! File: 5053C.PROP ! Database: PEPDB ! Date: 23-FEB-1994:17:51:53 coverpage: title_1: CYCLE 3 FOS LOCATION OF SPECTRA: Y-BASE MAPS proposal_for: CAL/FOS pi_fname: CHARLES (TONY) pi_lname: KEYES pi_inst: STSCI pi_country: USA pi_phone: 301-338-4975 hours_par: 1.90 fos: X ! end of coverpage abstract: line_1: In cycle 3 we will continue our program of monitoring y-bases line_2: by measuring the locations of spectra for the 0.3" aperture line_3: at all grating settings once every 2.5 months to verify line_4: repeatability and to measure any long-term drift. This test line_5: has the highest priority because our ability to acquire line_6: spectra depends on our knowledge of Y_Base balues. Total line_7: spacecraft time is 1.9 hours of NON-PRIME time. ! ! end of abstract general_form_proposers: lname: KEYES fname: CHARLES (TONY) inst: STSCI country: USA ! lname: KINNEY fname: ANNE inst: STSCI country: USA ! lname: KORATKAR fname: ANURADHA inst: STSCI country: USA ! lname: BOHLIN fname: RALPH inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! lname: TAYLOR fname: CYNTHIA inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: In this test, we will obtain data on the internal Pt-Ne lamps. Data will line_2: be obtained through the 0.3" apertures for 8 dispersers. line_3: The observations will map the face of the photocathode using 24 line_4: y-steps and 1 x-step. The program is to be performed for a line_5: total of 3 times, once every 75 days (plus or minus 10 days) line_6: starting 1 JUL 1993. ! question: 5 section: 1 line_1: All observations should be performed in NON-PRIME time. line_2: Each sequence should be performed within a 12 hour timeframe. line_4: Note that the high voltage MUST NOT be turned off (except line_5: possibly for SAA passages) once a sequence has begun. ! question: 6 section: 1 line_1: This test is not stray light sensitive. All observations are internal line_2: Pt-Ne lamp measurements. ! question: 7 section: 1 line_1: Data reduction and analysis will be performed at the STScI. line_2: This is a verification of line_3: ground-based analysis, so no data will need to be added to the PODPS pipeline. line_4: However, this program will determine the correct y-deflections to be used in line_5: obtaining data, and this information will need to be updated after any change line_6: in position is measured. ! !end of general form text general_form_address: lname: KEYES fname: CHARLES (TONY) category: PI inst: ST SCI addr_1: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 120.000 sequence_1: DEFINE sequence_2: Y-MAPB-S targname: WAVE config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: 6S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 req_1: SEQ 120-127 NO GAP; ! linenum: 121.000 sequence_1: DEFINE sequence_2: Y-MAPB-S targname: WAVE config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: G160L num_exp: 1 time_per_exp: 18S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 122.000 sequence_1: DEFINE sequence_2: Y-MAPB-S targname: WAVE config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: G650L num_exp: 1 time_per_exp: 6S priority: 1 ! linenum: 123.000 sequence_1: DEFINE sequence_2: Y-MAPB-S targname: WAVE config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: PRISM num_exp: 1 time_per_exp: 6S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 124.000 sequence_1: DEFINE sequence_2: Y-MAPB-S targname: WAVE config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 6S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 125.000 sequence_1: DEFINE sequence_2: Y-MAPB-S targname: WAVE config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: G190H num_exp: 1 time_per_exp: 36S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 126.000 sequence_1: DEFINE sequence_2: Y-MAPB-S targname: WAVE config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: G570H num_exp: 1 time_per_exp: 18S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 127.000 sequence_1: DEFINE sequence_2: Y-MAPB-S targname: WAVE config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: G130H num_exp: 1 time_per_exp: 90S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 130.000 sequence_1: DEFINE sequence_2: Y-MAPR-S targname: WAVE config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: G400H num_exp: 1 time_per_exp: 6S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 req_1: SEQ 130-137 NO GAP; ! linenum: 131.000 sequence_1: DEFINE sequence_2: Y-MAPR-S targname: WAVE config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: G160L num_exp: 1 time_per_exp: 72S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 132.000 sequence_1: DEFINE sequence_2: Y-MAPR-S targname: WAVE config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: G650L num_exp: 1 time_per_exp: 18S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 133.000 sequence_1: DEFINE sequence_2: Y-MAPR-S targname: WAVE config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: PRISM num_exp: 1 time_per_exp: 6S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 134.000 sequence_1: DEFINE sequence_2: Y-MAPR-S targname: WAVE config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: G780H num_exp: 1 time_per_exp: 6S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 135.000 sequence_1: DEFINE sequence_2: Y-MAPR-S targname: WAVE config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 24S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 136.000 sequence_1: DEFINE sequence_2: Y-MAPR-S targname: WAVE config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: G190H num_exp: 1 time_per_exp: 54S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 137.000 sequence_1: DEFINE sequence_2: Y-MAPR-S targname: WAVE config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: G570H num_exp: 1 time_per_exp: 6S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24 ! linenum: 202.000 sequence_1: USE sequence_2: Y-MAPB-S req_1: AT 1-JUL-1993 req_2: +/- 10D; req_3: CYCLE 3 / 202-208; ! linenum: 203.000 sequence_1: USE sequence_2: Y-MAPB-S req_2: AFTER 202 BY 75D req_3: +/- 10D; ! linenum: 204.000 sequence_1: USE sequence_2: Y-MAPB-S req_2: AFTER 203 BY 75D req_3: +/- 10D; ! linenum: 206.000 sequence_1: USE sequence_2: Y-MAPR-S req_1: AT 1-JUL-1993 req_2: +/- 10D; ! linenum: 207.000 sequence_1: USE sequence_2: Y-MAPR-S req_2: AFTER 206 BY 75D req_3: +/- 10D; ! linenum: 208.000 sequence_1: USE sequence_2: Y-MAPR-S req_2: AFTER 207 BY 75D req_3: +/- 10D; ! ! end of exposure logsheet ! No scan data records found