! $Id: 4733,v 4.1 1994/07/27 14:35:54 pepsa Exp $ coverpage: title_1: COSTAR/FOC COARSE ALIGNMENT - FOCUS proposal_for: SMC/COS pi_title: DR. pi_fname: GEORGE pi_lname: HARTIG pi_inst: STSCI pi_country: USA pi_phone: (410)338-4966 keywords_1: COSTAR, SMOV hours_pri: 3.71 num_pri: 1 foc: Y realtime: Y ! end of coverpage abstract: line_1: The following activities will take place during this proposal. line_3: 1. Take an image at focus and tilt positions resulting from line_4: FOC-F96-CAL-01 (proposal 4931). line_5: 2. Move DOB to the 0.0 mm position using a real-time contact. line_6: 3. Perform and INT ACQ and Take an FOC image. line_7: 4. Move DOB to +4.0 mm and take an image. line_8: 5. Move DOB to +8.0 mm and take an image. line_9: 6. Move DOB to -8.0 mm and take an image. line_10: 7. Move DOB to -4.0 mm and take an image. line_11: 8. Move DOB to back to 0.0 mm and take an image. ! ! end of abstract general_form_proposers: lname: TROELTZSCH fname: JOHN mi: R inst: BALL AEROSPACE country: USA ! lname: HARTIG fname: GEORGE inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! lname: JEDRZEJEWSKI fname: ROBERT inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: This activity will satisfy the following COSTAR SMOV line_2: Requirements: line_4: 1. Perform FOC coarse focus scan. Take FOC images covering line_5: the DOB focus range. line_7: 2. Update FOC focus position to new best focus. ! question: 3 section: 1 line_1: An FOC image will be taken with the DOB and FOC tilt mechanisms at their new line_2: optimum positions as determined by the FOC F96/FGS Coarse Alignment test and line_3: uplinked prior to this test. OSS will then be used to move the DOB to the 0.0 mm line_4: position. There will be two real time contacts scheduled to complete this move. line_5: A COSTAR event flag will be set once the DOB reaches the 0.0 mm position to line_6: allow the next activity to proceed. An FOC interactive acquisition will be line_7: performed followed by an FOC image taken at the DOB 0.0 mm position. The COSTAR line_8: event flag used by OSS to signal successful completion of the move to 0.0 mm line_9: will then be checked, and if it is set the DOB will be moved to the +4.0 mm line_10: position. If the flag is not set the remainder of the DOB motions in this line_11: proposal will not execute. Following the move to +4.0 mm an FOC image will be line_12: taken. The DOB will then be moved to the +8.0 mm, -8.0 mm, and -4.0 mm line_13: positions with an FOC image begin taken at each DOB position. The DOB will then line_14: be commanded back to the 0.0 mm position and a last image taken. ! question: 5 section: 1 line_1: Prerequisites: line_2: 1. FOC F96/FGS Coarse Tilt Adjustment (proposal 5272) line_8: Real-time Requirements: line_9: 1. Real-time contact required at start of observations to move FOC mechanisms line_10: to best known position. line_11: 2. Real-time command and telemetry links are required by the OSS for the line_12: interactive target acquisition. line_13: 3. Real-time command and telemetry links are required by the line_14: OSS to move the DOB to the 0.0 mm position and set the line_15: event flag. line_17: Two contacts should be planned for the DOB move activity. line_18: This will allow additional attempts in case a contact is lost. ! question: 7 section: 1 line_1: Engineering data will be reduced using the ESS and the COSTAR line_2: data analysis system to generate standard sorts and plots. line_4: Sorts and plots will be used to: line_5: 1. Verify DOB movements and performance line_6: 2. Verify COSTAR electrical performance line_8: Science data will be analyzed using the COSTAR/FOC data analysis line_9: system. The following analysis will be performed: line_11: 1. Calculate the centroid and encircled energy for each image line_12: and plot the results vs. DOB position. line_13: 2. Run phase retrieval on the most out of focus image line_14: on either side of optimal focus to determine the optical line_15: aberrations (Zernike coefficients). line_16: 3. Use the results of steps 1 and 2 and the COSTAR line_17: opto-mechanical model to determine new positions for line_18: DOB and X and Y Tilt mechanisms. ! question: 7 section: 2 line_1: Certain Data Base Updates: line_2: 1. None. line_4: Possible Data Base Updates: line_5: 1. Update default SHP mirror positions in PDB table file. ! !end of general form text general_form_address: lname: Hartig fname: George category: PI inst: STSCI addr_1: 3700 San Martin Dr city: Baltimore state: MD zip: 21218 country: USA phone: 410 338-4966 ! lname: Troeltzsch fname: John mi: R category: CON inst: Ball Aerospace addr_1: P. O. Box 1062 city: Boulder state: CO zip: 80306 country: USA phone: 303 939-5781 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: GRW5824 descr_1: J,702,704 pos_1: RA=13H 38M 50.5S +/- 1.0", pos_2: DEC=+70D 17' 8.7" +/- 1.0" equinox: 2000 pm_or_par: N fluxnum_1: 1 fluxval_1: V = 12.77 +/- 0.1 ! targnum: 2 name_1: G93-48 descr_1: J,702,704 pos_1: RA=21H 52M 25.33S +/- 1.0", pos_2: DEC=+2D 23' 21.2" +/- 1.0" equinox: 2000 pm_or_par: N fluxnum_1: 1 fluxval_1: V = 12.74 +/- 0.1 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.500 targname: NONE config: COSTAR opmode: FOC num_exp: 1 time_per_exp: 30M priority: 1 req_1: REQ UPLINK; req_2: RT ANALYSIS; req_3: BEFORE 2 BY 2H +/- 2H; req_4: SELECT 1 OF 1.5-16 OR 101.5-116; req_5: COND IF GRW AVAIL/1.5-16; comment_1: MOVE ALL FOC MECHS TO BEST KNOWN POS. comment_2: PSTOL: KFOCFCS, KFOCXT, KFOCYT. ! linenum: 1.600 targname: GRW5824 config: FOC/96 opmode: ACQ aperture: 512X1024 sp_element: F486N,F2ND num_exp: 1 time_per_exp: 10.0M fluxnum_1: 1 priority: 1 param_1: PIXEL=50X25 req_1: INT ACQ FOR 2.0; req_2: SEQ 1.6-3.0 NO GAP; ! linenum: 2.000 targname: GRW5824 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N,F2ND num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 req_1: SEQ 2-3 NO GAP; req_2: CYCLE 4/1.5-16.0; comment_1: TOTAL EXPECTED COUNTS = 29/SEC comment_2: EXPECT ABOUT 5PCT IN CENTRAL PIXEL comment_3: IF ALIGNED OK ! linenum: 3.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 15M priority: 1 req_1: REQ UPLINK; comment_1: MOVE DOB TO 0.0MM, SET EVENT FLAG comment_2: WHEN SUCCESSFUL. comment_3: PSTOL: KFOCFCS, OSIEVENT. comment_4: COMMAND OPPORTUNITY 1. ! linenum: 4.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 15M priority: 1 req_1: REQ UPLINK; req_2: AFTER 3.0 BY 1.0H +/- 0.5H comment_1: CONTING MOVE DOB TO 0.0, SET EVENT FLG comment_2: WHEN SUCCESSFUL. comment_3: PSTOL: KFOCFCS, OSIEVENT. comment_4: COMMAND OPPORTUNITY 2. ! linenum: 5.000 targname: GRW5824 config: FOC/96 opmode: ACQ aperture: 512X1024 sp_element: F486N,F2ND num_exp: 1 time_per_exp: 10.0M fluxnum_1: 1 priority: 1 param_1: PIXEL=50X25 req_1: INT ACQ FOR 5.5; req_2: SEQ 4-15.5 NO GAP; ! linenum: 5.500 targname: GRW5824 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N,F2ND num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 29/SEC comment_2: EXPECT ABOUT 5PCT IN CENTRAL PIXEL comment_3: IF ALIGNED OK ! linenum: 6.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 0.0S priority: 1 param_1: FOCUS=+254, param_2: EVENT-FLAG=YES comment_1: MOVE DOB TO +4.0MM. 2ND FOCUS SCAN comment_2: POSITION. ! linenum: 7.000 targname: GRW5824 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N,F1ND num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 59/SEC comment_2: EXPECT ABOUT 0.3PCT/PIXEL PEAK comment_3: IF ALIGNED OK ! linenum: 8.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 0.0S priority: 1 param_1: FOCUS=+549, param_2: EVENT-FLAG=YES comment_1: MOVE DOB TO +8.0MM. 3RD FOCUS SCAN comment_2: POSITION. ! linenum: 9.000 targname: GRW5824 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 178/SEC comment_2: EXPECT ABOUT 0.11PCT/PIXEL PEAK comment_3: IF ALIGNED OK ! linenum: 10.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 0.0S priority: 1 param_1: FOCUS=-427, param_2: EVENT-FLAG=YES comment_1: MOVE DOB TO -8.0MM. 4TH FOCUS SCAN comment_2: POSITION. ! linenum: 11.000 targname: GRW5824 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 178/SEC comment_2: EXPECT ABOUT 0.11PCT/PIXEL PEAK comment_3: IF ALIGNED OK ! linenum: 12.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 0.0S priority: 1 param_1: FOCUS=-221, param_2: EVENT-FLAG=YES comment_1: MOVE DOB TO -4.0MM. 5TH FOCUS SCAN comment_2: POSITION. ! linenum: 13.000 targname: GRW5824 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N,F1ND num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 59/SEC comment_2: EXPECT ABOUT 0.3PCT/PIXEL PEAK comment_3: IF ALIGNED OK ! linenum: 14.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 0.0S priority: 1 param_1: FOCUS=0, param_2: EVENT-FLAG=YES comment_1: MOVE DOB BACK TO 0.0MM. comment_2: . ! linenum: 15.000 targname: GRW5824 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N,F2ND num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 29/SEC comment_2: EXPECT ABOUT 5PCT IN CENTRAL PIXEL comment_3: IF ALIGNED OK ! linenum: 15.500 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M priority: 1 req_1: RT ANALYSIS; comment_1: ATTACH INSTR = BDUMPSTR ! linenum: 16.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 15M priority: 1 req_1: REQ UPLINK; req_2: AFTER 15 BY 12H; comment_1: MOVE TO NEW BEST FOCUS. ! linenum: 101.500 targname: NONE config: COSTAR opmode: FOC num_exp: 1 time_per_exp: 30M priority: 1 req_1: REQ UPLINK; req_2: RT ANALYSIS; req_3: BEFORE 102 BY 2H +/- 2H; req_4: COND IF GRW NOT AVAIL/101.5-116; comment_1: MOVE ALL FOC MECHS TO BEST KNOWN POS. comment_2: PSTOL: KFOCFCS, KFOCXT, KFOCYT. ! linenum: 101.600 targname: G93-48 config: FOC/96 opmode: ACQ aperture: 512X1024 sp_element: F486N,F2ND num_exp: 1 time_per_exp: 10.0M fluxnum_1: 1 priority: 1 param_1: PIXEL=50X25 req_1: INT ACQ FOR 102; req_2: SEQ 101.6-103 NO GAP; ! linenum: 102.000 targname: G93-48 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N,F2ND num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 req_2: CYCLE 4/101.5-116.0; comment_1: TOTAL EXPECTED COUNTS = 27.7/SEC comment_2: EXPECT ABOUT 5PCT IN CENTRAL PIXEL comment_3: IF ALIGNED OK ! linenum: 103.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 15M priority: 1 req_1: REQ UPLINK; comment_1: MOVE DOB TO 0.0MM, SET EVENT FLAG comment_2: WHEN SUCCESSFUL. comment_3: PSTOL: KFOCFCS, OSIEVENT. comment_4: COMMAND OPPORTUNITY 1. ! linenum: 104.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 15M priority: 1 req_1: REQ UPLINK; req_2: AFTER 103.0 BY 1.0H +/- 0.5H comment_1: CONTING MOVE DOB TO 0.0, SET EVENT FLG comment_2: WHEN SUCCESSFUL. comment_3: PSTOL: KFOCFCS, OSIEVENT. comment_4: COMMAND OPPORTUNITY 2. ! linenum: 105.000 targname: G93-48 config: FOC/96 opmode: ACQ aperture: 512X1024 sp_element: F486N,F2ND num_exp: 1 time_per_exp: 10.0M fluxnum_1: 1 priority: 1 param_1: PIXEL=50X25 req_1: INT ACQ FOR 105.5; req_2: SEQ 104-115.5 NO GAP; ! linenum: 105.500 targname: G93-48 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N,F2ND num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 27.7/SEC comment_2: EXPECT ABOUT 5PCT IN CENTRAL PIXEL comment_3: IF ALIGNED OK ! linenum: 106.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 0.0S priority: 1 param_1: FOCUS=+254, param_2: EVENT-FLAG=YES comment_1: MOVE DOB TO +4.0MM. 2ND FOCUS SCAN comment_2: POSITION. ! linenum: 107.000 targname: G93-48 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N,F1ND num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 55/SEC comment_2: EXPECT ABOUT 0.3PCT/PIXEL PEAK comment_3: IF ALIGNED OK ! linenum: 108.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 0.0S priority: 1 param_1: FOCUS=+549, param_2: EVENT-FLAG=YES comment_1: MOVE DOB TO +8.0MM. 3RD FOCUS SCAN comment_2: POSITION. ! linenum: 109.000 targname: G93-48 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 167/SEC comment_2: EXPECT ABOUT 0.11PCT/PIXEL PEAK comment_3: IF ALIGNED OK ! linenum: 110.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 0.0S priority: 1 param_1: FOCUS=-427, param_2: EVENT-FLAG=YES comment_1: MOVE DOB TO -8.0MM. 4TH FOCUS SCAN comment_2: POSITION. ! linenum: 111.000 targname: G93-48 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 167/SEC comment_2: EXPECT ABOUT 0.11PCT/PIXEL PEAK comment_3: IF ALIGNED OK ! linenum: 112.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 0.0S priority: 1 param_1: FOCUS=-221, param_2: EVENT-FLAG=YES comment_1: MOVE DOB TO -4.0MM. 5TH FOCUS SCAN comment_2: POSITION. ! linenum: 113.000 targname: G93-48 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N,F1ND num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 55/SEC comment_2: EXPECT ABOUT 0.3PCT/PIXEL PEAK comment_3: IF ALIGNED OK ! linenum: 114.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 0.0S priority: 1 param_1: FOCUS=0, param_2: EVENT-FLAG=YES comment_1: MOVE DOB BACK TO 0.0MM. comment_2: . ! linenum: 115.000 targname: G93-48 config: FOC/96 opmode: IMAGE aperture: 512X512 sp_element: F486N,F2ND num_exp: 1 time_per_exp: 15.0M s_to_n: 20 fluxnum_1: 1 priority: 1 comment_1: TOTAL EXPECTED COUNTS = 27.7/SEC comment_2: EXPECT ABOUT 5PCT IN CENTRAL PIXEL comment_3: IF ALIGNED OK ! linenum: 115.500 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M priority: 1 req_1: RT ANALYSIS; comment_1: ATTACH INSTR = BDUMPSTR ! linenum: 116.000 targname: NONE config: COSTAR opmode: DOB num_exp: 1 time_per_exp: 15M priority: 1 req_1: REQ UPLINK; req_2: AFTER 115 BY 12H; comment_1: MOVE TO NEW BEST FOCUS POSITION. ! ! end of exposure logsheet ! No scan data records found