! $Id: 893,v 4.1 1994/07/26 23:49:05 pepsa Exp $ coverpage: title_1: S/C MODE CERTIFICATION PROPOSAL proposal_for: TEST pi_fname: V. pi_lname: BALZANO pi_inst: ST SCI pi_country: USA pi_phone: 410-338-4736 ! end of coverpage abstract: line_1: This proposal is for flow certification line_2: of the S/C SETUP mode for engineering tapeuse, line_3: downlink and uplink comcon requests ! ! end of abstract general_form_proposers: lname: BALZANO fname: V. inst: ST SCI country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: This proposal is for S/C instruction flow certification line_2: It is meant to test the S/C mode instructions now using line_3: qreadout information on the pmdb. ! question: 3 section: 2 line_1: The structure is as follows. line_2: 1) A sequence of realtime downlinks in the available formats. line_3: 2) A series of downlinks with uplink requests line_4: 3) A series of tapeuse requests line_5: 4) A series of uplink comcons line_6: 5) A series of windowed comcon requests line_7: 6) A sequesnce of "null" cases line_8: 7) A series comcons/tapeuses with start time deltas ! !end of general form text general_form_address: lname: BALZANO fname: V. category: PI inst: SPACE TELESCOPE SCIENCE INSTITUTE addr_1: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA phone: (301) 338-4736 ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M fluxnum_1: 1 priority: 1 param_1: FORMAT=AN req_1: RT ANALYSIS; req_2: SEQ 1-4 NO GAP; req_3: CYCLE 4 / 1-603 comment_1: 4 KBPS DOWNLINK ! linenum: 2.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M fluxnum_1: 1 priority: 1 param_1: FORMAT=FN req_1: RT ANALYSIS; req_2: CRIT OBS comment_1: 32 KBPS FN DOWNLINK comment_2: NOTE: WANT BACKUP TO TAPE. ! linenum: 3.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M fluxnum_1: 1 priority: 1 param_1: FORMAT=PN req_1: RT ANALYSIS; comment_1: 32 KBPS PN DOWNLINK; comment_2: NEED SQL TO GET NO BACKUP TO TAPE; comment_3: QREADOUT: TAPE_MODE = N ! linenum: 4.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M fluxnum_1: 1 priority: 1 param_1: FORMAT=AN req_1: RT ANALYSIS comment_1: 4 KBPS DOWNLINK comment_2: FOR QACOMMENTS: DOWNLINK FOR comment_3: REAL TIME ANALYSIS comment_4: FOR QREADOUT: TAPE_MODE = N ! linenum: 100.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 30M fluxnum_1: 1 priority: 1 param_1: FORMAT=AN comment_1: 4 KBPS TO TAPE ! linenum: 101.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 30M fluxnum_1: 1 priority: 1 param_1: FORMAT=FN comment_1: 32 KBPS TO TAPE ! linenum: 102.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 15M fluxnum_1: 1 priority: 1 param_1: FORMAT=AN req_1: SEQ 102-104 NO GAP comment_1: 4 KBPS TAPEUSE ! linenum: 103.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 15M fluxnum_1: 1 priority: 1 param_1: FORMAT=FN comment_1: 32 KBPS TAPEUSE ! linenum: 104.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 15M fluxnum_1: 1 priority: 1 param_1: FORMAT=AN comment_1: 4 KBPS TAPEUSE ! linenum: 200.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 10M fluxnum_1: 1 priority: 1 param_1: FORMAT=AN req_1: RT ANALYSIS; req_2: CRIT OBS; req_3: REQ UPLINK comment_1: 4 KBPS DOWNLINK; comment_2: UPLINK REQUIRED WITH THE DOWNLINK; comment_3: WANT A BACKUP TO TAPE ! linenum: 201.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 10M fluxnum_1: 1 priority: 1 param_1: FORMAT=FN req_1: RT ANALYSIS; req_2: CRIT OBS; req_3: REQ UPLINK comment_1: 32 KBPS DOWNLINK; comment_2: UPLINK REQUIRED WITH THE DOWNLINK; comment_3: WANT A BACKUP TO TAPE ! linenum: 202.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M fluxnum_1: 1 priority: 1 param_1: FORMAT=AN req_1: RT ANALYSIS; req_2: REQ UPLINK comment_1: 4 KBPS DOWNLINK; comment_2: UPLINK REQUIRED WITH THE DOWNLINK; comment_3: NO BACKUP TO TAPE; comment_4: FOR QREADOUT: TAPE_MODE = N ! linenum: 203.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 30M fluxnum_1: 1 priority: 1 param_1: FORMAT=PN req_1: RT ANALYSIS; req_2: REQ UPLINK comment_1: 32 KBPS DOWNLINK; comment_2: UPLINK REQUIRED WITH THE DOWNLINK; comment_3: NO BACKUP TO TAPE; comment_4: FOR QREADOUT: TAPE_MODE = N ! linenum: 300.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M fluxnum_1: 1 priority: 1 req_1: REQ UPLINK comment_1: LONE UPLINK ! linenum: 301.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 10M fluxnum_1: 1 priority: 1 req_1: REQ UPLINK comment_1: FOR QACOMMENTS: comment_2: UPLINK PSTOLS: KCOMMANDO,KLOW,KHIGH comment_3: ADJUST HIGH AND LOW LIMITS ! linenum: 302.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M fluxnum_1: 1 priority: 1 param_1: FORMAT=AN req_1: REQ UPLINK comment_1: 4 KBPS TAPEUSE; comment_2: UPLINK REQUIRED ! linenum: 400.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 30M fluxnum_1: 1 priority: 1 req_1: REQ UPLINK comment_1: WINDOWED UPLINK; comment_2: FOR QREADOUT: comment_3: INTERVAL=2010S,CONTACT=1500S, comment_4: OFFSET=255S ! linenum: 401.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 30M fluxnum_1: 1 priority: 1 req_1: RT ANALYSIS comment_1: WINDOWED DOWNLINK; comment_2: FOR QREADOUT: comment_3: INTERVAL=2130S,CONTACT=1200S, comment_4: OFFSET=465S ! linenum: 402.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 30M fluxnum_1: 1 priority: 1 param_1: FORMAT=AN req_1: RT ANALYSIS; req_2: REQ UPLINK comment_1: 4 KBPS WINDOWED DOWNLINK comment_2: WITH WINDOWED UPLINK; comment_3: FOR QREADOUT: comment_4: INTERVAL=2130S,CONTACT=1200S, comment_5: OFFSET=465S ! linenum: 500.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M comment_1: THIS SHOULD BE A NULL CASE ! linenum: 501.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M param_1: FORMAT=XN comment_1: FORMAT SET TO XN ! linenum: 502.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M comment_1: BLANK FORMAT ! linenum: 503.000 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 20M comment_1: MODE = POINTING ! linenum: 600.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M param_1: FORMAT=AN req_1: RT ANALYSIS; comment_1: FOR QREADOUT: START_TIME = 10S ! linenum: 601.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M param_1: FORMAT=PN req_1: RT ANALYSIS; comment_1: FOR QREADOUT: START_TIME = 10S ! linenum: 602.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M param_1: FORMAT=FN req_1: RT ANALYSIS; comment_1: FOR QREADOUT: START_TIME = 120S ! linenum: 603.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 42M req_1: REQ UPLINK comment_1: WINDOWED UPLINK WITH START_TIME comment_2: OFFSET; comment_3: FOR QREADOUT: START_TIME = 60S comment_4: INTERVAL = 2730S CONTACT = 1800S comment_5: OFFSET = 465S ! ! end of exposure logsheet ! No scan data records found