! $Id: 4908,v 4.1 1994/07/27 14:59:04 pepsa Exp $ coverpage: title_1: SMOV FOS/FGS FINE ALIGNMENT proposal_for: SMC/FOS pi_title: DR. pi_fname: ANNE pi_lname: KINNEY pi_inst: STSCI pi_country: USA pi_phone: (410)338-4831 keywords_1: FOS,SMOV num_pri: 1 fos: Y realtime: Y ! end of coverpage abstract: line_1: Fine FOS/FGS alignment will be determined. A TALED image in the 0.3 followed by line_2: an INT ACQ and a confirming ACQ image in the 4.3 will be obtained. Lastly, a line_3: fine ACQ/PEAK and confirming ACQ IMAGE will be taken. PASS reports will be line_4: analyzed in conjunction with the observations to allow determination of (V2,V3) line_5: positioning. line_6: The goal is to measure the precise plate scale and orientation. This will be line_7: acheived by performing a raster step and dwell sequence in the 4.3 arcsec line_8: aperture. The edges of the aperture should be avoided to prevent vignetting line_9: effects. An aperture map is required at each step of the dwell sequence. This line_10: test has to be conducted for both the RED and BLUE detectors. We will also line_11: determine the offset between the two detectors. line_12: The goal is to measure the precise aperture locations and sizes. The analysis line_13: of the observations will result in database changes to the table of aperture line_14: locations. Aperture maps of the TALEDs and an elliptical galaxy with a flat line_15: energy distribution in the nucleus which uniformly fill the apertures will be line_16: used to roughly determine the location of the apertures. Next the precise line_17: aperture locations will be detrmined by performing a raster step and dwell line_18: sequence in the FOS apertures along the edges of the apertures. An aperture map line_19: is required at each step of the dwell sequence. This test has tobe conducted for line_20: both the RED and BLUE detectors. ! ! end of abstract general_form_proposers: lname: TAYLOR fname: CYNTHIA mi: J inst: STSCI country: USA ! lname: KEYES fname: CHARLES (TONY) mi: D inst: STSCI country: USA ! lname: KINNEY fname: ANNE mi: L inst: STSCI country: USA ! lname: KORATKAR fname: ANURADHA mi: P inst: STSCI country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: First a TALED FOS/RED ACQ IMAGE of the 0.3 aperture will be obtained. Next line_2: an INT ACQ on a star in an astrometric field in NGC 188 with the 4.3 aperture line_3: will be performed. Then, a confirming ACQ IMAGE of the field will be made with line_4: the 4.3 aperture. Lastly, a fine 5x5 ACQ/PEAK with the 0.3 aperture and a line_5: confirming ACQ IMAGE will be taken. PASS reports will be analyzed to determine line_6: (V2,V3) pointing of the exposures to assess fine positioning of the FOS line_7: aperture. The entire procedure will be repeated with FOS/BLUE. line_8: Since the FOS apertures are nested about the same position on the photocathode, line_9: an accurate plate scale and orientation cannot be derived as for the other line_10: instruments with widely separated apertures, as projected on the photocathodes. line_11: Therefore, the precise FOS place scale and orientation will be determined as line_12: follows: Perform a raster step and dwell sequence in the 4.3 arcsec aperture, line_13: using a 0.775 arcsec step size on a 3.1X3.1 arcsec grid. The edges of the 4.3 line_14: arcsec aperture should be avoided to prevent vignetting effects. An aperture map line_15: is required at each step in the dwell sequence. line_16: Since the target will be accurately centered for the raster scans in both the line_17: red and blue detectors, we will simultaneously determine the offsets between line_18: the two detectors. ! question: 3 section: 2 line_1: In the first part of the aperture location test the aperture locations will be line_2: determined from aperture maps of the TALEDs and an elliptical galaxy line_3: with a flat energy distribution in the nucleus which uniformly fill line_4: the apertures. This flat distribution will be used to roughly determine the line_5: edges of the apertures. This will also simultaneously measure the mean sizes of line_6: the FOS apertures and the relative throughput as long as the flat field source line_7: is constant over the time between aperture maps. line_8: Next the precise aperture locations of the small apertures will be determined line_9: by performing a raster step and dwell sequence in the apertures along two line_10: perpendicular directions in the apertures to find the maximum throughput for the line_11: small apertures. This technique provides the most precise V2V3 locations. The line_12: imaging of the large apertures and the dwell scans of the small aperture will line_13: provide the most precise locations of the apertures in the V2V3 frame and line_14: relative to each other. ! question: 5 section: 1 line_1: Interactive acquisition is an absolute requirement ONLY FOR the fine FOS/FGS line_2: fine alignment part of the proposal so that positioning updates can be performed line_3: as necessary between the steps of the fine alignment procedure. line_5: PREREQUISITES: COSTAR/FOS FINE ALIGNMENT TILT (4747) should be complete and line_6: the COSTAR mechanisms in the final SMOV positions. line_7: This proposal consists of 4 parts: line_8: Part 1 = lines 0.5-6.5. line_9: Part 2 = lines 11-13.6. line_10: Part 3a = lines 101-214.5. line_11: Part 3b = lines 301-416.5. line_12: The FGS encoder values are to be extracted and recorded during the step and line_13: dwell sequences. The center point in the spatial scan should have the object line_14: centered in the aperture. line_15: PREREQS FOR LINES 11-13.6(pt. 2): FOS/FGS FINE ALIGNMENT LINES 0.5-6.5(pt. 1). line_16: The aperture location (imaging and dwell scans) part of this proposal should be line_17: scheduled after the FOS/FGS fine alignment proposal. The TALED and external maps line_18: of any specific aperture must be obtained NON-INT due to the floppy nature of line_19: the filter-grating wheel. line_20: PREREQS FOR LINES 101-214.5(pt.3a): FOS/FGS FINE ALIGNMENT LINES 0.5-6.5(pt.1). line_21: PREREQS FOR LINES 301-416.5(pt.3b): FOS/FGS FINE ALIGNMENT- line_22: LINES 101-214.5(pt.3a). ! question: 5 section: 2 line_1: Start all spatial scans in the center of the aperture. Do not line_2: offset pointing to center the scan on the aperture. line_3: Pointing stability of 10% of the smallest aperture (0.1") line_4: used - 0.01" - is required for the FOS data. line_5: The overlight limit must be set to the default value for non-mirror line_6: observations (12 million), even though the MIRROR is used. line_7: All observations in this program MUST occur in non-SAA impacted line_8: orbits. line_9: Lines 101-214.5(pt. 3a) should be conducted at least 2 weeks after the line_10: FOS/FGS fine alignment part of the proposal. line_11: Lines 301-416.5(pt. 3b) should be conducted at least 2 weeks after the line_12: aperture location imaging part of the proposal. line_13: Lines 11-13.6(pt. 2) should be conducted at least 2 weeks after the line_14: FOS/FGS fine alignment part of the proposal. line_15: Lines 11-13.6(pt. 2) and lines 101-214.5(pt. 3a) can be conducted in parallel. line_16: Analysis of these lines requires PDB update followed line_17: by another PDB update after the analysis of lines 301-416.5(pt. 3b). ! question: 7 section: 1 line_1: Data reduction will be performed at ST ScI. line_2: PDB update of aperture locations, sizes and plate scale expected. ! !end of general form text general_form_address: lname: Kinney fname: Anne category: PI inst: STSCI addr_1: 3700 San Martin Dr city: Baltimore state: MD zip: 21218 country: USA phone: 410 338-4831 ! lname: Taylor fname: Cynthia mi: J inst: STSCI addr_1: 3700 San Martin Dr city: Baltimore state: MD zip: 21218 country: USA phone: 410 338-5084 ! lname: Keyes fname: Charles (Tony) mi: D inst: STSCI addr_1: 3700 San Martin Dr city: Baltimore state: MD zip: 21218 country: USA phone: 410 338-4975 ! lname: Koratkar fname: Anuradha mi: P inst: STSCI addr_1: 3700 San Martin Dr city: Baltimore state: MD zip: 21218 country: USA phone: 410 338-4470 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: NGC188-255 name_2: GSSS3788900057 descr_1: J,701,707 pos_1: RA=00H 44M 21.171S +/- 0.01S, pos_2: DEC=+85D 26' 29.10" +/- 0.1", pos_3: PLATE-ID=ZZZZ, equinox: 2000 fluxnum_1: 1 fluxval_1: V = 13.42 +/- 0.1 fluxnum_2: 2 fluxval_2: B = 13.61 +/- 0.1 ! targnum: 2 name_1: NGC4374 descr_1: J,303,707 pos_1: RA=12H 25M 3.78S +/- 0.2", pos_2: DEC = +12D 53' 12.85" +/- 0.2" equinox: 2000 pm_or_par: N fluxnum_1: 1 fluxval_1: SURF(V)=16 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 0.500 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 req_1: CYCLE 4 / 0.5-416.5; comment_1: SWITCH TO FMT FN ENG TLM ! linenum: 1.000 targname: TALED config: FOS/RD opmode: ACQ aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 req_1: SEQ 0.50-3.5 NO GAP; req_2: RT ANALYSIS; ! linenum: 2.000 targname: NGC188-255 config: FOS/RD opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 256S fluxnum_1: 1 fluxnum_2: 2 priority: 1 req_1: INT ACQ FOR 3; ! linenum: 3.000 targname: NGC188-255 config: FOS/RD opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 256S fluxnum_1: 1 fluxnum_2: 2 priority: 1 comment_1: CONFIRMATION ACQ IMAGE. ! linenum: 3.100 targname: NGC188-255 config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 4S fluxnum_1: 1 fluxnum_2: 2 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.17, param_4: SCAN-STEP-Y=0.17, req_1: ONBOARD ACQ FOR 3.2; comment_1: FINE PEAKUP. ! linenum: 3.200 targname: NGC188-255 config: FOS/RD opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 256S fluxnum_1: 1 fluxnum_2: 2 priority: 1 comment_1: CONFIRMATION ACQ IMAGE. ! linenum: 3.500 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH BACK TO FMT AN TLM ! linenum: 3.750 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH TO FMT FN ENG TLM ! linenum: 4.000 targname: TALED config: FOS/BL opmode: ACQ aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 req_1: SEQ 3.75-6.5 NO GAP; req_2: RT ANALYSIS; ! linenum: 5.000 targname: NGC188-255 config: FOS/BL opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 768S fluxnum_1: 1 fluxnum_2: 2 priority: 1 req_1: INT ACQ FOR 6; ! linenum: 6.000 targname: NGC188-255 config: FOS/BL opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 768S fluxnum_1: 1 fluxnum_2: 2 priority: 1 comment_1: CONFIRMATION ACQ IMAGE. ! linenum: 6.100 targname: NGC188-255 config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 12S fluxnum_1: 1 fluxnum_2: 2 priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.17, param_4: SCAN-STEP-Y=0.17, req_1: ONBOARD ACQ FOR 6.2; comment_1: FINE PEAKUP. ! linenum: 6.200 targname: NGC188-255 config: FOS/BL opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 768S fluxnum_1: 1 fluxnum_2: 2 priority: 1 comment_1: CONFIRMATION ACQ IMAGE. ! linenum: 6.500 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH BACK TO FMT AN TLM ! linenum: 11.000 targname: NGC188-255 config: FOS/BL opmode: ACQ/BINARY aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 2S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 11.25-11.5; req_2: AFTER 6.5 BY 14D; req_3: SEQ 11-13.6 NO GAP; ! linenum: 11.250 targname: NGC188-255 config: FOS/BL opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S fluxnum_1: 1 priority: 1 comment_1: CONFIRMATION ACQ IMAGE. ! linenum: 11.500 targname: NGC188-255 config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 4S fluxnum_1: 1 priority: 1 param_5: SEARCH-SIZE-X=5, param_6: SEARCH-SIZE-Y=5, param_7: SCAN-STEP-X=0.18, param_8: SCAN-STEP-Y=0.18 req_1: ONBOARD ACQ FOR 11.75-12.9; ! linenum: 11.750 targname: NGC188-255 config: FOS/BL opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S fluxnum_1: 1 priority: 1 comment_1: CONFIRMATION ACQ IMAGE. ! linenum: 12.000 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH TO TELEMETRY FORMAT FN comment_2: LINE 12 PROVIDES 32K ENGINEERING DATA comment_3: FOR FGS ENCODER READINGS DURING SCAN comment_4: IN LINES 12.1-12.5. ! linenum: 12.100 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=16, param_3: COMB=YES, param_4: Y-SPACE=50, req_1: SPATIAL SCAN; ! linenum: 12.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=16, param_3: COMB=YES, param_4: Y-SPACE=50, req_1: SPATIAL SCAN; ! linenum: 12.600 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH BACK TO TELEMETRY FORMAT AN ! linenum: 12.800 targname: NGC188-255 config: FOS/BL opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S fluxnum_1: 1 priority: 1 ! linenum: 12.850 targname: NGC188-255 config: FOS/RD opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S fluxnum_1: 1 priority: 1 comment_1: SIDE SWITCH. ! linenum: 12.900 targname: NGC188-255 config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 4S fluxnum_1: 1 priority: 1 param_5: SEARCH-SIZE-X=5, param_6: SEARCH-SIZE-Y=5, param_7: SCAN-STEP-X=0.18, param_8: SCAN-STEP-Y=0.18 req_1: ONBOARD ACQ FOR 12.95-13.6; comment_1: SIDE SWITCH ACQ. ! linenum: 12.950 targname: NGC188-255 config: FOS/RD opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S fluxnum_1: 1 priority: 1 comment_1: CONFIRMATION ACQ IMAGE. ! linenum: 13.000 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH TO TELEMETRY FORMAT FN comment_2: LINE 13 PROVIDES 32K ENGINEERING DATA comment_3: FOR FGS ENCODER READINGS DURING SCAN comment_4: IN LINES 13.1-13.5. ! linenum: 13.100 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=16, param_3: COMB=YES, param_4: Y-SPACE=50, req_1: SPATIAL SCAN; ! linenum: 13.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 param_1: SUB-STEP=4, param_2: Y-SIZE=16, param_3: COMB=YES, param_4: Y-SPACE=50, req_1: SPATIAL SCAN; ! linenum: 13.600 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH BACK TO TELEMETRY FORMAT AN ! linenum: 101.000 targname: NGC4374 config: FOS/RD opmode: ACQ/PEAK aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 2S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=1, param_2: SEARCH-SIZE-Y=3, param_3: SCAN-STEP-Y=1.2, req_1: ONBOARD ACQ FOR 102.0-114.5; req_2: AFTER 6.5 BY 14D; ! linenum: 102.000 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES req_1: SEQ 102-114.5 NO GAP; comment_1: THE OVERLIGHT LIMIT MUST BE SET TO comment_2: 12 MILLION FOR ALL EXPOSURES; THIS comment_3: IS NON-STANDARD WITH THE CAM MIRROR. ! linenum: 102.500 targname: TALED config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES req_1: SEQ 102-102.5 NON-INT; ! linenum: 103.000 targname: TALED config: FOS/RD opmode: IMAGE aperture: 0.5 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES req_1: SEQ 103-103.5 NON-INT; ! linenum: 103.500 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 0.5 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES ! linenum: 104.000 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES req_1: SEQ 104-104.5 NON-INT; ! linenum: 104.500 targname: TALED config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES ! linenum: 106.000 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 0.25X2.0 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES req_1: SEQ 106-106.5 NON-INT; ! linenum: 106.500 targname: TALED config: FOS/RD opmode: IMAGE aperture: 0.25X2.0 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES ! linenum: 107.000 targname: TALED config: FOS/RD opmode: IMAGE aperture: 2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES req_1: SEQ 107-107.5 NON-INT; ! linenum: 107.500 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES ! linenum: 108.000 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 0.7X2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES req_1: SEQ 108-108.5 NON-INT; ! linenum: 108.500 targname: TALED config: FOS/RD opmode: IMAGE aperture: 0.7X2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES ! linenum: 109.000 targname: TALED config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES req_1: SEQ 109-109.5 NON-INT; ! linenum: 109.500 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES ! linenum: 110.000 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 1.0-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=264 req_1: SEQ 110-110.5 NON-INT; ! linenum: 110.500 targname: TALED config: FOS/RD opmode: IMAGE aperture: 1.0-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=264 ! linenum: 111.000 targname: TALED config: FOS/RD opmode: IMAGE aperture: 0.5-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=264 req_1: SEQ 111-111.5 NON-INT; ! linenum: 111.500 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 0.5-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=264 ! linenum: 112.000 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 0.5-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=-264 req_1: SEQ 112-112.5 NON-INT; ! linenum: 112.500 targname: TALED config: FOS/RD opmode: IMAGE aperture: 0.5-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=-264 ! linenum: 113.000 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 1.0-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=-264 req_1: SEQ 113-113.5 NON-INT; ! linenum: 113.500 targname: TALED config: FOS/RD opmode: IMAGE aperture: 1.0-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=-264 ! linenum: 114.000 targname: TALED config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES req_1: SEQ 114-114.5 NON-INT; ! linenum: 114.500 targname: NGC4374 config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES ! linenum: 201.000 targname: NGC4374 config: FOS/BL opmode: ACQ/PEAK aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 2S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE-X=1, param_2: SEARCH-SIZE-Y=3, param_3: SCAN-STEP-Y=1.2, req_1: ONBOARD ACQ FOR 202-214.5; req_2: AFTER 6.5 BY 14D; ! linenum: 202.000 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES comment_1: THE OVERLIGHT LIMIT MUST BE SET TO comment_2: 80 MILLION FOR ALL EXPOSURES; THIS comment_3: IS NON-STANDARD WITH THE CAM MIRROR. ! linenum: 202.500 targname: TALED config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES req_1: SEQ 202-202.5 NON-INT; ! linenum: 203.000 targname: TALED config: FOS/BL opmode: IMAGE aperture: 0.5 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES req_1: SEQ 203-203.5 NON-INT; ! linenum: 203.500 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 0.5 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES ! linenum: 204.000 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES req_1: SEQ 204-204.5 NON-INT; ! linenum: 204.500 targname: TALED config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES ! linenum: 206.000 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 0.25X2.0 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES req_1: SEQ 206-206.5 NON-INT; ! linenum: 206.500 targname: TALED config: FOS/BL opmode: IMAGE aperture: 0.25X2.0 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES ! linenum: 207.000 targname: TALED config: FOS/BL opmode: IMAGE aperture: 2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES req_1: SEQ 207-207.5 NON-INT; ! linenum: 207.500 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES ! linenum: 208.000 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 0.7X2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES req_1: SEQ 208-208.5 NON-INT; ! linenum: 208.500 targname: TALED config: FOS/BL opmode: IMAGE aperture: 0.7X2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=16, param_3: SUB-STEP=8, param_4: COMB=YES ! linenum: 209.000 targname: TALED config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES req_1: SEQ 209-209.5 NON-INT; ! linenum: 209.500 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES ! linenum: 210.000 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 1.0-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=264 req_1: SEQ 210-210.5 NON-INT; ! linenum: 210.500 targname: TALED config: FOS/BL opmode: IMAGE aperture: 1.0-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=264 ! linenum: 211.000 targname: TALED config: FOS/BL opmode: IMAGE aperture: 0.5-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=264 req_1: SEQ 211-211.5 NON-INT; ! linenum: 211.500 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 0.5-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=264 ! linenum: 212.000 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 0.5-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=-264 req_1: SEQ 212-212.5 NON-INT; ! linenum: 212.500 targname: TALED config: FOS/BL opmode: IMAGE aperture: 0.5-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=-264 ! linenum: 213.000 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 1.0-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=-264 req_1: SEQ 213-213.5 NON-INT; ! linenum: 213.500 targname: TALED config: FOS/BL opmode: IMAGE aperture: 1.0-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=12, param_3: SUB-STEP=8, param_4: COMB=YES, param_5: Y-OFFSET=-264 ! linenum: 214.000 targname: TALED config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES req_1: SEQ 214-214.5 NON-INT; ! linenum: 214.500 targname: NGC4374 config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 param_1: Y-SIZE=64, param_2: Y-SPACE=24, param_3: SUB-STEP=4, param_4: COMB=YES ! linenum: 301.000 targname: NGC188-255 config: FOS/BL opmode: ACQ/BINARY aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 2S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 301.2-301.3; req_2: AFTER 214.5 BY 14D; ! linenum: 301.200 targname: NGC188-255 config: FOS/BL opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 ! linenum: 301.300 targname: NGC188-255 config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 4S priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.12, param_4: SCAN-STEP-Y=0.12, req_1: ONBOARD ACQ FOR 301.4-308.9; ! linenum: 301.400 targname: NGC188-255 config: FOS/BL opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 ! linenum: 301.900 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH TO TELEMETRY FORMAT FN comment_2: LINE 301.9 PROVIDES 32K ENGINEERING comment_3: DATA FOR FGS ENCODER READINGS DURING comment_4: SCAN IN LINES 302-308.1. ! linenum: 302.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 302-302.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 302.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 303.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 303-303.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 303.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE 1.0 comment_4: APERTURE, USING 0.093" PER STEP. ! linenum: 304.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 304-304.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 304.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 305.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 305-305.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 305.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE 0.3 comment_4: APERTURE, USING 0.031" PER STEP. ! linenum: 306.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.25X2.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 306-306.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 306.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.25X2.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. comment_3: THE PRECEDING IS A SEQUENCE TO comment_4: LOCATE THE WIDTH OF THE SLIT, comment_5: USING 0.025" PER STEP. ! linenum: 307.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 307-307.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 307.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. comment_3: THE PRECEDING IS A SEQUENCE TO comment_4: LOCATE THE WIDTH OF THE BAR, comment_5: USING 0.031" PER STEP. ! linenum: 308.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.7X2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 308-308.1 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 308.100 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.7X2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. comment_3: THE PRECEDING IS A SEQUENCE TO comment_4: LOCATE THE WIDTH OF THE BAR, comment_5: USING 0.031" PER STEP. ! linenum: 308.500 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH BACK TO TELEMETRY FORMAT AN ! linenum: 308.900 targname: NGC188-255 config: FOS/BL opmode: ACQ/PEAK aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 6S priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.1, param_4: SCAN-STEP-Y=0.1, req_1: ONBOARD ACQ FOR 308.95; ! linenum: 308.950 targname: NGC188-255 config: FOS/BL opmode: ACQ/PEAK aperture: 0.1-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 6S priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.03, param_4: SCAN-STEP-Y=0.03, req_1: ONBOARD ACQ FOR 309.0-312.9; ! linenum: 309.000 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH TO TELEMETRY FORMAT FN comment_2: LINE 309 PROVIDES 32K ENGINEERING DATA comment_3: FOR FGS ENCODER READINGS DURING SCAN comment_4: IN LINES 309.1-312.1. ! linenum: 309.100 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 309.1-309.5 NO GAP; ! linenum: 309.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; ! linenum: 310.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 310-310.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 310.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE comment_4: 0.25-LOWER PAIR APERTURES, USING comment_5: 0.019" PER STEP. ! linenum: 311.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.1-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 311-311.5 NO GAP; ! linenum: 311.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.1-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; ! linenum: 312.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.1-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 312-312.1 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 312.100 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.1-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE comment_4: 0.1-LOWER PAIR APERTURES, USING comment_5: 0.009" PER STEP. ! linenum: 312.500 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH BACK TO TELEMETRY FORMAT AN ! linenum: 312.900 targname: NGC188-255 config: FOS/BL opmode: ACQ/PEAK aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 6S priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.1, param_4: SCAN-STEP-Y=0.1, req_1: ONBOARD ACQ FOR 312.95; ! linenum: 312.950 targname: NGC188-255 config: FOS/BL opmode: ACQ/PEAK aperture: 0.1-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 6S priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.03, param_4: SCAN-STEP-Y=0.03, req_1: ONBOARD ACQ FOR 313-316.5; ! linenum: 313.000 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH TO TELEMETRY FORMAT FN comment_2: LINE 313 PROVIDES 32K ENGINEERING DATA comment_3: FOR FGS ENCODER READINGS DURING SCAN comment_4: IN LINES 313.1-316.1. ! linenum: 313.100 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.25-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 313.1-313.5 NO GAP; ! linenum: 313.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.25-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; ! linenum: 314.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.25-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 314-314.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 314.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.25-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE comment_4: 0.25-UPPER APERTURE, USING comment_5: 0.019" PER STEP. ! linenum: 315.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.1-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 315-315.5 NO GAP; ! linenum: 315.500 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.1-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; ! linenum: 316.000 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.1-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 316-316.1 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 316.100 targname: NGC188-255 config: FOS/BL opmode: IMAGE aperture: 0.1-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE comment_4: 0.1-UPPER APERTURE, USING comment_5: 0.009" PER STEP. ! linenum: 316.500 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH BACK TO TELEMETRY FORMAT AN ! linenum: 401.000 targname: NGC188-255 config: FOS/RD opmode: ACQ/BINARY aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 1S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 401.2-401.3; req_2: AFTER 114.5 BY 14D; ! linenum: 401.200 targname: NGC188-255 config: FOS/RD opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 ! linenum: 401.300 targname: NGC188-255 config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 4S priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.12, param_4: SCAN-STEP-Y=0.12, req_1: ONBOARD ACQ FOR 401.4-408.9; ! linenum: 401.400 targname: NGC188-255 config: FOS/RD opmode: ACQ aperture: 4.3 sp_element: MIRROR num_exp: 1 time_per_exp: 64S priority: 1 ! linenum: 401.900 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH TO TELEMETRY FORMAT FN comment_2: LINE 401.9 PROVIDES 32K ENGINEERING comment_3: DATA FOR FGS ENCODER READINGS DURING comment_4: SCAN IN LINES 402-408.1. ! linenum: 402.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 402-402.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 402.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 403.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 403-403.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 403.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 1.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE 1.0 comment_4: APERTURE, USING 0.093" PER STEP. ! linenum: 404.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 404-404.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 404.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 405.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 405-405.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 405.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE 0.3 comment_4: APERTURE, USING 0.031" PER STEP. ! linenum: 406.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.25X2.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 406-406.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 406.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.25X2.0 sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. comment_3: THE PRECEDING IS A SEQUENCE TO comment_4: LOCATE THE WIDTH OF THE SLIT, comment_5: USING 0.025" PER STEP. ! linenum: 407.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 407-407.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 407.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. comment_3: THE PRECEDING IS A SEQUENCE TO comment_4: LOCATE THE WIDTH OF THE BAR, comment_5: USING 0.031" PER STEP. ! linenum: 408.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.7X2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 408-408.1 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 408.100 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.7X2.0-BAR sp_element: MIRROR num_exp: 1 time_per_exp: 5S fluxnum_1: 1 priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. comment_3: THE PRECEDING IS A SEQUENCE TO comment_4: LOCATE THE WIDTH OF THE BAR, comment_5: USING 0.031" PER STEP. ! linenum: 408.500 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH BACK TO TELEMETRY FORMAT AN ! linenum: 408.900 targname: NGC188-255 config: FOS/RD opmode: ACQ/PEAK aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 6S priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.1, param_4: SCAN-STEP-Y=0.1, req_1: ONBOARD ACQ FOR 408.95; ! linenum: 408.950 targname: NGC188-255 config: FOS/RD opmode: ACQ/PEAK aperture: 0.1-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 6S priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.03, param_4: SCAN-STEP-Y=0.03, req_1: ONBOARD ACQ FOR 409.0-412.9; ! linenum: 409.000 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH TO TELEMETRY FORMAT FN comment_2: LINE 409 PROVIDES 32K ENGINEERING DATA comment_3: FOR FGS ENCODER READINGS DURING SCAN comment_4: IN LINES 409.1-412.1. ! linenum: 409.100 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 409.1-409.5 NO GAP; ! linenum: 409.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; ! linenum: 410.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 410-410.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 410.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE comment_4: 0.25-LOWER PAIR APERTURES, USING comment_5: 0.019" PER STEP. ! linenum: 411.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.1-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 411-411.5 NO GAP; ! linenum: 411.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.1-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; ! linenum: 412.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.1-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 412-412.1 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 412.100 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.1-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE comment_4: 0.1-LOWER PAIR APERTURES, USING comment_5: 0.009" PER STEP. ! linenum: 412.500 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH BACK TO TELEMETRY FORMAT AN ! linenum: 412.900 targname: NGC188-255 config: FOS/RD opmode: ACQ/PEAK aperture: 0.25-PAIR-B sp_element: MIRROR num_exp: 1 time_per_exp: 6S priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.1, param_4: SCAN-STEP-Y=0.1, req_1: ONBOARD ACQ FOR 412.95; ! linenum: 412.950 targname: NGC188-255 config: FOS/RD opmode: ACQ/PEAK aperture: 0.1-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 6S priority: 1 param_1: SEARCH-SIZE-X=5, param_2: SEARCH-SIZE-Y=5, param_3: SCAN-STEP-X=0.03, param_4: SCAN-STEP-Y=0.03, req_1: ONBOARD ACQ FOR 413-416.5; ! linenum: 413.000 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH TO TELEMETRY FORMAT FN comment_2: LINE 413 PROVIDES 32K ENGINEERING DATA comment_3: FOR FGS ENCODER READINGS DURING SCAN comment_4: IN LINES 413.1-416.1. ! linenum: 413.100 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.25-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 413.1-413.5 NO GAP; ! linenum: 413.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.25-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; ! linenum: 414.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.25-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 414-414.5 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 414.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.25-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 5S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE comment_4: 0.25-UPPER APERTURE, USING comment_5: 0.019" PER STEP. ! linenum: 415.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.1-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 415-415.5 NO GAP; ! linenum: 415.500 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.1-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; ! linenum: 416.000 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.1-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; req_2: SEQ 416-416.1 NO GAP; comment_1: END POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. ! linenum: 416.100 targname: NGC188-255 config: FOS/RD opmode: IMAGE aperture: 0.1-PAIR-A sp_element: MIRROR num_exp: 1 time_per_exp: 12S priority: 1 param_1: Y-SIZE=1, param_2: SUB-STEP=4, param_3: COMB=YES, req_1: SPATIAL SCAN; comment_1: FIRST POINT IN SCAN SHOULD CENTER comment_2: IN THE APERTURE. THE PRECEDING IS A comment_3: SEQUENCE TO LOCATE THE comment_4: 0.1-UPPER APERTURE, USING comment_5: 0.009" PER STEP. ! linenum: 416.500 targname: DARK config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1M priority: 1 comment_1: SWITCH BACK TO TELEMETRY FORMAT AN ! ! end of exposure logsheet scan_data: line_list: 12.1,13.1 fgs_scan: cont_dwell: D dwell_pnts: 5 dwell_secs: 1.00 scan_width: 3.1000 scan_length: 3.1000 sides_angle: 90.0000 number_lines: 3 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 1.55 wid_offset: 1.55 ! line_list: 12.5,13.5 fgs_scan: cont_dwell: D dwell_pnts: 5 dwell_secs: 1.00 scan_width: 1.5500 scan_length: 3.1000 sides_angle: 90.0000 number_lines: 3 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 1.55 wid_offset: 0.755 ! line_list: 302,402 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.7500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.75 wid_offset: 0.0000 ! line_list: 302.5,402.5 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.7500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.00 wid_offset: 0.0000 ! line_list: 303,403 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.7500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 0.75 wid_offset: 0.0 ! line_list: 303.5,403.5 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.7500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0 ! line_list: 304,404 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.2500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.25 wid_offset: 0.0000 ! line_list: 304.5,404.5 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.2500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0000 ! line_list: 305,307,308,405,407,408 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.2500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 0.25 wid_offset: 0.0 ! line_list: 305.5,307.5,308.1,405.5,407.5,408.1 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.2500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0 ! line_list: 306,406 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.2000 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.2 wid_offset: 0.0000 ! line_list: 306.5,406.5 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.2000 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0000 ! line_list: 309.1,313.1,409.1,413.1 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.1500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.15 wid_offset: 0.0000 ! line_list: 309.5,313.5,409.5,413.5 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.1500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0000 ! line_list: 310,314,410,414 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.1500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 0.15 wid_offset: 0.0 ! line_list: 310.5,314.5,410.5,414.5 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.1500 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0 ! line_list: 311,315,411,415 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.0750 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.075 wid_offset: 0.0000 ! line_list: 311.5,315.5,411.5,415.5 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.0750 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0000 ! line_list: 312,316,412,416 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.0750 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 0.075 wid_offset: 0.0 ! line_list: 312.1,316.1,412.1,416.1 fgs_scan: cont_dwell: D dwell_pnts: 9 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.0750 sides_angle: 0.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 0.0 wid_offset: 0.0 ! ! end of scan data