! $Id: 5648,v 6.1 1994/07/27 20:05:15 pepsa Exp $ COVERPAGE: TITLE_1: WF/PC2 CYCLE 4 CAL: CHARGE TRANSFER TEST PROPOSAL_FOR: CAL/WFC PI_FNAME: MARK PI_LNAME: CLAMPIN PI_INST: STSCI PI_COUNTRY: USA PI_PHONE: (410) 338-4711 WF_PC: Y abstract: line_1: The primary purpose of this test is to map out line_2: the charge transfer trap locations; the data line_3: will also provide information on the recovery of line_4: charge initially lost in the traps. To achieve line_5: these goals, a standard star is continuously line_6: scanned across the WFPC2 field of view so that line_7: ~1000DN per pixel is obtained along each streak. line_8: Two scans are done in each direction on each WF line_9: chip (only 1 scan in each direction on the PC line_10: chip). GENERAL_FORM_PROPOSERS: LNAME: CLAMPIN FNAME: MARK INST: STSCI COUNTRY: USA LNAME: BAGGETT FNAME: SYLVIA INST: STSCI COUNTRY: USA GENERAL_FORM_ADDRESS: LNAME: CLAMPIN FNAME: MARK CATEGORY: PI ADDR_1: 3700 San Martin Drive CITY: Baltimore STATE: MD ZIP: 21218 COUNTRY: USA PHONE: (410) 338-4711 LNAME: BAGGETT FNAME: SYLVIA MI: M CATEGORY: CI ADDR_1: 3700 San Martin Drive CITY: Baltimore STATE: MD ZIP: 21218 COUNTRY: USA PHONE: (410) 338-5054 general_form_text: question: 2 section: 1 line_1: These calibration tests are performed to characterize line_2: the charge transfer traps and their effects. line_3: Proposal to be run at request of PI. question: 3 section: 1 question: 5 section: 1 fixed_targets: targnum: 1 name_1: BD+75D325 descr_1: J,702 pos_1: RA = 08H 10M 49.31S +/- 1S, pos_2: DEC = +74D 57' 57.5" +/- 1" equinox: 2000. fluxnum_1: 1 fluxval_1: V=9.54 exposure_logsheet: linenum: 101.00 targname: BD+75D325 sequence_1: DEF BDX config: WFPC2 opmode: IMAGE aperture: WF2-FIX sp_element: F656N num_exp: 1 time_per_exp: 1S priority: 1 param_1: ATD-GAIN = 7 req_1: CYCLE 4/ 101-104; req_2: SPATIAL SCAN SINGLE-EXP; req_3: POS TARG -30, 30 comment_1: MOVE TO CORNER OF WF2 comment_2: THEN SCAN TARGET in +X comment_3: ACROSS WF2 AND PC1 linenum: 102.00 targname: BD+75D325 sequence_1: DEF BDX config: WFPC2 opmode: IMAGE aperture: WF2-FIX sp_element: F656N num_exp: 1 time_per_exp: 1S priority: 1 param_1: ATD-GAIN = 7 req_1: SPATIAL SCAN SINGLE-EXP; req_2: POS TARG -30, -30 comment_1: MOVE TO CORNER OF WF2 comment_2: THEN SCAN TARGET in +X comment_3: ACROSS WF2 AND PC1 linenum: 103.00 targname: BD+75D325 sequence_1: DEF BDX config: WFPC2 opmode: IMAGE aperture: WF3-FIX sp_element: F656N num_exp: 1 time_per_exp: 1S priority: 1 param_1: ATD-GAIN = 7 req_1: SPATIAL SCAN SINGLE-EXP; req_2: POS TARG -30, 30 comment_1: MOVE TO CORNER OF WF3 comment_2: THEN SCAN TARGET in +X comment_3: ACROSS WF3 AND WF4 linenum: 104.00 targname: BD+75D325 sequence_1: DEF BDX config: WFPC2 opmode: IMAGE aperture: WF3-FIX sp_element: F656N num_exp: 1 time_per_exp: 1S priority: 1 param_1: ATD-GAIN = 7 req_1: SPATIAL SCAN SINGLE-EXP; req_2: POS TARG -30, -30 comment_1: MOVE TO CORNER OF WF3 comment_2: THEN SCAN TARGET in +X comment_3: ACROSS WF3 AND WF4 linenum: 201.00 targname: BD+75D325 sequence_1: DEF BDY config: WFPC2 opmode: IMAGE aperture: WF3-FIX sp_element: F656N num_exp: 1 time_per_exp: 1S priority: 1 param_1: ATD-GAIN = 7 req_1: CYCLE 4/ 201-204; req_2: SPATIAL SCAN SINGLE-EXP; req_3: POS TARG -30, -30 comment_1: MOVE TO CORNER OF WF3 comment_2: THEN SCAN TARGET in +Y comment_3: ACROSS WF3 AND WF2 linenum: 202.00 targname: BD+75D325 sequence_1: DEF BDY config: WFPC2 opmode: IMAGE aperture: WF3-FIX sp_element: F656N num_exp: 1 time_per_exp: 1S priority: 1 param_1: ATD-GAIN = 7 req_1: SPATIAL SCAN SINGLE-EXP; req_2: POS TARG 30, -30 comment_1: MOVE TO CORNER OF WF3 comment_2: THEN SCAN TARGET in +Y comment_3: ACROSS WF3 AND WF2 linenum: 203.00 targname: BD+75D325 sequence_1: DEF BDY config: WFPC2 opmode: IMAGE aperture: WF4-FIX sp_element: F656N num_exp: 1 time_per_exp: 1S priority: 1 param_1: ATD-GAIN = 7 req_1: SPATIAL SCAN SINGLE-EXP; req_2: POS TARG -30, -30 comment_1: MOVE TO CORNER OF WF4 comment_2: THEN SCAN TARGET in +Y comment_3: ACROSS WF4 AND PC1 linenum: 204.00 targname: BD+75D325 sequence_1: DEF BDY config: WFPC2 opmode: IMAGE aperture: WF4-FIX sp_element: F656N num_exp: 1 time_per_exp: 1S priority: 1 param_1: ATD-GAIN = 7 req_1: SPATIAL SCAN SINGLE-EXP; req_2: POS TARG 30, -30 comment_1: MOVE TO CORNER OF WF4 comment_2: THEN SCAN TARGET in +Y comment_3: ACROSS WF4 linenum: 501.000 sequence_1: USE BDX comment_1: SCANS IN X DIRECTION linenum: 502.000 sequence_1: USE BDY comment_1: SCANS IN Y DIRECTION scan_data: line_list: 101.0 fgs_scan: cont_dwell: C dwell_pnts: dwell_secs: scan_width: 0.000 scan_length: 75.000 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.2000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0 line_list: 102.0 fgs_scan: cont_dwell: C dwell_pnts: dwell_secs: scan_width: 0.000 scan_length: 110.000 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.2000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0 line_list: 103.0-104.0 fgs_scan: cont_dwell: C dwell_pnts: dwell_secs: scan_width: 0.000 scan_length: 150.000 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.2000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0 line_list: 201-202 fgs_scan: cont_dwell: C dwell_pnts: dwell_secs: scan_width: 0.000 scan_length: 150.000 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.2000 first_line_pa: 180.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0 line_list: 203 fgs_scan: cont_dwell: C dwell_pnts: dwell_secs: scan_width: 0.000 scan_length: 110.000 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.2000 first_line_pa: 180.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0 line_list: 204 fgs_scan: cont_dwell: C dwell_pnts: dwell_secs: scan_width: 0.000 scan_length: 75.000 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.2000 first_line_pa: 180.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0 !~~~RPSS~~~,SIB_WFPC2,cte.prop,15-APR-1994 14:09