!   $Id: 5539,v 17.1 1994/11/30 17:50:44 pepsa Exp $

coverpage:

  title_1:         CYCLE 4 FOS PHOTOMETRIC MONITOR
    proposal_for:  CAL/FOS
    pi_fname:      CHARLES (TONY)
    pi_lname:      KEYES
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      410-338-4975
    hours_pri:     7.50
    num_pri:       1
    fos:           Y
! end of coverpage

abstract:

    line_1:        A measurement of the absolute sensitivity of
    line_2:        the FOS detectors will be performed using a UV standard star.
    line_3:        The highest priority gratings will be used in the 4.3 arcsec
    line_4:        aperture.  Measurement of aperture throughput ratio will
    line_5:        be made with all usable spectral elements for the single
    line_6:        apertures expected to be most commonly used in Cycle 4.
    line_7:        A four stage peakup of the standard star should provide
    line_8:        excellent centering in the small apertures. The switch to
    line_9:        the second side followed by the peakup in the 0.3 aperture
    line_10:       determines an accurate measure of the separation of the blue and
    line_11:       red side apertures in the focal plane with no extra expenditure of observing
    line_12:       time.  Six stars will be observed.  Aperture throughput
    line_13:       will be determined on one star only.

!
! end of abstract

general_form_proposers:

  lname:           KEYES
    fname:         CHARLES (TONY)
    title:         P.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           BOHLIN
    fname:         RALPH
    title:         C.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           KORATKAR
    fname:         ANURADHA
    title:         C.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           KINNEY
    fname:         ANNE
    title:         C.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           TAYLOR
    fname:         CYNTHIA
    title:         C.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        These measurements will provide the full photometric
    line_2:        calibration of the FOS in Cycle 4.

!

  question:        3
    section:       1
    line_1:        Spectra of a UV standard star will be obtained in 6 blue detector and 5 red
    line_2:        detector-grating combinations.  To assure registration of the spectrum on the
    line_3:        diode array, the stars will be observed at 3 y-bases with an 8-10 micron
    line_4:        separation.  Most of the spectra will be obtained in the 1.0
    line_5:        arcsec aperture, however, one star also will be observed
    line_6:        with the alll usable dispersers through the 4.3, 0.5, and 0.3
    line_7:        apertures to calibrate them.
    line_8:        Standard star BD+28D4211 is the primary object to be
    line_9:        observed - it will be used for aperture throughput observations.
    line_10:       HZ44, NGC7293, and BD+75 will be observed with 1.0
    line_11:       aperture ONLY.  Lastly BD+64 will be observed twice as a
    line_12:       candidate for future use as a CVZ standard star.

!

  question:        5
    section:       1
    line_1:        PREREQUISITES:
    line_2:        1) Pointing stability of 10% of the smallest aperture used
    line_3:        (0.3") - 0.03" - is required.

!

  question:        7
    section:       1
    line_1:        Data reduction will be performed at the STScI with the results used
    line_2:        to update the RSDP inverse sensitivity files and to determine the need for a
    line_3:        full photometric recalibration of the FOS.

!
!end of general form text

general_form_address:

  lname:           KEYES
    fname:         CHARLES (TONY)
    category:      PI
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA
    phone:         410-338-4975

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        BD+28D4211
    name_2:        GSC 2214-1198
    descr_1:       J,702
    pos_1:         RA = 21H 51M 11.1S +/- 0.01S,
    pos_2:         DEC = +28D 51' 51.8" +/- 0.2",
    pos_3:         PLATE-ID=01LR
    equinox:       2000
    comment_1:     THE GSC NAME IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 10.53 +/- 0.05
    fluxnum_2:     2
    fluxval_2:     B = 10.19 +/- 0.05

!

    targnum:       2
    name_1:        BD+33D2642
    name_2:        GSC2575-481
    descr_1:       J,702
    pos_1:         RA = 15H 51M 59.9S +/- 0.02S,
    pos_2:         DEC = +32D 56' 54.8" +/- 0.3",
    pos_3:         PLATE-ID=01RN
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V = 10.83 +/- 0.05
    fluxnum_2:     2
    fluxval_2:     B = 10.66 +/- 0.05

!

    targnum:       3
    name_1:        HZ-44
    name_2:        GSC2541-142
    descr_1:       J,702
    pos_1:         RA = 13H 23M 35.4S +/- 0.02S,
    pos_2:         DEC = +36D 08' 00.0" +/- 0.3",
    pos_3:         PLATE-ID=01QW
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V = 11.71 +/- 0.05

!

    targnum:       4
    name_1:        WD0501+527
    name_2:        G191-B2B
    name_3:        GSSS3734-0506
    descr_1:       J,705,702
    pos_1:         RA=05H 05M 30.6S +/- 0.01S,
    pos_2:         DEC=+52D 49' 54.0" +/- 0.2"
    equinox:       2000
    pm_or_par:     Y
    pos_epoch_bj:  J
    pos_epoch_yr:  1983.10
    ra_pm_val:     0.000500
    ra_pm_unct:    0.000300
    dec_pm_val:    -0.0880
    dec_pm_unct:   0.0050
    comment_1:     THE GUIDE STAR CATALOG NAME
    comment_2:     IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 11.78 +/- 0.02
    fluxnum_2:     2
    fluxval_2:     B = 11.44 +/- 0.02
    fluxnum_3:     3
    fluxval_3:     U = 10.24 +/- 0.02

!

    targnum:       5
    name_1:        BD+75D325
    name_2:        GSC4380-2196
    descr_1:       J,702
    pos_1:         RA = 08H 10M 49.3S +/- 0.003S,
    pos_2:         DEC = +74D 57' 57.5" +/- 0.2",
    pos_3:         PLATE-ID=00LQ
    equinox:       2000
    comment_1:     THE GSSS NAME IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 9.54 +/- 0.05
    fluxnum_2:     2
    fluxval_2:     B = 9.17 +/- 0.05

!

    targnum:       6
    name_1:        NGC7293-CSTAR
    descr_1:       J,702
    pos_1:         RA = 22H 29M 38.5S +/- 0.003S,
    pos_2:         DEC = -20D 50' 13.3" +/- 0.2",
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V = 13.43 +/- 0.1
    fluxnum_2:     2
    fluxval_2:     B = 13.09 +/- 0.1

!

    targnum:       7
    name_1:        GRW+70D5824
    name_3:        GSSS4405-1633
    descr_1:       J,702
    pos_1:         RA = 13H 38M 51.8S +/- 0.003S,
    pos_2:         DEC = +70D 17' 08.5" +/- 0.2",
    equinox:       2000
    pm_or_par:     Y
    pos_epoch_bj:  J
    pos_epoch_yr:  1983.30
    ra_pm_val:     0.074500
    ra_pm_unct:    0.000300
    dec_pm_val:    -0.0120
    dec_pm_unct:   0.0050
    comment_1:     THE GSSS NAME IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 12.79 +/- 0.1
    fluxnum_2:     2
    fluxval_2:     B = 12.70 +/- 0.1

!

    targnum:       8
    name_1:        BD+64D106
    name_2:        GSC4025-1481
    descr_1:       J,702
    pos_1:         RA = 00H 57M 36.705S +/- 0.25S,
    pos_2:         DEC = +64D 51' 35.05" +/- 0.25",
    pos_3:         PLATE-ID=00MB
    equinox:       2000
    pm_or_par:     N
    pos_epoch_bj:  J
    pos_epoch_yr:  1950.00
    comment_1:     TENTATIVE FLUX STANDARD
    fluxnum_1:     1
    fluxval_1:     V=10.3 +/- 0.5

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEFINE
    sequence_2:    PTARG
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    #
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    param_1:       SEARCH-SIZE-X=1,
    param_2:       SEARCH-SIZE-Y=3,
    param_3:       SCAN-STEP-Y=1.204
    req_1:         SEQ 1-3 NO GAP;

!

    linenum:       2.000
    sequence_1:    DEFINE
    sequence_2:    PTARG
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    #
    num_exp:       1
    time_per_exp:  1.0S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=6,
    param_2:       SEARCH-SIZE-Y=2,
    param_3:       SCAN-STEP-X=0.602,
    param_4:       SCAN-STEP-Y=0.602,

!

    linenum:       3.000
    sequence_1:    DEFINE
    sequence_2:    PTARG
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    #
    num_exp:       1
    time_per_exp:  2.00S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SCAN-STEP-X=0.172,
    param_3:       SEARCH-SIZE-Y=5,
    param_4:       SCAN-STEP-Y=0.172
    comment_1:     PEAK-UP SEQUENCE;

!

    linenum:       4.000
    sequence_1:    DEFINE
    sequence_2:    PTWEAK
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    #
    num_exp:       1
    time_per_exp:  4.S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SCAN-STEP-X=0.052,
    param_3:       SEARCH-SIZE-Y=5,
    param_4:       SCAN-STEP-Y=0.052
    comment_1:     TWEAK UP TARGET IN 0.3 APERTURE;

!

    linenum:       4.100
    sequence_1:    DEFINE
    sequence_2:    PTWEAKA
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      0.25-PAIR-A
    sp_element:    #
    num_exp:       1
    time_per_exp:  4.S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=3,
    param_2:       SCAN-STEP-X=0.15,
    param_3:       SEARCH-SIZE-Y=3,
    param_4:       SCAN-STEP-Y=0.15
    comment_1:     TWEAK UP TARG IN 0.25-PAIR-A AP;

!

    linenum:       4.200
    sequence_1:    DEFINE
    sequence_2:    PTWEAKA
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      0.25-PAIR-A
    sp_element:    #
    num_exp:       1
    time_per_exp:  4.S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SCAN-STEP-X=0.052,
    param_3:       SEARCH-SIZE-Y=5,
    param_4:       SCAN-STEP-Y=0.052
    comment_1:     TWEAK UP TARG IN 0.25-PAIR-A AP;

!

    linenum:       4.300
    sequence_1:    DEFINE
    sequence_2:    PTWEAKB
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      0.25-PAIR-B
    sp_element:    #
    num_exp:       1
    time_per_exp:  4.S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=3,
    param_2:       SCAN-STEP-X=0.15,
    param_3:       SEARCH-SIZE-Y=3,
    param_4:       SCAN-STEP-Y=0.15
    comment_1:     TWEAK UP TARG IN 0.25-PAIR-B AP;

!

    linenum:       4.400
    sequence_1:    DEFINE
    sequence_2:    PTWEAKB
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      0.25-PAIR-B
    sp_element:    #
    num_exp:       1
    time_per_exp:  4.S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SCAN-STEP-X=0.052,
    param_3:       SEARCH-SIZE-Y=5,
    param_4:       SCAN-STEP-Y=0.052
    comment_1:     TWEAK UP TARG IN 0.25-PAIR-B AP;

!

    linenum:       5.000
    sequence_1:    DEFINE
    sequence_2:    SLITWEAK
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      0.25X2.0
    sp_element:    #
    num_exp:       1
    time_per_exp:  4.0S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=7,
    param_2:       SEARCH-SIZE-Y=1,
    param_3:       SCAN-STEP-X=0.05,
    comment_1:     TWEAK UP TARGET IN 0.25X2.0 APERTURE;

!

    linenum:       10.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  147S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 10-12 NO GAP;

!

    linenum:       11.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  28S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       12.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  5S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       20.000
    sequence_1:    DEFINE
    sequence_2:    REDFULL
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  90S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 20-22.6 NO GAP;

!

    linenum:       21.000
    sequence_1:    DEFINE
    sequence_2:    REDFULL
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  15S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       22.100
    sequence_1:    DEFINE
    sequence_2:    REDFULL
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  531S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       22.200
    sequence_1:    DEFINE
    sequence_2:    REDFULL
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  240S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       22.300
    sequence_1:    DEFINE
    sequence_2:    REDFULL
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  180S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       22.400
    sequence_1:    DEFINE
    sequence_2:    REDFULL
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       22.500
    sequence_1:    DEFINE
    sequence_2:    REDFULL
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF,

!

    linenum:       22.600
    sequence_1:    DEFINE
    sequence_2:    REDFULL
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  21S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       30.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  101S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 30-32 NO GAP;

!

    linenum:       31.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  366S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       32.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  14S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       33.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-A
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=31.2,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF
    req_1:         SEQ 33-36.5 NO GAP;

!

    linenum:       33.500
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-A
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  371S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=31.2,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       34.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-A
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  80S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=31.2,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       34.500
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-A
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  55S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=31.2,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       35.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-B
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  55S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=31.2,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       35.500
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-B
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=31.2,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       36.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-B
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  371S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=31.2,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       36.500
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-B
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  80S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=31.2,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       40.000
    sequence_1:    DEFINE
    sequence_2:    BLUFULL
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  55S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 40-42.4 NO GAP;

!

    linenum:       42.000
    sequence_1:    DEFINE
    sequence_2:    BLUFULL
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       42.100
    sequence_1:    DEFINE
    sequence_2:    BLUFULL
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  371S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       42.200
    sequence_1:    DEFINE
    sequence_2:    BLUFULL
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  180S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       42.300
    sequence_1:    DEFINE
    sequence_2:    BLUFULL
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       42.400
    sequence_1:    DEFINE
    sequence_2:    BLUFULL
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  30S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       50.000
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  810S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 50-52.6 NO GAP;

!

    linenum:       51.000
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  270S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       52.100
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  900S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF,

!

    linenum:       52.200
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  480S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       52.300
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  300S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       52.400
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  240S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       52.500
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  690S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF,

!

    linenum:       52.600
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  10S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       60.000
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 60-62.4 NO GAP;

!

    linenum:       62.000
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  360S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       62.100
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  480S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       62.200
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  480S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       62.300
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  300S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF,

!

    linenum:       62.400
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  20S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       70.000
    sequence_1:    DEFINE
    sequence_2:    RED-NOPRI
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  90S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 70-72.5 NO GAP;

!

    linenum:       71.000
    sequence_1:    DEFINE
    sequence_2:    RED-NOPRI
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  15S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       72.100
    sequence_1:    DEFINE
    sequence_2:    RED-NOPRI
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  531S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       72.200
    sequence_1:    DEFINE
    sequence_2:    RED-NOPRI
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  240S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       72.300
    sequence_1:    DEFINE
    sequence_2:    RED-NOPRI
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  180S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       72.400
    sequence_1:    DEFINE
    sequence_2:    RED-NOPRI
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       72.500
    sequence_1:    DEFINE
    sequence_2:    RED-NOPRI
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       73.000
    sequence_1:    DEFINE
    sequence_2:    REDNP78
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  90S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 73-75.5 NO GAP;

!

    linenum:       74.000
    sequence_1:    DEFINE
    sequence_2:    REDNP78
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  15S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       75.200
    sequence_1:    DEFINE
    sequence_2:    REDNP78
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  240S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       75.300
    sequence_1:    DEFINE
    sequence_2:    REDNP78
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  180S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       75.400
    sequence_1:    DEFINE
    sequence_2:    REDNP78
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       75.500
    sequence_1:    DEFINE
    sequence_2:    REDNP78
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       80.000
    sequence_1:    DEFINE
    sequence_2:    BLU-NOPRI
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  55S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 80-82.3 NO GAP;

!

    linenum:       82.000
    sequence_1:    DEFINE
    sequence_2:    BLU-NOPRI
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       82.100
    sequence_1:    DEFINE
    sequence_2:    BLU-NOPRI
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  371S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       82.200
    sequence_1:    DEFINE
    sequence_2:    BLU-NOPRI
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  180S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       82.300
    sequence_1:    DEFINE
    sequence_2:    BLU-NOPRI
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       90.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R-PR
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 90-92.5 NO GAP;

!

    linenum:       92.100
    sequence_1:    DEFINE
    sequence_2:    BD28-R-PR
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  531S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       92.200
    sequence_1:    DEFINE
    sequence_2:    BD28-R-PR
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       92.300
    sequence_1:    DEFINE
    sequence_2:    BD28-R-PR
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       92.500
    sequence_1:    DEFINE
    sequence_2:    BD28-R-PR
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       200.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G270H
    req_1:         SEQ 200-203.5 NO GAP;
    req_2:         ONBOARD ACQ FOR 200.1;
    req_3:         CYCLE 4 / 200-919.4;
    req_4:         AT 27-JUN-1994 +/- 20D;

!

    linenum:       200.100
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 203.05;

!

    linenum:       203.050
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      BD+28D4211
    aperture:      0.3

!

    linenum:       203.100
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      BD+28D4211
    aperture:      1.0

!

    linenum:       203.200
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      BD+28D4211
    aperture:      0.5

!

    linenum:       203.300
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      BD+28D4211
    aperture:      4.3

!

    linenum:       203.400
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      BD+28D4211
    aperture:      1.0-PAIR-A

!

    linenum:       203.500
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      BD+28D4211
    aperture:      1.0-PAIR-B

!

    linenum:       210.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+28D4211
    config:        FOS/RD
    sp_element:    G270H
    req_1:         SEQ 210-220 NO GAP;
    req_2:         ONBOARD ACQ FOR 216;
    req_3:         AT 27-JUN-1994 +/- 25D;

!

    linenum:       216.000
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+28D4211
    config:        FOS/RD
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 219.1;

!

    linenum:       219.100
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      BD+28D4211
    aperture:      0.3

!

    linenum:       219.200
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      BD+28D4211
    aperture:      1.0

!

    linenum:       219.300
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      BD+28D4211
    aperture:      0.5

!

    linenum:       219.400
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      BD+28D4211
    aperture:      4.3

!

    linenum:       219.500
    sequence_1:    USE
    sequence_2:    SLITWEAK
    targname:      BD+28D4211
    config:        FOS/RD
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 220;

!

    linenum:       220.000
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      BD+28D4211
    aperture:      0.25X2.0

!

    linenum:       230.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+28D4211
    config:        FOS/RD
    sp_element:    G270H
    req_1:         SEQ 230-235 NO GAP;
    req_2:         ONBOARD ACQ FOR 231;
    req_3:         AT 27-JUN-1994 +/- 15D

!

    linenum:       231.000
    sequence_1:    USE
    sequence_2:    PTWEAKA
    targname:      BD+28D4211
    config:        FOS/RD
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 232

!

    linenum:       232.000
    sequence_1:    USE
    sequence_2:    REDNP78
    targname:      BD+28D4211
    aperture:      0.25-PAIR-A

!

    linenum:       232.500
    sequence_1:    USE
    sequence_2:    REDNP78
    targname:      BD+28D4211
    aperture:      0.5-PAIR-A

!

    linenum:       233.000
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      BD+28D4211
    aperture:      1.0-PAIR-A

!

    linenum:       233.200
    sequence_1:    USE
    sequence_2:    PTWEAKB
    targname:      BD+28D4211
    config:        FOS/RD
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 233.5

!

    linenum:       233.500
    sequence_1:    USE
    sequence_2:    REDNP78
    targname:      BD+28D4211
    aperture:      0.25-PAIR-B

!

    linenum:       234.000
    sequence_1:    USE
    sequence_2:    REDNP78
    targname:      BD+28D4211
    aperture:      0.5-PAIR-B

!

    linenum:       234.500
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      BD+28D4211
    aperture:      1.0-PAIR-B

!

    linenum:       235.000
    targname:      BD+28D4211
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  90S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       250.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G270H
    req_1:         SEQ 250-256 NO GAP;
    req_2:         ONBOARD ACQ FOR 250.1;
    req_3:         AT 15-MAY-1994 +/- 15D;

!

    linenum:       250.100
    sequence_1:    USE
    sequence_2:    PTWEAKA
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 251.0;

!

    linenum:       251.000
    sequence_1:    USE
    sequence_2:    BLU-NOPRI
    targname:      BD+28D4211
    aperture:      0.25-PAIR-A

!

    linenum:       252.000
    sequence_1:    USE
    sequence_2:    BLU-NOPRI
    targname:      BD+28D4211
    aperture:      0.5-PAIR-A

!

    linenum:       252.300
    sequence_1:    USE
    sequence_2:    PTWEAKB
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 253

!

    linenum:       253.000
    sequence_1:    USE
    sequence_2:    BLU-NOPRI
    targname:      BD+28D4211
    aperture:      0.25-PAIR-B

!

    linenum:       254.000
    sequence_1:    USE
    sequence_2:    BLU-NOPRI
    targname:      BD+28D4211
    aperture:      0.5-PAIR-B

!

    linenum:       254.500
    targname:      BD+28D4211
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=31.2,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       254.800
    targname:      BD+28D4211
    config:        FOS/BL
    opmode:        ACCUM
    aperture:      1.0
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  120S
    fluxnum_1:     1
    priority:      1

!

    linenum:       255.000
    sequence_1:    USE
    sequence_2:    SLITWEAK
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 256;

!

    linenum:       256.000
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      BD+28D4211
    aperture:      0.25X2.0

!

    linenum:       300.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+33D2642
    config:        FOS/BL
    sp_element:    G270H
    req_1:         SEQ 300-303.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 300.1;
    req_3:         AT 15-FEB-1995 +/- 15D;

!

    linenum:       300.100
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+33D2642
    config:        FOS/BL
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 303.1;

!

    linenum:       303.100
    sequence_1:    USE
    sequence_2:    BLU-NOPRI
    targname:      BD+33D2642
    aperture:      4.3

!

    linenum:       310.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+33D2642
    config:        FOS/RD
    sp_element:    G270H
    req_1:         SEQ 310-319.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 316;
    req_3:         AT 15-FEB-1995 +/- 15D;

!

    linenum:       316.000
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+33D2642
    config:        FOS/RD
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 319.1;

!

    linenum:       319.100
    sequence_1:    USE
    sequence_2:    RED-NOPRI
    targname:      BD+33D2642
    aperture:      4.3

!

    linenum:       400.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      WD0501+527
    config:        FOS/BL
    sp_element:    G270H
    time_per_exp:  X1.4
    req_1:         SEQ 400-403.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 400.1;
    req_3:         AT 15-AUG-1994 +/- 15D;
    req_4:         COND IF PI APPROVES SCHEDULING
    comment_1:     USE ONLY WITH INSTR SCI
    comment_2:     APPROVAL

!

    linenum:       400.100
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      WD0501+527
    config:        FOS/BL
    sp_element:    G270H
    time_per_exp:  X1.4
    req_1:         ONBOARD ACQ FOR 403.1;
    req_2:         COND IF PI APPROVES SCHEDULING

!

    linenum:       403.100
    sequence_1:    USE
    sequence_2:    G191-B-43
    targname:      WD0501+527
    req_1:         COND IF PI APPROVES SCHEDULING

!

    linenum:       410.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      WD0501+527
    config:        FOS/RD
    sp_element:    G270H
    req_1:         SEQ 410-419.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 416;
    req_3:         AT 15-AUG-1994 +/- 15D;
    req_4:         COND IF PI APPROVES SCHEDULING
    comment_1:     USE ONLY WITH INSTR SCI
    comment_2:     APPROVAL

!

    linenum:       416.000
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      WD0501+527
    config:        FOS/RD
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 419.1;
    req_2:         COND IF PI APPROVES SCHEDULING

!

    linenum:       419.100
    sequence_1:    USE
    sequence_2:    G191-R-43
    targname:      WD0501+527
    req_1:         COND IF PI APPROVES SCHEDULING

!

    linenum:       500.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+75D325
    config:        FOS/BL
    sp_element:    G270H
    req_1:         SEQ 500-503.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 500.1;
    req_3:         AT 30-DEC-1994 +/- 15D;
    comment_1:     EPOCH 4 OF 6 IVS OBS.

!

    linenum:       500.100
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+75D325
    config:        FOS/BL
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 503.1;

!

    linenum:       503.100
    sequence_1:    USE
    sequence_2:    BLU-NOPRI
    targname:      BD+75D325
    aperture:      4.3
    time_per_exp:  X0.5

!

    linenum:       510.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+75D325
    config:        FOS/RD
    sp_element:    G270H
    req_1:         SEQ 510-519.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 516;
    req_3:         AT 30-DEC-1994 +/- 15D;
    comment_1:     EPOCH 4 OF 6 IVS OBS.

!

    linenum:       516.000
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+75D325
    config:        FOS/RD
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 519.1;

!

    linenum:       519.100
    sequence_1:    USE
    sequence_2:    RED-NOPRI
    targname:      BD+75D325
    aperture:      4.3
    time_per_exp:  X0.5

!

    linenum:       600.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      NGC7293-CSTAR
    config:        FOS/BL
    sp_element:    G270H
    req_1:         SEQ 600-603.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 600.1;
    req_3:         AT 15-JUL-1994 +/- 14D;
    comment_1:     EPOCH 2 OF 6 IVS OBS.

!

    linenum:       600.100
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      NGC7293-CSTAR
    config:        FOS/BL
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 603.1;

!

    linenum:       603.100
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      NGC7293-CSTAR
    aperture:      1.0
    time_per_exp:  X3.0

!

    linenum:       610.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      NGC7293-CSTAR
    config:        FOS/RD
    sp_element:    G270H
    req_1:         SEQ 610-619.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 616;
    req_3:         AT 15-JUL-1994 +/- 14D;
    comment_1:     EPOCH 2 OF 6 IVS OBS.

!

    linenum:       616.000
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      NGC7293-CSTAR
    config:        FOS/RD
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 619.1;

!

    linenum:       619.100
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      NGC7293-CSTAR
    aperture:      1.0
    time_per_exp:  X3.0

!

    linenum:       800.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      HZ-44
    config:        FOS/BL
    sp_element:    G270H
    time_per_exp:  X1.4
    req_1:         SEQ 800-803.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 800.1;
    req_3:         AT 15-APR-1995 +/- 15D;
    comment_1:     EPOCH 5 OF 6 IVS OBS.

!

    linenum:       800.100
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      HZ-44
    config:        FOS/BL
    sp_element:    G270H
    time_per_exp:  X1.4
    req_1:         ONBOARD ACQ FOR 803.1;

!

    linenum:       803.100
    sequence_1:    USE
    sequence_2:    G191-B-43
    targname:      HZ-44

!

    linenum:       810.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      HZ-44
    config:        FOS/RD
    sp_element:    G270H
    req_1:         SEQ 810-819.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 816;
    req_3:         AT 15-APR-1995 +/- 15D;
    comment_1:     EPOCH 5 OF 6 IVS OBS.

!

    linenum:       816.000
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      HZ-44
    config:        FOS/RD
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 819.1;

!

    linenum:       819.100
    sequence_1:    USE
    sequence_2:    G191-R-43
    targname:      HZ-44

!

    linenum:       900.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G270H
    req_1:         SEQ 900-903.4 NO GAP;
    req_2:         ONBOARD ACQ FOR 900.1;
    req_3:         AT 30-JUN-1995 +/- 15D;
    comment_1:     EPOCH 6 OF 6 IVS OBS.

!

    linenum:       900.100
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 903.1;

!

    linenum:       903.100
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      BD+28D4211
    aperture:      0.3

!

    linenum:       903.200
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      BD+28D4211
    aperture:      1.0

!

    linenum:       903.300
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      BD+28D4211
    aperture:      0.5

!

    linenum:       903.400
    sequence_1:    USE
    sequence_2:    BLUFULL
    targname:      BD+28D4211
    aperture:      4.3

!

    linenum:       910.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+28D4211
    config:        FOS/RD
    sp_element:    G270H
    req_1:         SEQ 910-919.4 NO GAP;
    req_2:         ONBOARD ACQ FOR 916;
    req_3:         AT 30-JUN-1995 +/- 15D;
    comment_1:     EPOCH 6 OF 6 IVS OBS.

!

    linenum:       916.000
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+28D4211
    config:        FOS/RD
    sp_element:    G270H
    req_1:         ONBOARD ACQ FOR 919.1

!

    linenum:       919.100
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      BD+28D4211
    aperture:      0.3

!


    linenum:       919.200
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      BD+28D4211
    aperture:      1.0

!


    linenum:       919.300
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      BD+28D4211
    aperture:      0.5

!


    linenum:       919.400
    sequence_1:    USE
    sequence_2:    REDFULL
    targname:      BD+28D4211
    aperture:      4.3

!
! end of exposure logsheet

! No scan data records found