! $Id: 5536,v 5.1 1994/07/27 19:04:18 pepsa Exp $ coverpage: title_1: CYCLE 4 FOS WAVELENGTH CALIBRATION: INTERNAL/EXTERNAL OFFSETS proposal_for: CAL/FOS pi_fname: CHARLES (TONY) pi_lname: KEYES pi_inst: STSCI pi_country: USA pi_phone: 410-338-4975 num_pri: 1 fos: Y ! end of coverpage abstract: line_1: Offsets between internal and external wavelength scales will line_2: be measured for 4 gratings on the blue side and for 5 line_3: gratings on the red side. This test will be performed line_4: using the 0.3" aperture and two external sources. Derived line_5: offsets can be applied to the polynomial fit of pixel line_6: number versus wavelength determined from the lines in the line_7: internal Pt/Cr-Ne lamp. Internal sources make up a small line_8: fraction of the exposure time and must be acquired at the line_9: same time as the external sources, so they can NOT be line_10: scheduled as parallel observations. ! ! end of abstract general_form_proposers: lname: KEYES fname: CHARLES (TONY) inst: STSCI country: USA ! lname: KINNEY fname: ANNE inst: STSCI country: USA ! lname: KORATKAR fname: ANURADHA inst: STSCI country: USA ! lname: BOHLIN fname: RALPH inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! lname: TAYLOR fname: CYNTHIA inst: STSCI country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: In this test, we will obtain spectra of external and internal wavelength line_2: calibration sources, and compare the resulting channel versus wavelength line_3: relationships to search for any offset between the two. The external line_4: objects, as well as the internal Pt-Ne lamp, will be observed line_5: through one aperture, the 0.3 aperture. The primary velocity line_6: target, NGC 6833, has insufficient lines in the G130H spectral line_7: region, so the second target is required for this grating. line_8: Both sources are observed with sufficient RED and BLUE line_9: spectral elements in order to place all observations on the line_10: same velocity system. ! question: 5 section: 1 line_1: line_2: In the time between the individual exposure pieces, the FOS line_3: filter grating wheel MUST NOT be moved. This includes the homing of line_4: the instrument that would occur if a non-FOS observation is line_5: inserted in the time between the pieces. This restriction line_6: also applies to the internal WAVE observations - the filter line_7: grating wheel MUST NOT be moved between the external and line_8: internal observations. ! question: 6 section: 1 line_1: We require an internal Pt/Cr-Ne lamp observations immediately following line_2: each external observation. ! question: 7 section: 1 line_1: Data reduction and analysis will be performed at the STScI. line_2: Wavelength offsets found between in internal and external sources will line_3: need to be incorporated into the dispersion coefficients used by the line_4: PODPS pipeline. ! !end of general form text general_form_address: lname: KEYES fname: CHARLES (TONY) category: PI inst: STSCI addr_1: 3700 SAN MARTIN DR. city: BALTIMORE state: MD zip: 21218 country: USA ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: NGC6833 name_2: PK82+11D1 descr_1: G,502,922,J,703 pos_1: RA= 19H 49M 46.639S +/- 0.1S, pos_2: DEC= +48D 57' 39.6" +/- 1.0S equinox: 2000 pm_or_par: N comment_3: LOG F(H-BETA) = -11.22 comment_4: E(B-V) = 0.74 fluxnum_1: 1 fluxval_1: V=14.0 ! targnum: 2 name_1: HD207757 descr_1: A,155,J,703 pos_1: RA= 21H 51M 02.010S +/- 0.1S, pos_2: DEC= +12D 37' 31.70" +/- 1.0S equinox: 2000 pm_or_par: N comment_1: E(B-V) = 0.12 fluxnum_1: 1 fluxval_1: V=8.6 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 30.000 sequence_1: DEFINE sequence_2: TAR-B-1 targname: # config: FOS/BL opmode: ACCUM aperture: 0.3 sp_element: G190H num_exp: 1 time_per_exp: 1200S fluxnum_1: 1 priority: 1 req_1: GROUP 30-31 NON-INT; ! linenum: 31.000 sequence_1: DEFINE sequence_2: TAR-B-1 targname: WAVE config: ^ opmode: ACCUM aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: CALIB FOR 30 NO SLEW; ! linenum: 34.000 sequence_1: DEFINE sequence_2: TAR-B-1 targname: # config: ^ opmode: ACCUM aperture: ^ sp_element: G270H num_exp: 1 time_per_exp: 900S fluxnum_1: 1 priority: 1 req_1: GROUP 34-35 NON-INT; ! linenum: 35.000 sequence_1: DEFINE sequence_2: TAR-B-1 targname: WAVE config: ^ opmode: ACCUM aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: CALIB FOR 34 NO SLEW ! linenum: 36.000 sequence_1: DEFINE sequence_2: TAR-B-1 targname: WAVE config: ^ opmode: ACCUM aperture: ^ sp_element: G400H num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: CALIB FOR 37 NO SLEW; req_2: GROUP 36-37 NON-INT; ! linenum: 37.000 sequence_1: DEFINE sequence_2: TAR-B-1 targname: # config: ^ opmode: ACCUM aperture: ^ sp_element: G400H num_exp: 1 time_per_exp: 360S fluxnum_1: 1 priority: 1 ! linenum: 50.000 sequence_1: DEFINE sequence_2: TAR-R-1 targname: # config: FOS/RD opmode: ACCUM aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 600S fluxnum_1: 1 priority: 1 req_1: GROUP 50 - 51 NON-INT; ! linenum: 51.000 sequence_1: DEFINE sequence_2: TAR-R-1 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: CALIB FOR 50 NO SLEW; ! linenum: 52.000 sequence_1: DEFINE sequence_2: TAR-R-1 targname: WAVE config: ^ opmode: ACCUM aperture: ^ sp_element: G190H num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: GROUP 52-53 NON-INT; req_2: CALIB FOR 53 NO SLEW; ! linenum: 53.000 sequence_1: DEFINE sequence_2: TAR-R-1 targname: # config: FOS/RD opmode: ACCUM aperture: 0.3 sp_element: G190H num_exp: 1 time_per_exp: 900S fluxnum_1: 1 priority: 1 ! linenum: 54.000 sequence_1: DEFINE sequence_2: TAR-R-1 targname: # config: FOS/RD opmode: RAPID aperture: 0.3 sp_element: G570H num_exp: 1 time_per_exp: 240S fluxnum_1: 1 priority: 1 param_1: READ-TIME=20, req_1: GROUP 54-55 NON-INT; ! linenum: 55.000 sequence_1: DEFINE sequence_2: TAR-R-1 targname: WAVE config: ^ opmode: ACCUM aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: CALIB FOR 54 NO SLEW; ! linenum: 56.000 sequence_1: DEFINE sequence_2: TAR-R-1 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: CALIB FOR 57 NO SLEW; req_2: GROUP 56-57 NON-INT; ! linenum: 57.000 sequence_1: DEFINE sequence_2: TAR-R-1 targname: # config: ^ opmode: ACCUM aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: 240S fluxnum_1: 1 priority: 1 ! linenum: 58.000 sequence_1: DEFINE sequence_2: TAR-R-1 targname: # config: FOS/RD opmode: RAPID aperture: 0.3 sp_element: G780H num_exp: 1 time_per_exp: 240S fluxnum_1: 1 priority: 1 param_1: READ-TIME=30, req_1: GROUP 58-59 NON-INT; ! linenum: 59.000 sequence_1: DEFINE sequence_2: TAR-R-1 targname: WAVE config: ^ opmode: ACCUM aperture: ^ sp_element: ^ num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: CALIB FOR 58 NO SLEW; ! linenum: 130.500 sequence_1: DEFINE sequence_2: TAR-B-2 targname: # config: FOS/BL opmode: RAPID aperture: 0.3 sp_element: G130H num_exp: 1 time_per_exp: 2400S fluxnum_1: 1 priority: 1 param_1: READ-TIME=30 req_1: GROUP 130.5-130.7 NON-INT; ! linenum: 130.700 sequence_1: DEFINE sequence_2: TAR-B-2 targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.3 sp_element: G130H num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: CALIB FOR 130.5 NO SLEW; ! linenum: 131.500 sequence_1: DEFINE sequence_2: TAR-B-2 targname: # config: FOS/BL opmode: RAPID aperture: 0.3 sp_element: G190H num_exp: 1 time_per_exp: 900S fluxnum_1: 1 priority: 1 param_1: READ-TIME=30, req_1: GROUP 131.5-131.6 NON-INT; ! linenum: 131.600 sequence_1: DEFINE sequence_2: TAR-B-2 targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.3 sp_element: G190H num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: CALIB FOR 131.5 NO SLEW; ! linenum: 134.000 sequence_1: DEFINE sequence_2: TAR-B-2 targname: # config: FOS/BL opmode: RAPID aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 390S fluxnum_1: 1 priority: 1 param_1: READ-TIME=30, req_1: GROUP 134-135 NON-INT; ! linenum: 135.000 sequence_1: DEFINE sequence_2: TAR-B-2 targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: CALIB FOR 134 NO SLEW; ! linenum: 153.500 sequence_1: DEFINE sequence_2: TAR-R-2 targname: # config: FOS/RD opmode: RAPID aperture: 0.3 sp_element: G190H num_exp: 1 time_per_exp: 600S fluxnum_1: 1 priority: 1 param_1: READ-TIME=30 req_1: GROUP 153.5-153.6 NON-INT; ! linenum: 153.600 sequence_1: DEFINE sequence_2: TAR-R-2 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.3 sp_element: G190H num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: CALIB FOR 153.5 NO SLEW; ! linenum: 153.700 sequence_1: DEFINE sequence_2: TAR-R-2 targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: DEF fluxnum_1: 1 priority: 1 req_1: GROUP 153.7-153.8 NON-INT; req_2: CALIB FOR 153.8 NO SLEW; ! linenum: 153.800 sequence_1: DEFINE sequence_2: TAR-R-2 targname: # config: FOS/RD opmode: RAPID aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: 240S fluxnum_1: 1 priority: 1 param_1: READ-TIME=30 ! linenum: 230.000 sequence_1: DEFINE sequence_2: TAR-B-1A targname: # config: FOS/BL opmode: ACCUM aperture: # sp_element: G190H num_exp: 1 time_per_exp: 1200S fluxnum_1: 1 priority: 1 ! linenum: 237.000 sequence_1: DEFINE sequence_2: TAR-B-1A targname: # config: FOS/BL opmode: ACCUM aperture: # sp_element: G400H num_exp: 1 time_per_exp: 360S fluxnum_1: 1 priority: 1 ! linenum: 253.000 sequence_1: DEFINE sequence_2: TAR-R-1A targname: # config: FOS/RD opmode: ACCUM aperture: # sp_element: G190H num_exp: 1 time_per_exp: 900S fluxnum_1: 1 priority: 1 ! linenum: 254.000 sequence_1: DEFINE sequence_2: TAR-R-1A targname: # config: FOS/RD opmode: RAPID aperture: # sp_element: G570H num_exp: 1 time_per_exp: 240S fluxnum_1: 1 priority: 1 param_1: READ-TIME=20 ! linenum: 257.000 sequence_1: DEFINE sequence_2: TAR-R-1A targname: # config: FOS/RD opmode: ACCUM aperture: # sp_element: G400H num_exp: 1 time_per_exp: 240S fluxnum_1: 1 priority: 1 ! linenum: 281.500 sequence_1: DEFINE sequence_2: TAR-B-2A targname: # config: FOS/BL opmode: RAPID aperture: # sp_element: G190H num_exp: 1 time_per_exp: 900S fluxnum_1: 1 priority: 1 param_1: READ-TIME=30 ! linenum: 283.000 sequence_1: DEFINE sequence_2: TAR-B-2A targname: # config: FOS/BL opmode: RAPID aperture: # sp_element: G130H num_exp: 1 time_per_exp: 2400S fluxnum_1: 1 priority: 1 param_1: READ-TIME=30 ! linenum: 284.000 sequence_1: DEFINE sequence_2: TAR-B-2A targname: # config: FOS/BL opmode: RAPID aperture: # sp_element: G270H num_exp: 1 time_per_exp: 420S fluxnum_1: 1 priority: 1 param_1: READ-TIME=30 ! linenum: 505.000 targname: NGC6833 config: FOS/RD opmode: ACQ/PEAK aperture: 4.3 sp_element: G400H num_exp: 1 time_per_exp: 10.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=1, param_2: SEARCH-SIZE-Y=3, param_3: SCAN-STEP-Y=1.204 req_1: CYCLE 4/30-521; req_2: SEQ 505-505.3 NO GAP; req_3: ONBOARD ACQ FOR 505.1; req_4: GROUP 505-519 WITHIN 28D ! linenum: 505.100 targname: NGC6833 config: FOS/RD opmode: ACQ/PEAK aperture: 1.0 sp_element: G400H num_exp: 1 time_per_exp: 10.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=6, param_2: SEARCH-SIZE-Y=2, param_3: SCAN-STEP-X=0.602, param_4: SCAN-STEP-Y=0.602 req_1: ONBOARD ACQ FOR 505.2; ! linenum: 505.200 targname: NGC6833 config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: 15.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.172, param_4: SCAN-STEP-Y=0.172 req_1: ONBOARD ACQ FOR 505.3; ! linenum: 505.300 targname: NGC6833 config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: 20.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SCAN-STEP-X=0.05, param_3: SEARCH-SIZE-Y=5, param_4: SCAN-STEP-Y=0.05 req_1: ONBOARD ACQ FOR 508-508.2 comment_1: RED TARGET ACQUISITION SEQUENCE; ! linenum: 508.000 sequence_1: USE sequence_2: TAR-R-1 targname: NGC6833 ! linenum: 508.100 sequence_1: USE sequence_2: TAR-R-1A targname: NGC6833 aperture: 1.0 time_per_exp: X0.5 ! linenum: 508.200 sequence_1: USE sequence_2: TAR-R-1A targname: NGC6833 aperture: 4.3 time_per_exp: X0.5 ! linenum: 508.300 targname: NGC6833 config: FOS/BL opmode: ACQ/PEAK aperture: 4.3 sp_element: G400H num_exp: 1 time_per_exp: 15.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=1, param_2: SEARCH-SIZE-Y=3, param_3: SCAN-STEP-Y=1.204 req_1: ONBOARD ACQ FOR 508.31; req_2: SEQ 508.3-508.5 NO GAP; ! linenum: 508.310 targname: NGC6833 config: FOS/BL opmode: ACQ/PEAK aperture: 1.0 sp_element: G400H num_exp: 1 time_per_exp: 15.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=6, param_2: SEARCH-SIZE-Y=2, param_3: SCAN-STEP-X=0.602, param_4: SCAN-STEP-Y=0.602 req_1: ONBOARD ACQ FOR 508.4; ! linenum: 508.400 targname: NGC6833 config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: 15S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SCAN-STEP-X=0.172, param_3: SEARCH-SIZE-Y=5, param_4: SCAN-STEP-Y=0.172 req_1: ONBOARD ACQ FOR 508.5; ! comment_1: BLUE SIDE-SW ACQUISITION SEQUENCE. ! linenum: 508.500 targname: NGC6833 config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: 25.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SCAN-STEP-X=0.05, param_3: SEARCH-SIZE-Y=5, param_4: SCAN-STEP-Y=0.05 req_1: ONBOARD ACQ FOR 509-509.5; ! comment_1: BLUE SIDE-SW ACQUISITION SEQUENCE. ! linenum: 509.000 sequence_1: USE sequence_2: TAR-B-1 targname: NGC6833 ! linenum: 509.100 sequence_1: USE sequence_2: TAR-B-1A targname: NGC6833 aperture: 1.0 time_per_exp: X0.5 ! linenum: 509.200 sequence_1: USE sequence_2: TAR-B-1A targname: NGC6833 aperture: 4.3 time_per_exp: X0.5 ! linenum: 509.500 targname: NGC6833 config: FOS/BL opmode: ACQ aperture: 4.3 sp_element: MIRROR time_per_exp: 96.S fluxnum_1: 1 priority: 1 comment_1: ACQ IMAGE OF TARGET ! linenum: 510.000 targname: HD207757 config: FOS/BL opmode: ACQ/PEAK aperture: 4.3 sp_element: G400H num_exp: 1 time_per_exp: 8.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=1, param_2: SEARCH-SIZE-Y=3, param_3: SCAN-STEP-Y=1.204 req_1: ONBOARD ACQ FOR 510.1; ! linenum: 510.100 targname: HD207757 config: FOS/BL opmode: ACQ/PEAK aperture: 1.0 sp_element: G400H num_exp: 1 time_per_exp: 8.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=6, param_2: SEARCH-SIZE-Y=2, param_3: SCAN-STEP-X=0.602, param_4: SCAN-STEP-Y=0.602 req_1: ONBOARD ACQ FOR 510.2; req_2: SEQ 510-510.5 NO GAP; ! linenum: 510.200 targname: HD207757 config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: 15.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SCAN-STEP-X=0.172, param_3: SEARCH-SIZE-Y=5, param_4: SCAN-STEP-Y=0.172 req_1: ONBOARD ACQ FOR 510.5; ! linenum: 510.500 targname: HD207757 config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: 20.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SCAN-STEP-X=0.05, param_3: SEARCH-SIZE-Y=5, param_4: SCAN-STEP-Y=0.05 req_1: ONBOARD ACQ FOR 514-514.2 comment_1: TARGET ACQUISITION SEQUENCE. ! linenum: 514.000 sequence_1: USE sequence_2: TAR-B-2 targname: HD207757 ! linenum: 514.100 sequence_1: USE sequence_2: TAR-B-2A targname: HD207757 aperture: 1.0 time_per_exp: X0.5 ! linenum: 514.200 sequence_1: USE sequence_2: TAR-B-2A targname: HD207757 aperture: 4.3 time_per_exp: X0.5 ! linenum: 515.000 targname: HD207757 config: FOS/RD opmode: ACQ/PEAK aperture: 4.3 sp_element: G400H num_exp: 1 time_per_exp: 5.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=1, param_2: SEARCH-SIZE-Y=3, param_3: SCAN-STEP-Y=1.204 req_1: SEQ 515-515.3 NO GAP; req_2: ONBOARD ACQ FOR 515.1; ! linenum: 515.100 targname: HD207757 config: FOS/RD opmode: ACQ/PEAK aperture: 1.0 sp_element: G400H num_exp: 1 time_per_exp: 5.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=6, param_2: SEARCH-SIZE-Y=2, param_3: SCAN-STEP-X=0.602, param_4: SCAN-STEP-Y=0.602 req_1: ONBOARD ACQ FOR 515.2; ! linenum: 515.200 targname: HD207757 config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: 9.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SCAN-STEP-X=0.172, param_3: SEARCH-SIZE-Y=5, param_4: SCAN-STEP-Y=0.172 req_1: ONBOARD ACQ FOR 515.3; ! comment_1: RED SIDE-SW ACQUISITION SEQUENCE; ! linenum: 515.300 targname: HD207757 config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: 10.S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SCAN-STEP-X=0.05, param_3: SEARCH-SIZE-Y=5, param_4: SCAN-STEP-Y=0.05 req_1: ONBOARD ACQ FOR 519-521; ! comment_1: RED SIDE-SW ACQUISITION SEQUENCE; ! linenum: 519.000 sequence_1: USE sequence_2: TAR-R-2 targname: HD207757 ! linenum: 520.000 targname: HD207757 config: FOS/RD opmode: RAPID aperture: 1.0 sp_element: G190H num_exp: 1 time_per_exp: 600S fluxnum_1: 1 priority: 1 param_1: READ-TIME=30 ! linenum: 521.000 targname: HD207757 config: FOS/RD opmode: RAPID aperture: 4.3 sp_element: G190H num_exp: 1 time_per_exp: 600S fluxnum_1: 1 priority: 1 param_1: READ-TIME=30 ! ! end of exposure logsheet ! No scan data records found