!   $Id: 4802,v 4.1 1994/07/27 14:50:56 pepsa Exp $

coverpage:

  title_1:         SMOV FOS/BL INITIAL OPERATIONS
    sci_cat:       SMOV
    proposal_for:  SME/FOS
    pi_fname:      JOHN
    pi_mi:         E.
    pi_lname:      FITCH
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      410-338-4493
    keywords_1:    SMOV
    hours_par:     1.50
    fos:           Y
    pi_position:   FOS ENGINEER
! end of coverpage

abstract:

    line_1:        This proposal will be used to take a dark exposure
    line_2:        and a CAL lamp exposure to verify the science data
    line_3:        interfaces and the proper functioning of the FOS.
    line_4:        This must be preceeded by verification that the FOS
    line_5:        ION gauge pressure reading is less than 1E-5 Torr.
    line_6:        This activity must also be accomplished before any
    line_7:        other use of the HV with the FOS Blue detector.

!
! end of abstract

general_form_proposers:

  lname:           FITCH
    fname:         JOHN
    mi:            E.
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        Prior to the resumption of normal science activities with
    line_2:        the FOS it is necessary to verify that the electronic and
    line_3:        hardware within the instrument still function correctly.
    line_4:        This verification is best done by taking a short series of
    line_5:        internal images and comparing them to the FOS engineer's
    line_6:        expectations from pre-servicing mission operations.

!

  question:        3
    section:       1
    line_1:        Two internal exposures will be taken with the FOS/Blue
    line_2:        detector.  The dark image will determine if the detector
    line_3:        electronics worked correctly and the WAVE exposure will
    line_4:        verify that the FOS optical path is still intact.
    line_5:        As these images will include the first use of the FOS
    line_6:        high voltage after the shuttle portion of the servicing
    line_7:        mission, the data will be taken with real-time telemetry
    line_8:        to ensure that problems are detected immediately.

!

  question:        5
    section:       1
    line_1:        Both exposures require real-time telemetry throughout the
    line_2:        observation to ensure that problems are detected and
    line_3:        resolved quickly.  The order of the observations is important
    line_4:        as the DARK image verifies a subset of the functions that
    line_5:        are verified by the WAVE image.
    line_7:        Prerequisites:
    line_8:        The FOS must have successfully transitioned into the
    line_9:        HOLD configuration and the FOS internal pressure must
    line_10:       have been below 1E-5 torr for a minimum of 12 hours
    line_11:       as defined by the pressure monitoring activity
    line_12:       (proposal 4762) prior to the execution of this proposal.

!
!end of general form text

general_form_address:

  lname:           FITCH
    fname:         JOHN
    mi:            E.
    category:      PI
    inst:          STSCI
    addr_1:        SESD/ESB
    addr_2:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA
    phone:         410-338-4493

!
! end of general_form_address records

! No fixed target records found

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    targname:      DARK
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    param_1:       Y-SIZE=1
    req_1:         RT ANALYSIS;
    req_2:         SEQ 1-2 NO GAP;
    req_3:         CYCLE 3 / 1-2;

!

    linenum:       2.000
    targname:      WAVE
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      0.1-PAIR-B
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  480S
    priority:      1
    param_1:       Y-SIZE=1,
    param_2:       SUB-STEP=8,
    param_3:       COMB=YES
    req_1:         RT ANALYSIS;
    comment_1:     HIGH RESOLUTION FOR COMPARISON TO
    comment_2:     FOCUS TEST (4099)

!
! end of exposure logsheet

! No scan data records found