!   $Id: 4731,v 4.1 1994/07/27 14:34:30 pepsa Exp $

coverpage:

  title_1:         COSTAR/GHRS COARSE ALIGNMENT
    proposal_for:  SMC/COS
    pi_title:      DR.
    pi_fname:      GEORGE
    pi_lname:      HARTIG
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      (410)338-4966
    keywords_1:    COSTAR, SMOV
    hours_pri:     0.71
    num_pri:       1
    hrs:           Y
! end of coverpage

abstract:

    line_1:        The following activities will take place during this proposal.
    line_3:        1. Perform a N2 on-board target acquisition using return
    line_4:        to brightest point followed by an ACQ/PEAKUP.
    line_5:        2. Take an LSA image using N2.

!
! end of abstract

general_form_proposers:

  lname:           TROELTZSCH
    fname:         JOHN
    mi:            R
    inst:          BALL AEROSPACE
    country:       USA

!

  lname:           HARTIG
    fname:         GEORGE
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           GILLILAND
    fname:         RON
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        This activity will satisfy the following COSTAR SMOV
    line_2:        Requirements:
    line_4:        1. Acquire GHRS image data for use in refining the
    line_5:        COSTAR/GHRS tilt and focus alignments.
    line_7:        2. Determine new GHRS tilt and focus settings.

!

  question:        3
    section:       1
    line_1:        A 5x5 N2 on-board acquisition will be performed to center the
    line_2:        target in the LSA.  Return to brightest point will be used.
    line_3:        An ACQ/PEAKUP will be used to refine the centering.
    line_4:        Next a LSA image will be taken for use in determining
    line_5:        new GHRS tilt and focus settings. These observations will be
    line_6:        repeated every 12 hours for a total of 6 times.

!

  question:        5
    section:       1
    line_1:        Prerequisites:
    line_2:        1. GHRS-CAL-01 GHRS/FGS Coarse Alignment (prop 4891)
    line_8:        Real-time Requirements: Uplink opportunities for the derived
    line_9:        COSTAR GHRS mechanism positions.

!

  question:        7
    section:       1
    line_1:        Science data will be analyzed using the COSTAR/GHRS data analysis
    line_2:        system.  The following analysis will be performed:
    line_4:        1. Calculate the centroid and encircled energy for the image,
    line_5:        and generate contour plots.
    line_7:        2. Analyze the image shape and encircled energy to determine
    line_8:        the amount of coma and the focus quality.
    line_10:       3. Use the results of step 2 and the COSTAR opto-mechanical
    line_11:       model to determine new positions for GHRS focus, X tilt,
    line_12:       and Y Tilt mechanisms.
    line_14:       Certain Data Base Updates:
    line_15:       None
    line_17:       Possible Data Base Updates:
    line_18:       None

!
!end of general form text

general_form_address:

  lname:           Hartig
    fname:         George
    category:      PI
    inst:          STSCI
    addr_1:        3700 San Martin Dr
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4966

!

  lname:           Troeltzsch
    fname:         John
    mi:            R
    category:      CON
    inst:          Ball Aerospace
    addr_1:        P. O. Box 1062
    city:          Boulder
    state:         CO
    zip:           80306
    country:       USA
    phone:         303 939-5781

!

  lname:           Gilliland
    fname:         Ronald
    mi:            L
    category:      CON
    inst:          STSCI
    addr_1:        3700 San Martin Dr.
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         410 338-4454

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        AGK81D266
    name_2:        GSSS4547-1009
    descr_1:       J,702
    pos_1:         RA=09H 21M 19.06S +/- 0.02S,
    pos_2:         DEC=+81D 43' 28.6" +/- 0.2"
    equinox:       2000
    pm_or_par:     NO
    comment_1:     UV FLUX STANDARD
    fluxnum_1:     1
    fluxval_1:     V = 11.92 +/- 0.1
    fluxnum_2:     2
    fluxval_2:     B = 11.59 +/- 0.02

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       11.000
    targname:      NONE
    config:        COSTAR
    opmode:        GHRS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 11-15 NO GAP;
    req_3:         CYCLE 4/11-71;
    comment_1:     UPDATE ALL GHRS MECH POSITIONS

!

    linenum:       12.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  5.0S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       LOCATE=YES,
    req_1:         ONBOARD ACQ FOR 13.0;
    comment_1:     EXPECT ZFLUXM(0.2S)=28,500

!

    linenum:       13.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  20.4S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 14.0;
    comment_1:     STEP-TIME=0.2S

!

    linenum:       14.000
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=32,
    param_2:       NY=16,
    param_3:       DELTA-X=2,
    param_4:       DELTA-Y=4,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       14.500
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=16,
    param_2:       NY=32,
    param_3:       DELTA-X=4,
    param_4:       DELTA-Y=2,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       15.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       21.000
    targname:      NONE
    config:        COSTAR
    opmode:        GHRS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 21-25 NO GAP;
    req_3:         AFTER 15 BY 12H +/- 2H;
    comment_1:     UPDATE ALL GHRS MECH POSITIONS

!

    linenum:       22.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  5.0S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       LOCATE=YES,
    req_1:         ONBOARD ACQ FOR 23.0;
    comment_1:     EXPECT ZFLUXM(0.2S)=28,500

!

    linenum:       23.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  20.4S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 24.0;
    comment_1:     STEP-TIME=0.2S

!

    linenum:       24.000
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=32,
    param_2:       NY=16,
    param_3:       DELTA-X=2,
    param_4:       DELTA-Y=4,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       24.500
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=16,
    param_2:       NY=32,
    param_3:       DELTA-X=4,
    param_4:       DELTA-Y=2,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       25.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       31.000
    targname:      NONE
    config:        COSTAR
    opmode:        GHRS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 31-35 NO GAP;
    req_3:         AFTER 25 BY 12H +/- 2H;
    comment_1:     UPDATE ALL GHRS MECH POSITIONS

!

    linenum:       32.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  5.0S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       LOCATE=YES,
    req_1:         ONBOARD ACQ FOR 33.0;
    comment_1:     EXPECT ZFLUXM(0.2S)=28,500

!

    linenum:       33.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  20.4S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 34.0;
    comment_1:     STEP-TIME=0.2S

!

    linenum:       34.000
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=32,
    param_2:       NY=16,
    param_3:       DELTA-X=2,
    param_4:       DELTA-Y=4,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       34.500
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=16,
    param_2:       NY=32,
    param_3:       DELTA-X=4,
    param_4:       DELTA-Y=2,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       35.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       41.000
    targname:      NONE
    config:        COSTAR
    opmode:        GHRS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 41-45 NO GAP;
    req_3:         AFTER 35 BY 12H +/- 2H;
    comment_1:     UPDATE ALL GHRS MECH POSITIONS

!

    linenum:       42.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  5.0S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       LOCATE=YES,
    req_1:         ONBOARD ACQ FOR 43.0;
    comment_1:     EXPECT ZFLUXM(0.2S)=28,500

!

    linenum:       43.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  20.4S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 44.0;
    comment_1:     STEP-TIME=0.2S

!

    linenum:       44.000
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=32,
    param_2:       NY=16,
    param_3:       DELTA-X=1,
    param_4:       DELTA-Y=2,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       44.500
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=16,
    param_2:       NY=32,
    param_3:       DELTA-X=2,
    param_4:       DELTA-Y=1,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       45.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       51.000
    targname:      NONE
    config:        COSTAR
    opmode:        GHRS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 51-55 NO GAP;
    req_3:         AFTER 45 BY 12H +/- 2H;
    comment_1:     UPDATE ALL GHRS MECH POSITIONS

!

    linenum:       52.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  5.0S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       LOCATE=YES,
    req_1:         ONBOARD ACQ FOR 53.0;
    comment_1:     EXPECT ZFLUXM(0.2S)=28,500

!

    linenum:       53.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  20.4S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 54.0;
    comment_1:     STEP-TIME=0.2S

!

    linenum:       54.000
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=32,
    param_2:       NY=16,
    param_3:       DELTA-X=1,
    param_4:       DELTA-Y=2,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       54.500
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=16,
    param_2:       NY=32,
    param_3:       DELTA-X=2,
    param_4:       DELTA-Y=1,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       55.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       61.000
    targname:      NONE
    config:        COSTAR
    opmode:        GHRS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         SEQ 61-65 NO GAP;
    req_3:         AFTER 55 BY 12H +/- 2H;
    comment_1:     UPDATE ALL GHRS MECH POSITIONS

!

    linenum:       62.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  5.0S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       LOCATE=YES,
    req_1:         ONBOARD ACQ FOR 63.0;
    comment_1:     EXPECT ZFLUXM(0.2S)=28,500

!

    linenum:       63.000
    targname:      AGK81D266
    config:        HRS
    opmode:        ACQ/PEAKUP
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  20.4S
    s_to_n:        100
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 64.0;
    comment_1:     STEP-TIME=0.2S

!

    linenum:       64.000
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=32,
    param_2:       NY=16,
    param_3:       DELTA-X=1,
    param_4:       DELTA-Y=2,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       64.500
    targname:      AGK81D266
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  384S
    s_to_n:        150
    fluxnum_1:     1
    priority:      1
    param_1:       NX=16,
    param_2:       NY=32,
    param_3:       DELTA-X=2,
    param_4:       DELTA-Y=1,
    comment_1:     EXPECT MAX FOCUS DIODE RATE=52760.
    comment_2:     CORRECTED FOR DEADTIME=75,000.
    comment_3:     ASSUMES PEAK RESPONSE UP X3.0 W/COSTAR
    comment_4:     USED STEP-TIME=0.75S

!

    linenum:       65.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      NONE
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         RT ANALYSIS;
    comment_1:     ATTACH INSTR = BDUMPSTR

!

    linenum:       71.000
    targname:      NONE
    config:        COSTAR
    opmode:        GHRS
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         REQ UPLINK;
    req_2:         AFTER 65 BY 12H +/- 2H;
    comment_1:     UPDATE ALL GHRS MECH POSITIONS

!
! end of exposure logsheet

! No scan data records found