!   $Id: 5604,v 5.1 1994/07/27 19:42:10 pepsa Exp $

coverpage:

  title_1:         COSTAR/FOS FINE ALIGNMENT - FOCUS
    title_2:       REPEAT OF 4745 WITH NEW TARGET
    proposal_for:  SMC/COS
    pi_title:      DR.
    pi_fname:      GEORGE
    pi_lname:      HARTIG
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      (410)338-4966
    keywords_1:    COSTAR, SMOV
    hours_pri:     10.58
    num_pri:       1
    fos:           Y
! end of coverpage

abstract:

    line_1:        The following activities will take place during this proposal.
    line_3:        1. Perform two 5 point focus scans centered on the current best
    line_4:        FOS focus position.  Take 4.3 and 0.3 arcsec aperture
    line_5:        spectra at each scan point. The first scan will be done
    line_6:        with the red channel and the second scan with the blue channel.

!
! end of abstract

general_form_proposers:

  lname:           TROELTZSCH
    fname:         JOHN
    mi:            R
    inst:          BALL AEROSPACE
    country:       USA

!

  lname:           HARTIG
    fname:         GEORGE
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           SCIENTIST
    fname:         FOS
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        This activity will satisfy the following COSTAR SMOV
    line_2:        Requirements:
    line_4:        1. Perform FOS fine focus scan. Take FOS spectra covering
    line_5:        a FOS M1 focus range of -.5 mm to .5 mm centered on the
    line_6:        current best focus position.
    line_8:        2. Determine new FOS optical focus.

!

  question:        3
    section:       1
    line_1:        For each FOS channel (red and blue):
    line_2:        A on-board target acquisition will be performed to center the
    line_3:        target in the 4.3 arcsec aperture.  Next a 4.3 arcsec aperture
    line_4:        map will be taken for use in determining new FOS tilt and
    line_5:        focus settings.
    line_7:        The FOS M1 mirror will then be moved to each of the 5 scan
    line_8:        points with spectra being taken at each point. Each data
    line_9:        sequence will consist of the following:
    line_11:       1. Peakup in 0.3 aperture with G160L grating
    line_12:       2. Image mode G160L spectra in 0.3 and 4.3 apertures
    line_14:       The scan grid is shown below. Each grid point is labeled
    line_15:       with order of the focus scan #.  The distance between points
    line_16:       is 0.25 mm.
    line_18:       X(-0.50)-03  X(-0.25)-02  X(0.0)-01  X(+0.25)-05  X(+0.50)-04
    line_20:       This sequence is performed first in the FOS/RD channel, then
    line_21:       in the FOS/BL channel.

!

  question:        5
    section:       1
    line_1:        Prerequisites:
    line_2:        1. COSTAR/FOS Fine Alignment X-Tilt/Y-Tilt (4747).
    line_8:        Real-time Requirements: realtime uplink needed for move
    line_9:        to best FOS COSTAR position at start of observations.

!

  question:        7
    section:       1
    line_1:        Engineering data will be reduced using the ESS and the COSTAR
    line_2:        data analysis system to generate standard sorts and plots.
    line_4:        Sorts and plots will be used to:
    line_5:        1. Verify FOS M1 mechanism movements and performance
    line_6:        2. Verify COSTAR electrical performance
    line_8:        Science data will be analyzed using the COSTAR/FOS data analysis
    line_9:        system.  The following analysis will be performed:
    line_11:       1. Calculate the centroid and encircled energy the image.
    line_12:       2. Calculate the ratio of the 0.3 to 4.3 aperture flux for each
    line_13:       scan point.  Plot the results vs. focus position.
    line_14:       3. Use the results of steps 1 and 2 and the COSTAR
    line_15:       opto-mechanical model to determine new positions for
    line_16:       the focus, X-Tilt, and Y Tilt mechanisms.

!

  question:        7
    section:       2
    line_1:        Certain Data Base Updates:
    line_2:        1. None.
    line_4:        Possible Data Base Updates:
    line_5:        1. Update default SHP mirror positions in PDB table file.

!
!end of general form text

general_form_address:

  lname:           Hartig
    fname:         George
    category:      PI
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4966

!

  lname:           Troeltzsch
    fname:         John
    mi:            R
    category:      CON
    inst:          Ball Aerospace
    addr_1:        P. O. Box 1062
    city:          Boulder
    state:         CO
    zip:           80306
    country:       USA
    phone:         303 939-5781

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        WD0501+527
    name_2:        G191-B2B
    name_3:        GSSS3734-0506
    descr_1:       J,705,702
    pos_1:         RA=05H 05M 30.6S +/- 0.01S,
    pos_2:         DEC=+52D 49' 54.0" +/- 0.2",
    pos_3:         PLATE-ID=0005,
    equinox:       2000
    pm_or_par:     Y
    pos_epoch_bj:  J
    pos_epoch_yr:  1983.10
    ra_pm_val:     0.000497
    ra_pm_unct:    0.000331
    dec_pm_val:    -0.0880
    dec_pm_unct:   0.0050
    comment_1:     THE GUIDE STAR CATALOG NAME
    comment_2:     IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 11.78 +/- 0.02
    fluxnum_2:     2
    fluxval_2:     B = 11.44 +/- 0.02
    fluxnum_3:     3
    fluxval_3:     U = 10.24 +/- 0.02

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEFINE
    sequence_2:    FOSRED
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G160L
    wavelength:    1600-2417
    num_exp:       1
    time_per_exp:  10S
    s_to_n:        60
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       TYPE=UP,
    param_2:       SEARCH-SIZE-X=5,
    param_3:       SEARCH-SIZE-Y=5,
    param_4:       SCAN-STEP-X=.06,
    param_5:       SCAN-STEP-Y=.06,
    req_1:         ONBOARD ACQ FOR 2.0;
    comment_1:     FOS PEAKUP IN 0.3 APERTURE

!

    linenum:       2.000
    sequence_1:    DEFINE
    sequence_2:    FOSRED
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  60.0S
    s_to_n:        60
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.3,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    comment_1:     FOS/RD SPECTRA IN 0.3 APERTURE

!

    linenum:       3.000
    sequence_1:    DEFINE
    sequence_2:    FOSRED
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  60.0S
    s_to_n:        60
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.3,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    comment_1:     FOS/RD SPECTRA IN 4.3 APERTURE

!

    linenum:       4.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLU
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G160L
    wavelength:    1150-2480
    num_exp:       1
    time_per_exp:  30S
    s_to_n:        60
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       TYPE=UP,
    param_2:       SEARCH-SIZE-X=5,
    param_3:       SEARCH-SIZE-Y=5,
    param_4:       SCAN-STEP-X=.06,
    param_5:       SCAN-STEP-Y=.06,
    req_1:         ONBOARD ACQ FOR 5.0;
    comment_1:     FOS PEAKUP IN 0.3 APERTURE

!

    linenum:       5.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLU
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  180.0S
    s_to_n:        60
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.3,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    comment_1:     FOS/BL SPECTRA IN 0.3 APERTURE

!

    linenum:       6.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLU
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  180.0S
    s_to_n:        60
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.3,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    comment_1:     FOS/BL SPECTRA IN 4.3 APERTURE

!

    linenum:       90.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         RT ANALYSIS;
    req_3:         BEFORE 100 BY 2H +/- 2H;
    comment_1:     MOVE ALL FOS COSTAR MECH POSITIONS.

!

    linenum:       100.000
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G160L
    wavelength:    1600-2417
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    param_1:       SEARCH-SIZE-X=1,
    param_2:       SEARCH-SIZE-Y=3,
    param_3:       SCAN-STEP-Y=1.204
    req_1:         ONBOARD ACQ FOR 100.1-110;
    req_2:         SEQ 100.0-210.0 WITHIN 48H;
    req_3:         CYCLE 4 / 90.0-211.0;

!

    linenum:       100.100
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G160L
    wavelength:    1600-2417
    num_exp:       1
    time_per_exp:  1.0S
    priority:      1
    param_1:       SEARCH-SIZE-X=6,
    param_2:       SEARCH-SIZE-Y=2,
    param_3:       SCAN-STEP-X=0.602,
    param_4:       SCAN-STEP-Y=0.602
    req_1:         ONBOARD ACQ FOR 100.2;

!

    linenum:       100.200
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G160L
    wavelength:    1600-2417
    num_exp:       1
    time_per_exp:  2.0S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.172,
    param_4:       SCAN-STEP-Y=0.172
    req_1:         ONBOARD ACQ FOR 102.;

!

    linenum:       102.000
    sequence_1:    USE
    sequence_2:    FOSRED

!

    linenum:       103.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  0.0S
    priority:      1
    param_1:       FOCUS=-0.25,
    param_2:       X-TILT=34.56,Y-TILT=-33.93
    comment_1:     MOVE COSTAR FOS M1 TO
    comment_2:     2ND FOCUS SCAN POSITION
    comment_3:     -.25 MM FROM START

!

    linenum:       104.000
    sequence_1:    USE
    sequence_2:    FOSRED
    req_1:         POS TARG -0.255,-0.488;

!

    linenum:       105.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  0.0S
    priority:      1
    param_1:       FOCUS=-.5,
    param_2:       X-TILT=69.12,Y-TILT=-59.37
    comment_1:     MOVE COSTAR FOS M1 TO
    comment_2:     3RD FOCUS SCAN POSITION
    comment_3:     -.5 MM FROM START

!

    linenum:       106.000
    sequence_1:    USE
    sequence_2:    FOSRED
    req_1:         POS TARG -0.547,-0.983;

!

    linenum:       107.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  0.0S
    priority:      1
    param_1:       FOCUS=+.5,
    param_2:       X-TILT=-69.12,Y-TILT=67.86
    comment_1:     MOVE COSTAR FOS M1 TO
    comment_2:     4TH FOCUS SCAN POSITION
    comment_3:     +.5 MM FROM START

!

    linenum:       108.000
    sequence_1:    USE
    sequence_2:    FOSRED
    req_1:         POS TARG 0.509,0.978;

!

    linenum:       109.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  0.0S
    priority:      1
    param_1:       FOCUS=+.25,
    param_2:       X-TILT=-34.56,Y-TILT=33.93
    comment_1:     MOVE COSTAR FOS M1 TO
    comment_2:     5TH FOCUS SCAN POSITION
    comment_3:     +.25 MM  FROM START

!

    linenum:       110.000
    sequence_1:    USE
    sequence_2:    FOSRED
    req_1:         POS TARG 0.255,0.488;

!

    linenum:       200.000
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G160L
    wavelength:    1150-2480
    num_exp:       1
    time_per_exp:  2.0S
    priority:      1
    param_1:       SEARCH-SIZE-X=1,
    param_2:       SEARCH-SIZE-Y=3,
    param_3:       SCAN-STEP-Y=1.204
    req_1:         ONBOARD ACQ FOR 200.1-210.5;

!

    linenum:       200.100
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G160L
    wavelength:    1150-2480
    num_exp:       1
    time_per_exp:  2.0S
    priority:      1
    param_1:       SEARCH-SIZE-X=6,
    param_2:       SEARCH-SIZE-Y=2,
    param_3:       SCAN-STEP-X=0.602,
    param_4:       SCAN-STEP-Y=0.602
    req_1:         ONBOARD ACQ FOR 200.2;

!

    linenum:       200.200
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G160L
    wavelength:    1150-2480
    num_exp:       1
    time_per_exp:  4.0S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SEARCH-SIZE-Y=5,
    param_3:       SCAN-STEP-X=0.172,
    param_4:       SCAN-STEP-Y=0.172
    req_1:         ONBOARD ACQ FOR 202.;
    req_2:         SEQ 200-210.5 NO GAP;

!

    linenum:       202.000
    sequence_1:    USE
    sequence_2:    FOSBLU

!

    linenum:       203.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  0.0S
    priority:      1
    param_1:       FOCUS=-0.25,
    param_2:       X-TILT=34.56,Y-TILT=-33.93
    comment_1:     MOVE COSTAR FOS M1 TO
    comment_2:     2ND FOCUS SCAN POSITION
    comment_3:     -.25 MM FROM START

!

    linenum:       204.000
    sequence_1:    USE
    sequence_2:    FOSBLU
    req_1:         POS TARG 0.275,-0.467

!

    linenum:       205.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  0.0S
    priority:      1
    param_1:       FOCUS=-.5,
    param_2:       X-TILT=69.12,Y-TILT=-59.37
    comment_1:     MOVE COSTAR FOS M1 TO
    comment_2:     3RD FOCUS SCAN POSITION
    comment_3:     -.5 MM FROM START

!

    linenum:       206.000
    sequence_1:    USE
    sequence_2:    FOSBLU
    req_1:         POS TARG 0.544,-0.974;

!

    linenum:       207.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  0.0S
    priority:      1
    param_1:       FOCUS=+.5,
    param_2:       X-TILT=-69.12,Y-TILT=67.86
    comment_1:     MOVE COSTAR FOS M1 TO
    comment_2:     4TH FOCUS SCAN POSITION
    comment_3:     +.5 MM FROM START

!

    linenum:       208.000
    sequence_1:    USE
    sequence_2:    FOSBLU
    req_1:         POS TARG -0.549,0.936;

!

    linenum:       209.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  0.0S
    priority:      1
    param_1:       FOCUS=+.25,
    param_2:       X-TILT=-34.56,Y-TILT=33.93
    comment_1:     MOVE COSTAR FOS M1 TO
    comment_2:     5TH FOCUS SCAN POSITION
    comment_3:     +.25 MM  FROM START

!

    linenum:       210.000
    sequence_1:    USE
    sequence_2:    FOSBLU
    req_1:         POS TARG -0.275,0.467;

!

    linenum:       210.500
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       211.000
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         RT ANALYSIS;
    req_3:         AFTER 210 BY 12H +/- 2H;
    comment_1:     MOVE ALL FOS COSTAR MECH POSITIONS.

!
! end of exposure logsheet

! No scan data records found