!   $Id: 5601,v 5.1 1994/07/27 19:40:46 pepsa Exp $

coverpage:

  title_1:         GHRS ECH-B WAVELENGTH MONITOR -- CYCLE 4
    proposal_for:  CAL/HRS
    cont_id:       5037
    pi_title:      DR.
    pi_fname:      DAVID
    pi_mi:         R.
    pi_lname:      SODERBLOM
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      410-338-4543
    keywords_1:    HRS, CALIBRATION, CYCLE 4
    hrs:           Y
    pi_position:   GHRS INST SCIENTIST
! end of coverpage

abstract:

    line_1:        This proposal defines the spectral lamp test for
    line_2:        Echelle B. It is an internal test which makes
    line_3:        measurements of the wavelength lamp SC2. It calibrates
    line_4:        the carrousel function, Y deflections, resolving power,
    line_5:        sensitivity, and scattered light.  The wavelength calibration
    line_6:        dispersion constants will be updated in the PODPS
    line_7:        calibration data base.  It will be run every 4 months.
    line_8:        The wavelengths may be out of range according to PEPSI
    line_9:        or TRANS.  Please ignore the errors.

!
! end of abstract

general_form_proposers:

  lname:           SODERBLOM
    fname:         DAVID
    title:         DR.
    mi:            R.
    inst:          STSCI
    country:       USA

!

  lname:           SHERBERT
    fname:         LISA
    title:         MRS.
    mi:            E.
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        HRS CAL Objectives:
    line_2:        Obtain routine calibration data for:
    line_3:        1. Carrousel calibration function coefficients.
    line_4:        2. Wavelength calibration dispersion constants.
    line_5:        3. Y deflection function coefficients.
    line_6:        4. Spectral resolving power, instrument profile.
    line_7:        5. Scattered light.
    line_8:        6. Grating to grating sensitivity.
    line_9:        This test will be run 4 times during Cycle 4.

!

  question:        3
    section:       1
    line_1:        Observations made for Echelle, at 5 carousel positions
    line_2:        and 5 different orders per configuration:
    line_5:        Echelle B: mLAMBDA = 54668,55418,56169,56915,57662
    line_6:        and orders m = 18,21,24,27,and 30.
    line_7:        At each position lamp SC2 will be observed for a total of 50
    line_8:        observations. Each will use substep pattern 7, for 4 samples
    line_9:        per diode. Two point COMB addition will be used. A new
    line_10:       spectrum Y balance offset will be calculated and applied
    line_11:       for each observation.
    line_13:       Some of the wavelengths specified in this proposal are
    line_14:       intentionally beyond the nominal range of the orders
    line_15:       indicated. This is ok.

!

  question:        5
    section:       1
    line_1:        Guiding tolerance: None - internal test only

!

  question:        7
    section:       1
    line_1:        1. Coefficients for the carrousel function and Y deflection
    line_2:        function are monitored.
    line_3:        2. Wavelength calibration dispersion constants are entered
    line_4:        into the PODPS calibration data base.
    line_5:        3. Other parameters are derived for performance monitoring.

!

  question:        8
    section:       1
    line_1:        This internal test does not require special pointing of the
    line_2:        telescope.

!
!end of general form text

general_form_address:

  lname:           SODERBLOM
    fname:         DAVID
    mi:            R.
    title:         DR.
    category:      PI
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA

!
! end of general_form_address records

! No fixed target records found

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       33.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B18
    wavelength:    3037.117
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    req_1:         SEQ 33-57 WITHIN 1D;
    req_2:         SEQ 33-37 NO GAP
    comment_1:     POSITION THE CARROUSEL FOR M-LAMBDA =
    comment_2:     54668.1 AND LEAVE IT FIXED FOR 33-37.
    comment_3:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       34.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B21
    wavelength:    2603.243
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       35.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B24
    wavelength:    2277.838
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       36.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B27
    wavelength:    2024.745
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       37.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B30
    wavelength:    1822.270
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       38.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B18
    wavelength:    3078.767
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    req_1:         SEQ 38-42 NO GAP;
    comment_1:     POSITION THE CARROUSEL FOR M-LAMBDA =
    comment_2:     55417.8 AND LEAVE IT FIXED FOR 38-42.
    comment_3:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       39.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B21
    wavelength:    2638.943
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       40.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B24
    wavelength:    2309.075
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       41.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B27
    wavelength:    2052.511
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       42.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B30
    wavelength:    1847.260
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       43.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B18
    wavelength:    3120.489
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO
    req_1:         SEQ 43-47 NO GAP;
    comment_1:     POSITION THE CARROUSEL FOR M-LAMBDA =
    comment_2:     56168.8 AND LEAVE IT FIXED FOR 43-47.
    comment_3:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       44.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B21
    wavelength:    2674.704
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       45.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B24
    wavelength:    2340.366
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       46.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B27
    wavelength:    2080.326
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       47.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B30
    wavelength:    1872.293
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       48.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B18
    wavelength:    3161.961
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO
    req_1:         SEQ 48-52 NO GAP;
    comment_1:     POSITION THE CARROUSEL FOR M-LAMBDA =
    comment_2:     56915.3 AND LEAVE IT FIXED FOR 48-52.
    comment_3:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       49.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B21
    wavelength:    2710.252
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       50.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B24
    wavelength:    2371.470
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       51.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B27
    wavelength:    2107.974
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       52.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B30
    wavelength:    1897.177
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       53.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B18
    wavelength:    3203.400
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO
    req_1:         SEQ 53-57 NO GAP;
    comment_1:     POSITION THE CARROUSEL FOR M-LAMBDA =
    comment_2:     57661.2 AND LEAVE IT FIXED FOR 53-57.
    comment_3:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       54.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B21
    wavelength:    2745.771
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       55.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B24
    wavelength:    2402.550
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       56.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B27
    wavelength:    2135.600
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       57.000
    sequence_1:    DEF
    sequence_2:    ECHWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-B30
    wavelength:    1922.040
    num_exp:       1
    time_per_exp:  27.2S
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    comment_1:     COMPUTE AND APPLY SPYBAL.

!

    linenum:       100.000
    sequence_1:    USE
    sequence_2:    ECHWAVE
    req_1:         CYCLE 4;

!

    linenum:       200.000
    sequence_1:    USE
    sequence_2:    ECHWAVE
    req_1:         CYCLE 4;

!

    linenum:       300.000
    sequence_1:    USE
    sequence_2:    ECHWAVE
    req_1:         CYCLE 4;

!

    linenum:       400.000
    sequence_1:    USE
    sequence_2:    ECHWAVE
    req_1:         CYCLE 4;

!

    linenum:       500.000
    sequence_1:    USE
    sequence_2:    ECHWAVE
    req_1:         CYCLE 4;

!

    linenum:       600.000
    sequence_1:    USE
    sequence_2:    ECHWAVE
    req_1:         CYCLE 4;

!
! end of exposure logsheet

! No scan data records found