!   $Id: 5614,v 5.1 1994/07/27 19:46:56 pepsa Exp $

coverpage:

  title_1:         SMOV FOS/FGS FINE ALIGNMENT (1.0 REFERENCE)
    proposal_for:  SMC/FOS
    pi_title:      DR.
    pi_fname:      ANNE
    pi_lname:      KINNEY
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      (410)338-4831
    keywords_1:    FOS,SMOV
    num_pri:       1
    fos:           Y
! end of coverpage

abstract:

    line_1:        The goal is to measure the precise aperture locations and
    line_2:        sizes of the 1.0 aperture.  The analysis of the observations
    line_3:        will result in database changes to the table of aperture
    line_4:        locations. Precise aperture locations will be determined by
    line_5:        performing a raster step and dwell sequence in the FOS
    line_6:        apertures along the edges of the apertures.  An aperture map
    line_7:        is required at each step of the dwell sequence.  This test
    line_8:        has to be conducted for both the RED and BLUE detectors.

!
! end of abstract

general_form_proposers:

  lname:           TAYLOR
    fname:         CYNTHIA
    mi:            J
    inst:          STSCI
    country:       USA

!

  lname:           KEYES
    fname:         CHARLES (TONY)
    mi:            D
    inst:          STSCI
    country:       USA

!

  lname:           KINNEY
    fname:         ANNE
    mi:            L
    inst:          STSCI
    country:       USA

!

  lname:           KORATKAR
    fname:         ANURADHA
    mi:            P
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        THIS PROPOSAL MUST EXECUTE AFTER ANY COSTAR MIRROR MOVES
    line_2:        FOLLOWING THE REPEAT OF PROPOSAL 5604.
    line_3:        Precise aperture location of the 1.0 apertures will be
    line_4:        determined by performing a raster step and dwell sequence
    line_5:        in the apertures along two perpendicular directions in the
    line_6:        apertures to find the maximum throughput for the 1.0
    line_7:        apertures.  This technique provides the most precise V2V3
    line_8:        locations.  The dwell scans of the 1.0 apertures will
    line_9:        provide the most precise locations of the apertures in the
    line_10:       V2V3 frame and relative to each other.

!

  question:        5
    section:       1
    line_1:        PREREQUISITES:  COSTAR/FOS FINE ALIGNMENT (5604) REPEAT
    line_2:        should be complete and the COSTAR mechanisms in the final
    line_3:        SMOV positions.  The FGS encoder values are to be extracted
    line_4:        and recorded during the step and dwell sequences.  The center
    line_5:        point in the spatial scan should have the object centered in
    line_6:        the aperture.  Pointing stability of 0.01" is required for
    line_7:        the FOS data.

!

  question:        7
    section:       1
    line_1:        Data reduction will be performed at ST ScI.
    line_2:        PDB update of aperture locations and sizes expected.

!
!end of general form text

general_form_address:

  lname:           Kinney
    fname:         Anne
    category:      PI
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4831

!

  lname:           Taylor
    fname:         Cynthia
    mi:            J
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-5084

!

  lname:           Keyes
    fname:         Charles (Tony)
    mi:            D
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4975

!

  lname:           Koratkar
    fname:         Anuradha
    mi:            P
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4470

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        NGC188-255
    name_2:        GSC-3788900057
    descr_1:       J,701,707
    pos_1:         RA=00H 44M 21.171S +/- 0.01S,
    pos_2:         DEC=+85D 26' 29.10" +/- 0.1",
    pos_3:         PLATE-ID=ZZZZ
    equinox:       J2000
    fluxnum_1:     1
    fluxval_1:     V = 13.42 +/- 0.1
    fluxnum_2:     2
    fluxval_2:     B-V = 0.19 +/- 0.1

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       301.000
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  3.6S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 301.2-301.3;
    req_2:         SEQ 301.0-303.5 NO GAP;
    req_3:         CYCLE 4 / 301.0-403.5;

!

    linenum:       301.200
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    priority:      1

!

    linenum:       301.300
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  4.1S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.12,
    param_4:       SCAN-STEP-Y=0.12
    req_1:         ONBOARD ACQ FOR 301.4-303.5;

!

    linenum:       301.400
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    priority:      1

!

    linenum:       301.900
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 301.9 PROVIDES 32K ENGINEERING
    comment_3:     DATA FOR FGS ENCODER READINGS DURING
    comment_4:     SCAN IN LINES 302-303.

!

    linenum:       302.000
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    req_2:         SEQ 302-302.1 NO GAP;
    comment_1:     CENTER OF SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       302.100
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER OF SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       303.000
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    req_2:         SEQ 303-303.1 NO GAP;
    comment_1:     CENTER OF SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       303.100
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER OF SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE 1.0
    comment_4:     APERTURE, USING 0.093" PER STEP.

!

    linenum:       303.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       401.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  0.75S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 401.2-401.3;
    req_2:         SEQ 401.0-403.5 NO GAP;

!

    linenum:       401.200
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    priority:      1

!

    linenum:       401.300
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.8S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.12,
    param_4:       SCAN-STEP-Y=0.12
    req_1:         ONBOARD ACQ FOR 401.4-403.5;

!

    linenum:       401.400
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    priority:      1

!

    linenum:       401.900
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 401.9 PROVIDES 32K ENGINEERING
    comment_3:     DATA FOR FGS ENCODER READINGS DURING
    comment_4:     SCAN IN LINES 402-403

!

    linenum:       402.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    req_2:         SEQ 402-402.1 NO GAP;
    comment_1:     CENTER OF SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       402.100
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER OF SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       403.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    req_2:         SEQ 403-403.1 NO GAP;
    comment_1:     CENTER OF SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       403.100
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER OF SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE 1.0
    comment_4:     APERTURE, USING 0.093" PER STEP.

!

    linenum:       403.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!
! end of exposure logsheet

scan_data:

    line_list:     302,402
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    9
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      1.5000
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    0.75
    wid_offset:    0.0000

!

    line_list:     302.1,402.1
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    8
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      1.3125
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    0.65625
    wid_offset:    0.0000

!

    line_list:     303,403
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    9
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      1.5000
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:   0.0000
    scan_frame:    S/C
    len_offset:    0.75
    wid_offset:    0.0

!

    line_list:     303.1,403.1
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    8
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      1.3125
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:   0.0000
    scan_frame:    S/C
    len_offset:    0.65625
    wid_offset:    0.0

!
! end of scan data