!   $Id: 5606,v 3.1 1994/07/27 19:43:22 pepsa Exp $

coverpage:

  title_1:         SMOV FOS/FGS FINE ALIGNMENT (SMALL APERTURES)
    proposal_for:  SMC/FOS
    pi_title:      DR.
    pi_fname:      ANNE
    pi_lname:      KINNEY
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      (410)338-4831
    keywords_1:    FOS,SMOV
    num_pri:       2
    fos:           Y
! end of coverpage

abstract:

    line_1:        The goal is to measure the precise aperture locations and
    line_2:        sizes.  The analysis of the observations will result in
    line_3:        database changes to the table of aperture locations.
    line_4:        Precise aperture locations will be determined by performing
    line_5:        a raster step and dwell sequence in the FOS apertures along
    line_6:        the edges of the apertures.  An aperture map is required at
    line_7:        each step of the dwell sequence.  This test has to be
    line_8:        conducted for both the RED and BLUE detectors.

!
! end of abstract

general_form_proposers:

  lname:           TAYLOR
    fname:         CYNTHIA
    mi:            J
    inst:          STSCI
    country:       USA

!

  lname:           KEYES
    fname:         CHARLES (TONY)
    mi:            D
    inst:          STSCI
    country:       USA

!

  lname:           KINNEY
    fname:         ANNE
    mi:            L
    inst:          STSCI
    country:       USA

!

  lname:           KORATKAR
    fname:         ANURADHA
    mi:            P
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        THIS PROPOSAL REPLACES SU 06 AND 07 OF PROPOSAL 4908.
    line_2:        Precise aperture locations of the small apertures will be
    line_3:        determined by performing a raster step and dwell sequence
    line_4:        in the apertures along two perpendicular directions in the
    line_5:        apertures to find the maximum throughput for the small
    line_6:        apertures.  This technique provides the most precise V2V3
    line_7:        locations.  The dwell scans of the small aperture will
    line_8:        provide the most precise locations of the apertures in the
    line_9:        V2V3 frame and relative to each other.

!

  question:        5
    section:       1
    line_1:        PREREQUISITES:  COSTAR/FOS FINE ALIGNMENT TILT (4747) should
    line_2:        be complete and the COSTAR mechanisms in the final SMOV
    line_3:        positions.  The FGS encoder values are to be extracted and
    line_4:        recorded during the step and dwell sequences.  The center
    line_5:        point in the spatial scan should have the object centered in
    line_6:        the aperture.  Pointing stability of 10% of the smallest
    line_7:        aperture (0.1") used - 0.01" - is required for the FOS data.
    line_8:        The overlight limit must be set to the default value for
    line_9:        non-mirror observations (12 million), even though the MIRROR
    line_10:       is used.  All observations in this program MUST occur in
    line_11:       non-SAA impacted orbits.

!

  question:        7
    section:       1
    line_1:        Data reduction will be performed at ST ScI.
    line_2:        PDB update of aperture locations and sizes expected.

!
!end of general form text

general_form_address:

  lname:           Kinney
    fname:         Anne
    category:      PI
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4831

!

  lname:           Taylor
    fname:         Cynthia
    mi:            J
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-5084

!

  lname:           Keyes
    fname:         Charles (Tony)
    mi:            D
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4975

!

  lname:           Koratkar
    fname:         Anuradha
    mi:            P
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4470

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        STAR-161114+593654
    name_2:        GSC-0388300391
    name_3:        GSPC-P100-D
    descr_1:       J,707
    pos_1:         RA=16H 11M 13.54S +/- 0.2",
    pos_2:         DEC=+59D 36' 54.1" +/- 0.2",
    pos_3:         PLATE-ID=02X1
    equinox:       J2000
    fluxnum_1:     1
    fluxval_1:     V = 13.29 +/- 0.05
    fluxnum_2:     2
    fluxval_2:     B-V = 0.68 +/- 0.05

!

    targnum:       2
    name_1:        STAR-012213-600218
    name_2:        GSC-0884900171
    name_3:        GSPC-S113-E
    descr_1:       J,707
    pos_1:         RA=01H 22M 12.98S +/- 0.3",
    pos_2:         DEC=-60D 02' 18.5" +/- 0.3",
    pos_3:         PLATE-ID=02IB
    equinox:       J2000
    fluxnum_1:     1
    fluxval_1:     V = 13.23 +/- 0.01
    fluxnum_2:     2
    fluxval_2:     B-V = 0.54 +/- 0.01

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       301.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  2.4S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 301.2-301.3;
    req_2:         SEQ 301.0-316.5 NO GAP;
    req_3:         CYCLE 4 / 301.0-416.5;

!

    linenum:       301.200
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    priority:      1

!

    linenum:       301.300
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5.9S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.12,
    param_4:       SCAN-STEP-Y=0.12
    req_1:         ONBOARD ACQ FOR 301.4-308.9;

!

    linenum:       301.400
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    priority:      1

!

    linenum:       301.900
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 301.9 PROVIDES 32K ENGINEERING
    comment_3:     DATA FOR FGS ENCODER READINGS DURING
    comment_4:     SCAN IN LINES 302-303.

!

    linenum:       302.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       303.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE 1.0
    comment_4:     APERTURE, USING 0.093" PER STEP.

!

    linenum:       303.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       303.600
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 303.6 PROVIDES 32K ENGINEERING
    comment_3:     DATA FOR FGS ENCODER READINGS DURING
    comment_4:     SCAN IN LINES 304-306,
    comment_5:     AFTER 303.5 BY 15M

!

    linenum:       304.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       305.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE 0.3
    comment_4:     APERTURE, USING 0.031" PER STEP.

!

    linenum:       306.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.25X2.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.
    comment_3:     THE PRECEDING IS A SEQUENCE TO
    comment_4:     LOCATE THE WIDTH OF THE SLIT,
    comment_5:     USING 0.025" PER STEP.

!

    linenum:       306.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       306.600
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 306.6 PROVIDES 32K ENGINEERING
    comment_3:     DATA FOR FGS ENCODER READINGS DURING
    comment_4:     SCAN IN LINES 307-308,
    comment_5:     AFTER 306.5 BY 15M

!

    linenum:       307.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      2.0-BAR
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.
    comment_3:     THE PRECEDING IS A SEQUENCE TO
    comment_4:     LOCATE THE WIDTH OF THE BAR,
    comment_5:     USING 0.031" PER STEP.

!

    linenum:       308.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.7X2.0-BAR
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.
    comment_3:     THE PRECEDING IS A SEQUENCE TO
    comment_4:     LOCATE THE WIDTH OF THE BAR,
    comment_5:     USING 0.031" PER STEP.

!

    linenum:       308.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       308.900
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.25-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  6.4S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.1,
    param_4:       SCAN-STEP-Y=0.1
    req_1:         ONBOARD ACQ FOR 308.95;

!

    linenum:       308.950
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  7.1S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.03,
    param_4:       SCAN-STEP-Y=0.03
    req_1:         ONBOARD ACQ FOR 309.0-312.9;

!

    linenum:       309.000
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 309 PROVIDES 32K ENGINEERING DATA
    comment_3:     FOR FGS ENCODER READINGS DURING SCAN
    comment_4:     IN LINES 309.1-312.0.

!

    linenum:       309.100
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.25-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       310.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.25-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE
    comment_4:     0.25-LOWER PAIR APERTURES, USING
    comment_5:     0.019" PER STEP.

!

    linenum:       311.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  12S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       312.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  12S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE
    comment_4:     0.1-LOWER PAIR APERTURES, USING
    comment_5:     0.009" PER STEP.

!

    linenum:       312.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       312.900
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.25-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  6.4S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.1,
    param_4:       SCAN-STEP-Y=0.1
    req_1:         ONBOARD ACQ FOR 312.95;

!

    linenum:       312.950
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  7.1S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.03,
    param_4:       SCAN-STEP-Y=0.03
    req_1:         ONBOARD ACQ FOR 313-316.5;

!

    linenum:       313.000
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 313 PROVIDES 32K ENGINEERING DATA
    comment_3:     FOR FGS ENCODER READINGS DURING SCAN
    comment_4:     IN LINES 313.1-316.0.

!

    linenum:       313.100
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.25-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       314.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.25-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE
    comment_4:     0.25-UPPER APERTURE, USING
    comment_5:     0.019" PER STEP.

!

    linenum:       315.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.1-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  12S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       316.000
    targname:      STAR-012213-600218
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.1-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  12S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE
    comment_4:     0.1-UPPER APERTURE, USING
    comment_5:     0.009" PER STEP.

!

    linenum:       316.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       401.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  0.75S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 401.2-401.3;
    req_2:         SEQ 401.0-416.5 NO GAP;

!

    linenum:       401.200
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    priority:      1

!

    linenum:       401.300
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  2.3S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.12,
    param_4:       SCAN-STEP-Y=0.12
    req_1:         ONBOARD ACQ FOR 401.4-408.9;

!

    linenum:       401.400
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  64S
    priority:      1

!

    linenum:       401.900
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 401.9 PROVIDES 32K ENGINEERING
    comment_3:     DATA FOR FGS ENCODER READINGS DURING
    comment_4:     SCAN IN LINES 402-403

!

    linenum:       402.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       403.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE 1.0
    comment_4:     APERTURE, USING 0.093" PER STEP.

!

    linenum:       403.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       403.600
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 403.6 PROVIDES 32K ENGINEERING
    comment_3:     DATA FOR FGS ENCODER READINGS DURING
    comment_4:     SCAN IN LINES 404-406,
    comment_5:     AFTER 403.5 BY 15M

!

    linenum:       404.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       405.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE 0.3
    comment_4:     APERTURE, USING 0.031" PER STEP.

!

    linenum:       406.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.25X2.0
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.
    comment_3:     THE PRECEDING IS A SEQUENCE TO
    comment_4:     LOCATE THE WIDTH OF THE SLIT,
    comment_5:     USING 0.025" PER STEP.

!

    linenum:       406.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       406.600
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 406.6 PROVIDES 32K ENGINEERING
    comment_3:     DATA FOR FGS ENCODER READINGS DURING
    comment_4:     SCAN IN LINES 407-408,
    comment_5:     AFTER 406.5 BY 15M

!

    linenum:       407.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      2.0-BAR
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.
    comment_3:     THE PRECEDING IS A SEQUENCE TO
    comment_4:     LOCATE THE WIDTH OF THE BAR,
    comment_5:     USING 0.031" PER STEP.

!

    linenum:       408.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.7X2.0-BAR
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.
    comment_3:     THE PRECEDING IS A SEQUENCE TO
    comment_4:     LOCATE THE WIDTH OF THE BAR,
    comment_5:     USING 0.031" PER STEP.

!

    linenum:       408.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       408.900
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.25-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  2.5S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.1,
    param_4:       SCAN-STEP-Y=0.1
    req_1:         ONBOARD ACQ FOR 408.95;

!

    linenum:       408.950
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  2.8S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.03,
    param_4:       SCAN-STEP-Y=0.03
    req_1:         ONBOARD ACQ FOR 409.0-412.9;

!

    linenum:       409.000
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 409 PROVIDES 32K ENGINEERING DATA
    comment_3:     FOR FGS ENCODER READINGS DURING SCAN
    comment_4:     IN LINES 409.1-412.0.

!

    linenum:       409.100
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.25-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       410.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.25-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE
    comment_4:     0.25-LOWER PAIR APERTURES, USING
    comment_5:     0.019" PER STEP.

!

    linenum:       411.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  12S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       412.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  12S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE
    comment_4:     0.1-LOWER PAIR APERTURES, USING
    comment_5:     0.009" PER STEP.

!

    linenum:       412.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       412.900
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.25-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  2.5S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.1,
    param_4:       SCAN-STEP-Y=0.1
    req_1:         ONBOARD ACQ FOR 412.95;

!

    linenum:       412.950
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.1-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  2.8S
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.03,
    param_4:       SCAN-STEP-Y=0.03
    req_1:         ONBOARD ACQ FOR 413-416.5;

!

    linenum:       413.000
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH TO TELEMETRY FORMAT FN
    comment_2:     LINE 413 PROVIDES 32K ENGINEERING DATA
    comment_3:     FOR FGS ENCODER READINGS DURING SCAN
    comment_4:     IN LINES 413.1-416.0.

!

    linenum:       413.100
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.25-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       414.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.25-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  5S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE
    comment_4:     0.25-UPPER APERTURE, USING
    comment_5:     0.019" PER STEP.

!

    linenum:       415.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.1-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  12S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE.

!

    linenum:       416.000
    targname:      STAR-161114+593654
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.1-PAIR-A
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  12S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=4,
    param_3:       COMB=YES
    req_1:         SPATIAL SCAN;
    comment_1:     CENTER POINT IN SCAN SHOULD CENTER
    comment_2:     IN THE APERTURE. THE PRECEDING IS A
    comment_3:     SEQUENCE TO LOCATE THE
    comment_4:     0.1-UPPER APERTURE, USING
    comment_5:     0.009" PER STEP.

!

    linenum:       416.500
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!
! end of exposure logsheet

scan_data:

    line_list:     302,402
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    17
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      1.5000
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    0.75
    wid_offset:    0.0000

!

    line_list:     303,403
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    17
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      1.5000
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:   0.0000
    scan_frame:    S/C
    len_offset:    0.75
    wid_offset:    0.0

!

    line_list:     304,404
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    17
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      0.5000
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    0.25
    wid_offset:    0.0000

!

    line_list:     305,307,308,405,407,408
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    17
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      0.5000
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:   0.0000
    scan_frame:    S/C
    len_offset:    0.25
    wid_offset:    0.0

!

    line_list:     306,406
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    17
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      0.4000
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    0.2
    wid_offset:    0.0000

!

    line_list:     309.1,313.1,409.1,413.1
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    17
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      0.3000
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    0.15
    wid_offset:    0.0000

!

    line_list:     310,314,410,414
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    17
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      0.3000
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:   0.0000
    scan_frame:    S/C
    len_offset:    0.15
    wid_offset:    0.0

!

    line_list:     311,315,411,415
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    17
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      0.1500
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    0.075
    wid_offset:    0.0000

!

    line_list:     312,316,412,416
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    17
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      0.1500
    sides_angle:     0.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:   0.0000
    scan_frame:    S/C
    len_offset:    0.075
    wid_offset:    0.0

!
! end of scan data