!  File:  5269C.PROP
!  Database:  PEPDB
!  Date:  24-FEB-1994:03:47:38

coverpage:

  title_1:         PARTIAL REPEAT OF WF/PC CYCLE 2 INTERCHIP PHOTOMETRIC
    title_2:       CALIBRATION-HOPR #167
    proposal_for:  RPT/WFC
    cont_id:       4785
    pi_title:      DR.
    pi_fname:      JOHN
    pi_mi:         W.
    pi_lname:      MACKENTY
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      (410) 338-4559
    keywords_1:    CALIBRATION
    wf_pc:         X
! end of coverpage

abstract:

    line_1:        This program calibrates the DQE of the WF chips.
    line_2:        It is a repeat of the WF portion of Proposal 4785,
    line_3:        which initially failed due to a proposal
    line_4:        implementation error.
    line_5:        There are exposures of popular filters on BD+75D325
    line_6:        to relate wfpc magnitude system to synthetic
    line_7:        photometry approach, as used by RSDP.

!
! end of abstract

general_form_proposers:

  lname:           MACKENTY
    fname:         JOHN
    mi:            W.
    inst:          STSCI
    country:       USA

!

  lname:           SPARKS
    fname:         WILLIAM
    mi:            B.
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        UV standard to relate systems.

!

  question:        5
    section:       1
    line_1:        It should be carried out regardless of the state of
    line_2:        the UV flood.

!

  question:        6
    section:       1
    line_1:        Flux standards are needed to monitor throughput.

!

  question:        7
    section:       1
    line_1:        These data will be archived at ScI and the numbers included
    line_2:        in WF/PC Instrument Science Reports, used to update
    line_3:        the CDB and the RSDP photometry tables.

!
!end of general form text

general_form_address:

  lname:           SPARKS
    fname:         WILLIAM
    mi:            B.
    title:         DR.
    category:      CI
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA
    phone:         (410) 338-4843

!

  lname:           MACKENTY
    fname:         JOHN
    mi:            W.
    title:         DR.
    category:      PI
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA
    phone:         (410) 338-4559

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        BD+75D325
    descr_1:       FLUX STANDARD
    pos_1:         RA = 08H 10M 49.31S +/- 1S,
    pos_2:         DEC = +74D 57' 57.5" +/- 1"
    equinox:       2000.
    fluxnum_1:     1
    fluxval_1:     V=9.54

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       0.500
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF2
    sp_element:    F336W
    num_exp:       1
    time_per_exp:  1.2S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=YES
    req_1:         CYCLE 2/0.5-1.73;
    req_2:         PCS MODE C;
    req_3:         SEQ 0.5-1.43 NO GAP;
    req_4:         GROUP
    req_5:         0.5-1.73 WITHIN 3D;
    comment_1:     SINGLE CCD READOUT FOR THIS EXPOSURE.
    comment_2:     THIS EXPOSURE IS TO ESTABLISH
    comment_3:     POINTING FOR GYRO EXPOSURES TO
    comment_4:     FOLLOW.

!

    linenum:       1.000
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF1
    sp_element:    F336W
    num_exp:       1
    time_per_exp:  1.2S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=YES,
    param_3:       READ=NO
    req_1:         PCS MODE G;
    req_2:         SEQ 1-1.03 NON-INT;
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.010
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF2
    sp_element:    F336W
    num_exp:       1
    time_per_exp:  1.2S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.020
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF3
    sp_element:    F336W
    num_exp:       1
    time_per_exp:  1.2S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.030
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF4
    sp_element:    F336W
    num_exp:       1
    time_per_exp:  1.2S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=YES
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.200
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF1
    sp_element:    F284W
    num_exp:       1
    time_per_exp:  1.4S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=YES,
    param_3:       READ=NO
    req_1:         PCS MODE G;
    req_2:         SEQ 1.2-1.23 NON-INT
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.210
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF2
    sp_element:    F284W
    num_exp:       1
    time_per_exp:  1.4S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.220
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF3
    sp_element:    F284W
    num_exp:       1
    time_per_exp:  1.4S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.230
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF4
    sp_element:    F284W
    num_exp:       1
    time_per_exp:  1.4S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=YES
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.300
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF1
    sp_element:    F439W
    num_exp:       1
    time_per_exp:  0.6S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=YES,
    param_3:       READ=NO
    req_1:         PCS MODE G;
    req_2:         SEQ 1.3-1.33 NON-INT
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.310
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF2
    sp_element:    F439W
    num_exp:       1
    time_per_exp:  0.6S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.320
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF3
    sp_element:    F439W
    num_exp:       1
    time_per_exp:  0.6S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.330
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF4
    sp_element:    F439W
    num_exp:       1
    time_per_exp:  0.6S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=YES
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.400
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF1
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  0.18S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=YES,
    param_3:       READ=NO
    req_1:         PCS MODE G;
    req_2:         SEQ 1.4-1.43 NON-INT
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.410
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF2
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  0.18S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.420
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF3
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  0.18S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.430
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF4
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  0.18S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=YES
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.450
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF1
    sp_element:    F336W
    num_exp:       1
    time_per_exp:  1.2S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=YES
    req_1:         PCS MODE C;
    req_2:         SEQ 1.45-1.73 NO GAP;
    comment_1:     SINGLE CCD READOUT FOR THIS EXPOSURE.
    comment_2:     THIS EXPOSURE IS TO ESTABLISH
    comment_3:     POINTING FOR GYRO EXPOSURES TO
    comment_4:     FOLLOW.

!

    linenum:       1.500
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF1
    sp_element:    F702W
    num_exp:       1
    time_per_exp:  0.23S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=YES,
    param_3:       READ=NO
    req_1:         PCS MODE G;
    req_2:         SEQ 1.5-1.53 NON-INT
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.510
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF2
    sp_element:    F702W
    num_exp:       1
    time_per_exp:  0.23S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.520
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF3
    sp_element:    F702W
    num_exp:       1
    time_per_exp:  0.23S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.530
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF4
    sp_element:    F702W
    num_exp:       1
    time_per_exp:  0.23S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=YES
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.600
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF1
    sp_element:    F785LP
    num_exp:       1
    time_per_exp:  0.7S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=YES,
    param_3:       READ=NO
    req_1:         PCS MODE G;
    req_2:         SEQ 1.6-1.63 NON-INT
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.610
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF2
    sp_element:    F785LP
    num_exp:       1
    time_per_exp:  0.7S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.620
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF3
    sp_element:    F785LP
    num_exp:       1
    time_per_exp:  0.7S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.630
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF4
    sp_element:    F785LP
    num_exp:       1
    time_per_exp:  0.7S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=YES
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.700
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF1
    sp_element:    F1042M
    num_exp:       1
    time_per_exp:  16S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=YES,
    param_3:       READ=NO
    req_1:         PCS MODE G;
    req_2:         SEQ 1.7-1.73 NON-INT
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.710
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF2
    sp_element:    F1042M
    num_exp:       1
    time_per_exp:  16S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.720
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF3
    sp_element:    F1042M
    num_exp:       1
    time_per_exp:  16S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=NO
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!

    linenum:       1.730
    targname:      BD+75D325
    config:        WFC
    opmode:        IMAGE
    aperture:      WF4
    sp_element:    F1042M
    num_exp:       1
    time_per_exp:  16S
    priority:      1
    param_1:       CR-SPLIT=NO,
    param_2:       PRE-FLASH=NO,
    param_3:       READ=YES
    req_1:         PCS MODE G
    comment_1:     READOUT NEEDED AFTER LAST EXPOSURE.

!
! end of exposure logsheet

! No scan data records found