!   $Id: 4735,v 4.1 1994/07/27 14:37:02 pepsa Exp $

coverpage:

  title_1:         COSTAR/FOC PHASE RETRIEVAL
    proposal_for:  SMC/COS
    pi_title:      DR.
    pi_fname:      GEORGE
    pi_lname:      HARTIG
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      (410)338-4966
    keywords_1:    COSTAR, SMOV
    hours_pri:     2.90
    num_pri:       1
    foc:           Y
    realtime:      Y
! end of coverpage

abstract:

    line_1:        The DOB is moved to obtain out of focus FOC images for use
    line_2:        in phase retrieval.

!
! end of abstract

general_form_proposers:

  lname:           TROELTZSCH
    fname:         JOHN
    mi:            R
    inst:          BALL AEROSPACE
    country:       USA

!

  lname:           HARTIG
    fname:         GEORGE
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           JEDRZEJEWSKI
    fname:         ROBERT
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        This activity will satisfy the following COSTAR SMOV
    line_2:        Requirements:
    line_4:        1. Perform FOC phase retrieval scan. Take FOC images at
    line_5:        out of focus DOB positions
    line_7:        2. Determine new FOC optical alignment.

!

  question:        3
    section:       1
    line_1:        An interactive target execution will be executed to acquire the target into
    line_2:        the FOC F/96 aperture. Next, an FOC image will be taken with the DOB and FOC
    line_3:        tilt mechanisms at their current optimum positions. On the first execution of
    line_4:        each set, this best position and the event flag will have been set at the end
    line_5:        of the prerequisite alignment activities.  For each subsequent repeat in this
    line_6:        proposal, the positions will be set using the MOVES sequence.
    line_7:        FOC images will be obtained at both the +4mm and -4mm DOB positions. These
    line_8:        observations are repeated every 12 hours for total of 4 times after the coarse
    line_9:        alignment is complete (prop 4733) and again every 12 hours for total of 5
    line_10:       times after the fine alignment (prop 4734).

!

  question:        5
    section:       1
    line_1:        Prerequisites:
    line_2:        Lines 10-41 or 110-141 after
    line_3:        COSTAR/FOC Coarse Alignment with DOB and TILT updated (prop 4733)
    line_4:        Lines 210-251 or 310-351 after
    line_5:        COSTAR/FOC Fine Alignment with DOB and TILT updated (prop 4734)
    line_8:        Real-time Requirements:
    line_10:       1. Real-time command and telemetry links are required by the
    line_11:       OSS for the interactive target acquisition.
    line_13:       2. Real-time command and telemetry links are required by the
    line_14:       OSS to move the mechanisms to their best positions and set
    line_15:       event flags.

!

  question:        7
    section:       1
    line_1:        Engineering data will be reduced using the ESS and the COSTAR
    line_2:        data analysis system to generate standard sorts and plots.
    line_4:        Sorts and plots will be used to:
    line_5:        1. Verify DOB movements and performance
    line_6:        2. Verify COSTAR electrical performance
    line_8:        Science data will be analyzed using the COSTAR/FOC data analysis
    line_9:        system.  The following analysis will be performed:
    line_11:       1. Calculate the centroid and encircled energy for each image
    line_12:       and plot the results vs. DOB position.
    line_13:       2. Run phase retrieval on each image to determine the optical
    line_14:       aberrations (Zernike coefficients).
    line_15:       3. Use the results of steps 1 and 2 and the COSTAR
    line_16:       opto-mechanical model to determine new positions for
    line_17:       DOB and X and Y Tilt mechanisms.

!

  question:        7
    section:       2
    line_1:        Certain Data Base Updates:
    line_2:        1. None.
    line_4:        Possible Data Base Updates:
    line_5:        1. Update default SHP mirror positions in PDB table file.

!
!end of general form text

general_form_address:

  lname:           Hartig
    fname:         George
    category:      PI
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4966

!

  lname:           Jedrzejewski
    fname:         Robert
    category:      CON
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410-338-4817

!

  lname:           Troeltzsch
    fname:         John
    mi:            R
    inst:          Ball Aerospace
    addr_1:        P. O. Box 1062
    city:          Boulder
    state:         CO
    zip:           80306
    country:       USA
    phone:         303 939-5781

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        GRW70D5824
    descr_1:       J,703
    pos_1:         RA=13H 38M 51.0S +/- 0.1S,
    pos_2:         DEC=+70D 17' 08.5" +/- 1",
    pos_3:         PLATE-ID=0001
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V = 12.77 +/- 0.1

!

    targnum:       2
    name_1:        G93-48
    descr_1:       J,703
    pos_1:         RA=21H 52M 25.33S +/- 1S,
    pos_2:         DEC=+2D 23' 24.3" +/- 1",
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V = 12.74 +/- 0.1

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       1.000
    sequence_1:    DEFINE
    sequence_2:    FOCDATA
    targname:      #
    config:        FOC/96
    opmode:        ACQ
    aperture:      512X1024
    sp_element:    F486N,F2ND
    num_exp:       1
    time_per_exp:  10M
    priority:      1
    param_1:       PIXEL=50X25
    req_1:         INT ACQ FOR 2.0;
    req_2:         SEQ 2.0-6.5 NO GAP;

!

    linenum:       2.000
    sequence_1:    DEFINE
    sequence_2:    FOCDATA
    targname:      #
    config:        FOC/96
    opmode:        IMAGE
    aperture:      256X256
    sp_element:    F486N,F1ND
    num_exp:       1
    time_per_exp:  1000S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1

!

    linenum:       2.500
    sequence_1:    DEFINE
    sequence_2:    FOCDATA
    targname:      NONE
    config:        COSTAR
    opmode:        DOB
    num_exp:       1
    time_per_exp:  30M
    priority:      1
    req_1:         REQ UPLINK;
    comment_1:     DOB TO 0MM,SET EVENT FLAG 10 WHEN DONE

!

    linenum:       2.600
    sequence_1:    DEFINE
    sequence_2:    FOCDATA
    targname:      #
    config:        FOC/96
    opmode:        IMAGE
    aperture:      256X256
    sp_element:    F486N
    num_exp:       1
    time_per_exp:  1000S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1

!

    linenum:       3.000
    sequence_1:    DEFINE
    sequence_2:    FOCDATA
    targname:      NONE
    config:        COSTAR
    opmode:        DOB
    num_exp:       1
    time_per_exp:  0S
    priority:      1
    param_1:       FOCUS=+254,
    param_2:       EVENT-FLAG=YES
    comment_1:     MOVE COSTAR FOCUS TO +4 MM

!

    linenum:       4.000
    sequence_1:    DEFINE
    sequence_2:    FOCDATA
    targname:      #
    config:        FOC/96
    opmode:        IMAGE
    aperture:      256X256
    sp_element:    F486N
    num_exp:       1
    time_per_exp:  1000S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1

!

    linenum:       5.000
    sequence_1:    DEFINE
    sequence_2:    FOCDATA
    targname:      NONE
    config:        COSTAR
    opmode:        DOB
    num_exp:       1
    time_per_exp:  0.0S
    priority:      1
    param_1:       FOCUS=-221,
    param_2:       EVENT-FLAG=YES
    comment_1:     MOVE COSTAR FOCUS TO -4 MM

!

    linenum:       6.000
    sequence_1:    DEFINE
    sequence_2:    FOCDATA
    targname:      #
    config:        FOC/96
    opmode:        IMAGE
    aperture:      256X256
    sp_element:    F486N
    num_exp:       1
    time_per_exp:  1000S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1

!

    linenum:       6.500
    sequence_1:    DEFINE
    sequence_2:    FOCDATA
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       7.000
    sequence_1:    DEFINE
    sequence_2:    MOVES
    targname:      NONE
    config:        COSTAR
    opmode:        DOB
    num_exp:       1
    time_per_exp:  30M
    priority:      1
    req_1:         REQ UPLINK;
    comment_1:     OSS SIP TO MOVE DOB.

!

    linenum:       8.000
    sequence_1:    DEFINE
    sequence_2:    MOVES
    targname:      NONE
    config:        COSTAR
    opmode:        FOC
    num_exp:       1
    time_per_exp:  15M
    priority:      1
    req_1:         REQ UPLINK;
    comment_1:     OSS SIP TO SET FOC TILTS.

!

    linenum:       10.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      GRW70D5824
    req_1:         SELECT 1 OF 10-41 OR 110-141;
    req_2:         COND IF GRW70 AVAILABLE/10-41;
    req_3:         CYCLE 4/10-351;
    comment_1:     USE LINES 10-41 OR 110-141 AFTER
    comment_2:     4733 (COS/FOC CRS ALIGN) COMPLETE

!

    linenum:       11.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 10 BY 12H;

!

    linenum:       20.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      GRW70D5824
    req_1:         AFTER 11;

!

    linenum:       21.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 20 BY 12H;

!

    linenum:       30.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      GRW70D5824
    req_1:         AFTER 21;

!

    linenum:       31.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 30 BY 12H;

!

    linenum:       40.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      GRW70D5824
    req_1:         AFTER 31;

!

    linenum:       41.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 40 BY 12H;

!

    linenum:       110.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      G93-48
    req_1:         COND IF GRW70 NOT AVAILABLE/
    req_2:         110-141;

!

    linenum:       111.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 110 BY 12H;

!

    linenum:       120.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      G93-48
    req_1:         AFTER 111;

!

    linenum:       121.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 120 BY 12H;

!

    linenum:       130.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      G93-48
    req_1:         AFTER 121;

!

    linenum:       131.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 130 BY 12H;

!

    linenum:       140.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      G93-48
    req_1:         AFTER 131;

!

    linenum:       141.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 140 BY 12H;

!

    linenum:       210.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      GRW70D5824
    req_1:         SELECT 1 OF 210-251 OR 310-351;
    req_2:         COND IF GRW70 AVAILABLE/210-251;
    comment_1:     USE LINES 210-251 OR 310-351 AFTER
    comment_2:     4734 (COS/FOC FINE ALIGN) COMPLETE

!

    linenum:       211.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 210 BY 12H;

!

    linenum:       220.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      GRW70D5824
    req_1:         AFTER 211;

!

    linenum:       221.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 220 BY 12H;

!

    linenum:       230.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      GRW70D5824
    req_1:         AFTER 221;

!

    linenum:       231.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 230 BY 12H;

!

    linenum:       240.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      GRW70D5824
    req_1:         AFTER 231;

!

    linenum:       241.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 240 BY 12H;

!

    linenum:       250.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      GRW70D5824
    req_1:         AFTER 241;

!

    linenum:       251.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 250 BY 12H;

!

    linenum:       310.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      G93-48
    req_1:         COND IF GRW70 NOT AVAILABLE/
    req_2:         310-351;

!

    linenum:       311.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 310 BY 12H;

!

    linenum:       320.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      G93-48
    req_1:         AFTER 311;

!

    linenum:       321.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 320 BY 12H;

!

    linenum:       330.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      G93-48
    req_1:         AFTER 321;

!

    linenum:       331.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 330 BY 12H;

!

    linenum:       340.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      G93-48
    req_1:         AFTER 331;

!

    linenum:       341.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 340 BY 12H;

!

    linenum:       350.000
    sequence_1:    USE
    sequence_2:    FOCDATA
    targname:      G93-48
    req_1:         AFTER 341;

!

    linenum:       351.000
    sequence_1:    USE
    sequence_2:    MOVES
    req_1:         AFTER 350 BY 12H;

!
! end of exposure logsheet

! No scan data records found