!   $Id: 5582,v 4.1 1994/07/27 19:30:57 pepsa Exp $

coverpage:

  title_1:         FOC/48 MONTHLY ACTIVATION (CAMERA SECTION ONLY)- CYCLE 4
    sci_cat:       ENGINEERING
    sci_subcat:    CALIBRATION
    proposal_for:  ENG/FOC
    pi_fname:      MANFRED
    pi_lname:      MIEBACH
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      410-338-4544
    keywords_1:    CALIBRATION,ENGINEERING
    foc:           Y
    time_crit:     N
    pi_position:   FOC ENGINEER
! end of coverpage

abstract:

    line_1:        This is an FOC engineering program needed
    line_2:        to RE-ACTIVATE the FOC/48 detector according to
    line_3:        CARD item 3.4.2.1 every 30 days.
    line_4:        In order to avoid HV-ON cycles on the Intensifier
    line_5:        HV Power Supplies the Camera Section is turned ON
    line_6:        ONLY.

!
! end of abstract

general_form_proposers:

  lname:           MIEBACH
    fname:         MANFRED
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

! No records found

general_form_address:

  lname:           MIEBACH
    fname:         MANFRED
    category:      PI
    inst:          STScI
    addr_1:        3700 San Martin Drive
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410-338-4544

!
! end of general_form_address records

! No fixed target records found

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEFINE
    sequence_2:    F48TURNON
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  4M
    priority:      1
    req_1:         CYCLE 4
    comment_1:     QASISTATES=FOC:HOLD,DET:STDBY48
    comment_2:     QGACTINST=EXF48REAC
    comment_3:     SEQ 1-3 NO GAP

!

    linenum:       2.000
    sequence_1:    DEFINE
    sequence_2:    F48TURNON
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         CYCLE 4; AFTER 1 BY 20M
    comment_1:     QASISTATES=FOC:HOLD,DET:STDBY48
    comment_2:     QGACTINST=EXCVTSB48

!

    linenum:       3.000
    sequence_1:    DEFINE
    sequence_2:    F48TURNON
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         CYCLE 4
    comment_1:     QASISTATES=FOC:HOLD,DET:HOLD
    comment_2:     QGACTINST=QDUMMY

!

    linenum:       10.000
    sequence_1:    USE
    sequence_2:    F48TURNON

!

    linenum:       20.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 30D +/- 7D;

!

    linenum:       30.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 60D +/- 7D;

!

    linenum:       40.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 90D +/- 7D;

!

    linenum:       50.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 120D +/- 7D;

!

    linenum:       60.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 150D +/- 7D;

!

    linenum:       70.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 180D +/- 7D;

!

    linenum:       80.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 210D +/- 7D;

!

    linenum:       90.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 240D +/- 7D;

!

    linenum:       100.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 270D +/- 7D;

!

    linenum:       110.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 300D +/- 7D;

!

    linenum:       120.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 330D +/- 7D;

!

    linenum:       130.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 360D +/- 7D;

!

    linenum:       140.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 390D +/- 7D;

!

    linenum:       150.000
    sequence_1:    USE
    sequence_2:    F48TURNON
    req_1:         AFTER 10 BY 420D +/- 7D;

!
! end of exposure logsheet

! No scan data records found