!  File:  5046C.PROP
!  Database:  PEPDB
!  Date:  23-FEB-1994:17:29:38

coverpage:

  title_1:         CYCLE3 FOS PHOTOMETRIC MONITOR
    proposal_for:  CAL/FOS
    pi_fname:      CHARLES (TONY)
    pi_lname:      KEYES
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      410-338-4975
    hours_pri:     7.50
    num_pri:       1
    fos:           Y
! end of coverpage

abstract:

    line_1:        A measurement of the absolute sensitivity of
    line_2:        the FOS detectors will be performed using a UV standard star.
    line_3:        The highest priority gratings will be used in the 4.3 arcsec
    line_4:        aperture.  Measurement of aperture throughput ratio will
    line_5:        be made with three representative spectral elements for the
    line_6:        apertures expected to be most commonly used in Cycle 3.
    line_7:        A four stage peakup of the standard star should provide
    line_8:        excellent centering in the small apertures. The switch to
    line_9:        the second side followed by the peakup in the 0.3 aperture
    line_10:       determines an accurate measure of the separation of the blue and
    line_11:       red side apertures in the focal plane with no extra expenditure of observing
    line_12:       time.  Two stars will be observed.  Aperture throughput
    line_13:       will be determined on one star only.

!
! end of abstract

general_form_proposers:

  lname:           KEYES
    fname:         CHARLES (TONY)
    title:         P.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           BOHLIN
    fname:         RALPH
    title:         C.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           KORATKAR
    fname:         ANURADHA
    title:         C.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           KINNEY
    fname:         ANNE
    title:         C.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           TAYLOR
    fname:         CYNTHIA
    title:         C.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        These measurements will provide the full photometric
    line_2:        calibration of the FOS in Cycle 3.

!

  question:        3
    section:       1
    line_1:        Spectra of a UV standard star will be obtained in 6 blue detector and 5 red
    line_2:        detector-grating combinations.  To assure registration of the spectrum on the
    line_3:        diode array, the stars will be observed at 3 y-bases with an 8-10 micron
    line_4:        separation.  Most of the spectra will be obtained in the 4.3
    line_5:        arcsec aperture, however, one star also will be observed
    line_6:        with the PRISM, G190H, and G160L dispersers through the
    line_7:        1.0" and 0.25"x2.0" apertures to calibrate them.
    line_8:        Standard star BD+28D4211 is the primary object to be
    line_9:        observed - it will be used for aperture throughput observations.
    line_10:       Either BD+33D2642 or G191-B2B will be observed with 4.3
    line_11:       aperture ONLY.

!

  question:        5
    section:       1
    line_1:        PREREQUISITES:
    line_2:        1) Pointing stability of 10% of the smallest aperture used
    line_3:        (0.3") - 0.03" - is required.

!

  question:        7
    section:       1
    line_1:        Data reduction will be performed at the STScI with the results used
    line_2:        to update the RSDP inverse sensitivity files and to determine the need for a
    line_3:        full photometric recalibration of the FOS.

!
!end of general form text

general_form_address:

  lname:           KEYES
    fname:         CHARLES (TONY)
    category:      PI
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA
    phone:         410-338-4975

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        BD+28D4211
    name_2:        GSC 2214-1198
    descr_1:       J,702
    pos_1:         RA = 21H 51M 11.1S +/- 0.01S,
    pos_2:         DEC = +28D 51' 51.8" +/- 0.2",
    pos_3:         PLATE-ID=01LR
    equinox:       2000
    comment_1:     THE GSC NAME IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 10.53 +/- 0.05
    fluxnum_2:     2
    fluxval_2:     B = 10.19 +/- 0.05

!

    targnum:       2
    name_1:        BD+33D2642
    name_2:        GSC2575-481
    descr_1:       J,702
    pos_1:         RA = 15H 51M 59.9S +/- 0.02S,
    pos_2:         DEC = +32D 56' 54.8" +/- 0.3",
    pos_3:         PLATE-ID=01RN
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V = 10.83 +/- 0.05
    fluxnum_2:     2
    fluxval_2:     B = 10.66 +/- 0.05

!

    targnum:       3
    name_1:        HZ-44
    name_2:        GSC2541-142
    descr_1:       J,702
    pos_1:         RA = 13H 23M 35.4S +/- 0.02S,
    pos_2:         DEC = +36D 08' 00.0" +/- 0.3",
    pos_3:         PLATE-ID=01QW
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V = 11.71 +/- 0.05

!

    targnum:       4
    name_1:        WD0501+527
    name_2:        G191-B2B
    name_3:        GSSS3734-0506
    descr_1:       J,705,702
    pos_1:         RA=05H 05M 30.6S +/- 0.01S,
    pos_2:         DEC=+52D 49' 54.0" +/- 0.2"
    equinox:       2000
    pm_or_par:     Y
    pos_epoch_bj:  J
    pos_epoch_yr:  1983.10
    ra_pm_val:     0.000500
    ra_pm_unct:    0.000300
    dec_pm_val:    -0.0880
    dec_pm_unct:   0.0050
    comment_1:     THE GUIDE STAR CATALOG NAME
    comment_2:     IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 11.78 +/- 0.02
    fluxnum_2:     2
    fluxval_2:     B = 11.44 +/- 0.02
    fluxnum_3:     3
    fluxval_3:     U = 10.24 +/- 0.02

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEFINE
    sequence_2:    PTARG
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    #
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    param_1:       SEARCH-SIZE-X=1,
    param_2:       SEARCH-SIZE-Y=3,
    param_3:       SCAN-STEP-Y=1.4
    req_1:         SEQ 1-3 NO GAP;

!

    linenum:       2.000
    sequence_1:    DEFINE
    sequence_2:    PTARG
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    #
    num_exp:       1
    time_per_exp:  0.25S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=6,
    param_2:       SEARCH-SIZE-Y=2,
    param_3:       SCAN-STEP-X=0.7,
    param_4:       SCAN-STEP-Y=0.7,

!

    linenum:       3.000
    sequence_1:    DEFINE
    sequence_2:    PTARG
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    #
    num_exp:       1
    time_per_exp:  0.45S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SCAN-STEP-X=0.2,
    param_3:       SEARCH-SIZE-Y=5,
    param_4:       SCAN-STEP-Y=0.2
    comment_1:     PEAK-UP SEQUENCE;

!

    linenum:       4.000
    sequence_1:    DEFINE
    sequence_2:    PTWEAK
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    #
    num_exp:       1
    time_per_exp:  2.25S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SCAN-STEP-X=0.05,
    param_3:       SEARCH-SIZE-Y=5,
    param_4:       SCAN-STEP-Y=0.05
    comment_1:     TWEAK UP TARGET IN 0.3 APERTURE;

!

    linenum:       5.000
    sequence_1:    DEFINE
    sequence_2:    SLITWEAK
    targname:      #
    config:        #
    opmode:        ACQ/PEAK
    aperture:      0.25X2.0
    sp_element:    #
    num_exp:       1
    time_per_exp:  2.25S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=7,
    param_2:       SEARCH-SIZE-Y=1,
    param_3:       SCAN-STEP-X=0.05,
    comment_1:     TWEAK UP TARGET IN 0.25X2.0 APERTURE;

!

    linenum:       10.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  147S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 10-12 NO GAP;

!

    linenum:       11.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  28S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       12.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      #
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  5S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       20.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 20-22.5 NO GAP;

!

    linenum:       21.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  15S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       22.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  2.7S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       22.100
    sequence_1:    DEFINE
    sequence_2:    BD28-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  531S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.442

!

    linenum:       22.200
    sequence_1:    DEFINE
    sequence_2:    BD28-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       22.300
    sequence_1:    DEFINE
    sequence_2:    BD28-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.133

!

    linenum:       22.400
    sequence_1:    DEFINE
    sequence_2:    BD28-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.133

!

    linenum:       22.500
    sequence_1:    DEFINE
    sequence_2:    BD28-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,

!

    linenum:       30.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  101S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 30-32 NO GAP;

!

    linenum:       31.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  14S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       32.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      #
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  366S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       33.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-A
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  300S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.4,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF
    req_1:         SEQ 33-36.5 NO GAP;

!

    linenum:       33.500
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-A
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  560S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.4,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       34.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-A
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  120S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.4,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       34.500
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-A
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  85S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.4,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       35.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-B
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  85S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.4,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       35.500
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-B
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  300S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.4,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       36.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-B
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  560S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.4,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       36.500
    sequence_1:    DEFINE
    sequence_2:    BD28-B-PR
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      1.0-PAIR-B
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  120S
    priority:      1
    param_1:       Y-SIZE=3,
    param_2:       Y-SPACE=21.4,
    param_3:       COMB=YES,
    param_4:       SUB-STEP=4,
    param_5:       Y=DEF

!

    linenum:       40.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  55S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 40-42.3 NO GAP;

!

    linenum:       41.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  8S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       42.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       42.100
    sequence_1:    DEFINE
    sequence_2:    BD28-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  371S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.618

!

    linenum:       42.200
    sequence_1:    DEFINE
    sequence_2:    BD28-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.333

!

    linenum:       42.300
    sequence_1:    DEFINE
    sequence_2:    BD28-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  55S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.458

!

    linenum:       50.000
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  270S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 50-52.5 NO GAP;

!

    linenum:       51.000
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  90S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       52.000
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  10S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.111,

!

    linenum:       52.100
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  1466S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,

!

    linenum:       52.200
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  480S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.622,

!

    linenum:       52.300
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  300S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.266

!

    linenum:       52.400
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  240S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.355

!

    linenum:       52.500
    sequence_1:    DEFINE
    sequence_2:    G191-R-43
    targname:      WD0501+527
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,

!

    linenum:       60.000
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 60-62.3 NO GAP;

!

    linenum:       61.000
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  20S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.216,

!

    linenum:       62.000
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  360S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       62.100
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  480S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.450

!

    linenum:       62.200
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  480S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.550

!

    linenum:       62.300
    sequence_1:    DEFINE
    sequence_2:    G191-B-43
    targname:      WD0501+527
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  300S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,

!

    linenum:       200.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G570H
    req_1:         SEQ 200-204 NO GAP;
    req_2:         ONBOARD ACQ FOR 200.1;
    req_3:         CYCLE 3 / 200-419.1;

!

    linenum:       200.100
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G570H
    req_1:         ONBOARD ACQ FOR 203-203.5;

!

    linenum:       203.000
    sequence_1:    USE
    sequence_2:    BD28-B
    targname:      BD+28D4211
    aperture:      1.0
    comment_1:     SCHEDULE TARGET BD+28 IN
    comment_2:     JUN/JULY.

!

    linenum:       203.050
    sequence_1:    USE
    sequence_2:    BD28-B-PR
    targname:      BD+28D4211

!

    linenum:       203.100
    sequence_1:    USE
    sequence_2:    BD28-B-43
    targname:      BD+28D4211

!

    linenum:       203.500
    sequence_1:    USE
    sequence_2:    SLITWEAK
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G570H
    req_1:         ONBOARD ACQ FOR 204;

!

    linenum:       204.000
    sequence_1:    USE
    sequence_2:    BD28-B
    targname:      BD+28D4211
    aperture:      0.25X2.0
    time_per_exp:  X1.5

!

    linenum:       210.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+28D4211
    config:        FOS/RD
    sp_element:    G780H
    req_1:         SEQ 210-222 NO GAP;
    req_2:         ONBOARD ACQ FOR 216;

!

    linenum:       216.000
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+28D4211
    config:        FOS/RD
    sp_element:    G780H
    req_1:         ONBOARD ACQ FOR 219-219.5;

!

    linenum:       219.000
    sequence_1:    USE
    sequence_2:    BD28-R
    targname:      BD+28D4211
    aperture:      1.0

!

    linenum:       219.100
    sequence_1:    USE
    sequence_2:    BD28-R-43
    targname:      BD+28D4211

!

    linenum:       219.500
    sequence_1:    USE
    sequence_2:    SLITWEAK
    targname:      BD+28D4211
    config:        FOS/RD
    sp_element:    G780H
    req_1:         ONBOARD ACQ FOR 220;

!

    linenum:       220.000
    sequence_1:    USE
    sequence_2:    BD28-R
    targname:      BD+28D4211
    aperture:      0.25X2.0
    time_per_exp:  X1.5

!

    linenum:       221.000
    targname:      BD+28D4211
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  0.45S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=5,
    param_2:       SCAN-STEP-X=0.2,
    param_3:       SEARCH-SIZE-Y=5,
    param_4:       SCAN-STEP-Y=0.2
    req_1:         ONBOARD ACQ FOR 222;
    comment_1:     SIDE_SWITCH FOR PEAKUP ONLY.
    comment_2:     PLACE
    comment_3:     IN SAME OBSET AS LINES 210-220

!

    linenum:       222.000
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+28D4211
    config:        FOS/BL
    sp_element:    G570H
    req_1:         ONBOARD ACQ FOR 223
    comment_1:     SIDE_SWITCH FOR PEAKUP ONLY.
    comment_2:     PLACE
    comment_3:     IN SAME OBSET AS LINES 210-220;.

!

    linenum:       223.000
    targname:      BD+28D4211
    config:        FOS/BL
    opmode:        ACCUM
    aperture:      0.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  120S
    fluxnum_1:     1
    priority:      1

!

    linenum:       300.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+33D2642
    config:        FOS/BL
    sp_element:    G570H
    req_1:         SEQ 300-303.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 300.1;
    req_3:         COND IF TARGET AVAILABLE
    req_4:         / 300-319.1; SELECT 1 OF
    req_5:         300-319.1 OR 400-419.1;
    comment_1:     PREFER NOV BUT OCT-DEC OK.
    comment_2:     CHOOSE ONE OF BD+33
    comment_3:     OR WD0501+527.

!

    linenum:       300.100
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+33D2642
    config:        FOS/BL
    sp_element:    G570H
    req_1:         ONBOARD ACQ FOR 303.1;

!

    linenum:       303.100
    sequence_1:    USE
    sequence_2:    BD28-B-43
    targname:      BD+33D2642

!

    linenum:       310.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      BD+33D2642
    config:        FOS/RD
    sp_element:    G780H
    req_1:         SEQ 310-319.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 316;

!

    linenum:       316.000
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      BD+33D2642
    config:        FOS/RD
    sp_element:    G780H
    req_1:         ONBOARD ACQ FOR 319.1;

!

    linenum:       319.100
    sequence_1:    USE
    sequence_2:    BD28-R-43
    targname:      BD+33D2642

!

    linenum:       400.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      WD0501+527
    config:        FOS/BL
    sp_element:    G570H
    time_per_exp:  X3
    req_1:         SEQ 400-403.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 400.1;
    req_3:         COND IF TARGET AVAILABLE
    req_4:         / 400-419.1;
    comment_1:     PREFER NOV BUT OCT-DEC OK.
    comment_2:     CHOOSE ONE OF BD+33
    comment_3:     OR WD0501+527.

!

    linenum:       400.100
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      WD0501+527
    config:        FOS/BL
    sp_element:    G570H
    time_per_exp:  X3
    req_1:         ONBOARD ACQ FOR 403.1;

!

    linenum:       403.100
    sequence_1:    USE
    sequence_2:    G191-B-43

!

    linenum:       410.000
    sequence_1:    USE
    sequence_2:    PTARG
    targname:      WD0501+527
    config:        FOS/RD
    sp_element:    G780H
    time_per_exp:  X3
    req_1:         SEQ 410-419.1 NO GAP;
    req_2:         ONBOARD ACQ FOR 416;

!

    linenum:       416.000
    sequence_1:    USE
    sequence_2:    PTWEAK
    targname:      WD0501+527
    config:        FOS/RD
    sp_element:    G780H
    time_per_exp:  X3
    req_1:         ONBOARD ACQ FOR 419.1;

!

    linenum:       419.100
    sequence_1:    USE
    sequence_2:    G191-R-43

!
! end of exposure logsheet

! No scan data records found