!   $Id: 4751,v 4.1 1994/07/27 14:39:59 pepsa Exp $

coverpage:

  title_1:         GHRS SMOV RECOVERY TO HOLD
    proposal_for:  SME/HRS
    pi_fname:      JOE
    pi_lname:      SKAPIK
    pi_inst:       ST SCI
    pi_country:    USA
    pi_phone:      410-338-4948
    hours_par:     0.25
    hrs:           Y
    pi_position:   GHRS INST ENG
! end of coverpage

abstract:

    line_1:        The GHRS will be recovered to the standard HOLD
    line_2:        configuration from the configuration at the end of the
    line_3:        shuttle activities by this activity.  Presently the GHRS
    line_4:        is to be left in the side 2 HOLD mode (with low voltage
    line_5:        turned on) at the end of the shuttle portion of the
    line_6:        servicing mission.  At this time the vac/ion gage and
    line_7:        one bank of the DEB's will be on.  This activity will
    line_8:        consist of configuring side 2 to Low Voltage Engineering
    line_9:        mode to reload and verify the detector 2 thresholds.
    line_10:       Normal reconfiguration back to HOLD mode will leave the
    line_11:       GHRS in standard HOLD.

!
! end of abstract

general_form_proposers:

  lname:           GILLILAND
    fname:         RONALD
    mi:            L.
    inst:          ST SCI
    country:       USA

!

  lname:           SODERBLOM
    fname:         DAVE
    inst:          ST SCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        The GHRS will be configured from Servicing Mission HOLD to
    line_2:        Low Voltage Engineering mode on side 2.  The detector 2
    line_3:        thresholds will be loaded then verified in telemetry.  The
    line_4:        instrument will be returned to standard HOLD using normal
    line_5:        reconfiguration commanding.

!

  question:        5
    section:       1
    line_1:        This activity must be the first activity for the GHRS
    line_2:        after the shuttle portion of the servicing mission.  It
    line_3:        should be scheduled to occur outside of the SAA.  HST
    line_4:        engineering telemetry must be available in realtime during
    line_5:        this activity so that telemetry pages may be snapped for
    line_7:        threshold verification.
    line_9:        This is an internal test and does not require any special
    line_10:       pointing.

!
!end of general form text

general_form_address:

  lname:           GILLILAND
    fname:         RONALD
    mi:            L
    category:      PI
    inst:          ST SCI
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA

!
! end of general_form_address records

! No fixed target records found

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       10.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  10M
    priority:      1
    req_1:         SEQ 10-20 NO GAP;
    req_2:         CYCLE 3/10-20;
    comment_1:     RECOVER GHRS FROM SAFE TO HOLD IF
    comment_2:     NECESSARY

!

    linenum:       20.000
    targname:      DARK
    config:        HRS
    opmode:        THRESHOLD
    sp_element:    SAFE2
    num_exp:       1
    time_per_exp:  15M
    priority:      1
    param_1:       FUNCTION=BOTH
    req_1:         RT ANALYSIS;
    comment_1:     LOAD AND EXECUTE ZMETHRES
    comment_2:     (LOAD AND VERIFY) SIDE 2
    comment_3:     AVOID SAA

!
! end of exposure logsheet

! No scan data records found