! $Id: 4780,v 4.1 1994/07/27 14:47:29 pepsa Exp $ coverpage: title_1: SMOV GHRS DETECTOR CALIBRATIONS proposal_for: SMC/HRS pi_fname: STEVE pi_lname: HULBERT pi_inst: STSCI pi_country: USA pi_phone: 301-338-4911 keywords_1: CALIBRATION, DETECTORS hours_par: 8.14 hrs: Y ! end of coverpage abstract: line_1: This proposal defines a standard set of detector tests line_2: generally run during the routine calibration program. line_3: They will be run as part of SMOV. ! ! end of abstract general_form_proposers: lname: HULBERT fname: STEVE inst: STSCI country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: The GHRS digicons require several internal calibrations line_2: to be performed periodically. The full set of calibrations line_3: will be run as part of SMOV to verify the internal stability line_4: of the SI. ! question: 3 section: 1 line_1: This test includes a complete photoscan map, a mask scan line_2: and a top/bottom scan. ! question: 5 section: 1 line_1: PREREQUISITE: line_2: The GHRS Detector 2 Initial Operations (proposal 4753). line_5: (This proposal should be completed before attempting any external line_6: target acquisitions. The first prop in timeline to use GHRS target line_7: acquisitions is the FOCAL PLANE ALIGNMENT CHECK - 4728.) ! question: 5 section: 2 line_1: Exposure times were specified based on measured count line_2: rates with the internal flat field lamps, and the line_3: requirement to obtain approximately 10000 counts per line_4: diode. There are no external targets, and no line_5: special pointing requirements. All of these observations line_6: could be scheduled as interleavers. None of the individual line_7: exposures exceeds 12 minutes. ! question: 7 section: 1 line_1: Standard reductions and output products will be produced. ! !end of general form text general_form_address: lname: HULBERT fname: STEVE category: PI inst: STSCI ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEF sequence_2: MSKSCN targname: INTFLAT config: HRS opmode: PHOTOSCAN aperture: NONE sp_element: # num_exp: 1 time_per_exp: 196S s_to_n: 60 priority: 1 param_1: TYPE=MASK, comment_1: USE GHRS DEFAULT OST ZMASKSCN comment_2: 28 LINES OF DATA ! linenum: 2.000 sequence_1: DEF sequence_2: PMAP targname: INTFLAT config: HRS opmode: PHOTOSCAN aperture: NONE sp_element: # num_exp: 1 time_per_exp: 231S s_to_n: 60 priority: 1 param_1: TYPE=LONG-Y, param_2: X=2048, param_3: Y=2096, param_4: SPACING=16, comment_1: USE GHRS DEFAULT OST ZLONGSCNY comment_2: INITIAL X=2048,Y=256,DELTAY=16 comment_3: 33 LINES OF DATA ! linenum: 3.000 sequence_1: DEF sequence_2: TOPBOTSCN targname: INTFLAT config: HRS opmode: PHOTOSCAN aperture: NONE sp_element: # num_exp: 1 time_per_exp: 231S s_to_n: 60 priority: 1 param_1: # comment_1: USE GHRS DEFAULT OST ZLONGSCNY comment_2: X=2048,DELTAY=1 ! linenum: 100.000 sequence_1: USE sequence_2: PMAP sp_element: SAFE2 time_per_exp: X3 req_1: CYCLE 4/100-301; req_2: GROUP 100-301 WITHIN 24 H; ! linenum: 200.000 sequence_1: USE sequence_2: MSKSCN sp_element: SAFE2 time_per_exp: X3 ! linenum: 300.000 sequence_1: USE sequence_2: TOPBOTSCN sp_element: SAFE2 time_per_exp: X3 param_1: TYPE=LONG-Y, param_2: X=2048, param_3: Y=253, param_4: SPACING=1, comment_1: INITIAL Y=138 IN ZLONGSCNY ! linenum: 301.000 sequence_1: USE sequence_2: TOPBOTSCN sp_element: SAFE2 time_per_exp: X3 param_1: TYPE=LONG-Y, param_2: X=2048, param_3: Y=3706, param_4: SPACING=1, comment_1: INITIAL Y=3591 IN ZLONGSCNY ! ! end of exposure logsheet ! No scan data records found