!   $Id: 5519,v 7.1 1994/12/21 19:28:45 pepsa Exp $

coverpage:

  title_1:         FOC F/96 DETECTOR FOCUSSING-CYCLE 4
    proposal_for:  CAL/FOC
    cont_id:       2804
    pi_fname:      F.
    pi_lname:      PARESCE
    pi_inst:       ESA/FOC
    pi_country:    USA
    hours_pri:     1.00
    num_pri:       1
    foc:           X
! end of coverpage

abstract:

    line_1:        The purpose of this proposal is to verify the F/96
    line_2:        intensifier first stage focus. A standard HST calibration
    line_3:        target field (NGC5139) will be imaged at six different
    line_4:        focus settings. The best focus will be determined by
    line_5:        assessment of FWHM of star in each image.This proposal is
    line_6:        intended to be run every 12 months starting on 12/94 to
    line_7:        monitor the detector focus.

!
! end of abstract

general_form_proposers:

  lname:           PARESCE
    fname:         F.
    inst:          ESA/FOC
    country:       USA
    esa:           X

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        A standard HST calibration target field (NGC5139) will be
    line_2:        imaged at seven different focus settings.The best focus will
    line_3:        be determined by assessment of the FWHM of stars in each
    line_4:        image.This proposal is intended to run every 12 months
    line_5:        starting 12/94 to monitor the detector focus.

!
!end of general form text

general_form_address:

  lname:           PARESCE
    fname:         F.
    category:      PI
    inst:          STSCI/ESA
    addr_1:        3700 SAN MARTIN DR
    city:          BALTIMORE
    country:       USA

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        NGC5139
    descr_1:       J,702
    pos_1:         RA=13H 26M 45.9S +/- 0.01S,
    pos_2:         DEC=-47D 28' 36.7" +/- 0.1"
    equinox:       2000

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    targname:      NGC5139
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X512
    sp_element:    F346M
    num_exp:       2
    time_per_exp:  600S
    priority:      1
    req_1:         SEQ 1-6 NO GAP;
    req_2:         CYCLE 4/ 1-6;
    comment_1:     INTENSIFIER HV VOLTAGES AT OPTIMUM SET
    comment_2:     BY TRANSITION COMMANDING TO HV OPERATE

!

    linenum:       2.000
    targname:      NGC5139
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X512
    sp_element:    F346M
    num_exp:       2
    time_per_exp:  600S
    priority:      1
    comment_1:     SET INTENSIFIER VOLTAGES VIA
    comment_2:     `PXPDAELB' 12KV TO 111, 36KV TO 146.

!

    linenum:       3.000
    targname:      NGC5139
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X512
    sp_element:    F346M
    num_exp:       2
    time_per_exp:  600S
    priority:      1
    comment_1:     SET INTENSIFIER VOLTAGES VIA
    comment_2:     `PXPDAELB' 12KV TO 133, 36KV TO 153.

!

    linenum:       4.000
    targname:      NGC5139
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X512
    sp_element:    F346M
    num_exp:       2
    time_per_exp:  600S
    priority:      1
    comment_1:     SET INTENSIFIER VOLTAGES VIA
    comment_2:     `PXPDEALB' 12KV TO 66, 36KV TO 130.

!

    linenum:       5.000
    targname:      NGC5139
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X512
    sp_element:    F346M
    num_exp:       2
    time_per_exp:  600S
    priority:      1
    comment_1:     SET INTENSIFIER VOLTAGES VIA
    comment_2:     `PXPDEALB' 12KV TO 45, 36KV TO 123.

!

    linenum:       6.000
    targname:      NGC5139
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X512
    sp_element:    F346M
    num_exp:       2
    time_per_exp:  600S
    priority:      1
    comment_1:     SET INTENSIFIER VOLTAGES VIA
    comment_2:     `PXPDEALB' 12KV TO 22, 36KV TO 115

!
! end of exposure logsheet

! No scan data records found