!   $Id: 5617,v 3.1 1994/07/27 19:48:19 pepsa Exp $

coverpage:

  title_1:         SMOV FOS PLATE SCALE
    proposal_for:  SMC/FOS
    pi_title:      DR.
    pi_fname:      ANURADHA
    pi_lname:      KORATKAR
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      (410)338-4470
    keywords_1:    FOS,SMOV
    num_pri:       1
    fos:           Y
    realtime:      Y
! end of coverpage

abstract:

    line_1:        The goal is to measure the precise plate scale and orientation. This will be
    line_2:        acheived by performing a raster step and dwell sequence in the 4.3 arcsec
    line_3:        aperture. The edges of the aperture should be avoided to prevent vignetting
    line_4:        effects. An aperture map is required at each step of the dwell sequence. This
    line_5:        test has to be conducted for both the RED and BLUE detectors. We will also
    line_6:        determine the offset between the two detectors.

!
! end of abstract

general_form_proposers:

  lname:           TAYLOR
    fname:         CYNTHIA
    mi:            J
    inst:          STSCI
    country:       USA

!

  lname:           KEYES
    fname:         CHARLES (TONY)
    mi:            D
    inst:          STSCI
    country:       USA

!

  lname:           KINNEY
    fname:         ANNE
    mi:            L
    inst:          STSCI
    country:       USA

!

  lname:           KORATKAR
    fname:         ANURADHA
    mi:            P
    inst:          STSCI
    country:       USA

!

  lname:           EVANS
    fname:         IAN
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        Since the FOS apertures are nested about the same position on the photocathode,
    line_2:        an accurate plate scale and orientation cannot be derived as for the other
    line_3:        instruments with widely separated apertures, as projected on the photocathodes.
    line_4:        Therefore, the precise FOS place scale and orientation will be determined as
    line_5:        follows: Perform a raster step and dwell sequence in the 4.3 arcsec aperture,
    line_6:        using a 0.7 arcsec step size on a 3.0X3.0 arcsec grid. The edges of the 4.3
    line_7:        arcsec aperture should be avoided to prevent vignetting effects. An aperture map
    line_8:        is required at each step in the dwell sequence.
    line_9:        Since the target will be accurately centered for the raster scans in both the
    line_10:       red and blue detectors, we will simultaneously determine the offsets between
    line_11:       the two detectors.

!

  question:        5
    section:       1
    line_1:        PREREQUISITES:  COSTAR/FOS FINE ALIGNMENT TILT (4747) should be complete
    line_2:        The FGS encoder values are to be extracted and recorded during the step and
    line_3:        dwell sequences. The center point in the spatial scan should have the object
    line_4:        centered in the aperture.

!

  question:        5
    section:       2
    line_1:        Start all spatial scans in the center of the aperture. Do not
    line_2:        offset pointing to center the scan on the aperture.
    line_3:        All observations in this program MUST occur in non-SAA impacted
    line_4:        orbits.

!

  question:        7
    section:       1
    line_1:        Data reduction will be performed at ST ScI.
    line_2:        PDB update of plate scale expected.

!
!end of general form text

general_form_address:

  lname:           Kinney
    fname:         Anne
    category:      PI
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4831

!

  lname:           Taylor
    fname:         Cynthia
    mi:            J
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-5084

!

  lname:           Keyes
    fname:         Charles (Tony)
    mi:            D
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4975

!

  lname:           Koratkar
    fname:         Anuradha
    mi:            P
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4470

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        NGC188-255
    name_2:        GSSS3788900057
    descr_1:       J,701,707
    pos_1:         RA=00H 44M 21.171S +/- 0.01S,
    pos_2:         DEC=+85D 26' 29.10" +/- 0.1",
    pos_3:         PLATE-ID=ZZZZ,
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V = 13.42 +/- 0.1
    fluxnum_2:     2
    fluxval_2:     B = 13.61 +/- 0.1

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       11.000
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  3.3S
    fluxnum_1:     1
    priority:      1
    req_1:         CYCLE 4 / 11-14.85;
    req_2:         ONBOARD ACQ FOR 11.25-11.5;
    comment_1:     BLUESIDE PLATE SCALE

!

    linenum:       11.250
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    fluxnum_1:     1
    priority:      1
    comment_1:     CONFIRMATION ACQ IMAGE.

!

    linenum:       11.500
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  4S
    fluxnum_1:     1
    priority:      1
    param_5:       SEARCH-SIZE-X=5,
    param_6:       SEARCH-SIZE-Y=5,
    param_7:       SCAN-STEP-X=0.18,
    param_8:       SCAN-STEP-Y=0.18
    req_1:         ONBOARD ACQ FOR 11.75-12.85;

!

    linenum:       11.750
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    fluxnum_1:     1
    priority:      1
    comment_1:     CONFIRMATION ACQ IMAGE.

!

    linenum:       12.000
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 12 PROVIDES 32K ENGINEERING DATA
    comment_3:     FOR FGS ENCODER READINGS DURING SCAN
    comment_4:     IN LINES 12.1-12.5.

!

    linenum:       12.100
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  128S
    fluxnum_1:     1
    priority:      1
    req_1:         SPATIAL SCAN;

!

    linenum:       12.500
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  128S
    fluxnum_1:     1
    priority:      1
    req_1:         SPATIAL SCAN;

!

    linenum:       12.600
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       12.800
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    fluxnum_1:     1
    priority:      1

!

    linenum:       12.850
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    fluxnum_1:     1
    priority:      1
    comment_1:     SIDE SWITCH.

!

    linenum:       13.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.1S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 13.25-13.5;
    comment_1:     RED SIDE PLATE SCALE

!

    linenum:       13.250
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    fluxnum_1:     1
    priority:      1
    comment_1:     CONFIRMATION ACQ IMAGE.

!

    linenum:       13.500
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  4S
    fluxnum_1:     1
    priority:      1
    param_5:       SEARCH-SIZE-X=5,
    param_6:       SEARCH-SIZE-Y=5,
    param_7:       SCAN-STEP-X=0.18,
    param_8:       SCAN-STEP-Y=0.18
    req_1:         ONBOARD ACQ FOR 13.75-14.85;
    comment_1:     SIDE SWITCH ACQ.

!

    linenum:       13.750
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    fluxnum_1:     1
    priority:      1
    comment_1:     CONFIRMATION ACQ IMAGE.

!

    linenum:       14.000
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 14 PROVIDES 32K ENGINEERING DATA
    comment_3:     FOR FGS ENCODER READINGS DURING SCAN
    comment_4:     IN LINES 14.1-14.5.

!

    linenum:       14.100
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  128S
    fluxnum_1:     1
    priority:      1
    req_1:         SPATIAL SCAN;

!

    linenum:       14.500
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  128S
    fluxnum_1:     1
    priority:      1
    req_1:         SPATIAL SCAN;

!

    linenum:       14.600
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       14.800
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    fluxnum_1:     1
    priority:      1

!

    linenum:       14.850
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    fluxnum_1:     1
    priority:      1
    comment_1:     SIDE SWITCH.

!
! end of exposure logsheet

scan_data:

    line_list:     12.1,14.1
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    5
    dwell_secs:       1.00
    scan_width:       3.1000
    scan_length:      3.1000
    sides_angle:    90.0000
    number_lines:  3
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    1.55
    wid_offset:    1.55

!

    line_list:     12.5,14.5
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    5
    dwell_secs:       1.00
    scan_width:       1.5500
    scan_length:      3.1000
    sides_angle:    90.0000
    number_lines:  3
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    1.55
    wid_offset:    0.775

!
! end of scan data