Proposal_Information Title: WFPC2 CYCLE 5 CAL: DECON Proposal_Category: CAL/WFC Scientific_Category: Cycle: 5 Investigators PI_name: BURROWS, CHRIS PI_Institution: STSCI CoI_Name: BAGGETT, SYLVIA CoI_Institution: STSCI Contact: Questions Observing_Description: Before and after each decontamination, a set of internals are taken: 2 biases (gain 7), 2 biases (gain 15), 2 F555W intflats (10S at gain 7), 2 F555W intflats (20S at gain 15), 2 kspots (one at 1.0 S, one at 2.6 S, both gain 15), and finally, 5 darks (gain 7, serials=off). Intflats must be taken without interruption; each set of internals should be grouped within two days. Decontamination procedure is performed 33H +/- 12H after first set of internals; final set of internals is done 12H +/- 12H after decon. Abstract: This proposal defines the decontamination procedure to be run during cycle 5. A variety of internal images are taken before and after the decontamination in order to verify its success. Visits !!!!!!! DECON ONE !!!!!!!!!!!!!!!!!!!!!!!!!!!!! Visit_Number: 01 Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 02 Visit_Requirements: AFTER 01 BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 03 Visit_Requirements: AFTER 02 BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: !!!!!!! DECON TWO !!!!!!!!!!!!!!!!!!!!!!!!!!!!! Visit_Number: 04 Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 05 Visit_Requirements: AFTER 04 BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 06 Visit_Requirements: AFTER 05 BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 07 Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 08 Visit_Requirements: AFTER 07 BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 09 Visit_Requirements: AFTER 08 BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0A Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0B Visit_Requirements: AFTER 0A BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 0C Visit_Requirements: AFTER 0B BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0D Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0E Visit_Requirements: AFTER 0D BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 0F Visit_Requirements: AFTER 0E BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0G Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0H Visit_Requirements: AFTER 0G BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 0I Visit_Requirements: AFTER 0H BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0J Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0K Visit_Requirements: AFTER 0J BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 0L Visit_Requirements: AFTER 0K BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0M Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0N Visit_Requirements: AFTER 0M BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 0O Visit_Requirements: AFTER 0N BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0P Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0Q Visit_Requirements: AFTER 0P BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 0R Visit_Requirements: AFTER 0Q BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0S Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0T Visit_Requirements: AFTER 0S BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 0U Visit_Requirements: AFTER 0T BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0V Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0W Visit_Requirements: AFTER 0V BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 0X Visit_Requirements: AFTER 0W BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0Y Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 0Z Visit_Requirements: AFTER 0Y BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 10 Visit_Requirements: AFTER 0Z BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 11 Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 12 Visit_Requirements: AFTER 11 BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 13 Visit_Requirements: AFTER 12 BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 14 Visit_Requirements: On_Hold_Comments: Visit_Comments: INTS FOR BEFORE DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: Visit_Number: 15 Visit_Requirements: AFTER 14 BY 0H TO 18H On_Hold_Comments: Exposure_number: 10 Target_Name: DARK Config: WFPC2 Opmode: DECON Aperture: WFALL Sp_Element: ! must leave blank; using 'DEF': SYNTAX: DEF not available for WFPC2 & DECON. ! "Please check the Phase II Proposal Instructions ! leaving blank: get feasibility error as opposed to syntax Wavelength: Optional_Parameters: Number_of_iterations:1 Time_Per_Exposure: 0.0S Special_Requirements: Comments: QASISTATE: WFII SI DECON Visit_Number: 16 Visit_Requirements: AFTER 15 BY 0H TO 24H On_Hold_Comments: Visit_Comments: INTS FOR AFTER DECON Exposure_number: 1 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 2 Target_Name: BIAS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:2 Time_Per_Exposure: 0S Special_Requirements: Comments: Exposure_number: 10 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements: Comments: Exposure_number: 20 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=7 Number_of_iterations:1 Time_Per_Exposure: 10S Special_Requirements:SEQ 10-20 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 30 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements: Comments: Exposure_number: 40 Target_Name: INTFLAT Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: F555W Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 20S Special_Requirements:SEQ 30-40 NON-INT Comments: DO INTFLATS BACK-TO-BACK Exposure_number: 50 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 1S Special_Requirements: Comments: Exposure_number: 60 Target_Name: KSPOTS Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: ATD-GAIN=15 Number_of_iterations:1 Time_Per_Exposure: 2.6S Special_Requirements:SEQ 50-60 NON-INT Comments: DO KSPOTS BACK-TO-BACK Exposure_number: 70 Target_Name: DARK Config: WFPC2 Opmode: IMAGE Aperture: WFALL Sp_Element: DEF Wavelength: Optional_Parameters: CR-SPLIT=NO, CLOCKS=NO, ATD-GAIN=7 Number_of_iterations:5 Time_Per_Exposure: 30M Special_Requirements: Comments: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Data_Distribution Medium: 8MM Blocking_Factor: 10 Ship_To: BURROWS Ship_Via: UPS Recipient_Email: