! File: 886P.PROP ! Database: PEPDB ! Date: 18-JAN-1994:19:31:05 coverpage: title_1: TEST PCS SCHEDULING AND INSTRUCTIONS proposal_for: TEST pi_title: DR. pi_fname: VICKI pi_mi: A pi_lname: BALZANO pi_inst: ST SCI pi_country: USA pi_phone: (301)338-4736 ! end of coverpage abstract: line_1: Verify the scheduling and commanding required for line_2: Guide Star Acquisitions, their associated slews line_3: and FHST updates. line_4: Some manual transformation will be needed. line_5: Specific instructions are included to define line_6: the desired PCS configuration for each line. ! ! end of abstract general_form_proposers: lname: BALZANO fname: VICKI title: DR. mi: A inst: ST SCI country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: This proposal specifies the observations which line_2: should be scheduled to test the ability of the line_3: system to plan and schedule slews, FHST updates line_4: and guide star acquisitions. It is required line_5: in order to ensure that the existing and future line_6: software and/or command instructions are line_7: correct. line_8: THIS PROPOSAL IS A TEST PROPOSAL AND SHOULD NOT line_9: BE EXECUTED AGAINST ANY HARDWARE WHICH IS CRITICAL line_10: TO THE NORMAL OPERATIONS OF HST. ! question: 3 section: 1 line_1: The proposal makes use of targets within 35 degrees line_2: of the ecliptic poles to ensure that they never enter line_3: the solar exclusion zone. These targets have the line_4: additional favorable characteristic that Earth line_5: occultations are minimized. line_8: The observations are broken into sections to facilitate line_9: testing individual capabilities independently of one another. line_10: The structure is: line_12: lines 1xx - GYRO acquisitions and Slews; line_13: lines 2xx - Coarse and fine lock pair acquisitions; line_14: lines 3xx - Single star acquisitions; line_15: lines 4xx - SAM manuevers; line_16: lines 5xx - FGS Reacquisitions; line_17: lines 6xx - Spatial Scan test; line_18: lines 7xx - Proper Motion Test; line_19: The transformation should result in separate scheduling line_20: units for each of these sections. ! question: 6 section: 1 line_1: The acquisition scenarios listed in the comments line_2: of the exposure lines should be used for each of line_3: the exposures. This may require special SQL to line_5: obtain the proper scenario. line_7: If the exposure logsheet lines specify a unique line_8: number of guide stars for that line, then the line_9: operations procedure which selects guide stars must line_10: be modified to select that number of stars. line_12: Each test must be implemented as a separate unit for line_13: purposes of scheduling. Each test is intended to be line_14: independent to facilitate testing. ! !end of general form text general_form_address: lname: BALZANO fname: VICKI mi: A title: DR. category: PI inst: ST SCI addr_1: SPACE TELESCOPE SCIENCE INSTITUTE addr_2: SESD addr_3: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA phone: (301)338-4736 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: ANEP descr_1: F, 413; pos_1: RA = 18H 02M 20.68S +/-.1S, pos_2: DEC = 66D 33' 15.17" +/-1" equinox: 2000.0 pos_epoch_bj: J pos_epoch_yr: 2000.00 comment_1: NORTH ECLIPTIC POLE FIELD ! targnum: 2 name_1: ASEP descr_1: F, 413; pos_1: RA = 05H 57M 51.41S +/-.1S, pos_2: DEC =-64D 29' 09.47" +/-1" equinox: 2000.0 pos_epoch_bj: J pos_epoch_yr: 2000.00 comment_1: SOUTH ECLIPTIC POLE FIELD ! targnum: 3 name_1: ANEP10 descr_1: F, 413; pos_1: RA = 18H 02M 20.68S +/-.1S, pos_2: DEC = 56D 33' 15.17" +/-1" equinox: 2000.0 pos_epoch_bj: J pos_epoch_yr: 2000.00 comment_1: FIELD 10 DEGREES FROM comment_2: NORTH ECLIPTIC POLE FIELD ! targnum: 4 name_1: ANEP35A descr_1: F, 413; pos_1: RA = 18H 02M 20.68S +/-.1S, pos_2: DEC = 31D 33' 15.17" +/-1" equinox: 2000.0 pos_epoch_bj: J pos_epoch_yr: 2000.00 comment_1: FIELD 35 DEGREES FROM comment_2: NORTH ECLIPTIC POLE FIELD ! targnum: 5 name_1: ANEP35B descr_1: F, 413; pos_1: RA = 6H 02M 20.68S +/-.1S, pos_2: DEC = 78D 26' 44.83" +/-1" equinox: 2000.0 pos_epoch_bj: J pos_epoch_yr: 2000.00 comment_1: FIELD 35 DEGREES FROM comment_2: NORTH ECLIPTIC POLE FIELD ! targnum: 6 name_1: NGC188-1 descr_1: F, 413; pos_1: PLATE-ID = ZZZZ, pos_2: RA = 0H 45M 0.0S +/-.1S, pos_3: DEC = 85D 10' 0.0" +/-1" equinox: 2000.0 pos_epoch_bj: J pos_epoch_yr: 2000.00 comment_1: FIELD IN NGC188 comment_2: WHICH HAS PROPER MOTION GS ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 100.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; req_2: SEQ 100-190 NO GAP; req_3: CYCLE 4 /100-710; comment_1: BEGIN TEST OF GYRO SCENARIOS; ! linenum: 110.000 targname: ANEP10 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; ! linenum: 120.000 targname: ANEP35A config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; ! linenum: 130.000 targname: ANEP35B config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; ! linenum: 140.000 targname: ASEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; ! linenum: 150.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; ! linenum: 160.000 targname: ANEP10 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; ! linenum: 170.000 targname: ANEP35A config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; ! linenum: 180.000 targname: ANEP35B config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; ! linenum: 190.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; ! linenum: 200.000 targname: ANEP35B config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; req_2: SEQ 200-245 NO GAP; comment_1: BEGIN ACQUISITION SCENARIO TESTS; comment_2: SET UP THE POINTING FOR THE FIRST comment_3: EXPOSURE; ! linenum: 210.000 targname: ANEP35B config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE C; comment_1: SMALL SEARCH RADIUS; comment_2: COARSE TRACK - ONE PAIR; ! linenum: 215.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE C; comment_1: LARGE SEARCH RADIUS; comment_2: COARSE TRACK - ONE PAIR; ! linenum: 220.000 targname: ANEP10 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE C comment_1: MEDIUM SEARCH RADIUS; comment_2: COARSE TRACK - TWO PAIR; ! linenum: 225.000 targname: ANEP10 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE C; comment_1: SMALL SEARCH RADIUS; comment_2: COARSE TRACK - TWO PAIR; ! linenum: 230.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE F; comment_1: MEDIUM SEARCH RADIUS; comment_2: FINE LOCK - ONE PAIR; ! linenum: 235.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE F comment_1: SMALL SEARCH RADIUS; comment_2: FINE LOCK - ONE PAIR; ! linenum: 240.000 targname: ANEP10 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE F; comment_1: MEDIUM SEARCH RADIUS; comment_2: FINE LOCK - TWO PAIR; ! linenum: 245.000 targname: ANEP35B config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE F; comment_1: LARGE SEARCH RADIUS; comment_2: FINE LOCK - TWO PAIR; ! linenum: 300.000 targname: ASEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; req_2: SEQ 300-350 NO GAP; comment_1: BEGIN SINGLE STAR SCENARIO TEST; comment_2: SET UP THE POINTING FOR THE FIRST comment_3: EXPOSURE; ! linenum: 310.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE C; comment_1: LARGE SEARCH RADIUS; comment_2: COARSE TRACK - SINGLE STAR ACQ; ! linenum: 320.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE C; comment_1: SMALL SEARCH RADIUS; comment_2: COARSE TRACK - SINGLE STAR ACQ; ! linenum: 325.000 targname: ANEP10 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE C; comment_1: MEDIUM SEARCH RADIUS; comment_2: COARSE TRACK - SINGLE STAR ACQ; ! linenum: 330.000 targname: ANEP10 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE F; comment_1: SMALL SEARCH RADIUS; comment_2: FINE LOCK - SINGLE STAR ACQ; ! linenum: 340.000 targname: ANEP35A config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE F; comment_1: MEDIUM SEARCH RADIUS; comment_2: FINE LOCK - SINGLE STAR ACQ; ! linenum: 350.000 targname: ANEP35B config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: PCS MODE F; comment_1: LARGE SEARCH RADIUS; comment_2: FINE LOCK - SINGLE STAR ACQ; ! linenum: 400.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: SEQ 400-450 NO GAP; comment_1: BEGIN SAM TEST; comment_2: POSITION 0; ! linenum: 410.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: POS TARG +2,+2; comment_1: SAM TEST; comment_2: POSITION 1; ! linenum: 420.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: POS TARG +2,-2; comment_1: SAM TEST; comment_2: POSITION 2; ! linenum: 430.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: POS TARG -2,-2; comment_1: SAM TEST; comment_2: POSITION 3; ! linenum: 440.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: POS TARG -2,+2; comment_1: SAM TEST; comment_2: POSITION 4; ! linenum: 450.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; comment_1: END OF SAM TEST; comment_2: RETURN TO POSITION 0; ! linenum: 460.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; req_2: SEQ 460-475 NO GAP; comment_1: BEGIN MRSAM TEST; comment_2: POSITION 0; ! linenum: 465.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; req_2: POS TARG +2,+2; comment_1: MRSAM TEST; comment_2: POSITION 1; ! linenum: 470.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; req_2: POS TARG -2,-2; comment_1: MRSAM TEST; comment_2: POSITION 3; ! linenum: 475.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; comment_1: END OF MRSAM TEST; comment_2: RETURN TO POSITION 0; ! linenum: 500.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS comment_1: BEGIN REACQUISITION TEST; ! linenum: 510.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 3 time_per_exp: 30M priority: 1 param_1: CONTROL=FGS req_1: PCS MODE F; comment_1: REACQUISITION TEST - FINE LOCK; ! linenum: 520.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 3 time_per_exp: 30M priority: 1 param_1: CONTROL=FGS req_1: PCS MODE C; comment_1: REACQUISITION TEST - COARSE TRACK; ! linenum: 600.000 targname: ANEP config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 10S priority: 1 param_1: CONTROL=FGS req_1: NON-INT; req_2: SPATIAL SCAN; comment_1: SPATIAL SCAN TEST; ! linenum: 700.000 targname: NGC188-1 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 param_1: CONTROL=GYRO req_1: NON-INT; req_2: SEQ 700-710 NO GAP; comment_1: BEGIN GUIDE STAR PROPER MOTION TEST; comment_2: SET UP THE POINTING ! linenum: 710.000 targname: NGC188-1 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 param_1: CONTROL=FGS req_1: NON-INT; comment_1: GUIDE STAR WITH PROPER MOTION ! ! end of exposure logsheet scan_data: line_list: 600 fgs_scan: cont_dwell: D dwell_pnts: 5 dwell_secs: 10.00 scan_width: 0.0000 scan_length: 30.000 sides_angle: 90.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 45.000 scan_frame: S/C len_offset: 0.0000 wid_offset: 0.0000 ! ! end of scan data