coverpage:

  title_1:         WFPC AUGMENTATION - NGC 604 AND M16 -
  title_2:         CYCLE 4 AND FUTURE-CYCLE CONTINATION
    sci_cat:       STELLAR ASTROPHYSICS
    proposal_for:  AUG/WF2
    cont_id:       4853
    wf_pc:         Y
    pi_title:      PROF.
    pi_fname:      JAMES
    pi_mi:         A.
    pi_lname:      WESTPHAL
    pi_inst:       CALTECH
    pi_country:    USA
    pi_phone:      (818) 395-4900
    keywords_1:    SUPERNOVA REMNANT
    hours_pri:     5.7
    num_pri:       1
    pi_position:   PROFESSOR

! end of coverpage

abstract:

    line_1:        This WF/PC augmentation program images the supergiant
    line_2:        H II region NGC604 in the light from three emission
    line_3:        lines and in a relatively line-free continuum band.
    line_4:        We also image a field in the M16 HII region in the light
    line_5:        from three emission lines which cover a range of temperature
    line_6:        and ionization states.

    

!
! end of abstract

general_form_proposers:

  lname:           WESTPHAL
    fname:         JAMES
    mi:            A.
    inst:          CALTECH
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        All exposures should be in Cycle 4 or 5.

!

  question:        13
    section:       1

    line_1:        Images will be taken of the supergiant H II Region NGC 604.
    line_2:        Images will be taken in the light of H alpha (F656N),
    line_3:        [S II] (F673N), and [O III] (F502N).  Starlight will be
    line_4:        isolated using the F547M filter.
    line_5:        Images will be taken of several "elephant trunk" features
    line_6:        in the M16 HII region.  Images in the light of H alpha (F656N)
    line_7:        [S II] (F673N), and [O III] (F502N). Continuum images will
    line_8:        be taken in F547M.


!
!end of general form text

general_form_address:

  lname:           WESTPHAL
    fname:         JAMES
    mi:            A.
    title:         PROF.
    category:      PI
    inst:          CALTECH
    addr_1:        M/S 170-25
    addr_2:        DIVISION OF GEOLOGICAL
    addr_3:        & PLANETARY SCIENCES
    city:          PASADENA
    state:         CA
    zip:           91125
    country:       USA
    phone:         (818) 395-4900

!

  lname:           HESTER
    fname:         JOHN
    mi:            J.
    category:      PI
    inst:          ARIZONA STATE UNIV.
    addr_1:        DEPT. OF PHYSICS
    addr_2:        AND ASTRONOMY
    addr_3:        ASU
    city:          TEMPE
    state:         AZ
    zip:           85287
    country:       USA
    phone:         602-965-0741

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        NGC604-A
    descr_1:       H, 503, 928
    pos_1:         RA= 1H 34M 32.60S +/- .5",
    pos_2:         DEC= +30D 46' 53.6" +/- .5"
    equinox:       2000
    comment_1:     POINTING A

!

    targnum:       2
    name_1:        NGC604-B
    descr_1:       H, 503, 928
    pos_1:         RA= 1H 34M 32.59S +/- .5",
    pos_2:         DEC= +30D 46' 56.1" +/- .5"
    equinox:       2000
    comment_1:     POINTING B

!

    targnum:       3
    name_1:        NGC604-C
    descr_1:       H, 503, 928
    pos_1:         RA= 1H 34M 34.97S +/- .5",
    pos_2:         DEC= +30D 47' 10.0" +/- .5"
    equinox:       2000
    comment_1:     POINTING C


    targnum:       4
    name_1:        M16-A
    descr_1:       G, 503, 930
    pos_1:         RA= 18H 18M 48.94S +/- .2",
    pos_2:         DEC= -13D 49' 51.3" +/- .2"
    equinox:       2000
    comment_1:     POINTING A


    targnum:       5
    name_1:        M16-B
    descr_1:       G, 503, 930
    pos_1:         RA= 18H 18M 53.27S +/- .2",
    pos_2:         DEC= -13D 49' 45.9" +/- .2"
    equinox:       2000
    comment_1:     POINTING B


    targnum:       6
    name_1:        M16-C
    descr_1:       G, 503, 930
    pos_1:         RA= 18H 18M 53.38S +/- .2",
    pos_2:         DEC= -13D 49' 49.1" +/- .2"
    equinox:       2000
    comment_1:     POINTING C

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.01    
    sequence_1:    DEFINE
    sequence_2:    M33SEQ
    targname:      #
    config:        WFPC2
    opmode:        IMAGE
    aperture:      #
    sp_element:    F656N
    num_exp:       2
    time_per_exp:  1100S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       ATD-GAIN=7,
    param_3:       CLOCKS=YES
    req_1:         GROUP 1.01-1.04 WITHIN 1D;
    req_2:         SAME POS FOR 1.02-1.04 AS 1.01;
    req_3:         SAME ORIENT FOR 1.02-1.04 AS 1.01;
!
    linenum:       1.02
    sequence_1:    DEFINE
    sequence_2:    M33SEQ
    targname:      #
    config:        WFPC2
    opmode:        IMAGE
    aperture:      #
    sp_element:    F673N
    num_exp:       2
    time_per_exp:  1100S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       ATD-GAIN=7,
    param_3:       CLOCKS=YES
!
    linenum:       1.03
    sequence_1:    DEFINE
    sequence_2:    M33SEQ
    targname:      #
    config:        WFPC2
    opmode:        IMAGE
    aperture:      #
    sp_element:    F502N
    num_exp:       2
    time_per_exp:  1100S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       ATD-GAIN=7,
    param_3:       CLOCKS=YES
!
    linenum:       1.04
    sequence_1:    DEFINE
    sequence_2:    M33SEQ
    targname:      #
    config:        WFPC2
    opmode:        IMAGE
    aperture:      #
    sp_element:    F547M
    num_exp:       2
    time_per_exp:  500S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       ATD-GAIN=7,
    param_3:       CLOCKS=YES

!
    linenum:       1.1
    sequence_1:    USE
    sequence_2:    M33SEQ
    targname:      NGC604-A
    aperture:      PC1-FIX
    req_1:         SELECT 1 OF 1.1 OR 1.2 OR 1.3 ;
    req_2:         ORIENT 212D +/- 13D ;
    req_3:         COND IF ORIENTATION CAN BE SCHEDULED ;
    req_4:         CYCLE 4;
    comment_1:     THREE COMBINATIONS OF POSITION AND
    comment_2:     ORIENTATION ARE SPECIFIED, ONLY ONE
    comment_3:     OF WHICH IS TO BE RUN.  POSITION A
    comment_4:     OR B ARE PREFERABLE TO C, BUT
    comment_5:     RUN WHICHEVER BEST FITS THE
    comment_6:     SCHEDULE.
!
    linenum:       1.2
    sequence_1:    USE
    sequence_2:    M33SEQ
    targname:      NGC604-B
    aperture:      PC1-FIX
    req_1:         ORIENT 230D +/- 5D ;
    req_2:         COND IF ORIENTATION CAN BE SCHEDULED ;
    req_3:         CYCLE 4;
    comment_1:     PC1-FIX APERTURE IS MEANT TO BE AT
    comment_2:     THE GEOMETRICAL CENTER OF THE 
    comment_3:     ILLUMINATED PORTION OF THE PC1 FIELD.
!
    linenum:       1.3
    sequence_1:    USE
    sequence_2:    M33SEQ
    targname:      NGC604-C
    aperture:      WFALL-FIX
    req_1:         POS TARG 10,10;
    req_2:         ORIENT 101D +/- 28D ;
    req_3:         COND IF ORIENTATION CAN BE SCHEDULED ;
    req_4:         CYCLE 4;
    comment_1:     THE COMBINATION OF APERTURE AND POS
    comment_2:     TARG IS INTENDED TO SPECIFY THE
    comment_3:     POSITION OF THE APEX OF THE PYRAMID. 


    linenum:       4.01
    sequence_1:    DEFINE
    sequence_2:    M16SEQ
    targname:      #
    config:        WFPC2
    opmode:        IMAGE
    aperture:      #
    sp_element:    F656N
    num_exp:       2
    time_per_exp:  1100S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       ATD-GAIN=7,
    param_3:       CLOCKS=YES
    req_1:         GROUP 4.01-4.04 WITHIN 1D;
    req_2:         SAME POS FOR 4.02-4.04 AS 4.01;
    req_3:         SAME ORIENT FOR 4.02-4.04 AS 4.01;

!   
 
    linenum:       4.02
    sequence_1:    DEFINE
    sequence_2:    M16SEQ
    targname:      #
    config:        WFPC2
    opmode:        IMAGE
    aperture:      #
    sp_element:    F673N
    num_exp:       2
    time_per_exp:  1100S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       ATD-GAIN=7,
    param_3:       CLOCKS=YES
!

    linenum:       4.03
    sequence_1:    DEFINE
    sequence_2:    M16SEQ
    targname:      #
    config:        WFPC2
    opmode:        IMAGE
    aperture:      #
    sp_element:    F502N
    num_exp:       2
    time_per_exp:  1100S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       ATD-GAIN=7,
    param_3:       CLOCKS=YES

!

    linenum:       4.04
    sequence_1:    DEFINE
    sequence_2:    M16SEQ    
    targname:      #
    config:        WFPC2
    opmode:        IMAGE
    aperture:      #
    sp_element:    F547M
    num_exp:       2
    time_per_exp:  140S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       ATD-GAIN=7,
    param_3:       CLOCKS=YES

!

    linenum:       4.1
    sequence_1:    USE
    sequence_2:    M16SEQ
    targname:      M16-A
    aperture:      PC1-FIX
    req_1:         SELECT 1 OF 4.1 OR 4.2 OR 4.3 OR 4.4 ;
    req_2:         ORIENT 258.5D +/- 2.5D ;
    req_3:         COND IF ORIENTATION CAN BE SCHEDULED ;
    req_4:         CYCLE 4;
    comment_1:     FOUR COMBINATIONS OF POSITION AND
    comment_2:     ORIENTATION ARE SPECIFIED, ONLY ONE
    comment_3:     OF WHICH IS TO BE RUN.  POSITION A
    comment_4:     (LINES 4.1 OR 4.2) IS PREFERABLE TO 
    comment_5:     B, OR C.  USE B OR C IF A
    comment_6:     CANNOT BE SCHEDULED.

!

    linenum:       4.2
    sequence_1:    USE
    sequence_2:    M16SEQ
    targname:      M16-A
    aperture:      PC1-FIX
    req_1:         ORIENT 275D +/- 2D ;
    req_2:         COND IF ORIENTATION CAN BE SCHEDULED ;
    req_3:         CYCLE 4;
    comment_1:     PC1-FIX APERTURE IS MEANT TO BE AT
    comment_2:     THE GEOMETRICAL CENTER OF THE
    comment_3:     ILLUMINATED PORTION OF PC1.

!

    linenum:       4.3
    sequence_1:    USE
    sequence_2:    M16SEQ
    targname:      M16-B
    aperture:      PC1-FIX
    req_1:         ORIENT 99D +/- 10D ;
    req_2:         COND IF ORIENTATION CAN BE SCHEDULED ;
    req_3:         CYCLE 4;

!

    linenum:       4.4
    sequence_1:    USE
    sequence_2:    M16SEQ
    targname:      M16-C
    aperture:      PC1-FIX
    req_1:         ORIENT 78D +/- 4D ;
    req_2:         COND IF ORIENTATION CAN BE SCHEDULED ;
    req_3:         CYCLE 4;

!
! end of exposure logsheet

! No scan data records found