!  File:  4770C.PROP
!  Database:  PEPDB
!  Date:  23-FEB-1994:02:36:11

coverpage:

  title_1:         WF/PC CYCLE 2 CALIB: INTERNAL MONITOR PROPOSAL
    proposal_for:  CAL/WFC
    pi_title:      DR.
    pi_fname:      JOHN
    pi_mi:         W.
    pi_lname:      MACKENTY
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      (410) 338-4559
    keywords_1:    CALIBRATION
    wf_pc:         X
! end of coverpage

abstract:

    line_1:        This is a monitor proposal to regularly update the WFPC
    line_2:        standard data base of darks, biases, and preflashes.
    line_3:        It also checks for the onset of QEH using F439W.
    line_4:        Finally it takes KSPOTS in both cameras, which provides
    line_5:        a measure of mechanical stability on orbit.  The
    line_6:        proposal uses only internal targets and is intended
    line_7:        to run on a non-interference basis.  It should be run
    line_8:        every four weeks.

!
! end of abstract

general_form_proposers:

  lname:           MACKENTY
    fname:         JOHN
    mi:            W.
    inst:          STSCI
    country:       USA

!

  lname:           BAGGETT
    fname:         SYLVIA
    mi:            M
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        CYCLE 2 WF/PC INTERNAL MONITOR

!

  question:        3
    section:       1
    line_1:        This test takes various internal exposures in the WF and
    line_2:        PC, including darks, biases, preflashes, internal flats,
    line_3:        and KSPOTS.

!

  question:        4
    section:       1
    line_1:        Ongoing update of instrument calibration database, plus
    line_2:        monitoring of on-orbit instrument performance, including
    line_3:        photometric (QEH) and mechanical stability .

!

  question:        7
    section:       1
    line_1:        These data will be analyzed at the STScI.
    line_2:        They will also be part of the ScI calibration
    line_3:        data base and the results will be included in the WF/PC
    line_4:        Instrument Science Reports.

!
!end of general form text

general_form_address:

  lname:           MacKenty
    fname:         John
    mi:            W.
    title:         Dr.
    category:      PI
    inst:          STScI
    addr_1:        3700 San Martin Drive
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         (410) 338-4559

!

  lname:           Baggett
    fname:         Sylvia
    mi:            M.
    category:      CI
    inst:          STScI
    addr_1:        3700 San Martin Drive
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         (410) 338-5054

!
! end of general_form_address records

! No fixed target records found

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEF WFINT
    targname:      BIAS
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       PRE-FLASH=NO

!

    linenum:       2.000
    sequence_1:    DEF WFINT
    targname:      BIAS
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       PRE-FLASH=YES
    comment_1:     PREFLASH EXPOSURE.

!

    linenum:       3.000
    sequence_1:    DEF WFINT
    targname:      BIAS
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       PRE-FLASH=YES
    comment_1:     PREFLASH EXPOSURE.

!

    linenum:       4.000
    sequence_1:    DEF WFINT
    targname:      INTFLAT
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F439W
    num_exp:       1
    time_per_exp:  180S
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       CR-SPLIT=NO
    req_1:         SEQ 4-7 NON-INT;
    comment_2:     THIS 100S EXP USES 2EA 40S
    comment_3:     AND 1EA 20S LAMP OPER'S.
    comment_4:     TO MEASURE QEH. DO NOT ALTER.

!

    linenum:       5.000
    sequence_1:    DEF WFINT
    targname:      INTFLAT
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F439W
    num_exp:       1
    time_per_exp:  180S
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       CR-SPLIT=NO,
    comment_1:     START
    comment_2:     IMMED. AFTER PRECED. EXP.

!

    linenum:       6.000
    sequence_1:    DEF WFINT
    targname:      DARK
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  1500S
    priority:      1
    param_1:       PRE-FLASH=YES,
    param_2:       CR-SPLIT=NO,
    param_3:       CLOCKS=NO,
    comment_1:     WITH SERIALS OFF. START
    comment_2:     IMMED. AFTER PRECED. EXP.
    comment_3:     THIS IS PREFLASHED.

!

    linenum:       7.000
    sequence_1:    DEF WFINT
    targname:      INTFLAT
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F439W
    num_exp:       1
    time_per_exp:  180S
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       CR-SPLIT=NO
    comment_1:     START
    comment_2:     IMMED. AFTER PRECED. EXP.

!

    linenum:       10.000
    sequence_1:    DEF WFINT
    targname:      BIAS
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       PRE-FLASH=NO, PURGE=NO,
    req_1:         SEQ 10-10.1 NON-INT;
    comment_1:     NOT WITHIN 3 HOURS AFTER K-SPOT TEST.

!

    linenum:       10.100
    sequence_1:    DEF WFINT
    targname:      DARK
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  1500S
    priority:      1
    param_1:       PRE-FLASH=YES,
    param_2:       CR-SPLIT=NO,
    param_3:       CLOCKS=NO,
    comment_1:     WITH SERIALS OFF. THIS IS
    comment_2:     PREFLASHED.

!

    linenum:       11.000
    sequence_1:    DEF WFINT
    targname:      BIAS
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       PRE-FLASH=NO, PURGE=NO,
    req_1:         SEQ 11-11.1 NON-INT;
    comment_1:     NOT WITHIN 3 HOURS AFTER K-SPOT TEST.

!

    linenum:       11.100
    sequence_1:    DEF WFINT
    targname:      DARK
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  1500S
    priority:      1
    param_1:       PRE-FLASH=YES,
    param_2:       CR-SPLIT=NO,
    param_3:       CLOCKS=YES,
    comment_1:     WITH SERIALS ON. THIS IS
    comment_2:     PREFLASHED.

!

    linenum:       21.000
    sequence_1:    DEF PCINT
    targname:      BIAS
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       PRE-FLASH=NO
    comment_1:     START PARALLEL SEQUENCE
    comment_2:     FOR THE PC.

!

    linenum:       22.000
    sequence_1:    DEF PCINT
    targname:      BIAS
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       PRE-FLASH=YES
    comment_1:     PREFLASH EXPOSURE.

!

    linenum:       23.000
    sequence_1:    DEF PCINT
    targname:      BIAS
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       PRE-FLASH=YES
    comment_1:     PREFLASH EXPOSURE.

!

    linenum:       24.000
    sequence_1:    DEF PCINT
    targname:      INTFLAT
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F439W
    num_exp:       1
    time_per_exp:  450S
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       CR-SPLIT=NO
    req_1:         SEQ 24-27 NON-INT;
    comment_2:     THIS 360S EXP USES 9EA 40S
    comment_3:     LAMP OPER'S. LINES 24-27 TIMED
    comment_4:     TO MEASURE QEH. DO NOT ALTER.

!

    linenum:       25.000
    sequence_1:    DEF PCINT
    targname:      INTFLAT
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F439W
    num_exp:       1
    time_per_exp:  450S
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       CR-SPLIT=NO
    comment_1:     START
    comment_2:     IMMED. AFTER PRECED. EXP.

!

    linenum:       26.000
    sequence_1:    DEF PCINT
    targname:      DARK
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  1500S
    priority:      1
    param_1:       PRE-FLASH=YES,
    param_2:       CR-SPLIT=NO,
    param_3:       CLOCKS=NO,
    comment_1:     WITH SERIALS OFF. START
    comment_2:     IMMED. AFTER PRECED. EXP.
    comment_3:     THIS IS PREFLASHED.

!

    linenum:       27.000
    sequence_1:    DEF PCINT
    targname:      INTFLAT
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    F439W
    num_exp:       1
    time_per_exp:  450S
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       CR-SPLIT=NO
    comment_1:     START
    comment_2:     IMMED. AFTER PRECED. EXP.

!

    linenum:       30.000
    sequence_1:    DEF PCINT
    targname:      BIAS
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       PURGE=NO,
    req_1:         SEQ 30.0-30.1 NON-INT;
    comment_1:     NOT WITHIN 3 HOURS AFTER K-SPOT TEST.

!

    linenum:       30.100
    sequence_1:    DEF PCINT
    targname:      DARK
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  1500S
    priority:      1
    param_1:       PRE-FLASH=YES,
    param_2:       CR-SPLIT=NO,
    param_3:       CLOCKS=NO,
    comment_1:     WITH SERIALS OFF. THIS
    comment_2:     IS PREFLASHED.

!

    linenum:       31.000
    sequence_1:    DEF PCINT
    targname:      BIAS
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       PURGE=NO,
    req_1:         SEQ 31.0-31.1 NON-INT;
    comment_1:     NOT WITHIN 3 HOURS AFTER K-SPOT TEST.

!

    linenum:       31.100
    sequence_1:    DEF PCINT
    targname:      DARK
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  1500S
    priority:      1
    param_1:       PRE-FLASH=YES,
    param_2:       CR-SPLIT=NO,
    param_3:       CLOCKS=YES,
    comment_1:     WITH SERIALS ON. THIS
    comment_2:     IS PREFLASHED.

!

    linenum:       41.000
    sequence_1:    DEF SPOTS
    targname:      KSPOTS
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0.5S
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       PURGE=YES
    param_3:       CR-SPLIT=NO
    req_1:         SEQ 41.0-41.1 NO GAP

!

    linenum:       41.100
    sequence_1:    DEF SPOTS
    targname:      DARK
    config:        PC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  1200S
    priority:      1
    param_1:       PRE-FLASH=YES,
    param_2:       CR-SPLIT=NO,
    param_3:       CLOCKS=NO,
    comment_1:     WITH SERIALS OFF. THIS
    comment_2:     IS PREFLASHED.

!

    linenum:       42.000
    sequence_1:    DEF SPOTS
    targname:      KSPOTS
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  0.3S
    priority:      1
    param_1:       PRE-FLASH=NO,
    param_2:       PURGE=YES,
    param_3:       CR-SPLIT=NO
    req_1:         SEQ 42.0-42.1 NO GAP

!

    linenum:       42.100
    sequence_1:    DEF SPOTS
    targname:      DARK
    config:        WFC
    opmode:        IMAGE
    aperture:      ALL
    sp_element:    NONE
    num_exp:       1
    time_per_exp:  1200S
    priority:      1
    param_1:       PRE-FLASH=YES,
    param_2:       CR-SPLIT=NO,
    param_3:       CLOCKS=NO,
    comment_1:     WITH SERIALS OFF.
    comment_2:     THIS IS PREFLASHED.

!

    linenum:       100.000
    sequence_1:    USE
    sequence_2:    WFINT
    req_1:         CYCLE 2/100-103.195;
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       100.100
    sequence_1:    USE PCINT

!

    linenum:       100.110
    sequence_1:    USE SPOTS
    req_1:         SEQ 100-100.11 WITHIN 7D;

!

    linenum:       100.120
    sequence_1:    USE WFINT
    req_1:         AFTER 100 BY 28.5D +/- 0.5D

!

    linenum:       100.130
    sequence_1:    USE PCINT

!

    linenum:       100.140
    sequence_1:    USE SPOTS
    req_1:         SEQ 100.12-100.14 WITHIN 7D;

!

    linenum:       100.150
    sequence_1:    USE WFINT
    req_1:         AFTER 100 BY 56.5D +/- 0.5D

!

    linenum:       100.160
    sequence_1:    USE PCINT

!

    linenum:       100.170
    sequence_1:    USE SPOTS
    req_1:         SEQ 100.15-100.17 WITHIN 7D;

!

    linenum:       100.180
    sequence_1:    USE WFINT
    req_1:         AFTER 100 BY 84.5D +/- 0.5D

!

    linenum:       100.190
    sequence_1:    USE PCINT

!

    linenum:       100.191
    sequence_1:    USE SPOTS
    req_1:         SEQ 100.18-100.191 WITHIN 7D;

!

    linenum:       100.192
    sequence_1:    USE WFINT
    req_1:         AFTER 100 BY 112.5D +/- 0.5D

!

    linenum:       100.193
    sequence_1:    USE PCINT

!

    linenum:       100.194
    sequence_1:    USE SPOTS
    req_1:         SEQ 100.192-100.194 WITHIN 7D;

!

    linenum:       100.195
    sequence_1:    USE WFINT
    req_1:         AFTER 100 BY 140.5D +/- 0.5D

!

    linenum:       101.000
    sequence_1:    USE
    sequence_2:    PCINT
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.110
    sequence_1:    USE
    sequence_2:    SPOTS
    req_1:         SEQ 100.195-101.11 WITHIN 7D;
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.120
    sequence_1:    USE
    sequence_2:    WFINT
    req_1:         AFTER 100 BY 168.5D +/- 0.5D
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.130
    sequence_1:    USE
    sequence_2:    PCINT
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.220
    sequence_1:    USE
    sequence_2:    SPOTS
    req_1:         SEQ 101.12-101.22 WITHIN 7D;
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.230
    sequence_1:    USE
    sequence_2:    WFINT
    req_1:         AFTER 100 BY 196.5D +/- 0.5D
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.240
    sequence_1:    USE
    sequence_2:    PCINT
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.250
    sequence_1:    USE
    sequence_2:    SPOTS
    req_1:         SEQ 101.23-101.25 WITHIN 7D;
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.260
    sequence_1:    USE
    sequence_2:    WFINT
    req_1:         AFTER 100 BY 224.5D +/- 0.5D
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.270
    sequence_1:    USE
    sequence_2:    PCINT
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.280
    sequence_1:    USE
    sequence_2:    SPOTS
    req_1:         SEQ 101.26-101.28 WITHIN 7D;
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.281
    sequence_1:    USE
    sequence_2:    WFINT
    req_1:         AFTER 100 BY 252.5D +/- 0.5D
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.282
    sequence_1:    USE
    sequence_2:    PCINT
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.283
    sequence_1:    USE
    sequence_2:    SPOTS
    req_1:         SEQ 101.281-101.283 WITHIN 7D;
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.284
    sequence_1:    USE
    sequence_2:    WFINT
    req_1:         AFTER 100 BY 280.5D +/- 0.5D
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       101.285
    sequence_1:    USE
    sequence_2:    PCINT
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       102.000
    sequence_1:    USE
    sequence_2:    SPOTS
    req_1:         SEQ 101.284-102 WITHIN 7D;
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       102.100
    sequence_1:    USE
    sequence_2:    WFINT
    req_1:         AFTER 100 BY 308.5D +/- 0.5D
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       102.110
    sequence_1:    USE
    sequence_2:    PCINT
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       102.120
    sequence_1:    USE
    sequence_2:    SPOTS
    req_1:         SEQ 102.1-102.12 WITHIN 7D;
    comment_1:     RUN ONCE EVERY FOUR WEEKS ON A
    comment_2:     NON-INTERFERENCE BASIS.

!

    linenum:       102.130
    sequence_1:    USE WFINT
    req_1:         AFTER 100 BY 336.5D +/- 0.5D

!

    linenum:       102.140
    sequence_1:    USE PCINT

!

    linenum:       102.150
    sequence_1:    USE SPOTS
    req_1:         SEQ 102.13-102.15 WITHIN 7D;

!

    linenum:       102.160
    sequence_1:    USE WFINT
    req_1:         AFTER 100 BY 364.5D +/- 0.5D

!

    linenum:       102.170
    sequence_1:    USE PCINT

!

    linenum:       103.180
    sequence_1:    USE SPOTS
    req_1:         SEQ 102.16-103.18 WITHIN 7D;

!

    linenum:       103.190
    sequence_1:    USE WFINT
    req_1:         AFTER 100 BY 392.5D +/- 0.5D

!

    linenum:       103.191
    sequence_1:    USE PCINT

!

    linenum:       103.192
    sequence_1:    USE SPOTS
    req_1:         SEQ 103.19-103.192 WITHIN 7D;

!

    linenum:       103.193
    sequence_1:    USE WFINT
    req_1:         AFTER 100 BY 420.5D +/- 0.5D

!

    linenum:       103.194
    sequence_1:    USE PCINT

!

    linenum:       103.195
    sequence_1:    USE SPOTS
    req_1:         SEQ 103.193-103.195 WITHIN 7D;

!
! end of exposure logsheet

! No scan data records found