! $Id: 4709,v 4.1 1994/07/27 14:31:40 pepsa Exp $ coverpage: title_1: WFPC-2 INTERNAL MONITOR proposal_for: SMC/WF2 pi_fname: JOHN pi_lname: TRAUGER pi_inst: JPL pi_country: USA pi_phone: 818-354-9594 hours_par: 10.00 wf_pc: Y ! end of coverpage abstract: line_1: This proposal defines the routine internal monitor to be run line_2: "weekly" for the WFPC2 in SMOV. The initial data set includes line_3: bias frames, k-spot images and visflat images. After the UV line_4: cal lamp is enabled, uvflat images will be taken. After the line_5: TECs are turned on, long dark frames will be taken. ! ! end of abstract general_form_proposers: lname: TRAUGER fname: JOHN inst: JPL country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: These activities will monitor the basic instrumental performance line_2: of the WFPC2, including image stability via the K-spots, bias line_3: levels, contamination, and flat field stability. ! question: 5 section: 1 line_1: Prerequisites: 1) INTMON1 sequence: WFPC2 in at least conditional operate line_2: mode with KSPOT and VISFLAT lamp checkout complete (via proposal 4707). line_3: 2) INTMON2 sequence: Contamination clear received from science team for turn line_4: on of UVFLAT lamp (+ the above prerequisites) line_5: 3) DARK sequence: After TECs are turned on. line_7: Use INTMON1 (lines 100-108) once per week until contamination line_8: clear approval received. line_9: Use INTMON2 (lines 200-212) once per week once contamination line_10: clear approval received. line_11: Use DARK (lines 300-305) once every other week if TECs are on. ! !end of general form text general_form_address: lname: TRAUGER fname: JOHN category: PI inst: JPL addr_1: 4800 OAK GROVE DRIVE addr_2: MAIL STOP 179-225 city: PASADENA state: CA zip: 91109 country: USA phone: 818-354-9594 ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEFINE sequence_2: INTMON1 targname: BIAS config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 2 time_per_exp: 0S priority: 1 param_1: ATD-GAIN=7 req_1: CYCLE 4/1-305 comment_1: 7 E- GAIN BIAS FRAMES ! linenum: 2.000 sequence_1: DEFINE sequence_2: INTMON1 targname: BIAS config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 2 time_per_exp: 0S priority: 1 param_1: ATD-GAIN=15 comment_1: 15 E- GAIN BIAS FRAMES ! linenum: 3.000 sequence_1: DEFINE sequence_2: INTMON1 targname: DARK config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 1 time_per_exp: 40S param_1: ATD-GAIN=7 comment_1: INTMON1 WILL BE RUN WHEN THE comment_2: CCD TEMPS ARE AT -20C, SO DARKS comment_3: ARE REQUIRED. THIS FRAME IS comment_4: INTENDED TO MATCH THE DARK OF comment_5: AN EXPOSURE CARRIED OUT IN comment_6: 1 MAJOR FRAME. ! linenum: 4.000 sequence_1: DEFINE sequence_2: INTMON1 targname: DARK config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 1 time_per_exp: 80S param_1: ATD-GAIN=7 comment_1: THIS FRAME IS comment_2: INTENDED TO MATCH THE DARK comment_3: OF AN EXPOSURE CARRIED OUT comment_4: IN 2 MAJOR FRAMES. ! linenum: 5.000 sequence_1: DEFINE sequence_2: INTMON1 targname: KSPOTS config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 1 time_per_exp: 1S priority: 1 param_1: ATD-GAIN=15 ! linenum: 6.000 sequence_1: DEFINE sequence_2: INTMON1 targname: KSPOTS config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 1 time_per_exp: 2.6S priority: 1 param_1: ATD-GAIN=15 comment_1: K-SPOT IMAGES ! linenum: 7.000 sequence_1: DEFINE sequence_2: INTMON1 targname: INTFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F555W num_exp: 2 time_per_exp: 23S priority: 1 param_1: ATD-GAIN=15 comment_1: FLAT WITH WFPC INTERNAL comment_2: CALIBRATION LAMP. TWO comment_3: EXPOSURES IN SEQUENCE GIVE comment_4: ONE EXPOSURE PER SHUTTER comment_5: BLADE. ! linenum: 8.000 sequence_1: DEFINE sequence_2: INTMON1 targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F555W num_exp: 2 time_per_exp: 3S priority: 1 param_1: ATD-GAIN=15 comment_1: THE NEXT FEW EXPOSURES ARE TAKEN comment_2: WITH THE CAL SYSTEM. IF NECESSARY, comment_3: THESE SHOULD BE GROUPED INTO PIECES comment_4: AND REORDERED SO AS TO AVOID PROBLEMS comment_5: WITH CAL SYSTEM USAGE CONSTRAINTS. ! linenum: 8.500 sequence_1: DEFINE sequence_2: INTMON1 targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F555W num_exp: 2 time_per_exp: .11S priority: 1 param_1: ATD-GAIN=7 comment_1: CHECK SHUTTER SHADING. ! linenum: 9.000 sequence_1: DEFINE sequence_2: INTMON1 targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F439W num_exp: 2 time_per_exp: 80S priority: 1 param_1: ATD-GAIN=15 ! linenum: 10.000 sequence_1: DEFINE sequence_2: INTMON1 targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: FR533N num_exp: 1 time_per_exp: 120S priority: 1 param_1: ATD-GAIN=15 comment_1: THESE IMAGES MONITOR ADC PERFORMANCE ! linenum: 11.000 sequence_1: DEFINE sequence_2: INTMON1 targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: FR533N num_exp: 1 time_per_exp: 60S priority: 1 param_1: ATD-GAIN=7 ! linenum: 12.000 sequence_1: DEFINE sequence_2: INTMON1 targname: DARK config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 1 time_per_exp: 40S comment_1: THIS FRAME IS comment_2: INTENDED TO MATCH THE DARK comment_3: OF AN EXPOSURE CARRIED OUT comment_4: IN 1 MAJOR FRAME. ! linenum: 13.000 sequence_1: DEFINE sequence_2: INTMON1 targname: DARK config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 1 time_per_exp: 80S comment_1: THIS FRAME IS comment_2: INTENDED TO MATCH THE DARK comment_3: OF AN EXPOSURE CARRIED OUT comment_4: IN 2 MAJOR FRAMES. ! linenum: 21.000 sequence_1: DEFINE sequence_2: INTMON2 targname: BIAS config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 2 time_per_exp: 0S priority: 1 param_1: ATD-GAIN=7 comment_1: 7 E- GAIN BIAS FRAMES ! linenum: 22.000 sequence_1: DEFINE sequence_2: INTMON2 targname: BIAS config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 2 time_per_exp: 0S priority: 1 param_1: ATD-GAIN=15 comment_1: 15 E- GAIN BIAS FRAMES ! linenum: 23.000 sequence_1: DEFINE sequence_2: INTMON2 targname: KSPOTS config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 1 time_per_exp: 1S priority: 1 param_1: ATD-GAIN=15 ! linenum: 24.000 sequence_1: DEFINE sequence_2: INTMON2 targname: KSPOTS config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 1 time_per_exp: 2.6S priority: 1 param_1: ATD-GAIN=15 comment_1: K-SPOT IMAGES ! linenum: 25.000 sequence_1: DEFINE sequence_2: INTMON2 targname: INTFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F555W num_exp: 2 time_per_exp: 23S priority: 1 param_1: ATD-GAIN=15 comment_1: FLAT WITH WFPC INTERNAL comment_2: CALIBRATION LAMP. TWO comment_3: EXPOSURES IN SEQUENCE GIVE comment_4: ONE EXPOSURE PER SHUTTER comment_5: BLADE. ! linenum: 26.000 sequence_1: DEFINE sequence_2: INTMON2 targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F555W num_exp: 2 time_per_exp: 3S priority: 1 param_1: ATD-GAIN=15 comment_1: THE NEXT FEW EXPOSURES ARE TAKEN comment_2: WITH THE CAL SYSTEM. IF NECESSARY, comment_3: THESE SHOULD BE GROUPED INTO PIECES comment_4: AND REORDERED SO AS TO AVOID PROBLEMS comment_5: WITH CAL SYSTEM USAGE CONSTRAINTS. ! linenum: 26.500 sequence_1: DEFINE sequence_2: INTMON2 targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F555W num_exp: 2 time_per_exp: .11S priority: 1 param_1: ATD-GAIN=7 comment_1: CHECK SHUTTER SHADING. ! linenum: 27.000 sequence_1: DEFINE sequence_2: INTMON2 targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F439W num_exp: 2 time_per_exp: 80S priority: 1 param_1: ATD-GAIN=15 ! linenum: 28.000 sequence_1: DEFINE sequence_2: INTMON2 targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: FR533N num_exp: 1 time_per_exp: 120S priority: 1 param_1: ATD-GAIN=15 ! linenum: 29.000 sequence_1: DEFINE sequence_2: INTMON2 targname: VISFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: FR533N num_exp: 1 time_per_exp: 60S priority: 1 param_1: ATD-GAIN=7 ! linenum: 30.000 sequence_1: DEFINE sequence_2: INTMON2 targname: UVFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F160BW num_exp: 2 time_per_exp: 500S priority: 1 param_1: ATD-GAIN=7 ! linenum: 31.000 sequence_1: DEFINE sequence_2: INTMON2 targname: UVFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F170W num_exp: 2 time_per_exp: 500S priority: 1 param_1: ATD-GAIN=7 ! linenum: 32.000 sequence_1: DEFINE sequence_2: INTMON2 targname: UVFLAT config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: F255W num_exp: 2 time_per_exp: 500S priority: 1 param_1: ATD-GAIN=7 ! linenum: 41.000 sequence_1: DEFINE sequence_2: DARK targname: DARK config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 3 time_per_exp: 2000S param_1: ATD-GAIN=7 param_2: CR-SPLIT = NO ! linenum: 42.000 sequence_1: DEFINE sequence_2: DARK targname: DARK config: WFPC2 opmode: IMAGE aperture: WFALL sp_element: DEF num_exp: 3 time_per_exp: 2000S param_1: ATD-GAIN=7, param_2: CLOCKS=YES param_3: CR-SPLIT = NO comment_1: DARK FRAMES WITH SERIALS ON ! linenum: 100.000 sequence_1: USE sequence_2: INTMON1 comment_1: INTMON1 SEQUENCE SHOULD BE RUN ONCE comment_2: PER WEEK UNTIL CONTAMINATION CLEAR comment_3: ALLOWS UVFLAT LAMP TO TURN ON. ! linenum: 101.000 sequence_1: USE sequence_2: INTMON1 comment_1: INTMON1 SEQUENCE SHOULD BE RUN ONCE comment_2: PER WEEK UNTIL CONTAMINATION CLEAR comment_3: ALLOWS UVFLAT LAMP TO TURN ON. comment_4: AFTER 100 BY 7D +/- 3D. ! linenum: 102.000 sequence_1: USE sequence_2: INTMON1 comment_1: INTMON1 SEQUENCE SHOULD BE RUN ONCE comment_2: PER WEEK UNTIL CONTAMINATION CLEAR comment_3: ALLOWS UVFLAT LAMP TO TURN ON. comment_4: AFTER 101 BY 7D +/- 3D. ! linenum: 103.000 sequence_1: USE sequence_2: INTMON1 comment_1: INTMON1 SEQUENCE SHOULD BE RUN ONCE comment_2: PER WEEK UNTIL CONTAMINATION CLEAR comment_3: ALLOWS UVFLAT LAMP TO TURN ON. comment_4: AFTER 102 BY 7D +/- 3D. ! linenum: 104.000 sequence_1: USE sequence_2: INTMON1 comment_1: INTMON1 SEQUENCE SHOULD BE RUN ONCE comment_2: PER WEEK UNTIL CONTAMINATION CLEAR comment_3: ALLOWS UVFLAT LAMP TO TURN ON. comment_4: AFTER 103 BY 7D +/- 3D. ! linenum: 105.000 sequence_1: USE sequence_2: INTMON1 comment_1: INTMON1 SEQUENCE SHOULD BE RUN ONCE comment_2: PER WEEK UNTIL CONTAMINATION CLEAR comment_3: ALLOWS UVFLAT LAMP TO TURN ON. comment_4: AFTER 104 BY 7D +/- 3D. ! linenum: 106.000 sequence_1: USE sequence_2: INTMON1 comment_1: INTMON1 SEQUENCE SHOULD BE RUN ONCE comment_2: PER WEEK UNTIL CONTAMINATION CLEAR comment_3: ALLOWS UVFLAT LAMP TO TURN ON. comment_4: AFTER 105 BY 7D +/- 3D. ! linenum: 107.000 sequence_1: USE sequence_2: INTMON1 comment_1: INTMON1 SEQUENCE SHOULD BE RUN ONCE comment_2: PER WEEK UNTIL CONTAMINATION CLEAR comment_3: ALLOWS UVFLAT LAMP TO TURN ON. comment_4: AFTER 106 BY 7D +/- 3D. ! linenum: 108.000 sequence_1: USE sequence_2: INTMON1 comment_1: INTMON1 SEQUENCE SHOULD BE RUN ONCE comment_2: PER WEEK UNTIL CONTAMINATION CLEAR comment_3: ALLOWS UVFLAT LAMP TO TURN ON. comment_4: AFTER 107 BY 7D +/- 3D. ! linenum: 200.000 sequence_1: USE sequence_2: INTMON2 req_1: COND IF CONTAM CLEAR/200-212; comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. ! linenum: 201.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 200 BY 7D +/- 3D. ! linenum: 202.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 201 BY 7D +/- 3D. ! linenum: 203.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 202 BY 7D +/- 3D. ! linenum: 204.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 203 BY 7D +/- 3D. ! linenum: 205.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 204 BY 7D +/- 3D. ! linenum: 206.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 205 BY 7D +/- 3D. ! linenum: 207.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 206 BY 7D +/- 3D. ! linenum: 208.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 207 BY 7D +/- 3D. ! linenum: 209.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 208 BY 7D +/- 3D. ! linenum: 210.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 209 BY 7D +/- 3D. ! linenum: 211.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 210 BY 7D +/- 3D. ! linenum: 212.000 sequence_1: USE sequence_2: INTMON2 comment_1: THESE LINES SHOULD ONLY BE EXECUTED comment_2: ONCE THE CONTAMINATION CLEAR APPROVAL comment_3: HAS BEEN RECEIVED FROM SCIENCE TEAM. comment_4: THIS SEQUENCE SHOULD THEN REPLACE THE comment_5: INTMON1 SEQUENCE IN ITS ENTIRETY. comment_6: AFTER 211 BY 7D +/- 3D. ! linenum: 300.000 sequence_1: USE DARK req_1: COND IF TECS ON/300-305; ! linenum: 301.000 sequence_1: USE DARK comment_1: AFTER 300 BY 14D +/- 5D. ! linenum: 302.000 sequence_1: USE DARK comment_1: AFTER 301 BY 14D +/- 5D. ! linenum: 303.000 sequence_1: USE DARK comment_1: AFTER 302 BY 14D +/- 5D. ! linenum: 304.000 sequence_1: USE DARK comment_1: AFTER 303 BY 14D +/- 5D. ! linenum: 305.000 sequence_1: USE DARK comment_1: AFTER 304 BY 14D +/- 5D. ! ! end of exposure logsheet ! No scan data records found