!   $Id: 5243,v 4.1 1994/07/27 16:07:27 pepsa Exp $

coverpage:

  title_1:         FOS LOCATION OF SPECTRA AND APERTURE: SMOV TESTS
    proposal_for:  SMC/FOS
    pi_fname:      ANURADHA
    pi_lname:      KORATKAR
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      410-338-4470
    fos:           X
! end of coverpage

abstract:

    line_1:        We propose to obtain y-base maps to determine the locations
    line_2:        of spectra and the course aperture location for the 0.3"
    line_3:        aperture and 4 grating settings once before the deployment of
    line_4:        the FOS mirror and all gratings once after deployment of the
    line_5:        mirror. This test has the highest priority because our
    line_6:        ability to acquire spectra depends on our
    line_7:        knowledge of Y_Base values. It should also be conducted as
    line_8:        the first calibration test for the FOS because a knowledge of
    line_9:        the location of spectra is primary to FOS observations.
    line_10:       We also propose to verify the FOS focus, X-pitch and Y-pitch
    line_11:       in this proposal,  because the focus is sensitive to external
    line_12:       magnetic fields which are different pre and post COSTAR.

!
! end of abstract

general_form_proposers:

  lname:           KORATKAR
    fname:         ANURADHA
    inst:          STSCI
    country:       USA

!

  lname:           KEYES
    fname:         CHARLES (TONY)
    inst:          STSCI
    country:       USA

!

  lname:           KINNEY
    fname:         ANNE
    inst:          STSCI
    country:       USA

!

  lname:           BOHLIN
    fname:         RALPH
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           TAYLOR
    fname:         CYNTHIA
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           WHEELER
    fname:         THOMAS
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        In the Y-BASE test, we will obtain data on the internal Pt-Ne
    line_2:        lamps and TALEDs. Data will be obtained through the 0.3"
    line_3:        aperture. The observations will map the face of the
    line_4:        photocathode using 24 y-steps and 1 x-step. The program is to
    line_5:        be performed in two sections, once before the
    line_6:        deployment of the FOS mirror and once after.
    line_7:        In the FOCUS part of the test, after warm-up to the nominal high
    line_8:        voltage, the trim current is set to zero, and the HV is set to a
    line_9:        lower value. Spectra will then be obtained with the 0.1-PAIR
    line_10:       aperture, G190H, and the Pt-Ne lamp. The high-voltage is then
    line_11:       varied in 200 volt increments +/- 600 volts from the nominal
    line_12:       setting with spectra taken at each setting. This will allow
    line_13:       for optimal focus determination.  If a change to the optimum HV
    line_14:       setting is determined from the procedure described above, and
    line_15:       updated to the PDB, a series of exposures will be required to
    line_16:       calculate the new X-Pitch and Y-Pitch values for the optimal
    line_17:       HV setting. This will be acheived by obtaining a series of
    line_18:       spectra at three different X-Bases. Additionally, measurements
    line_19:       with the TALEDs through the 0.1-Pair aperture will be used to
    line_20:       determine Y-Pitch. This program may result in an instruction flow
    line_21:       change to the detector high voltage setting, the x-pitch value,
    line_22:       the y-pitch value.
    line_23:       The FOCUS observations MUST occur during non-SAA impacted orbits.

!

  question:        5
    section:       1
    line_1:        All Y-BASE observations should be performed in NON-PRIME time.
    line_2:        Each sequence should be performed within a 12 hour timeframe.
    line_3:        Note that the high voltage MUST NOT be turned off (except
    line_4:        possibly for SAA passages) once a sequence has begun. The
    line_5:        pre-costar lines (302-303) MUST BE EXCEUTED BEFORE any other
    line_6:        FOS external observations.  (After proposals 4802 and 4803.)
    line_7:        Similarly, the post costar lines (304-305) MUST BE EXECUTED
    line_8:        BEFORE any other external FOS observation. (After proposal 4815.)
    line_9:        The X-Pitch and Y-Pitch measurement observations have been flagged
    line_10:       as AFTER <line> BY 7D.  We will determine the need to
    line_11:       execute these lines after the first set of observations have been
    line_12:       obtained.
    line_14:       LINES 1-4 DOES THE RED SIDE IN 48 HOURS.

!

  question:        5
    section:       2
    line_1:
    line_2:        OBSET WHAT?             LINES              DESCRIPTION
    line_3:        ----- -----             -----              -----------
    line_4:        01   pre-costar ybase   use 302 and 303  done within 48hours.
    line_5:        02   pre-costar ybase   use 302 and 303  done within 48hours.
    line_6:        03   post-costar        use 47-65.4      done within 48hours.
    line_7:        red focus
    line_8:        04   post-costar        use 66-84.4      done within 48hours.
    line_9:        blue focus
    line_10:       05   xpitch ypitch red  use 85           7days after Red Focus.
    line_11:       06   xpitch ypitch blue use 86           7days after blue Focus.
    line_12:       07   Red ybase          use 305 (red)    7days after Red pitch.
    line_13:       08   Blue ybase         use 304 (blue)   7days after Blue pitch.

!

  question:        6
    section:       1
    line_1:        This test is not stray light sensitive. All observations are
    line_2:        internal Pt-Ne lamp measurements AND TALED.

!

  question:        7
    section:       1
    line_1:        Data reduction and analysis will be performed at the STScI.
    line_2:        This is a verification of earlier analysis, so no data will
    line_3:        need to be added to the PODPS pipeline. However, this program
    line_4:        will determine the correct y-deflections to be used in
    line_5:        obtaining data, and this information will need to be updated
    line_6:        after any change in position is measured.
    line_7:        This program will also determine the correct detector high
    line_8:        voltage, x-pitch, and y-pitch values to be used
    line_9:        in obtaining data, and this information will need to be
    line_10:       updated after any change is measured.

!
!end of general form text

general_form_address:

  lname:           KORATKAR
    fname:         ANURADHA
    category:      PI
    inst:          ST SCI
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA

!
! end of general_form_address records

! No fixed target records found

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEFINE
    sequence_2:    WAIT
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  60S
    priority:      1
    comment_1:     A 1 MINUTE WAIT FOR STABILITY.

!

    linenum:       2.000
    sequence_1:    DEFINE
    sequence_2:    HVSET
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  100S
    priority:      1
    comment_1:     SET THE HV DAC.

!

    linenum:       3.000
    sequence_1:    DEFINE
    sequence_2:    TRIM
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    comment_1:     SET THE TRIM CURRENT.

!

    linenum:       4.000
    sequence_1:    DEFINE
    sequence_2:    SPECTRAR
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  480S
    priority:      1
    param_1:       SUB-STEP=8,
    param_2:       Y-SIZE=1,
    param_3:       X=0,
    param_4:       COMB=YES,
    comment_1:     NORMAL X-BASE.

!

    linenum:       5.000
    sequence_1:    DEFINE
    sequence_2:    SPECTRAB
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  480S
    priority:      1
    param_1:       SUB-STEP=8,
    param_2:       Y-SIZE=1,
    param_3:       X=0,
    param_4:       COMB=YES
    comment_1:     NORMAL X-BASE.

!

    linenum:       6.000
    sequence_1:    DEFINE
    sequence_2:    PITCHR
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  480S
    priority:      1
    param_1:       SUB-STEP=8,
    param_2:       Y-SIZE=1,
    param_3:       X=0,
    param_4:       COMB=YES
    comment_1:     NORMAL X-BASE.

!

    linenum:       6.100
    sequence_1:    DEFINE
    sequence_2:    PITCHR
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  48S
    priority:      1
    param_1:       SUB-STEP=8,
    param_2:       Y-SIZE=1,
    param_3:       X=-512,
    param_4:       COMB=YES
    comment_1:     OFF-NORMAL X-BASE 1. THE IMAGE
    comment_2:     SHOULD SHIFT BY +/-16 DIODES
    comment_3:     (128 PIXELS).

!

    linenum:       6.200
    sequence_1:    DEFINE
    sequence_2:    PITCHR
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  48S
    priority:      1
    param_1:       SUB-STEP=8,
    param_2:       Y-SIZE=1,
    param_3:       X=+512,
    param_4:       COMB=YES
    comment_1:     OFF-NORMAL X-BASE 2. THE IMAGE
    comment_2:     SHOULD SHIFT BY +/-16 DIODES
    comment_3:     (128 PIXELS).

!

    linenum:       6.300
    sequence_1:    DEFINE
    sequence_2:    PITCHR
    targname:      TALED
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1700S
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=85,
    param_3:       Y-SPACE=10.54,
    param_4:       COMB=YES,
    param_5:       Y-OFFSET=+253,
    comment_1:     Y-PITCH MEASUREMENT. IMAGE
    comment_2:     CENTER AT MIDPOINT BETWEEN
    comment_3:     -A AND -B APERTURES.

!

    linenum:       6.500
    sequence_1:    DEFINE
    sequence_2:    PITCHB
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  480S
    priority:      1
    param_1:       SUB-STEP=8,
    param_2:       Y-SIZE=1,
    param_3:       X=0,
    param_4:       COMB=YES
    comment_1:     NORMAL X-BASE.

!

    linenum:       6.600
    sequence_1:    DEFINE
    sequence_2:    PITCHB
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  48S
    priority:      1
    param_1:       SUB-STEP=8,
    param_2:       Y-SIZE=1,
    param_3:       X=-512,
    param_4:       COMB=YES
    comment_1:     OFF-NORMAL X-BASE 1. THE IMAGE
    comment_2:     SHOULD SHIFT BY +/-16 DIODES
    comment_3:     (128 PIXELS).

!

    linenum:       6.700
    sequence_1:    DEFINE
    sequence_2:    PITCHB
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  48S
    priority:      1
    param_1:       SUB-STEP=8,
    param_2:       Y-SIZE=1,
    param_3:       X=+512,
    param_4:       COMB=YES
    comment_1:     OFF-NORMAL X-BASE 2. THE IMAGE
    comment_2:     SHOULD SHIFT BY +/-16 DIODES
    comment_3:     (128 PIXELS).

!

    linenum:       6.800
    sequence_1:    DEFINE
    sequence_2:    PITCHB
    targname:      TALED
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1700S
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=85,
    param_3:       Y-SPACE=10.54,
    param_4:       COMB=YES,
    param_5:       Y-OFFSET=+253,
    comment_1:     Y-PITCH MEASUREMENT. IMAGE
    comment_2:     CENTER AT MIDPOINT BETWEEN
    comment_3:     -A AND -B APERTURES.

!

    linenum:       47.000
    sequence_1:    USE HVSET
    req_1:         SEQ 47-65.4 NO GAP;
    req_2:         CYCLE 4 / 47-86;
    comment_1:     SET HV DAC TO 21.6KV.
    comment_2:     THESE LINES MUST BE EXECUTED
    comment_3:     ATLEAST 7D BEFORE LINES 85

!

    linenum:       48.000
    sequence_1:    USE WAIT

!

    linenum:       49.000
    sequence_1:    USE TRIM
    comment_1:     SET TRIM CURRENT TO 129 (0 MA).

!

    linenum:       50.000
    sequence_1:    USE
    sequence_2:    SPECTRAR

!

    linenum:       51.000
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 21.8KV.

!

    linenum:       52.000
    sequence_1:    USE WAIT

!

    linenum:       53.000
    sequence_1:    USE
    sequence_2:    SPECTRAR

!

    linenum:       54.000
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 22.0KV.

!

    linenum:       55.000
    sequence_1:    USE WAIT

!

    linenum:       56.000
    sequence_1:    USE
    sequence_2:    SPECTRAR

!

    linenum:       57.000
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 22.2KV.

!

    linenum:       58.000
    sequence_1:    USE WAIT

!

    linenum:       59.000
    sequence_1:    USE
    sequence_2:    SPECTRAR

!

    linenum:       60.000
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 22.4KV.

!

    linenum:       61.000
    sequence_1:    USE WAIT

!

    linenum:       62.000
    sequence_1:    USE
    sequence_2:    SPECTRAR

!

    linenum:       63.000
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 22.6KV.

!

    linenum:       64.000
    sequence_1:    USE WAIT

!

    linenum:       65.000
    sequence_1:    USE
    sequence_2:    SPECTRAR

!

    linenum:       65.100
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 22.8KV.

!

    linenum:       65.200
    sequence_1:    USE WAIT

!

    linenum:       65.300
    sequence_1:    USE
    sequence_2:    SPECTRAR

!

    linenum:       65.400
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     RETURN FOS TO HOLD.

!

    linenum:       66.000
    sequence_1:    USE HVSET
    req_1:         SEQ 66-84.4 NO GAP;
    comment_1:     SET HV DAC TO 22.66KV.
    comment_2:     THESE LINES MUST BE EXECUTED
    comment_3:     ATLEAST 7D BEFORE LINES 86

!

    linenum:       67.000
    sequence_1:    USE WAIT

!

    linenum:       68.000
    sequence_1:    USE TRIM
    comment_1:     SET TRIM CURRENT TO 130 (0 MA).

!

    linenum:       69.000
    sequence_1:    USE
    sequence_2:    SPECTRAB

!

    linenum:       70.000
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 22.86KV.

!

    linenum:       71.000
    sequence_1:    USE WAIT

!

    linenum:       72.000
    sequence_1:    USE
    sequence_2:    SPECTRAB

!

    linenum:       73.000
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 23.06KV.

!

    linenum:       74.000
    sequence_1:    USE WAIT

!

    linenum:       75.000
    sequence_1:    USE
    sequence_2:    SPECTRAB

!

    linenum:       76.000
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 23.26KV.

!

    linenum:       77.000
    sequence_1:    USE WAIT

!

    linenum:       78.000
    sequence_1:    USE
    sequence_2:    SPECTRAB

!

    linenum:       79.000
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 23.46KV.

!

    linenum:       80.000
    sequence_1:    USE WAIT

!

    linenum:       81.000
    sequence_1:    USE
    sequence_2:    SPECTRAB

!

    linenum:       82.000
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 23.66KV.

!

    linenum:       83.000
    sequence_1:    USE WAIT

!

    linenum:       84.000
    sequence_1:    USE
    sequence_2:    SPECTRAB

!

    linenum:       84.100
    sequence_1:    USE HVSET
    comment_1:     SET HV DAC TO 23.86KV.

!

    linenum:       84.200
    sequence_1:    USE WAIT

!

    linenum:       84.300
    sequence_1:    USE
    sequence_2:    SPECTRAB

!

    linenum:       84.400
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     RETURN FOS TO HOLD.

!

    linenum:       85.000
    sequence_1:    USE
    sequence_2:    PITCHR
    comment_1:     TO BE RUN AFTER NEW HV UPDATE
    comment_2:     HAS BEEN COMPLETED
    comment_3:     AFTER 65.4 BY 7D;

!

    linenum:       86.000
    sequence_1:    USE
    sequence_2:    PITCHB
    comment_1:     TO BE RUN AFTER NEW HV UPDATE
    comment_2:     HAS BEEN COMPLETED
    comment_3:     AFTER 84.4 BY 7D;

!

    linenum:       100.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPBA-S
    targname:      TALED
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  66S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24
    req_1:         SEQ 100-103 NO GAP;

!

    linenum:       101.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPBA-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  90S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       102.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPBA-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  6S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       102.500
    sequence_1:    DEFINE
    sequence_2:    Y-MAPBA-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  36S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       103.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPBA-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  18S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       110.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPRA-S
    targname:      TALED
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  66S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24
    req_1:         SEQ 110-113 NO GAP;

!

    linenum:       111.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPRA-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  6S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       112.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPRA-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  24S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       112.500
    sequence_1:    DEFINE
    sequence_2:    Y-MAPRA-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  54S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       113.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPRA-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  18S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       119.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPB-S
    targname:      TALED
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  66S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24
    req_1:         SEQ 119-127 NO GAP;

!

    linenum:       120.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPB-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  6S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       121.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPB-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  18S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       122.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPB-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  6S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       123.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPB-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  6S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       124.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPB-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  6S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       125.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPB-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  36S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       126.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPB-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  18S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       127.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPB-S
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  90S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       129.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPR-S
    targname:      TALED
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  66S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24
    req_1:         SEQ 129-137 NO GAP;

!

    linenum:       130.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPR-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  6S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       131.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPR-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  72S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       132.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPR-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  18S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       133.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPR-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  6S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       134.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPR-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  6S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       135.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPR-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  24S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       136.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPR-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  54S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       137.000
    sequence_1:    DEFINE
    sequence_2:    Y-MAPR-S
    targname:      WAVE
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      0.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  6S
    priority:      1
    param_1:       SUB-STEP=1,
    param_2:       Y-SIZE=24

!

    linenum:       302.000
    sequence_1:    USE
    sequence_2:    Y-MAPBA-S
    req_1:         CYCLE 3 / 302-303;
    comment_1:     EXECUTE PRE FOS
    comment_2:     COSTAR MIRROR DEPLOYMENT

!

    linenum:       303.000
    sequence_1:    USE
    sequence_2:    Y-MAPRA-S
    comment_1:     EXECUTE PRE FOS
    comment_2:     COSTAR MIRROR DEPLOYMENT

!

    linenum:       304.000
    sequence_1:    USE
    sequence_2:    Y-MAPB-S
    req_1:         CYCLE 4 / 304-305;
    req_2:         AFTER 86 BY 7D;
    comment_1:     EXECUTE POST FOS
    comment_2:     COSTAR MIRROR DEPLOYMENT
    comment_3:     AND 7 DAYS AFTER
    comment_4:     X-PITCH, Y-PITCH DETERMINATION

!

    linenum:       305.000
    sequence_1:    USE
    sequence_2:    Y-MAPR-S
    req_1:         AFTER 85 BY 7D;
    comment_1:     EXECUTE POST FOS
    comment_2:     COSTAR MIRROR DEPLOYMENT
    comment_3:     AND 7 DAYS AFTER
    comment_4:     X-PITCH, Y-PITCH DETERMINATION

!
! end of exposure logsheet

! No scan data records found