! $Id: 5277,v 4.1 1994/07/27 16:17:20 pepsa Exp $ coverpage: title_1: GHRS SIDE 1 SPECTRAL LAMP TESTS--CYCLE 4 sci_cat: CALIBRATION proposal_for: CAL/HRS pi_fname: DENNIS pi_mi: C. pi_lname: EBBETS pi_inst: BALL AEROSPACE AND COMMUNICATIONS GROUP pi_country: USA pi_phone: (303) 939-5964 keywords_1: HRS, CALIBRATION, SCIENCE VERIFICATION hours_pri: 1.86 num_pri: 1 hrs: Y ! end of coverpage abstract: line_1: This proposal defines measurements of the internal spectral line_2: calibration lamp SC2 for the GHRS side 1 spectroscopic modes line_3: G140L, G140M and Ech-A. These will be carried out during the line_4: cycle 4 calibration program. The observations provide data line_5: for calibrating dispersion constants, carrousel and Y line_6: deflection functions and spectral resolving power. ! ! end of abstract general_form_proposers: lname: EBBETS fname: DENNIS inst: BACG country: USA ! lname: HULBERT fname: STEVE inst: STSCI country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: The proposal has three distinct parts, which are independent line_2: of each other, and may be scheduled and executed separately. line_3: Lines 100-130 grating G140L at four wavelengths: line_4: 1200 1400 1600 1800 line_5: Lines 200-250 grating G140M at six wavelengths: line_6: 1165 1215 1254 1330 1405 1525 line_7: Lines 300-372 Echelle A at four carrousel positions, with line_8: the same seven orders observed at each line_9: line 380 is one additional short wavelength line_10: for Echelle A line_11: All exposures use substep patterns with 4 samples per diode line_12: width, and two bins to measure background. All exposures line_13: should include an explicit SPYBAL calibration to optimize the line_14: centering of the spectrum on the diode array. ! question: 5 section: 1 line_1: The execution of this proposal should be scheduled for several line_2: weeks after the side 1 carrousel commanding verification line_3: test. The cross-strapped commanding of side 1 carrousel line_4: functions has not been verified yet. Execute after successful line_5: completion of 5276 and before 5278. line_6: Program can be executed PRIOR to the COSTAR/GHRS deplyoment. ! question: 7 section: 1 line_1: The data analysis will be similar to that performed with the line_2: data from OV, SV and calibration monitoring spectral lamp tests. line_3: We will verify and update the following functions: line_4: dispersion constants for wavelength calibration line_5: coefficients for carrousel commanding function line_6: coefficients for Y deflection commanding function line_7: resolving power vs wavelength, sample, line position ! question: 10 section: 1 line_1: Data analysis line_2: Personnel line_3: Travel and Publications Support ! !end of general form text general_form_address: lname: Ebbets fname: Dennis category: PI inst: Ball Aerospace addr_1: PO Box 1062 AR1 city: Boulder state: CO zip: 80306 country: USA phone: 303 939 5964 ! lname: Hulbert fname: Steve category: CON inst: Space Telescope Science Inst. addr_1: 3700 San Martin Drive city: Baltimore state: MD zip: 21218 country: USA phone: 410 338 4911 ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 100.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: G140L wavelength: 1200.0 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=5, param_2: COMB=TWO, req_1: SEQ 100-130 NO GAP; req_2: CYCLE 4 / 100-130; comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 110.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: G140L wavelength: 1400.0 num_exp: 1 time_per_exp: 27.2S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=5, param_2: COMB=TWO, comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 120.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: G140L wavelength: 1600.0 num_exp: 1 time_per_exp: 27.2S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=5, param_2: COMB=TWO, comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 130.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: G140L wavelength: 1800.0 num_exp: 1 time_per_exp: 54.4S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=5, param_2: COMB=TWO, comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 200.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: G140M wavelength: 1165.0 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=5, param_2: COMB=TWO, req_1: SEQ 200-250 NO GAP; req_2: CYCLE 4 / 200-250; comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 210.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: G140M wavelength: 1215.0 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=5, param_2: COMB=TWO, comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 220.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: G140M wavelength: 1254.0 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=5, param_2: COMB=TWO, comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 230.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: G140M wavelength: 1330.0 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=5, param_2: COMB=TWO, comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 240.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: G140M wavelength: 1405.0 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=5, param_2: COMB=TWO, comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 250.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: G140M wavelength: 1525.0 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=5, param_2: COMB=TWO, comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 300.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A34 wavelength: 1637.95 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 req_1: SEQ 300-312 NO GAP; req_2: CYCLE 4 / 300-380; comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 302.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A37 wavelength: 1505.14 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 304.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A40 wavelength: 1392.26 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 306.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A43 wavelength: 1295.12 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 308.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A46 wavelength: 1210.66 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 310.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A47 wavelength: 1184.90 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 312.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A48 wavelength: 1160.21 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 320.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A34 wavelength: 1651.26 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=2.0 req_1: SEQ 320-332 NO GAP; comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 322.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A37 wavelength: 1517.37 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 324.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A40 wavelength: 1403.57 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 326.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A43 wavelength: 1305.65 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 328.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A46 wavelength: 1220.50 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 330.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A47 wavelength: 1194.53 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 332.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A48 wavelength: 1169.64 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 340.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A34 wavelength: 1664.46 num_exp: 1 time_per_exp: 136.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=2.0 req_1: SEQ 340-352 NO GAP; comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 342.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A37 wavelength: 1529.51 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 344.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A40 wavelength: 1414.80 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 346.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A43 wavelength: 1316.09 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 348.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A46 wavelength: 1230.26 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 350.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A47 wavelength: 1204.08 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 352.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A48 wavelength: 1179.00 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 360.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A34 wavelength: 1677.84 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 req_1: SEQ 360-372 NO GAP; comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 362.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A37 wavelength: 1541.80 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 364.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A40 wavelength: 1426.17 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 366.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A43 wavelength: 1326.67 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 368.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A46 wavelength: 1240.14 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 370.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A47 wavelength: 1213.76 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 372.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A48 wavelength: 1188.47 num_exp: 1 time_per_exp: 68.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=1.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! linenum: 380.000 targname: WAVE config: HRS opmode: ACCUM aperture: SC2 sp_element: ECH-A49 wavelength: 1151.00 num_exp: 1 time_per_exp: 272.0S s_to_n: 50 fluxnum_1: 1 priority: 1 param_1: STEP-PATT=7, param_2: COMB=TWO, param_3: STEP-TIME=2.0 comment_1: COMPUTE AND APPLY NEW SPYBAL ! ! end of exposure logsheet ! No scan data records found