!   $Id: 5542,v 7.1 1994/07/27 19:08:33 pepsa Exp $

coverpage:

  title_1:         GHRS SIDE 1 WAVELENGTH MONITOR (1ST ORDER GRATINGS)--CYCLE 4
    proposal_for:  CAL/HRS
    pi_fname:      DAVE
    pi_lname:      SODERBLOM
    pi_inst:       STSCI
    pi_country:    USA
    keywords_1:    HRS, CALIBRATION, CYCLE 4, SIDE 1
    hrs:           Y
    pi_position:   GHRS INST SCI.
! end of coverpage

abstract:

    line_1:        This proposal defines the spectral cal lamp mini-functional
    line_2:        test for the first order gratings. It is an internal test
    line_3:        which makes measurements of the lamp (SC2). It is used to
    line_4:        monitor the carrousel function, Y deflections, resolving
    line_5:        power, and sensitivity. It will be run for basic calibrations.

!
! end of abstract

general_form_proposers:

  lname:           SODERBLOM
    fname:         DAVE
    inst:          STSCI
    country:       USA

!

  lname:           SHERBERT
    fname:         LISA
    mi:            E.
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        GHRS CAL Objectives:
    line_2:        Obtain routine calibration data to monitor:
    line_3:        1. Carrousel calibration function coefficients.
    line_4:        2. Wavelength calibration dispersion constants.
    line_5:        3. Y deflection function coefficients.
    line_6:        4. Spectral resolving power, instrument profile.

!

  question:        3
    section:       1
    line_1:        Observations will be made for the following first order gratings:
    line_2:        Grating G140M at 6 carrousel positions, for central wavelengths
    line_3:        1165, 1215, 1254, 1330, 1405, and 1525 Angstroms.
    line_4:        Grating G140L at 4 carrousel positions, for central wavelengths
    line_5:        1200, 1400, 1600, and 1800 Angstroms.
    line_7:        At each position, one spectral lamp (SC2) will be observed .
    line_8:        Each observation will use substep pattern 3, with 4 samples per diode.
    line_9:        The 2 point comb addition feature will be used, and a new spectrum
    line_10:       Y balance offset will be calculated for each observation.

!

  question:        5
    section:       1
    line_1:        Repeats approximately every 4 months.
    line_2:        Different gratings are independent tests, and need not
    line_3:        be run together, or in any particular order.
    line_5:        Should begin ONE(1) month after proposal 5277.
    line_9:        Guiding Tolerance: None - internal test only

!

  question:        7
    section:       1
    line_1:        1. Coefficients for the carrousel function and Y deflection
    line_2:        function can be monitored.
    line_3:        2. Wavelength calibration dispersion constants are monitored.
    line_4:        3. Other parameters are derived for performance monitoring.

!

  question:        8
    section:       1
    line_1:        This is an internal test and does not require any special
    line_2:        pointing of the telescope. This test does not require the
    line_3:        GHRS to be the prime science instrument.
    line_4:        There is no target list with this proposal.

!
!end of general form text

general_form_address:

  lname:           SODERBLOM
    fname:         DAVE
    category:      PI
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA

!
! end of general_form_address records

! No fixed target records found

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.100
    sequence_1:    DEFINE
    sequence_2:    G140MWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    G140M
    wavelength:    1165
    num_exp:       1
    time_per_exp:  128S
    priority:      1
    param_1:       STEP-PATT=3 ,
    param_2:       COMB=TWO
    req_1:         SEQ 1.1-1.6 NO GAP;
    comment_1:     COMPUTE AND APPLY SPECTRUM Y BALANCE.

!

    linenum:       1.200
    sequence_1:    DEFINE
    sequence_2:    G140MWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    G140M
    wavelength:    1215
    num_exp:       1
    time_per_exp:  128S
    priority:      1
    param_1:       STEP-PATT=3 ,
    param_2:       COMB=TWO
    comment_1:     COMPUTE AND APPLY SPECTRUM Y BALANCE.

!

    linenum:       1.300
    sequence_1:    DEFINE
    sequence_2:    G140MWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    G140M
    wavelength:    1254
    num_exp:       1
    time_per_exp:  128S
    priority:      1
    param_1:       STEP-PATT=3 ,
    param_2:       COMB=TWO
    comment_1:     COMPUTE AND APPLY SPECTRUM Y BALANCE.

!

    linenum:       1.400
    sequence_1:    DEFINE
    sequence_2:    G140MWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    G140M
    wavelength:    1330
    num_exp:       1
    time_per_exp:  128S
    priority:      1
    param_1:       STEP-PATT=3 ,
    param_2:       COMB=TWO
    comment_1:     COMPUTE AND APPLY SPECTRUM Y BALANCE.

!

    linenum:       1.500
    sequence_1:    DEFINE
    sequence_2:    G140MWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    G140M
    wavelength:    1405
    num_exp:       1
    time_per_exp:  128S
    priority:      1
    param_1:       STEP-PATT=3 ,
    param_2:       COMB=TWO
    comment_1:     COMPUTE AND APPLY SPECTRUM Y BALANCE.

!

    linenum:       1.600
    sequence_1:    DEFINE
    sequence_2:    G140MWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    G140M
    wavelength:    1525
    num_exp:       1
    time_per_exp:  128S
    priority:      1
    param_1:       STEP-PATT=3 ,
    param_2:       COMB=TWO
    comment_1:     COMPUTE AND APPLY SPECTRUM Y BALANCE.

!

    linenum:       2.100
    sequence_1:    DEFINE
    sequence_2:    G140LWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    G140L
    wavelength:    1200
    num_exp:       1
    time_per_exp:  25.6S
    priority:      1
    param_1:       STEP-PATT=3 ,
    param_2:       COMB=TWO
    req_1:         SEQ 2.1-2.4 NO GAP;
    comment_1:     COMPUTE AND APPLY SPECTRUM Y BALANCE.

!

    linenum:       2.200
    sequence_1:    DEFINE
    sequence_2:    G140LWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    G140L
    wavelength:    1400
    num_exp:       1
    time_per_exp:  25.6S
    priority:      1
    param_1:       STEP-PATT=3 ,
    param_2:       COMB=TWO
    comment_1:     COMPUTE AND APPLY SPECTRUM Y BALANCE.

!

    linenum:       2.300
    sequence_1:    DEFINE
    sequence_2:    G140LWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    G140L
    wavelength:    1600
    num_exp:       1
    time_per_exp:  25.6S
    priority:      1
    param_1:       STEP-PATT=3 ,
    param_2:       COMB=TWO
    comment_1:     COMPUTE AND APPLY SPECTRUM Y BALANCE.

!

    linenum:       2.400
    sequence_1:    DEFINE
    sequence_2:    G140LWAVE
    targname:      WAVE
    config:        HRS
    opmode:        ACCUM
    aperture:      SC2
    sp_element:    G140L
    wavelength:    1800
    num_exp:       1
    time_per_exp:  25.6S
    priority:      1
    param_1:       STEP-PATT=3 ,
    param_2:       COMB=TWO
    comment_1:     COMPUTE AND APPLY SPECTRUM Y BALANCE.

!

    linenum:       200.000
    sequence_1:    USE
    sequence_2:    G140LWAVE
    req_1:         REPEAT 200 EVERY
    req_2:         112D +/- 5D
    req_3:         FOR 3 MORE TIMES;
    req_4:         CYCLE 4 / 1.1-200;
    comment_1:     BEGIN AFTER EBBET'S SPEC_LAMP PROP.
    comment_2:     1ST EXECUTION OF THIS PROPOSAL SHOULD
    comment_3:     CORRESPOND TO 2ND EXECUTION OF SIDE 2
    comment_4:     EQUIVALENT.

!
! end of exposure logsheet

! No scan data records found