coverpage: title_1: CYCLE 4 FOS SPECTRAL FLAT FIELDS AND MONITOR proposal_for: CAL/FOS pi_fname: CHARLES (TONY) pi_lname: KEYES pi_inst: STSCI pi_country: USA pi_phone: 410-338-4975 num_pri: 1 fos: Y pi_position: I.S. ! end of coverpage abstract: line_1: Some FOS detector/disperser combinations have shown temporal line_2: variations in their flat field structure during SV and Cycle line_3: 1. This set of observations will produce additional flat line_4: field calibrations appropriate to the Cycle 4 time period. line_5: At one epoch during Cycle 4, high S/N spectra are obtained line_6: for G191B2B, which has a relatively featureless spectrum and line_7: which has been the primary target for earlier flat field line_8: observations. Observations are made through the 1.0 aperture. line_9: with all usable detector/disperser combinations. This line_10: epoch doubles as an IVS measurement. On three other occasions line_11: three REDside spectral elements will be monitored with line_12: 1.0 aperture. ! ! end of abstract general_form_proposers: lname: KEYES fname: CHARLES (TONY) inst: STSCI country: USA ! lname: KINNEY fname: ANNE inst: STSCI country: USA ! lname: KORATKAR fname: ANURADHA inst: STSCI country: USA ! lname: TAYLOR fname: CYNTHIA inst: STSCI country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: This set of observations will produce additional flat line_2: field calibrations appropriate to the Cycle 4 time period. line_3: At one epoch during Cycle 4, high S/N spectra are obtained line_4: for G191B2B, which has a relatively featureless spectrum and line_5: which has been the primary target in earlier flat field line_6: calibration proposals. Observations are made through the 1.0 line_7: arcsec aperture. This observation doubles as an IVS line_8: measurement as well and must be scheduled in the designated line_9: time period. line_10: All detector/disperser combinations will be used. At one line_11: additional epoch three REDside spectral elements will be line_12: monitored with 1.0 aperture. ! question: 6 section: 1 line_1: This proposal will provide a contemporaneous flat field line_2: for the PODPS pipeline calibration of Cycle 3 data. ! question: 7 section: 1 line_1: Data reduction will be performed at the STScI, and the analysis will be line_2: performed using STScI computer facilities. This is a calibration, so the line_3: resulting data will need to be added to CDBS for use in the PODPS pipeline. ! !end of general form text general_form_address: lname: KEYES fname: CHARLES (TONY) category: PI inst: STSCI addr_1: SPD addr_2: RM S203B city: BALTIMORE state: MD zip: 21218 country: USA phone: 410-338-4975 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: WD0501+527 name_2: G191-B2B name_3: GSSS3734-0506 descr_1: J,705,702 pos_1: RA=05H 05M 30.6S +/- 0.01S, pos_2: DEC=+52D 49' 54.0" +/- 0.2", pos_3: PLATE-ID=0005, equinox: 2000 pm_or_par: Y pos_epoch_bj: J pos_epoch_yr: 1983.10 ra_pm_val: 0.000497 ra_pm_unct: 0.000331 dec_pm_val: -0.0880 dec_pm_unct: 0.0050 comment_1: THE GUIDE STAR CATALOG NAME comment_2: IS GIVEN. fluxnum_1: 1 fluxval_1: V = 11.78 +/- 0.02 fluxnum_2: 2 fluxval_2: B = 11.44 +/- 0.02 fluxnum_3: 3 fluxval_3: U = 10.24 +/- 0.02 ! targnum: 2 name_1: BD+28D4211 descr_1: J,702 pos_1: RA = 21H 51M 11.1S +/- 0.01S, pos_2: DEC = +28D 51' 51.8" +/- 0.2", pos_3: PLATE-ID=01LR, equinox: 2000 comment_1: THE GSC NAME IS GIVEN. fluxnum_1: 1 fluxval_1: V = 10.53 +/- 0.05 fluxnum_2: 2 fluxval_2: B = 10.19 +/- 0.05 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 4.3 sp_element: G270H num_exp: 1 time_per_exp: 2.0S priority: 1 param_1: SEARCH-SIZE-X=1, param_2: SEARCH-SIZE-Y=3, param_3: SCAN-STEP-Y=1.204 req_1: ONBOARD ACQ FOR 1.1; req_2: SEQ 1.000-10.800 NO GAP; ! linenum: 1.100 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 2.0S priority: 1 param_1: SEARCH-SIZE-X=6, param_2: SEARCH-SIZE-Y=2, param_3: SCAN-STEP-X=0.602, param_4: SCAN-STEP-Y=0.602 req_1: ONBOARD ACQ FOR 1.2; ! linenum: 1.200 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 4.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.172, param_4: SCAN-STEP-Y=0.172 req_1: ONBOARD ACQ FOR 1.25; ! linenum: 1.250 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 12.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.052, param_4: SCAN-STEP-Y=0.052 req_1: ONBOARD ACQ FOR 7.000-10.800; ! linenum: 7.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: G570H num_exp: 1 time_per_exp: 960S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 7.100 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACCUM aperture: 1.0 sp_element: G570H num_exp: 1 time_per_exp: 960S s_to_n: 200 priority: 1 req_1: POS TARG 0.,+0.20 comment_1: UPPER OFFSET FLAT CHECK ! linenum: 7.200 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACCUM aperture: 1.0 sp_element: G570H num_exp: 1 time_per_exp: 960S s_to_n: 200 priority: 1 req_1: POS TARG 0.,-0.20 comment_1: LOWER OFFSET FLAT CHECK ! linenum: 8.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: G400H num_exp: 1 time_per_exp: 810S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 8.100 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACCUM aperture: 1.0 sp_element: G400H num_exp: 1 time_per_exp: 810S s_to_n: 200 priority: 1 req_1: POS TARG 0.,+0.20 comment_1: UPPER OFFSET FLAT CHECK ! linenum: 8.200 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACCUM aperture: 1.0 sp_element: G400H num_exp: 1 time_per_exp: 810S s_to_n: 200 priority: 1 req_1: POS TARG 0.,-0.20 comment_1: LOWER OFFSET FLAT CHECK ! linenum: 10.600 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: G190H num_exp: 1 time_per_exp: 810S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 10.610 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACCUM aperture: 1.0 sp_element: G190H num_exp: 1 time_per_exp: 810S s_to_n: 200 priority: 1 req_1: POS TARG 0.,+0.20 comment_1: UPPER OFFSET FLAT CHECK ! linenum: 10.620 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACCUM aperture: 1.0 sp_element: G190H num_exp: 1 time_per_exp: 810S s_to_n: 200 priority: 1 req_1: POS TARG 0.,-0.20 comment_1: LOWER OFFSET FLAT CHECK ! linenum: 10.700 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: G160L num_exp: 1 time_per_exp: 270S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 10.800 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 690S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 10.810 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACCUM aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 690S s_to_n: 200 priority: 1 req_1: POS TARG 0.,+0.20 comment_1: UPPER OFFSET FLAT CHECK ! linenum: 10.820 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACCUM aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 690S s_to_n: 200 priority: 1 req_1: POS TARG 0.,-0.20 comment_1: LOWER OFFSET FLAT CHECK ! linenum: 11.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACQ/PEAK aperture: 4.3 sp_element: G270H num_exp: 1 time_per_exp: 4.0S priority: 1 param_1: SEARCH-SIZE-X=1, param_2: SEARCH-SIZE-Y=3, param_3: SCAN-STEP-Y=1.204 req_1: ONBOARD ACQ FOR 11.1; req_2: SEQ 11-23 NO GAP; ! linenum: 11.100 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACQ/PEAK aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 4.0S priority: 1 param_1: SEARCH-SIZE-X=6, param_2: SEARCH-SIZE-Y=2, param_3: SCAN-STEP-X=0.602, param_4: SCAN-STEP-Y=0.602, req_1: ONBOARD ACQ FOR 11.2; ! linenum: 11.200 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 4.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.172, param_4: SCAN-STEP-Y=0.172 req_1: ONBOARD ACQ FOR 11.25; ! linenum: 11.250 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 12.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.052, param_4: SCAN-STEP-Y=0.052 req_1: ONBOARD ACQ FOR 19-23; ! linenum: 19.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACCUM aperture: 4.3 sp_element: G160L num_exp: 1 time_per_exp: 60S s_to_n: 100 priority: 1 ! linenum: 19.100 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: G400H num_exp: 1 time_per_exp: 1260S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 20.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: G130H num_exp: 1 time_per_exp: 1080S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 20.100 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACCUM aperture: 1.0 sp_element: G130H num_exp: 1 time_per_exp: 1080S s_to_n: 200 priority: 1 req_1: POS TARG 0.,+0.20 comment_1: UPPER OFFSET FLAT CHECK ! linenum: 20.200 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACCUM aperture: 1.0 sp_element: G130H num_exp: 1 time_per_exp: 1080S s_to_n: 200 priority: 1 req_1: POS TARG 0.,-0.20 comment_1: LOWER OFFSET FLAT CHECK ! linenum: 20.300 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACCUM aperture: 4.3 sp_element: G130H num_exp: 1 time_per_exp: 240S s_to_n: 100 priority: 1 ! linenum: 21.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: G190H num_exp: 1 time_per_exp: 1080S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 21.100 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACCUM aperture: 1.0 sp_element: G190H num_exp: 1 time_per_exp: 1080S s_to_n: 200 priority: 1 req_1: POS TARG 0.,+0.20 comment_1: UPPER OFFSET FLAT CHECK ! linenum: 21.200 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACCUM aperture: 1.0 sp_element: G190H num_exp: 1 time_per_exp: 1080S s_to_n: 200 priority: 1 req_1: POS TARG 0.,-0.20 comment_1: LOWER OFFSET FLAT CHECK ! linenum: 22.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 480S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 22.100 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACCUM aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 480S s_to_n: 200 priority: 1 req_1: POS TARG 0.,+0.20 comment_1: UPPER OFFSET FLAT CHECK ! linenum: 22.200 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACCUM aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 480S s_to_n: 200 priority: 1 req_1: POS TARG 0.,-0.20 comment_1: LOWER OFFSET FLAT CHECK ! linenum: 23.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: G160L num_exp: 1 time_per_exp: 180S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 41.000 sequence_1: DEFINE sequence_2: RDMON targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 4.3 sp_element: G270H num_exp: 1 time_per_exp: 2.0S priority: 1 param_1: SEARCH-SIZE-X=1, param_2: SEARCH-SIZE-Y=3, param_3: SCAN-STEP-Y=1.204 req_1: ONBOARD ACQ FOR 41.1; req_2: SEQ 41.0-47.0 NO GAP; ! linenum: 41.100 sequence_1: DEFINE sequence_2: RDMON targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 2.0S priority: 1 param_1: SEARCH-SIZE-X=6, param_2: SEARCH-SIZE-Y=2, param_3: SCAN-STEP-X=0.602, param_4: SCAN-STEP-Y=0.602 req_1: ONBOARD ACQ FOR 41.2; ! linenum: 41.200 sequence_1: DEFINE sequence_2: RDMON targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 4.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.172, param_4: SCAN-STEP-Y=0.172 req_1: ONBOARD ACQ FOR 41.25; ! linenum: 41.250 sequence_1: DEFINE sequence_2: RDMON targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 12.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.052, param_4: SCAN-STEP-Y=0.052 req_1: ONBOARD ACQ FOR 45.0-47.0; ! linenum: 45.000 sequence_1: DEFINE sequence_2: RDMON targname: # config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: G160L num_exp: 1 time_per_exp: 270S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 46.000 sequence_1: DEFINE sequence_2: RDMON targname: # config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 690S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 47.000 sequence_1: DEFINE sequence_2: RDMON targname: # config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: G190H num_exp: 1 time_per_exp: 810S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=31.2, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 98.000 sequence_1: USE sequence_2: G191BL targname: WD0501+527 req_1: AT 15-NOV-1994 +/- 14D; req_2: CYCLE 4 / 98-100 ! linenum: 99.000 sequence_1: USE sequence_2: G191RD targname: WD0501+527 req_1: AT 15-NOV-1994 +/- 14D ! linenum: 100.000 sequence_1: USE sequence_2: RDMON targname: WD0501+527 req_1: AT 15-FEB-1995 +/- 14D ! ! end of exposure logsheet ! No scan data records found