! $Id: 5240,v 4.1 1994/07/27 16:05:55 pepsa Exp $ coverpage: title_1: SMOV-WFPC2 FLAT FIELDS CALIBRATION proposal_for: SMC/WF2 pi_title: DR. pi_fname: JOHN pi_lname: TRAUGER pi_inst: JPL pi_country: USA pi_phone: 818-354-9594 wf_pc: Y off_fname: JOHN off_lname: TRAUGER off_title: DR. off_inst: JET PROPULSION LAB off_addr_1: CALTECH off_addr_2: MS 179-225 off_addr_3: 4800 OAK GROVE DR. off_city: PASADENA off_state: CA off_zip: 91109 off_country: USA off_phone: 818-354-9594 ! end of coverpage abstract: line_1: This activity satisfies requirements D2.5.1.3.3 line_2: (Sufficient internal and external flat fields shall be line_3: obtained in SMOV to demonstrate the ability to obtain 1% line_4: flat fields with the WF/PC-II for the major categories line_5: of filters (i.e., Narrow Band, Wide Band, UV, Linear line_6: Variable). ! ! end of abstract general_form_proposers: lname: TRAUGER fname: JOHN title: DR. inst: JPL country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 3 line_1: DESCRIPTION: Internal Cal Channel flat fields will be line_2: obtained for most of the WF/PC-II filters. External Flat line_3: Fields (Earth) will be obtained for about 1/2 dozen narrow line_4: band filters spaced as evenly as possible in wavelength. line_5: The ratio fo cal channel (internal) flats to Earth flats line_6: for these filters will be used to determine the cal channel line_7: illumination pattern for correcting the rest of the cal line_8: channel flats. ! question: 5 section: 3 line_1: SPECIAL SCHEDULING: Do sequence earth approximately line_2: once a day for 31 days line_3: Scheduling may be delayed for COSTAR operations. line_4: Scheduling on calendar after COSTAR proposals on line_5: the calender. line_6: DO THE VL AND UV SEQUENCE once a week somewhere in line_7: SMOV AFTER the Pre-req's have been completed. line_8: DEPENDENCIES: line_9: The dependencies for this proposal are the follow: line_10: PROP IMMEDIATELY PRECEDING is the Relative line_11: Photmetric Calibration Proposal (prop = 4749,act sum WFII-CAL-04) line_12: WFPC2 Tec Turn On (prop = 4721,act sum WFII-06). line_13: WFPC2 Fine Alignment (prop =4616,act sum WFII-ALI-05) line_14: WFPC2 AFM Adjustment (prop = 4441,act sum WFII-ALI-04). line_15: WFPC2 Coarse POM Adjustment (prop =4333,act sum WFII-ALI-02). line_16: TECs at final temperture setpoint. line_17: NOTE: 4749 is the preceding proposal, but inorder for this prop to run line_18: 4721, 4616, 4441, and 4333 needs to be completed. ! !end of general form text general_form_address: lname: Trauger fname: John title: Dr. category: PI inst: Jet Propulsion Lab addr_1: CALTECH addr_2: MD 179-225 addr_3: 4800 Oak Grove Dr. city: Pasadena state: CA zip: 91109 country: USA phone: 818-354-9594 ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 2.000 sequence_1: DEF EARTH targname: EARTH-CALIB config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F218W num_exp: 1 time_per_exp: 500S priority: 1 param_1: ATD-GAIN=15, req_1: CYCLE 4/2-222; comment_1: RUN AT ANY OPPORTUNITY DURING comment_2: SMOV. CYCLE 4 CALIBRATION comment_3: FLATS PROPOSAL SHOULD COMMENCE comment_4: IMMEDIATELY UPON COMPLETION comment_5: OF THIS PROPOSAL. ! linenum: 3.000 sequence_1: DEF EARTH targname: EARTH-CALIB config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F336W num_exp: 1 time_per_exp: 0.16S priority: 1 param_1: ATD-GAIN=15, req_1: SEQ 3-7 NON-INT; ! linenum: 4.000 sequence_1: DEF EARTH targname: EARTH-CALIB config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F375N num_exp: 1 time_per_exp: 7.0S priority: 1 param_1: ATD-GAIN=15, ! linenum: 5.000 sequence_1: DEF EARTH targname: EARTH-CALIB config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F502N num_exp: 1 time_per_exp: 0.8S priority: 1 param_1: ATD-GAIN=15, ! linenum: 6.000 sequence_1: DEF EARTH targname: EARTH-CALIB config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F656N num_exp: 1 time_per_exp: 0.35S priority: 1 param_1: ATD-GAIN=15, ! linenum: 7.000 sequence_1: DEF EARTH targname: EARTH-CALIB config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F953N num_exp: 1 time_per_exp: 0.8S priority: 1 param_1: ATD-GAIN=15, ! linenum: 20.000 sequence_1: USE EARTH ! linenum: 21.000 sequence_1: USE EARTH ! linenum: 22.000 sequence_1: USE EARTH ! linenum: 23.000 sequence_1: USE EARTH ! linenum: 24.000 sequence_1: USE EARTH ! linenum: 25.000 sequence_1: USE EARTH ! linenum: 26.000 sequence_1: USE EARTH ! linenum: 27.000 sequence_1: USE EARTH ! linenum: 28.000 sequence_1: USE EARTH ! linenum: 29.000 sequence_1: USE EARTH ! linenum: 30.000 sequence_1: USE EARTH ! linenum: 31.000 sequence_1: USE EARTH ! linenum: 32.000 sequence_1: USE EARTH ! linenum: 33.000 sequence_1: USE EARTH ! linenum: 34.000 sequence_1: USE EARTH ! linenum: 35.000 sequence_1: USE EARTH ! linenum: 36.000 sequence_1: USE EARTH ! linenum: 37.000 sequence_1: USE EARTH ! linenum: 38.000 sequence_1: USE EARTH ! linenum: 39.000 sequence_1: USE EARTH ! linenum: 40.000 sequence_1: USE EARTH ! linenum: 41.000 sequence_1: USE EARTH ! linenum: 42.000 sequence_1: USE EARTH ! linenum: 43.000 sequence_1: USE EARTH ! linenum: 44.000 sequence_1: USE EARTH ! linenum: 45.000 sequence_1: USE EARTH ! linenum: 46.000 sequence_1: USE EARTH ! linenum: 47.000 sequence_1: USE EARTH ! linenum: 48.000 sequence_1: USE EARTH ! linenum: 49.000 sequence_1: USE EARTH ! linenum: 50.000 sequence_1: USE EARTH ! linenum: 100.000 sequence_1: DEF VLAMP targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F300W num_exp: 3 time_per_exp: 1200S priority: 1 param_1: ATD-GAIN=15, ! linenum: 101.000 sequence_1: DEF VLAMP targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F375N num_exp: 3 time_per_exp: 1200S priority: 1 param_1: ATD-GAIN=15, ! linenum: 102.000 sequence_1: DEF VLAMP targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F502N num_exp: 3 time_per_exp: 300S priority: 1 param_1: ATD-GAIN=15, ! linenum: 103.000 sequence_1: DEF VLAMP targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F656N num_exp: 3 time_per_exp: 30S priority: 1 param_1: ATD-GAIN=15, ! linenum: 104.000 sequence_1: DEF VLAMP targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F953N num_exp: 3 time_per_exp: 50S priority: 1 param_1: ATD-GAIN=15, ! linenum: 105.000 sequence_1: DEF VLAMP targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F336W num_exp: 3 time_per_exp: 1000S priority: 1 param_1: ATD-GAIN=15, ! linenum: 106.000 sequence_1: DEF VLAMP targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F675W num_exp: 3 time_per_exp: .7S priority: 1 param_1: ATD-GAIN=15, ! linenum: 107.000 sequence_1: DEF VLAMP targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F814W num_exp: 3 time_per_exp: .7S priority: 1 param_1: ATD-GAIN=15, ! linenum: 121.000 sequence_1: USE VLAMP ! linenum: 122.000 sequence_1: USE VLAMP ! linenum: 123.000 sequence_1: USE VLAMP ! linenum: 200.000 sequence_1: DEF UVLAMP targname: UVFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F218W num_exp: 3 time_per_exp: 1200S priority: 1 param_1: ATD-GAIN=15, ! linenum: 201.000 sequence_1: DEF UVLAMP targname: UVFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F300W num_exp: 3 time_per_exp: 100S priority: 1 param_1: ATD-GAIN=15, ! linenum: 202.000 sequence_1: DEF UVLAMP targname: UVFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F336W num_exp: 3 time_per_exp: 100S priority: 1 param_1: ATD-GAIN=15, ! linenum: 220.000 sequence_1: USE UVLAMP ! linenum: 221.000 sequence_1: USE UVLAMP ! linenum: 222.000 sequence_1: USE UVLAMP ! ! end of exposure logsheet ! No scan data records found