!   $Id: 5595,v 6.1 1994/07/27 19:38:28 pepsa Exp $

coverpage:

  title_1:         GHRS ECH-A WAVELENGTH MONITOR -- CYCLE 4
    proposal_for:  CAL/HRS
    pi_title:      DR.
    pi_fname:      DAVID
    pi_mi:         R.
    pi_lname:      SODERBLOM
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      410-338-4543
    keywords_1:    HRS, CALIBRATION, CYCLE 4
    hrs:           Y
    pi_position:   GHRS INST SCIENTIST
! end of coverpage

abstract:

    line_1:        This proposal defines the spectral lamp test for
    line_2:        Echelle A. It is an internal test which makes
    line_3:        measurements of the wavelength lamp SC2. It calibrates
    line_4:        the carrousel function, Y deflections, resolving power,
    line_5:        sensitivity, and scattered light.
    line_6:        The wavelength calibration dispersion constants will
    line_7:        be updated in the PODPS calibration data base.
    line_9:        It will be run every 4 months.

!
! end of abstract

general_form_proposers:

  lname:           SODERBLOM
    fname:         DAVID
    title:         DR.
    mi:            R.
    inst:          STSCI
    country:       USA

!

  lname:           SHERBERT
    fname:         LISA
    title:         MRS.
    mi:            E.
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        HRS CAL Objectives:
    line_2:        Obtain routine calibration data for:
    line_3:        1. Carrousel calibration function coefficients.
    line_4:        2. Wavelength calibration dispersion constants.
    line_5:        3. Y deflection function coefficients.
    line_6:        4. Spectral resolving power, instrument profile.
    line_7:        5. Scattered light.
    line_8:        6. Grating to grating sensitivity.
    line_9:        This test will be run 4 times during Cycle 4.

!

  question:        3
    section:       1
    line_1:        Lines 300-372  Echelle A at four carrousel positions, with
    line_2:        the same seven orders observed at each
    line_3:        line 380 is one additional short wavelength
    line_4:        for Echelle A
    line_5:        All exposures use substep patterns with 4 samples per diode
    line_6:        width, and two bins to measure background. All exposures
    line_7:        should include an explicit SPYBAL calibration to optimize the
    line_8:        centering of the spectrum on the diode array.
    line_9:        Some of the wavelengths specified in this proposal are
    line_10:       intentionally beyond the nominal range of the orders
    line_11:       indicated.  This is ok.

!

  question:        5
    section:       1
    line_1:        The first execution of this proposal should be scheduled
    line_2:        to correspond to the 2nd execution of the ech-b
    line_3:        wavelength monitor.
    line_4:        Guiding tolerance: None - internal test only

!

  question:        7
    section:       1
    line_1:        1. Coefficients for the carrousel function and Y deflection
    line_2:        function are monitored.
    line_3:        2. Wavelength calibration dispersion constants are entered
    line_4:        into the PODPS calibration data base.
    line_5:        3. Other parameters are derived for performance monitoring.

!

  question:        8
    section:       1
    line_1:        This internal test does not require special pointing of the
    line_2:        telescope.

!
!end of general form text

general_form_address:

  lname:           SODERBLOM
    fname:         DAVID
    mi:            R.
    title:         DR.
    category:      PI
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA

!
! end of general_form_address records

! No fixed target records found

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       300.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A34
    wavelength:    1637.95
    num_exp:       1
    time_per_exp:  136.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    req_1:         SEQ 300-380 WITHIN 1D;
    req_2:         SEQ 300-312 NO GAP;
    comment_1:     POSITION THE CARROUSEL FOR M-LAMBDA =
    comment_2:     55690.309 AND LEAVE IT FIXED FOR
    comment_3:     LINES 300 - 312.
    comment_4:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       302.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A37
    wavelength:    1505.14
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       304.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A40
    wavelength:    1392.26
    num_exp:       1
    time_per_exp:  136.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       306.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A43
    wavelength:    1295.12
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       308.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A46
    wavelength:    1210.66
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       310.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A47
    wavelength:    1184.90
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       312.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A48
    wavelength:    1160.21
    num_exp:       1
    time_per_exp:  136.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       320.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A34
    wavelength:    1651.26
    num_exp:       1
    time_per_exp:  136.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=2.0
    req_1:         SEQ 320-332 NO GAP;
    comment_1:     POSITION THE CARROUSEL FOR M-LAMBDA =
    comment_2:     56142.783 AND LEAVE IT FIXED FOR
    comment_3:     LINES 320 - 332.
    comment_4:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       322.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A37
    wavelength:    1517.37
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       324.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A40
    wavelength:    1403.57
    num_exp:       1
    time_per_exp:  136.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       326.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A43
    wavelength:    1305.65
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       328.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A46
    wavelength:    1220.50
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       330.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A47
    wavelength:    1194.53
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       332.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A48
    wavelength:    1169.64
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       340.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A34
    wavelength:    1664.46
    num_exp:       1
    time_per_exp:  136.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=2.0
    req_1:         SEQ 340-352 NO GAP;
    comment_1:     POSITION THE CARROUSEL FOR M-LAMBDA =
    comment_2:     56591.919 AND LEAVE IT FIXED FOR
    comment_3:     LINES 340 - 352.
    comment_4:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       342.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A37
    wavelength:    1529.51
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       344.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A40
    wavelength:    1414.80
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       346.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A43
    wavelength:    1316.09
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       348.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A46
    wavelength:    1230.26
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       350.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A47
    wavelength:    1204.08
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       352.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A48
    wavelength:    1179.00
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       360.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A34
    wavelength:    1677.84
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    req_1:         SEQ 360-372 NO GAP;
    comment_1:     POSITION THE CARROUSEL FOR M-LAMBDA =
    comment_2:     57046.657 AND LEAVE IT FIXED FOR
    comment_3:     LINES 360 - 372.
    comment_4:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       362.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A37
    wavelength:    1541.80
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       364.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A40
    wavelength:    1426.17
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       366.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A43
    wavelength:    1326.67
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       368.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A46
    wavelength:    1240.14
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       370.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A47
    wavelength:    1213.76
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       372.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A48
    wavelength:    1188.47
    num_exp:       1
    time_per_exp:  68.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=1.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       380.000
    sequence_1:    DEFINE
    sequence_2:    ECHAWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    ECH-A49
    wavelength:    1151.00
    num_exp:       1
    time_per_exp:  272.0S
    s_to_n:        50
    fluxnum_1:     1
    priority:      1
    param_1:       STEP-PATT=7,
    param_2:       COMB=TWO,
    param_3:       STEP-TIME=2.0
    comment_1:     COMPUTE AND APPLY NEW SPYBAL

!

    linenum:       500.000
    sequence_1:    USE
    sequence_2:    ECHAWAVE
    req_1:         CYCLE 4;
    comment_1:     BEGIN AFTER EBBET'S SPEC_LAMP PROP.
    comment_2:     1ST EXECUTION OF THIS PROPOSAL SHOULD
    comment_3:     CORRESPOND TO 2ND EXECUTION OF SIDE 2
    comment_4:     EQUIVALENT.
!

    linenum:       600.000
    sequence_1:    USE
    sequence_2:    ECHAWAVE
    req_1:         CYCLE 4;
    comment_1:     BEGIN AFTER EBBET'S SPEC_LAMP PROP.
    comment_2:     1ST EXECUTION OF THIS PROPOSAL SHOULD
    comment_3:     CORRESPOND TO 2ND EXECUTION OF SIDE 2
    comment_4:     EQUIVALENT.
!

    linenum:       700.000
    sequence_1:    USE
    sequence_2:    ECHAWAVE
    req_1:         CYCLE 4;
    comment_1:     BEGIN AFTER EBBET'S SPEC_LAMP PROP.
    comment_2:     1ST EXECUTION OF THIS PROPOSAL SHOULD
    comment_3:     CORRESPOND TO 2ND EXECUTION OF SIDE 2
    comment_4:     EQUIVALENT.
!

    linenum:       800.000
    sequence_1:    USE
    sequence_2:    ECHAWAVE
    req_1:         CYCLE 4;
    comment_1:     BEGIN AFTER EBBET'S SPEC_LAMP PROP.
    comment_2:     1ST EXECUTION OF THIS PROPOSAL SHOULD
    comment_3:     CORRESPOND TO 2ND EXECUTION OF SIDE 2
    comment_4:     EQUIVALENT.

!
! end of exposure logsheet

! No scan data records found