! $Id: 4754,v 4.1 1994/07/27 14:40:44 pepsa Exp $ coverpage: title_1: GHRS SMOV SIDE 2 ALIVENESS TEST proposal_for: SME/HRS pi_fname: JOE pi_lname: SKAPIK pi_inst: ST SCI pi_country: USA pi_phone: 410-338-4948 hours_par: 0.34 hrs: Y pi_position: GHRS INST ENG ! end of coverpage abstract: line_1: This activity will perform some basic tests on the GHRS line_2: side 2 components: Detector electronics, carrousel, line_3: digicon window heater, shutter, lamps, science data line_4: interface, test pulser, integration and reset capability. line_5: The resulting science and engineering data will be analyzed line_6: to verify the functioning of these components of the GHRS line_7: hardware. ! ! end of abstract general_form_proposers: lname: GILLILAND fname: RONALD mi: L. inst: ST SCI country: USA ! lname: SKAPIK fname: JOE inst: ST SCI country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: The GHRS will be configured to Low Voltage Engineering line_2: mode using normal reconfiguration commanding. The line_3: commanding for this activity will be issued by activating line_4: the ZMAMECH and ZMADATA RTS's. The instrument will be line_5: returned to HOLD mode using normal commanding. ! question: 5 section: 1 line_1: Prerequisite: GHRS in Hold Mode via proposal 4751. line_3: Engineering telemetry will be required to complete and line_4: analysis of the GHRS activities. This activity will line_5: demonstrate the functioning and configuration of the GHRS line_6: side 2 hardware. This activity does not operate the GHRS line_7: high voltage. line_8: This is an internal test and does not require any special line_9: pointing. ! !end of general form text general_form_address: lname: SKAPIK fname: JOE category: PI inst: ST SCI addr_1: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 20.000 targname: DARK config: HRS opmode: ENGINEERING sp_element: SAFE2 num_exp: 1 time_per_exp: 0M priority: 1 param_1: TYPE=ALIVE, HIGH-VOLTAGE=OFF req_1: CYCLE 3; req_2: RT ANALYSIS; comment_1: EXECUTE FOR SIDE 2: ZMAMECH, comment_2: ZMADATA. GATHER SCIENCE DATA comment_3: FOR ZMADATA. ! ! end of exposure logsheet ! No scan data records found