

  lname:           BALZANO
    fname:         V.
    category:      PI
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA
    phone:         (301) 338-4736

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        BD+75D325
    name_2:        GSC4380-2196
    descr_1:       J,702
    pos_1:         RA=08H 10M 49.31S +/- 0.1S,
    pos_2:         DEC=+74D 57' 57.5" +/- 0.5",
    pos_3:         PLATE-ID=00LQ
    equinox:       2000
    pm_or_par:     NO
    fluxnum_1:     1
    fluxval_1:     V=9.54
    fluxnum_2:     2
    fluxval_2:     B-V=-0.37

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    targname:      BD+75D325
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F555W,F8ND
    num_exp:       2
    time_per_exp:  6M
    fluxnum_1:     1
    priority:      1
    param_1:       PRE-FLASH=NO
    req_1:         CYCLE 3;
    req_2:         NON-INT;
    req_3:         SEQ 1-4 NO GAP
    comment_1:     TEST TDF RESPONSE, BOTH BLADE
    comment_2:     CONFIGURATIONS, WITH SERIALS OFF

!

    linenum:       2.000
    targname:      BD+75D325
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F555W,F8ND
    num_exp:       2
    time_per_exp:  6M
    fluxnum_1:     1
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       CLOCKS=YES
    req_1:         CYCLE 3;
    req_2:         NON-INT
    comment_1:     TEST TDF RESPONSE, BOTH BLADE
    comment_2:     CONFIGURATIONS, WITH SERIALS ON

!

    linenum:       3.000
    targname:      BD+75D325
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F336W
    num_exp:       2
    time_per_exp:  2.3S
    fluxnum_1:     1
    priority:      1
    param_1:       PRE-FLASH=NO
    req_1:         CYCLE 3;
    req_2:         NON-INT
    comment_1:     TEST EXTERNAL DATA LOGGING (BLADE
    comment_2:     PARITY), BOTH BLADE CONFIGURATIONS,
    comment_3:     MICROPROCESSOR CONTROL

!

    linenum:       4.000
    targname:      BD+75D325
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F336W
    num_exp:       2
    time_per_exp:  2.3S
    fluxnum_1:     1
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       CLOCKS=YES
    req_1:         CYCLE 3;
    req_2:         NON-INT
    comment_1:     TEST EXTERNAL DATA LOGGING (BLADE
    comment_2:     PARITY), CLOCKS ON, MICROPROCESSOR
    comment_3:     CONTROL

!

    linenum:       5.000
    targname:      BIAS
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       PRE-FLASH=NO
    req_1:         CYCLE 3;
    comment_1:     JUST SHP TIME STAMP, NO SHUTTER
    comment_2:     MOVEMENT

!

    linenum:       6.000
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    G160M
    wavelength:    1520.0
    num_exp:       20
    time_per_exp:  4.8S
    priority:      1
    param_1:       STEP-PATT=3,
    param_2:       STEP-TIME=0.2,
    param_3:       COMB=TWO
    req_1:         CYCLE 3;
    req_2:         NON-INT
    comment_1:     USE INSTRUCTION EZCALIDLE

!
! end of exposure logsheet

! No scan data records found