!   $Id: 4746,v 4.1 1994/07/27 14:38:34 pepsa Exp $

coverpage:

  title_1:         COSTAR/FOS COARSE ALIGNMENT
    proposal_for:  SMC/COS
    pi_title:      DR.
    pi_fname:      GEORGE
    pi_lname:      HARTIG
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      (410)338-4966
    keywords_1:    COSTAR, SMOV
    hours_pri:     0.80
    num_pri:       1
    fos:           Y
! end of coverpage

abstract:

    line_1:        The following activities will take place during this proposal.
    line_3:        1. Perform an on-board target acquisition.
    line_4:        2. Take a 4.3 arcsec aperture image using both the red and
    line_5:        blue detectors.

!
! end of abstract

general_form_proposers:

  lname:           TROELTZSCH
    fname:         JOHN
    mi:            R
    inst:          BALL AEROSPACE
    country:       USA

!

  lname:           HARTIG
    fname:         GEORGE
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           SCIENTIST
    fname:         FOS
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        This activity will satisfy the following COSTAR SMOV
    line_2:        Requirements:
    line_4:        1. Acquire FOS image data for use in refining the
    line_5:        COSTAR/FOS tilt and focus alignments. Acquire aperture
    line_6:        maps on both the red and blue channels.
    line_8:        2. Determine new FOS tilt and focus settings.

!

  question:        3
    section:       1
    line_1:        The observation sequence will start with an uplink to update the
    line_2:        COSTAR FOS mechanism positions 0-4 hours before the FOS data are obtained. An
    line_3:        on-board target acquisition will be performed to acquire the target into the
    line_4:        FOS 4.3 arcsec aperture. 4.3 arcsec aperture maps will be taken on both the red
    line_5:        and blue channels. The images will be analyzed for coma and image quality to
    line_6:        determine new FOS M1 focus and tilt positions.  The observation sequence
    line_7:        will be repeated twice per day for 6 times.

!

  question:        5
    section:       1
    line_1:        Prerequisites:
    line_2:        1. FOS-CAL-01 FOS/FGS Coarse Alignment (proposal 4907)
    line_8:        Real-time Requirements: Realtime contacts required for
    line_9:        COSTAR FOS mechanism position updates.

!

  question:        7
    section:       1
    line_1:        Science data will be analyzed using the COSTAR/FOS data analysis
    line_2:        system.  The following analysis will be performed:
    line_4:        1. Calculate the centroid and encircled energy for both images,
    line_5:        and generate contour plots.
    line_7:        2. Analyze the image shape and encircled energy to determine
    line_8:        the amount of coma and the focus quality.
    line_10:       3. Use the results of step 2 and the COSTAR opto-mechanical
    line_11:       model to determine new positions for FOS focus, X tilt,
    line_12:       and Y Tilt mechanisms.
    line_14:       Certain Data Base Updates:
    line_15:       None
    line_17:       Possible Data Base Updates:
    line_18:       None

!
!end of general form text

general_form_address:

  lname:           Hartig
    fname:         George
    category:      PI
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4966

!

  lname:           Troeltzsch
    fname:         John
    mi:            R
    category:      CON
    inst:          Ball Aerospace
    addr_1:        P. O. Box 1062
    city:          Boulder
    state:         CO
    zip:           80306
    country:       USA
    phone:         303 939-5781

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        NGC188-255
    name_2:        GSSS3788900057
    descr_1:       J,701,707
    pos_1:         RA=00H 44M 21.171S +/- 0.01S,
    pos_2:         DEC=+85D 26' 29.10" +/- 0.1",
    pos_3:         PLATE-ID=ZZZZ,
    equinox:       2000
    pm_or_par:     N
    pos_epoch_bj:  J
    comment_1:     PLATE ZZZZ IS PREFERRED. STANDARD
    comment_2:     GSC PLATE MAY BE USED IF ZZZZ
    comment_3:     CAUSES GUIDE STAR PROBLEMS.
    fluxnum_1:     1
    fluxval_1:     V = 13.42 +/- 0.1
    fluxnum_2:     2
    fluxval_2:     B = 13.61 +/- 0.1

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       0.500
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 0.5-3.1 NO GAP;
    req_3:         CYCLE 4 / 0.500-18.5;
    comment_1:     UPDATE ALL FOS MECH POSITIONS

!

    linenum:       1.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.1S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    req_1:         ONBOARD ACQ FOR 2.0;

!

    linenum:       2.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  256.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    comment_1:     PERFORM APERTURE MAP WITH FOS RED
    comment_2:     CHANNEL

!

    linenum:       3.000
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  768.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    comment_1:     PERFORM APERTURE MAP WITH FOS
    comment_2:     BLUE CHANNEL

!

    linenum:       3.100
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       3.500
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 3.5-6.1 NO GAP;
    req_3:         AFTER 3.1 BY 12H +/- 2H;
    comment_1:     UPDATE ALL FOS MECH POSITIONS

!

    linenum:       4.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.1S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    req_1:         ONBOARD ACQ FOR 5.0;

!

    linenum:       5.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  256.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    comment_1:     PERFORM APERTURE MAP WITH FOS RED
    comment_2:     CHANNEL

!

    linenum:       6.000
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  768.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    comment_1:     PERFORM APERTURE MAP WITH FOS
    comment_2:     BLUE CHANNEL

!

    linenum:       6.100
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       6.500
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 6.5-9.1 NO GAP;
    req_3:         AFTER 6.1 BY 12H +/- 2H;
    comment_1:     UPDATE ALL FOS MECH POSITIONS

!

    linenum:       7.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.1S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    req_1:         ONBOARD ACQ FOR 8.0;

!

    linenum:       8.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  256.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    comment_1:     PERFORM APERTURE MAP WITH FOS RED
    comment_2:     CHANNEL

!

    linenum:       9.000
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        ACQ
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  768.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    comment_1:     PERFORM APERTURE MAP WITH FOS
    comment_2:     BLUE CHANNEL

!

    linenum:       9.100
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       9.500
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 9.5-12.1 NO GAP;
    req_3:         AFTER 9.1 BY 12H +/-2H;
    comment_1:     UPDATE ALL FOS MECH POSITIONS

!

    linenum:       10.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.1S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    req_1:         ONBOARD ACQ FOR 11.0;

!

    linenum:       11.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  256.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       SUB-STEP = 8,
    param_2:       COMB = YES,
    param_3:       Y-SIZE = 64,
    param_4:       Y-SPACE = 8
    comment_1:     PERFORM APERTURE MAP WITH FOS RED
    comment_2:     CHANNEL

!

    linenum:       12.000
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  768.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       SUB-STEP = 8,
    param_2:       COMB = YES,
    param_3:       Y-SIZE = 64,
    param_4:       Y-SPACE = 8
    comment_1:     PERFORM APERTURE MAP WITH FOS
    comment_2:     BLUE CHANNEL

!

    linenum:       12.100
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       12.500
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 12.5-15.1 NO GAP;
    req_3:         AFTER 12.1 BY 12H +/- 2H;
    comment_1:     UPDATE ALL FOS MECH POSITIONS

!

    linenum:       13.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.1S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    req_1:         ONBOARD ACQ FOR 14.0;

!

    linenum:       14.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  256.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       SUB-STEP = 8,
    param_2:       COMB = YES,
    param_3:       Y-SIZE = 64,
    param_4:       Y-SPACE = 8
    comment_1:     PERFORM APERTURE MAP WITH FOS RED
    comment_2:     CHANNEL

!

    linenum:       15.000
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  768.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       SUB-STEP = 8,
    param_2:       COMB = YES,
    param_3:       Y-SIZE = 64,
    param_4:       Y-SPACE = 8
    comment_1:     PERFORM APERTURE MAP WITH FOS
    comment_2:     BLUE CHANNEL

!

    linenum:       15.100
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       15.500
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 15.5-18.1 NO GAP;
    req_3:         AFTER 15.1 BY 12H +/- 2H;
    comment_1:     UPDATE ALL FOS MECH POSITIONS

!

    linenum:       16.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.1S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    req_1:         ONBOARD ACQ FOR 17.0;

!

    linenum:       17.000
    targname:      NGC188-255
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  256.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       SUB-STEP = 8,
    param_2:       COMB = YES,
    param_3:       Y-SIZE = 64,
    param_4:       Y-SPACE = 8
    comment_1:     PERFORM APERTURE MAP WITH FOS RED
    comment_2:     CHANNEL

!

    linenum:       18.000
    targname:      NGC188-255
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  768.S
    fluxnum_1:     1
    fluxnum_2:     2
    priority:      1
    param_1:       SUB-STEP = 8,
    param_2:       COMB = YES,
    param_3:       Y-SIZE = 64,
    param_4:       Y-SPACE = 8
    comment_1:     PERFORM APERTURE MAP WITH FOS
    comment_2:     BLUE CHANNEL

!

    linenum:       18.100
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       18.500
    targname:      NONE
    config:        COSTAR
    opmode:        FOS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         AFTER 18.1 BY 12H +/- 2H;
    comment_1:     UPDATE ALL FOS MECH POSITIONS

!
! end of exposure logsheet

! No scan data records found