!   $Id: 4728,v 4.1 1994/07/27 14:33:55 pepsa Exp $

coverpage:

  title_1:         SMOV BASELINE FOCAL PLANE CHECK
    proposal_for:  SMC/OTA
    pi_title:      DR.
    pi_fname:      ROBERTO
    pi_lname:      GILMOZZI
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      301-338-4760
    wf_pc:         Y
    foc:           Y
    fos:           Y
    hrs:           Y
    pi_position:   SOB HEAD
! end of coverpage

abstract:

    line_1:        This test will be executed during the period after the
    line_2:        servicing mission and before the extension of the COSTAR
    line_3:        assembly. Its purpose is to verify that the
    line_4:        FOS, HRS, and FOC focal planes have not been altered by
    line_5:        the activities performed by Story and the Astronauts during the
    line_6:        servicing mission. A large unknown deviation in aperture position
    line_7:        would severly impact subsequent COSTAR alignment activities.
    line_8:        If this test reveals a deviation, we may be able to
    line_10:       compensate for any offsets prior to the complex and delicate
    line_11:       COSTAR alignment calibrations. This enhanced version of the
    line_12:       Heptathlon is designed to verify course alignments and measure
    line_13:       relative aperture positions to within a few arcsecs.
    line_14:       SPECIAL REQUIREMENTS:
    line_15:       ***This test uses pre-servicing parameters for HRS, FOS, and
    line_16:       FOC and the Cycle 4 parameters for WFPC2.***
    line_17:       ***This test requires special alignment and special guide stars.**
    line_18:       ***This test requires special commanding for telemetry setups.**

!
! end of abstract

general_form_proposers:

  lname:           GILMOZZI
    fname:         ROBERTO
    title:         DR.
    inst:          STSCI
    country:       USA
    esa:           Y

!

  lname:           LUPIE
    fname:         OLIVIA
    title:         DR.
    inst:          STSCI
    country:       USA

!

  lname:           NELAN
    fname:         EDMUND
    title:         DR.
    inst:          U. TEXAS
    country:       USA

!

  lname:           JEDRZEJEWSKI
    fname:         ROBERT
    title:         DR.
    inst:          STSCI
    country:       USA

!

  lname:           NOTA
    fname:         ANTONELLA
    title:         DR.
    inst:          STSCI
    country:       USA

!

  lname:           KEYES
    fname:         TONY
    title:         DR.
    inst:          STSCI
    country:       USA

!

  lname:           HULBERT
    fname:         STEVE
    title:         DR.
    inst:          STSCI
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        2
    section:       1
    line_1:        This test will be executed during the period after the
    line_2:        servicing mission and before the extension of the COSTAR
    line_3:        assembly. Its purpose is to verify that the
    line_4:        FOS, HRS, and FOC focal planes have not been altered by
    line_5:        the activities performed during the servicing mission.
    line_6:        A large unknown deviation in aperture position
    line_7:        would severly impact subsequent COSTAR alignment activities.
    line_8:        If this test reveals a deviation, we may be able to
    line_10:       compensate for any offsets prior to the complex and delicate
    line_11:       COSTAR alignment calibrations. This enhanced version of the
    line_12:       Heptathlon is designed to verify course alignments and measure
    line_13:       relative aperture positions to within a few arcsec.

!

  question:        3
    section:       1
    line_1:        TEST DESCRIPTION:
    line_2:        The basic test consists of 5 sequences: HRS, FOS RED, FOS BLUE,
    line_3:        FOC96, and FOC96-extension. The first four of these use
    line_4:        the M35 cluster. The standard Fall Heptathlon targets are used.
    line_5:        The FOC96-extension sequence is an additional
    line_6:        plate scale/orientation check using NGC 188.
    line_7:        The FOS and HRS onboard acquisitions scenarios are robust in that
    line_8:        they allow for several arcsec uncertainty in aperture positions.
    line_9:        The FOS acquisitions will be done in several phases.
    line_11:       A WFPC2 parallel image will gives us a coarse WFPC2 alignment
    line_12:       and WFPC2-to-SI relative alignment.
    line_13:       The HRS onboard acquisition procedure consists of a standard
    line_14:       acquisition followed by a verification image. Four additional
    line_15:       mosaics, each offset from the target will be taken to
    line_16:       increase the search size in the event that the aperture (or FGSs)
    line_17:       have moved considerably. The M35 portion of the FOC series
    line_18:       is a Mode III and parallel WFPC. The NGC188 sequence, from
    line_19:       which plate scale and instrument orientation will be verified,
    line_20:       consists of a cross step pattern (implemented using targets
    line_21:       with slight offsets.

!

  question:        3
    section:       2
    line_1:        SPECIAL PROCEDURES:
    line_2:        All M35 portions of the test must be obtained with the
    line_3:        same guide stars and at the same roll angle. This technique
    line_4:        will eliminate systematic errors and thus improve the accuracy
    line_5:        of the relative SI alignments. Only small angle maneuvers are
    line_6:        required to position each SI target into the aperture. We
    line_7:        identified GUIDE STAR candidates (which are cluster members) and
    line_8:        will work with SPSS in guide star selection.
    line_9:        We require FN telemetry during each SI sequence. We do not
    line_10:       need the 32 kb data during the entire series but only for
    line_11:       a few minutes during the verification images. See section 5 and 6.
    line_13:       CONDITIONAL REQUIREMENT:
    line_14:       Three versions of this test are incorporated in the
    line_15:       logsheet and differ by target: the fall (or -91 orientation),
    line_16:       and spring (+91 orientation) versions using M35 and
    line_17:       the version using NGC188. Three versions were included
    line_18:       to accommodate different outcome of the servicing mission.

!

  question:        4
    section:       1
    line_1:        This is an HST alignment diagnostic test and falls under the
    line_2:        category of Engineering/Observatory level test.

!

  question:        5
    section:       1
    line_1:        SPECIAL PROCEDURES: Non-standard commanding for telemetry
    line_2:        setups and special scheduling requirements/guide star selection.
    line_4:        1.  GUIDING REQUIREMENT:  Two Guide Star Fine Lock for all lines.
    line_5:        2.  GUIDE STAR SELECTION: The SAME guide star pair to be used for
    line_6:        lines 100-130, the same pair for lines 400-430.
    line_7:        Minimize the number of pairs used for lines 600-640.
    line_9:        GUIDE STARS  SELECTION:
    line_10:       USE FGS 3 AS DOMINANT. USE FGS 1 AS SUBDOMINANT.
    line_12:       3.  All SI-M35 sequences must be performed AT THE SAME ROLL
    line_13:       in order to minimize systematic roll errors.
    line_14:       4. 32K Engineering - needed for analysis. Needed for a few
    line_15:       minutes at the end of each the target acquisition sequences.
    line_16:       CONDITIONAL REQUIREMENT:
    line_17:       Three versions of this test are incorporated in the
    line_18:       logsheet and differ by target: the fall (or -91 orientation,
    line_19:       lines 100-260), and spring (+91 orientation, lines 400-453)
    line_20:       versions using M35 and the version using NGC188 (lines 600-
    line_21:       653). Three versions were included to accommodate different
    line_22:       outcomes of the servicing mission.

!

  question:        6
    section:       1
    line_1:        SEQUENCE NO-GAP scheduling because of stringent pointing
    line_2:        requirements, power constraints, and to maintain a steady
    line_3:        environment. SEQ NON-INT included where possible, to minimize
    line_4:        possibility of anomalous re-acquisitons.
    line_6:        The WFPC2 pickoff mirror adjustment (proposal 4265) must be
    line_7:        completed prior to this test. The adjustment will focus the star
    line_8:        image on the WFPC2 and thus facilitate the extraction of
    line_9:        accurate stellar positions.
    line_10:       This test is to be performed post-servicing and pre-COSTAR.
    line_11:       This implies that all SI initial post-servicing commissioning
    line_12:       proposals have been performed:
    line_13:       5077 FOC
    line_14:       5243 FOS
    line_15:       4757 HRS
    line_16:       4756 HRS
    line_17:       4265 WFPC2
    line_18:       5241 FGS

!

  question:        7
    section:       1
    line_1:        For the SI portion of the test, the data reduction will consist
    line_2:        of the following: From the WFC images, the roll angle and
    line_3:        absolute pointing on the sky will be calculated from the astrometic
    line_4:        stars in it's field of view. Each SI aperture addressed in the
    line_5:        test will be expressed in a WFC coordinate frame in arcsec. A global
    line_6:        solution for all SIs can be made because the same guide star
    line_7:        pair was used. Relative positions in this frame will be stored
    line_8:        for trending. Note that the FGS/SI alignment is not addressed in this
    line_9:        first analysis step. In the second analysis step, assumptions
    line_10:       about the FGS/FGS alignment will have to be made in order to
    line_11:       check the V2V3 calibration of the focal plane.
    line_13:       The OMS facility will be used to extract astrometry
    line_14:       and telemetry values, existing transformation programs and
    line_15:       spreadsheet storage will be used to store and analyze the
    line_16:       position data. Existing image processing facilities at the
    line_17:       STScI will be used to reduce the WFPC frames and perform
    line_18:       plate calibrations.

!

  question:        8
    section:       1
    line_1:        This is an alignment assessment test which will be
    line_2:        repeated as needed.

!

  question:        9
    section:       1
    line_1:        Previous HST data: Yes.

!

  question:        10
    section:       1
    line_1:        The resources at STScI will be used in support of this
    line_2:        observatory level procedure.

!
!end of general form text

general_form_address:

  lname:           Gilmozzi
    fname:         Roberto
    title:         Dr.
    category:      PI
    inst:          STScI
    addr_1:        3700 San MArtin Drive
    city:          Baltimore
    state:         MD
    zip:           21218
    country:       USA
    phone:         301-338-4760
    from_date:     01-JAN-88
    to_date:       01-JAN-96

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        F-HRS-1
    name_2:        GS1881-327
    descr_2:       C,707
    pos_1:         RA=06H 09M 9.1S +/- 0.1S,
    pos_2:         DEC=+24D 29' 22.1" +/- 1.0"
    equinox:       2000
    comment_1:     HRS STAR IN M35 FOR
    comment_2:     ORIENT -91.4
    fluxnum_1:     1
    fluxval_1:     V=11.01 +/-0.3

!

    targnum:       2
    name_1:        F-HRS-2
    name_2:        GS1881-327
    descr_2:       J,707
    pos_1:         RA-OFF=0.641S +/- 0.001S,
    pos_2:         DEC-OFF=8.75" +/- 0.01",
    pos_3:         FROM 1
    equinox:       2000
    comment_1:     HRS STAR IN M35 FOR
    comment_2:     ORIENT -91.4
    comment_3:     OFFSET=8.75"
    comment_4:     RA-OFF ASSUMES DEC=24.5D
    fluxnum_1:     1
    fluxval_1:     V=11.01 +/-0.3

!

    targnum:       3
    name_1:        F-HRS-3
    name_2:        GS1881-327
    descr_2:       J,707
    pos_1:         RA-OFF=0.641S +/- 0.001S,
    pos_2:         DEC-OFF=-8.75" +/- 0.01",
    pos_3:         FROM 1
    equinox:       2000
    comment_1:     HRS STAR IN M35 FOR
    comment_2:     ORIENT -91.4
    comment_3:     OFFSET=8.75"
    fluxnum_1:     1
    fluxval_1:     V=11.01 +/-0.3

!

    targnum:       4
    name_1:        F-HRS-4
    name_2:        GS1881-327
    descr_2:       J,707
    pos_1:         RA-OFF=-0.641S +/- 0.001S,
    pos_2:         DEC-OFF=-8.75" +/- 0.01",
    pos_3:         FROM 1
    equinox:       2000
    comment_1:     HRS STAR IN M35 FOR
    comment_2:     ORIENT -91.4
    comment_3:     OFFSET=8.75"
    fluxnum_1:     1
    fluxval_1:     V=11.01 +/-0.3

!

    targnum:       5
    name_1:        F-HRS-5
    name_2:        GS1881-327
    descr_2:       J,707
    pos_1:         RA-OFF=-0.641S +/- 0.001S,
    pos_2:         DEC-OFF=8.75" +/- 0.01",
    pos_3:         FROM 1
    equinox:       2000
    comment_1:     HRS STAR IN M35 FOR
    comment_2:     ORIENT -91.4
    comment_3:     OFFSET=8.75"
    fluxnum_1:     1
    fluxval_1:     V=11.01 +/-0.3

!

    targnum:       10
    name_1:        F-FOS
    name_2:        GS1881-222
    descr_2:       C,202
    pos_1:         RA=06H 09M 34.70S +/- 0.1S,
    pos_2:         DEC=+24D 28' 11.7" +/- 1.0"
    equinox:       2000
    comment_1:     FOS STAR IN M35 AT
    comment_2:     ORIENT -91.4
    fluxnum_1:     1
    fluxval_1:     V=13.17+/-0.3

!

    targnum:       20
    name_1:        F-FOC96
    name_2:        GS1877-494
    descr_2:       C,202
    pos_1:         RA=06H 09M 40.59S +/- 0.1S,
    pos_2:         DEC=+24D 19' 26.3" +/- 1.0"
    equinox:       2000
    comment_1:     FOC STAR IN M35 AT
    comment_2:     ORIENT -91.4.
    fluxnum_1:     1
    fluxval_1:     V=11.84 +/- 0.3

!

    targnum:       30
    name_1:        NGC188-AA
    descr_1:       J,701
    pos_1:         RA=00H 46M 51.542S +/- 0.01S,
    pos_2:         DEC=+85D 14' 33.93" +/- 1.0",
    pos_3:         PLATE-ID=ZZZZ
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V=14.5 +/- 1.0

!

    targnum:       31
    name_1:        NGC188-BB
    descr_1:       C,701
    pos_1:         RA = 00H 46M 59.584S +/- 0.01S,
    pos_2:         DEC = +85D 14' 33.93" +/- 1.0",
    pos_3:         PLATE-ID=ZZZZ
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V=14.5 +/- 1.0

!

    targnum:       32
    name_1:        NGC188-DD
    descr_1:       C,701
    pos_1:         RA = 00H 46M 51.542S +/- 0.01S,
    pos_2:         DEC = +85D 14' 23.93" +/- 1.0",
    pos_3:         PLATE-ID=ZZZZ
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V=14.5 +/- 1.0

!

    targnum:       33
    name_1:        NGC188-FF
    descr_1:       C,701
    pos_1:         RA = 00H 46M 43.500S +/- 0.01S,
    pos_2:         DEC = +85D 14' 33.93" +/- 1.0",
    pos_3:         PLATE-ID=ZZZZ
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V=14.5 +/- 1.0

!

    targnum:       34
    name_1:        NGC188-HH
    descr_1:       C,701
    pos_1:         RA = 00H 46M 51.542S +/-0.01S,
    pos_2:         DEC = +85D 14' 43.93" +/-1.0",
    pos_3:         PLATE-ID=ZZZZ
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V=14.5 +/- 1.0

!

    targnum:       101
    name_1:        S-HRS-1
    name_2:        GS1877-00176
    descr_2:       C,707
    pos_1:         RA=06H 08M 54.08S +/- 0.1S,
    pos_2:         DEC=+24D 15' 19.6" +/- 0.5"
    equinox:       2000
    comment_1:     HRS STAR IN M35 FOR
    comment_2:     ORIENT 90.13
    fluxnum_1:     1
    fluxval_1:     V=11.55 +/-0.3
    fluxnum_2:     2
    fluxval_2:     B-V=0.27+/-0.18
    fluxnum_3:     3
    fluxval_3:     E(B-V)=0.23+/-0.18

!

    targnum:       102
    name_1:        S-HRS-2
    name_2:        GS1877-00176
    descr_2:       C,707
    pos_1:         RA-OFF=0.641S +/- 0.001S,
    pos_2:         DEC-OFF=8.75" +/- 0.01",
    pos_3:         FROM 101
    equinox:       2000
    comment_1:     HRS STAR IN M35 FOR
    comment_2:     ORIENT 90.13
    comment_3:     OFFSET=8.75"
    comment_4:     RA-OFF ASSUMES DEC=24.5D
    fluxnum_1:     1
    fluxval_1:     V=11.55 +/-0.3

!

    targnum:       103
    name_1:        S-HRS-3
    name_2:        GS1877-00176
    descr_2:       C,707
    pos_1:         RA-OFF=0.641S +/- 0.001S,
    pos_2:         DEC-OFF=-8.75" +/- 0.01",
    pos_3:         FROM 101
    equinox:       2000
    comment_1:     HRS STAR IN M35 FOR
    comment_2:     ORIENT 90.13
    comment_3:     OFFSET=8.75"
    comment_4:     RA-OFF ASSUMES DEC=24.5D
    fluxnum_1:     1
    fluxval_1:     V=11.55 +/-0.3

!

    targnum:       104
    name_1:        S-HRS-4
    name_2:        GS1877-00176
    descr_2:       C,707
    pos_1:         RA-OFF=-0.641S +/- 0.001S,
    pos_2:         DEC-OFF=-8.75" +/- 0.01",
    pos_3:         FROM 101
    equinox:       2000
    comment_1:     HRS STAR IN M35 FOR
    comment_2:     ORIENT 90.13
    comment_3:     OFFSET=8.75"
    comment_4:     RA-OFF ASSUMES DEC=24.5D
    fluxnum_1:     1
    fluxval_1:     V=11.55 +/-0.3

!

    targnum:       105
    name_1:        S-HRS-5
    name_2:        GS1877-00176
    descr_2:       C,707
    pos_1:         RA-OFF=-0.641S +/- 0.001S,
    pos_2:         DEC-OFF=8.75" +/- 0.01",
    pos_3:         FROM 101
    equinox:       2000
    comment_1:     HRS STAR IN M35 FOR
    comment_2:     ORIENT 90.13
    comment_3:     OFFSET=8.75"
    comment_4:     RA-OFF ASSUMES DEC=24.5D
    fluxnum_1:     1
    fluxval_1:     V=11.55 +/-0.3

!

    targnum:       115
    name_1:        S-FOS
    name_2:        GS1877-01428
    descr_2:       C,707
    pos_1:         RA=06H 08M 34.12S +/- 0.1S,
    pos_2:         DEC=+24D 16' 39.94" +/- 1.0"
    equinox:       2000
    comment_1:     FOS STAR IN M35 FOR
    comment_2:     ORIENT 90.13
    fluxnum_1:     1
    fluxval_1:     V=12.93 +/-0.3

!

    targnum:       120
    name_1:        S-FOC96
    name_2:        GS1881-00180
    descr_2:       C,202
    pos_1:         RA=06H 08M 29.07S +/- 0.1S,
    pos_2:         DEC=+24D 24' 25.6" +/- 1.0"
    equinox:       2000
    comment_1:     FOC STAR IN M35 AT
    comment_2:     ORIENT 90.13
    fluxnum_1:     1
    fluxval_1:     V=12.39 +/- 0.3
    fluxnum_2:     2
    fluxval_2:     B-V=0.35+/- 0.18
    fluxnum_3:     3
    fluxval_3:     E(B-V)=0.23 +/- 0.18

!

    targnum:       201
    name_1:        N-HRS-1
    name_2:        GS4619-787
    descr_2:       C,707
    pos_1:         RA=00H 34M 29.0S +/- 0.1S,
    pos_2:         DEC=+85D 02' 49.0" +/- 1.0",
    pos_3:         PLATE-ID=ZZZZ
    equinox:       2000
    comment_1:     HRS STAR IN NGC188
    fluxnum_1:     1
    fluxval_1:     V=10.4 +/-0.3
    fluxnum_2:     2
    fluxval_2:     B-V=0.10 +/-0.1
    fluxnum_3:     3
    fluxval_3:     E(B-V)=0.0 +/-0.1

!

    targnum:       202
    name_1:        N-HRS-2
    name_2:        GS4619-787
    descr_2:       C,707
    pos_1:         RA-OFF=6.74S +/- 0.001S,
    pos_2:         DEC-OFF=8.75" +/- 0.01",
    pos_3:         FROM 201
    equinox:       2000
    comment_1:     HRS STAR IN NGC188
    comment_3:     OFFSET=8.75"
    comment_4:     RA-OFF ASSUMES DEC=85.03D
    fluxnum_1:     1
    fluxval_1:     V=10.4 +/-0.3

!

    targnum:       203
    name_1:        N-HRS-3
    name_2:        GS4619-787
    descr_2:       C,707
    pos_1:         RA-OFF=6.74S +/- 0.001S,
    pos_2:         DEC-OFF=-8.75" +/- 0.01",
    pos_3:         FROM 201
    equinox:       2000
    comment_1:     HRS STAR IN NGC188
    comment_3:     OFFSET=8.75"
    comment_4:     RA-OFF ASSUMES DEC=85.03D
    fluxnum_1:     1
    fluxval_1:     V=10.4 +/-0.3

!

    targnum:       204
    name_1:        N-HRS-4
    name_2:        GS4619-787
    descr_2:       C,707
    pos_1:         RA-OFF=-6.74S +/- 0.001S,
    pos_2:         DEC-OFF=-8.75" +/- 0.01",
    pos_3:         FROM 201
    equinox:       2000
    comment_1:     HRS STAR IN NGC188
    comment_3:     OFFSET=8.75"
    comment_4:     RA-OFF ASSUMES DEC=85.03D
    fluxnum_1:     1
    fluxval_1:     V=10.4 +/-0.3

!

    targnum:       205
    name_1:        N-HRS-5
    name_2:        GS4619-787
    descr_2:       C,707
    pos_1:         RA-OFF=-6.74S +/- 0.001S,
    pos_2:         DEC-OFF=8.75" +/- 0.01",
    pos_3:         FROM 201
    equinox:       2000
    comment_1:     HRS STAR IN NGC188
    comment_3:     OFFSET=8.75"
    comment_4:     RA-OFF ASSUMES DEC=85.03D
    fluxnum_1:     1
    fluxval_1:     V=10.4 +/-0.3

!

    targnum:       210
    name_1:        N-FOS
    name_2:        GS3788900057
    descr_1:       NGC188-255
    descr_2:       C,202
    pos_1:         RA=00H 44M 21.171S +/- 0.1S,
    pos_2:         DEC=+85D 26' 29.1" +/- 1.0",
    pos_3:         PLATE-ID=ZZZZ
    equinox:       2000
    comment_1:     FOS STAR IN NGC188
    fluxnum_1:     1
    fluxval_1:     V=13.42+/-0.1
    fluxnum_2:     2
    fluxval_2:     B=13.61+/-0.1

!
! end of fixed targets

! No solar system records found

generic_targets:

  targnum_1:       400
    name_1:        WFC2-CENTER
    descr_1:       C,202
    criteria_1:    RA=06H 09M 30.S,
    criteria_2:    DEC=+24D 24' 30.",
    criteria_3:    R=12'
    fluxnum_1:     1
    fluxval_1:     V=9.81+/-0.3

!

  targnum_1:       401
    name_1:        WFC2-NGCCEN
    descr_1:       C,202
    criteria_1:    RA=00H 44M 20.S,
    criteria_2:    DEC=+85D 25' 00.",
    criteria_3:    R=12'
    fluxnum_1:     1
    fluxval_1:     V=9.81+/-0.3

!
! end of generic targets

exposure_logsheet:

    linenum:       18.000
    sequence_1:    DEFINE
    sequence_2:    FOSRD
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         SEQ 18-20 NO GAP;
    req_2:         CYCLE 3 / 18-23
    comment_1:     SWITCH TO TELEMETRY FORMAT FN

!

    linenum:       19.000
    sequence_1:    DEFINE
    sequence_2:    FOSRD
    targname:      F-FOS
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  0.5S
    s_to_n:        45
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=3,
    param_2:       SEARCH-SIZE-Y=9,
    param_3:       SCAN-STEP-X=4.3,
    param_4:       SCAN-STEP-Y=1.4
    req_1:         ONBOARD ACQ FOR 20.0;
    comment_1:     SEARCH 12.9X12.9 ARCSEC AREA
    comment_2:     FOLLOW WITH NORMAL ACQ/BIN

!

    linenum:       20.000
    sequence_1:    DEFINE
    sequence_2:    FOSRD
    targname:      F-FOS
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.4S
    s_to_n:        17
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 22;
    req_2:         SEQ 20-22.1 NON-INT;

!

    linenum:       22.000
    sequence_1:    DEFINE
    sequence_2:    FOSRD
    targname:      F-FOS
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.0S
    s_to_n:        70
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=4,
    param_2:       SEARCH-SIZE-Y=4,
    param_3:       SCAN-STEP-X=0.1,
    param_4:       SCAN-STEP-Y=0.1
    req_1:         ONBOARD ACQ FOR 22.1;

!

    linenum:       22.100
    sequence_1:    DEFINE
    sequence_2:    FOSRD
    targname:      F-FOS
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  22S
    s_to_n:        32
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SPACE=12,
    param_2:       SUB-STEP=4,
    param_3:       Y-SIZE=48

!

    linenum:       23.000
    sequence_1:    DEFINE
    sequence_2:    FOSRD
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       28.000
    sequence_1:    DEFINE
    sequence_2:    FOSBL
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         SEQ 28-30 NO GAP;
    req_2:         CYCLE 3 / 28-33;
    comment_1:     SWITCH TO TELEMETRY FORMAT FN

!

    linenum:       29.000
    sequence_1:    DEFINE
    sequence_2:    FOSBL
    targname:      F-FOS
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.4S
    s_to_n:        70
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=3,
    param_2:       SEARCH-SIZE-Y=9,
    param_3:       SCAN-STEP-X=4.3,
    param_4:       SCAN-STEP-Y=1.4
    req_1:         ONBOARD ACQ FOR 30.0;
    comment_1:     SEARCH 12.9X12.9 ARCSEC AREA
    comment_2:     FOLLOW WITH NORMAL ACQ/BIN

!

    linenum:       30.000
    sequence_1:    DEFINE
    sequence_2:    FOSBL
    targname:      F-FOS
    config:        FOS/BL
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  4.0S
    s_to_n:        17
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 32;
    req_2:         SEQ 30-32.1 NON-INT;

!

    linenum:       32.000
    sequence_1:    DEFINE
    sequence_2:    FOSBL
    targname:      F-FOS
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  2.0S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=4,
    param_2:       SEARCH-SIZE-Y=4,
    param_3:       SCAN-STEP-X=0.1,
    param_4:       SCAN-STEP-Y=0.1
    req_1:         ONBOARD ACQ FOR 32.1;

!

    linenum:       32.100
    sequence_1:    DEFINE
    sequence_2:    FOSBL
    targname:      F-FOS
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  58S
    s_to_n:        30
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SPACE=12,
    param_2:       SUB-STEP=4,
    param_3:       Y-SIZE=48

!

    linenum:       33.000
    sequence_1:    DEFINE
    sequence_2:    FOSBL
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       39.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         SEQ 39-42 NON-INT;
    req_2:         SEQ 39-49 NO GAP;
    req_3:         CYCLE 3/39-49;
    comment_1:     SWITCH TO TELEMETRY FORMAT FN

!

    linenum:       40.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2
    targname:      F-HRS-1
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  61.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 42;

!

    linenum:       42.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2
    targname:      F-HRS-1
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  102.4S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    comment_1:     VERIFICATION MAP.

!

    linenum:       44.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2
    targname:      F-HRS-2
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  61.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 45;
    comment_1:     STEPTIME=0.4S

!

    linenum:       45.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2
    targname:      F-HRS-3
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  61.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 46;

!

    linenum:       46.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2
    targname:      F-HRS-4
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  61.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 47;

!

    linenum:       47.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2
    targname:      F-HRS-5
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  61.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 48.0;

!

    linenum:       48.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2
    targname:      F-HRS-1
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  51.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    comment_1:     VERIFICATION MAP.

!

    linenum:       49.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       59.000
    sequence_1:    DEFINE
    sequence_2:    FOC96
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         CYCLE 3/59-61;
    comment_1:     SWITCH TO TELEMETRY FORMAT FN

!

    linenum:       60.000
    sequence_1:    DEFINE
    sequence_2:    FOC96
    targname:      F-FOC96
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X1024
    sp_element:    F220W,F2ND
    num_exp:       1
    time_per_exp:  800S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       PIXEL=50X25

!

    linenum:       61.000
    sequence_1:    DEFINE
    sequence_2:    FOC96
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       70.000
    sequence_1:    DEFINE
    sequence_2:    FOC188
    targname:      INTFLAT
    config:        FOC/96
    opmode:        RESEAU
    aperture:      512X1024
    sp_element:    CLEAR
    num_exp:       1
    time_per_exp:  10M
    s_to_n:        5
    fluxnum_1:     1
    priority:      1
    param_1:       PIXEL=50X25,
    param_2:       LED=GREEN-2,
    param_3:       LED-STEP=20
    req_1:         SEQ 70-80 NO GAP;
    req_2:         CYCLE 3 / 70-80;

!

    linenum:       72.000
    sequence_1:    DEFINE
    sequence_2:    FOC188
    targname:      NGC188-AA
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X1024
    sp_element:    F430W,F4ND
    num_exp:       1
    time_per_exp:  10M
    s_to_n:        5
    fluxnum_1:     1
    priority:      1
    param_1:       PIXEL=50X25

!

    linenum:       73.000
    sequence_1:    DEFINE
    sequence_2:    FOC188
    targname:      NGC188-BB
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X1024
    sp_element:    F430W,F4ND
    num_exp:       1
    time_per_exp:  600S
    s_to_n:        5
    fluxnum_1:     1
    priority:      1
    param_1:       PIXEL=50X25

!

    linenum:       75.000
    sequence_1:    DEFINE
    sequence_2:    FOC188
    targname:      NGC188-DD
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X1024
    sp_element:    F430W,F4ND
    num_exp:       1
    time_per_exp:  600S
    s_to_n:        5
    fluxnum_1:     1
    priority:      1
    param_1:       PIXEL=50X25

!

    linenum:       77.000
    sequence_1:    DEFINE
    sequence_2:    FOC188
    targname:      NGC188-FF
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X1024
    sp_element:    F430W,F4ND
    num_exp:       1
    time_per_exp:  600S
    s_to_n:        5
    fluxnum_1:     1
    priority:      1
    param_1:       PIXEL=50X25

!

    linenum:       79.000
    sequence_1:    DEFINE
    sequence_2:    FOC188
    targname:      NGC188-HH
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X1024
    sp_element:    F430W,F4ND
    num_exp:       1
    time_per_exp:  600S
    s_to_n:        5
    fluxnum_1:     1
    priority:      1
    param_1:       PIXEL=50X25

!

    linenum:       80.000
    sequence_1:    DEFINE
    sequence_2:    FOC188
    targname:      INTFLAT
    config:        FOC/96
    opmode:        RESEAU
    aperture:      512X1024
    sp_element:    CLEAR
    num_exp:       1
    time_per_exp:  600S
    s_to_n:        5
    fluxnum_1:     1
    priority:      1
    param_1:       PIXEL=50X25,
    param_2:       LED=YELLOW-2,
    param_3:       LED-STEP=12

!

    linenum:       100.000
    sequence_1:    USE
    sequence_2:    FOSBL
    req_1:         ORIENT -91.4D +/- 0D
    req_2:         /100-130;SEQ
    req_3:         100-135 NO GAP;
    comment_1:     **SPECIFIC GUIDE STARS REQUIRED.**
    comment_2:     SAME GUIDE STAR PAIR FOR 100-130.
    comment_3:     EXACT SAME ROLL ANGLE FOR 100-130.

!

    linenum:       105.000
    sequence_1:    USE
    sequence_2:    FOSRD
    comment_1:     SPECIFIC GUIDE STARS REQUIRED.
    comment_2:     SAME GUIDE STAR PAIR FOR 100-130.
    comment_3:     EXACT SAME ROLL ANGLE FOR 100-130.

!

    linenum:       120.000
    sequence_1:    USE
    sequence_2:    HRSD2
    comment_2:     SAME GUIDE STAR PAIR FOR 100-130.
    comment_3:     EXACT SAME ROLL ANGLE FOR 100-130.

!

    linenum:       130.000
    sequence_1:    USE
    sequence_2:    FOC96
    comment_2:     SAME GUIDE STAR PAIR FOR 100-130.
    comment_3:     EXACT SAME ROLL ANGLE FOR 100-130.

!

    linenum:       135.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      V1
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         CYCLE 3;
    req_2:         RT-ANALYSIS;
    comment_1:     DUMP ENG TAPE RECORDER (BTAPEDUMP)

!

    linenum:       140.000
    sequence_1:    USE
    sequence_2:    FOC188
    req_1:         SEQ 140-145 NO GAP;
    comment_1:     TO BE SCHEDULED ACCORDING TO SMOV
    comment_2:     REQUIREMENTS. (GROUP WITHIN DAYS).

!

    linenum:       145.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      V1
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         CYCLE 3;
    req_2:         RT-ANALYSIS;
    comment_1:     DUMP ENG TAPE RECORDER (BTAPEDUMP)

!

    linenum:       222.100
    targname:      WFC2-CENTER
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  1.0S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 22.1

!

    linenum:       232.100
    targname:      WFC2-CENTER
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  50S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 32.1

!

    linenum:       242.000
    targname:      WFC2-CENTER
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  1.0S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 42.

!

    linenum:       260.000
    targname:      WFC2-CENTER
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  10.0S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 60

!

    linenum:       280.000
    sequence_1:    DEFINE
    sequence_2:    FOSRDS
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         SEQ 280-323 NO GAP;
    req_2:         CYCLE 3 / 280-323
    comment_1:     SWITCH TO TELEMETRY FORMAT FN

!

    linenum:       300.000
    sequence_1:    DEFINE
    sequence_2:    FOSRDS
    targname:      S-FOS
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.0S
    s_to_n:        45
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=3,
    param_2:       SEARCH-SIZE-Y=9,
    param_3:       SCAN-STEP-X=4.3,
    param_4:       SCAN-STEP-Y=1.4
    req_1:         ONBOARD ACQ FOR 320.0;
    comment_1:     SEARCH 12.9X12.9 ARCSEC AREA
    comment_2:     FOLLOW WITH NORMAL ACQ/BIN

!

    linenum:       320.000
    sequence_1:    DEFINE
    sequence_2:    FOSRDS
    targname:      S-FOS
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  0.9S
    s_to_n:        17
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 322;
    req_2:         SEQ 320-322.1 NON-INT;

!

    linenum:       322.000
    sequence_1:    DEFINE
    sequence_2:    FOSRDS
    targname:      S-FOS
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  4.0S
    s_to_n:        70
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=4,
    param_2:       SEARCH-SIZE-Y=4,
    param_3:       SCAN-STEP-X=0.1,
    param_4:       SCAN-STEP-Y=0.1
    req_1:         ONBOARD ACQ FOR 322.1;

!

    linenum:       322.100
    sequence_1:    DEFINE
    sequence_2:    FOSRDS
    targname:      S-FOS
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  22S
    s_to_n:        32
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SPACE=12,
    param_2:       SUB-STEP=4,
    param_3:       Y-SIZE=48

!

    linenum:       323.000
    sequence_1:    DEFINE
    sequence_2:    FOSRDS
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       328.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLS
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         SEQ 328-333 NO GAP;
    req_2:         CYCLE 3 / 328-333;
    comment_1:     SWITCH TO TELEMETRY FORMAT FN

!

    linenum:       329.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLS
    targname:      S-FOS
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  3.0S
    s_to_n:        70
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=3,
    param_2:       SEARCH-SIZE-Y=9,
    param_3:       SCAN-STEP-X=4.3,
    param_4:       SCAN-STEP-Y=1.4
    req_1:         ONBOARD ACQ FOR 330.0;
    comment_1:     SEARCH 12.9X12.9 ARCSEC AREA
    comment_2:     FOLLOW WITH NORMAL ACQ/BIN

!

    linenum:       330.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLS
    targname:      S-FOS
    config:        FOS/BL
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  3.1S
    s_to_n:        17
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 332;
    req_2:         SEQ 330-332.1 NON-INT;

!

    linenum:       332.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLS
    targname:      S-FOS
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  6.0S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=4,
    param_2:       SEARCH-SIZE-Y=4,
    param_3:       SCAN-STEP-X=0.1,
    param_4:       SCAN-STEP-Y=0.1
    req_1:         ONBOARD ACQ FOR 332.1;

!

    linenum:       332.100
    sequence_1:    DEFINE
    sequence_2:    FOSBLS
    targname:      S-FOS
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  54S
    s_to_n:        30
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SPACE=12,
    param_2:       SUB-STEP=4,
    param_3:       Y-SIZE=48

!

    linenum:       333.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLS
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       339.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2S
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         SEQ 339-342 NON-INT;
    req_2:         SEQ 339-349 NO GAP;
    req_3:         CYCLE 3/339-349;
    comment_1:     SWITCH TO TELEMETRY FORMAT FN

!

    linenum:       340.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2S
    targname:      S-HRS-1
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  61.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 342;

!

    linenum:       342.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2S
    targname:      S-HRS-1
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  102.4S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    comment_1:     VERIFICATION MAP.

!

    linenum:       344.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2S
    targname:      S-HRS-2
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  61.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 345;
    comment_1:     STEPTIME=0.4S

!

    linenum:       345.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2S
    targname:      S-HRS-3
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  61.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 346;

!

    linenum:       346.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2S
    targname:      S-HRS-4
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  61.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 347;

!

    linenum:       347.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2S
    targname:      S-HRS-5
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  61.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 348.0;

!

    linenum:       348.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2S
    targname:      S-HRS-1
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  51.2S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    comment_1:     VERIFICATION MAP.

!

    linenum:       349.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2S
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       359.000
    sequence_1:    DEFINE
    sequence_2:    FOC96S
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         CYCLE 3/359-361;
    comment_1:     SWITCH TO TELEMETRY FORMAT FN

!

    linenum:       360.000
    sequence_1:    DEFINE
    sequence_2:    FOC96S
    targname:      S-FOC96
    config:        FOC/96
    opmode:        IMAGE
    aperture:      512X1024
    sp_element:    F220W,F2ND
    num_exp:       1
    time_per_exp:  600S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       PIXEL=50X25

!

    linenum:       361.000
    sequence_1:    DEFINE
    sequence_2:    FOC96S
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       400.000
    sequence_1:    USE
    sequence_2:    FOSBLS
    req_1:         ORIENT 90.13D +/- 0D
    req_2:         /400-430;
    req_3:         SEQ 400-435 NO GAP;
    comment_1:     **SPECIFIC GUIDE STARS REQUIRED.**
    comment_2:     SAME GUIDE STAR PAIR FOR 400-430.
    comment_3:     EXACT SAME ROLL ANGLE FOR 400-430.

!

    linenum:       405.000
    sequence_1:    USE
    sequence_2:    FOSRDS
    comment_1:     SPECIFIC GUIDE STARS REQUIRED.
    comment_2:     SAME GUIDE STAR PAIR FOR 400-430.
    comment_3:     EXACT SAME ROLL ANGLE FOR 400-430.

!

    linenum:       420.000
    sequence_1:    USE
    sequence_2:    HRSD2S
    comment_2:     SAME GUIDE STAR PAIR FOR 400-430.
    comment_3:     EXACT SAME ROLL ANGLE FOR 400-430.

!

    linenum:       430.000
    sequence_1:    USE
    sequence_2:    FOC96S
    comment_2:     SAME GUIDE STAR PAIR FOR 400-430.
    comment_3:     EXACT SAME ROLL ANGLE FOR 400-430.

!

    linenum:       435.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      V1
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         CYCLE 3;
    req_2:         RT-ANALYSIS;
    comment_1:     DUMP ENG TAPE RECORDER (BTAPEDUMP)

!

    linenum:       440.000
    sequence_1:    USE
    sequence_2:    FOC188
    req_1:         SEQ 440-445 NO GAP;
    comment_1:     TO BE SCHEDULED ACCORDING TO SMOV
    comment_2:     REQUIREMENTS. (GROUP WITHIN DAYS).

!

    linenum:       445.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      V1
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         CYCLE 3;
    req_2:         RT-ANALYSIS;
    comment_1:     DUMP ENG TAPE RECORDER (BTAPEDUMP)

!

    linenum:       450.000
    targname:      WFC2-CENTER
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  1.0S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 322.1

!

    linenum:       451.000
    targname:      WFC2-CENTER
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  50S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 332.1

!

    linenum:       452.000
    targname:      WFC2-CENTER
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  1.0S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 342.

!

    linenum:       453.000
    targname:      WFC2-CENTER
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  10.0S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 360

!

    linenum:       518.000
    sequence_1:    DEFINE
    sequence_2:    FOSRDN
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         SEQ 518-520 NO GAP;
    req_2:         CYCLE 3 / 518-523
    comment_1:     SWITCH TO TELEMETRY FORMAT FN

!

    linenum:       519.000
    sequence_1:    DEFINE
    sequence_2:    FOSRDN
    targname:      N-FOS
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.0S
    s_to_n:        45
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=3,
    param_2:       SEARCH-SIZE-Y=9,
    param_3:       SCAN-STEP-X=4.3,
    param_4:       SCAN-STEP-Y=1.4
    req_1:         ONBOARD ACQ FOR 520.0;
    comment_1:     SEARCH 12.9X12.9 ARCSEC AREA
    comment_2:     FOLLOW WITH NORMAL ACQ/BIN

!

    linenum:       520.000
    sequence_1:    DEFINE
    sequence_2:    FOSRDN
    targname:      N-FOS
    config:        FOS/RD
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  1.2S
    s_to_n:        17
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 522;
    req_2:         SEQ 520-522.1 NON-INT;

!

    linenum:       522.000
    sequence_1:    DEFINE
    sequence_2:    FOSRDN
    targname:      N-FOS
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  4.0S
    s_to_n:        70
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=4,
    param_2:       SEARCH-SIZE-Y=4,
    param_3:       SCAN-STEP-X=0.1,
    param_4:       SCAN-STEP-Y=0.1
    req_1:         ONBOARD ACQ FOR 522.1;

!

    linenum:       522.100
    sequence_1:    DEFINE
    sequence_2:    FOSRDN
    targname:      N-FOS
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  21S
    s_to_n:        32
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SPACE=12,
    param_2:       SUB-STEP=4,
    param_3:       Y-SIZE=48

!

    linenum:       523.000
    sequence_1:    DEFINE
    sequence_2:    FOSRDN
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       528.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLN
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         SEQ 528-530 NO GAP;
    req_2:         CYCLE 3 / 528-533;
    comment_1:     SWITCH TO TELEMETRY FORMAT FN

!

    linenum:       529.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLN
    targname:      N-FOS
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  3.0S
    s_to_n:        70
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=3,
    param_2:       SEARCH-SIZE-Y=9,
    param_3:       SCAN-STEP-X=4.3,
    param_4:       SCAN-STEP-Y=1.4
    req_1:         ONBOARD ACQ FOR 530.0;
    comment_1:     SEARCH 12.9X12.9 ARCSEC AREA
    comment_2:     FOLLOW WITH NORMAL ACQ/BIN

!

    linenum:       530.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLN
    targname:      N-FOS
    config:        FOS/BL
    opmode:        ACQ/BINARY
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  3.3S
    s_to_n:        17
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 532;
    req_2:         SEQ 530-532.1 NON-INT;

!

    linenum:       532.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLN
    targname:      N-FOS
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  6.0S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE-X=4,
    param_2:       SEARCH-SIZE-Y=4,
    param_3:       SCAN-STEP-X=0.1,
    param_4:       SCAN-STEP-Y=0.1
    req_1:         ONBOARD ACQ FOR 532.1;

!

    linenum:       532.100
    sequence_1:    DEFINE
    sequence_2:    FOSBLN
    targname:      N-FOS
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    MIRROR
    num_exp:       1
    time_per_exp:  58S
    s_to_n:        30
    fluxnum_1:     1
    priority:      1
    param_1:       Y-SPACE=12,
    param_2:       SUB-STEP=4,
    param_3:       Y-SIZE=48

!

    linenum:       533.000
    sequence_1:    DEFINE
    sequence_2:    FOSBLN
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       539.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2N
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    req_1:         SEQ 539-542 NON-INT;
    req_2:         SEQ 539-549 NO GAP;
    req_3:         CYCLE 3/539-549;
    comment_1:     SWITCH TO TELEMETRY FORMAT FN

!

    linenum:       540.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2N
    targname:      N-HRS-1
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  30.6S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 542;

!

    linenum:       542.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2N
    targname:      N-HRS-1
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  25.6S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    comment_1:     VERIFICATION MAP.

!

    linenum:       544.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2N
    targname:      N-HRS-2
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  30.6S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 545;
    comment_1:     STEPTIME=0.4S

!

    linenum:       545.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2N
    targname:      N-HRS-3
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  30.6S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 546;

!

    linenum:       546.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2N
    targname:      N-HRS-4
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  30.6S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 547;

!

    linenum:       547.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2N
    targname:      N-HRS-5
    config:        HRS
    opmode:        ACQ
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  30.6S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       BRIGHT=RETURN,
    param_3:       MAP=END-POINT
    req_1:         ONBOARD ACQ FOR 548.0;

!

    linenum:       548.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2N
    targname:      N-HRS-1
    config:        HRS
    opmode:        IMAGE
    aperture:      2.0
    sp_element:    MIRROR-N2
    num_exp:       1
    time_per_exp:  25.6S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    comment_1:     VERIFICATION MAP.

!

    linenum:       549.000
    sequence_1:    DEFINE
    sequence_2:    HRSD2N
    targname:      DARK
    config:        S/C
    opmode:        POINTING
    aperture:      V1
    num_exp:       1
    time_per_exp:  1M
    priority:      1
    comment_1:     SWITCH BACK TO TELEMETRY FORMAT AN

!

    linenum:       600.000
    sequence_1:    USE
    sequence_2:    FOSBLN
    req_1:         SEQ 600-645 NO GAP;
    comment_1:     **SPECIFIC GUIDE STARS **

!

    linenum:       605.000
    sequence_1:    USE
    sequence_2:    FOSRDN
    comment_1:     **SPECIFIC GUIDE STARS **

!

    linenum:       620.000
    sequence_1:    USE
    sequence_2:    HRSD2N
    comment_1:     **SPECIFIC GUIDE STARS **

!

    linenum:       640.000
    sequence_1:    USE
    sequence_2:    FOC188
    comment_1:     **SPECIFIC GUIDE STARS **

!

    linenum:       645.000
    targname:      DARK
    config:        S/C
    opmode:        DATA
    aperture:      V1
    num_exp:       1
    time_per_exp:  20M
    priority:      1
    req_1:         CYCLE 3;
    req_2:         RT-ANALYSIS;
    comment_1:     DUMP ENG TAPE RECORDER (BTAPEDUMP)

!

    linenum:       650.000
    targname:      WFC2-NGCCEN
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  1.0S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 522.1

!

    linenum:       651.000
    targname:      WFC2-NGCCEN
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  50S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 532.1

!

    linenum:       652.000
    targname:      WFC2-NGCCEN
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  1.0S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 542.0

!

    linenum:       653.000
    targname:      WFC2-NGCCEN
    config:        WFPC2
    opmode:        IMAGE
    aperture:      WFALL
    sp_element:    F555W
    num_exp:       1
    time_per_exp:  10.0S
    s_to_n:        20
    fluxnum_1:     1
    priority:      1
    param_1:       ATD-GAIN=15
    req_1:         CYCLE 4;
    req_2:         PAR;
    comment_1:     SPACECRAFT MUST NOT MOVE.
    comment_2:     PAR WITH 60 (SIXTY).

!
! end of exposure logsheet

! No scan data records found