! File: 4699C.PROP ! Database: PEPDB ! Date: 22-FEB-1994:22:56:26 coverpage: title_1: FOS CYCLE 2 SPECTRAL FLAT FIELDS proposal_for: CAL/FOS pi_fname: CHARLES (TONY) pi_lname: KEYES pi_inst: STSCI pi_country: USA pi_phone: 410-338-4975 num_pri: 1 fos: Y pi_position: I.S. ! end of coverpage abstract: line_1: Some FOS detector/disperser combinations have shown temporal line_2: variations in their flat field structure during SV and Cycle line_3: 1. This set of observations will produce additional flat line_4: field calibrations appropriate to the Cycle 2 time period. line_5: At one epoch during Cycle 2, high S/N spectra are obtained line_6: for G191B2B, which has a relatively featureless spectrum and line_7: which has been the primary target for earlier flat field line_8: observations. Observations are made through both the 4.3 line_9: arcsec square and either the 1.0 arcsec round or the line_10: 0.25x2.0 arcsec slit apertures with all usable line_11: detector/disperser combinations, except those that are line_12: to be monitored on a bi-monthly basis in companion proposal line_13: 4123, "FOS Spectral Flat Fields Monitor, Revised." ! ! end of abstract general_form_proposers: lname: KEYES fname: CHARLES (TONY) inst: STSCI country: USA ! lname: KINNEY fname: ANNE inst: STSCI country: USA ! lname: HARTIG fname: GEORGE inst: STSCI country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: This set of observations will produce additional flat line_2: field calibrations appropriate to the Cycle 2 time period. line_3: At one epoch during Cycle 2, high S/N spectra are obtained line_4: for G191B2B, which has a relatively featureless spectrum and line_5: which has been the primary target in earlier flat field line_6: calibration proposals. Observations are made through both the 4.3 line_7: arcsec square and either 1.0 arcsec round (only for polarizer line_8: observations) or the 0.25x2.0 arcsec slit apertures since the line_9: FOS flat field structure is somewhat dependent on aperture size. line_10: All detector/disperser combinations will be used, except those line_11: to be monitored on a bi-monthly basis in companion proposal line_12: 4123, "FOS Spectral Flat Fields Monitor, Revised." ! question: 5 section: 1 line_1: NOTE: It is required that ALL of the FOS/BL POLARIMETRY line_2: observations (lines 31 through 98 inclusive) in this proposal line_3: be scheduled AFTER the onboard GIM correction is in place. line_4: These lines (31-98 inclusive) should be scheduled ONLY line_5: after the blue-side Y-bases have been re-determined in line_6: companion proposal "FOS POLARIMETRIC CALIBRATION." line_7: PLEASE NOTE: ALL LINES IN THIS PROPOSAL should await GIM line_8: correction. ! question: 6 section: 1 line_1: This proposal will provide a contemporaneous flat field line_2: for the PODPS pipeline calibration of Cycle 2 data. ! question: 7 section: 1 line_1: Data reduction will be performed at the STScI, and the analysis will be line_2: performed using STScI computer facilities. This is a calibration, so the line_3: resulting data will need to be added to CDBS for use in the PODPS pipeline. ! !end of general form text general_form_address: lname: KEYES fname: CHARLES (TONY) category: PI inst: STSCI addr_1: SPD addr_2: RM 301 city: BALTIMORE state: MD zip: 21218 country: USA phone: 410-338-4975 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: WD0501+527 name_2: G191-B2B name_3: GSSS3734-0506 descr_1: J,705,702 pos_1: RA=05H 05M 30.6S +/- 0.01S, pos_2: DEC=+52D 49' 54.0" +/- 0.2" equinox: 2000 pm_or_par: Y pos_epoch_bj: J pos_epoch_yr: 1983.10 ra_pm_val: 0.000500 ra_pm_unct: 0.000333 dec_pm_val: -0.0880 dec_pm_unct: 0.0050 comment_1: THE GUIDE STAR CATALOG NAME comment_2: IS GIVEN. fluxnum_1: 1 fluxval_1: V = 11.78 +/- 0.02 fluxnum_2: 2 fluxval_2: B = 11.44 +/- 0.02 fluxnum_3: 3 fluxval_3: U = 10.24 +/- 0.02 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 4.3 sp_element: G270H num_exp: 1 time_per_exp: 1.0S priority: 1 req_1: ONBOARD ACQ FOR 1.1; req_2: SPATIAL SCAN; req_3: SEQ 1.000-10.000 NO GAP; ! linenum: 1.100 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 1.0S priority: 1 req_1: ONBOARD ACQ FOR 1.2; req_2: SPATIAL SCAN; ! linenum: 1.200 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 2.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=4, param_2: SCAN-STEP=0.2 req_1: ONBOARD ACQ FOR 1.3; ! linenum: 1.300 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 0.25X2.0 sp_element: G270H num_exp: 1 time_per_exp: 2.0S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 2.000-10.000; req_2: SPATIAL SCAN; ! linenum: 2.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 0.25X2.0 sp_element: G400H num_exp: 1 time_per_exp: 2025S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 3.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 0.25X2.0 sp_element: G650L num_exp: 1 time_per_exp: 900S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 4.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 0.25X2.0 sp_element: PRISM num_exp: 1 time_per_exp: 48S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 6.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 0.25X2.0 sp_element: G570H num_exp: 1 time_per_exp: 2400S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 7.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: G570H num_exp: 1 time_per_exp: 960S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 8.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: G400H num_exp: 1 time_per_exp: 810S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 9.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: G650L num_exp: 1 time_per_exp: 360S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 10.000 sequence_1: DEFINE sequence_2: G191RD targname: # config: FOS/RD opmode: IMAGE aperture: 4.3 sp_element: PRISM num_exp: 1 time_per_exp: 21S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 11.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACQ/PEAK aperture: 4.3 sp_element: G270H num_exp: 1 time_per_exp: 2.0S priority: 1 req_1: ONBOARD ACQ FOR 11.1; req_2: SPATIAL SCAN; req_3: SEQ 11.000-24.000 NO GAP; ! linenum: 11.100 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACQ/PEAK aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 2.0S priority: 1 req_1: ONBOARD ACQ FOR 11.2; req_2: SPATIAL SCAN; ! linenum: 11.200 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 4.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=4, param_2: SCAN-STEP=0.2 req_1: ONBOARD ACQ FOR 11.3; ! linenum: 11.300 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: ACQ/PEAK aperture: 0.25X2.0 sp_element: G270H num_exp: 1 time_per_exp: 4.0S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 13.000-24.000; req_2: SPATIAL SCAN; ! linenum: 13.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 0.25X2.0 sp_element: G270H num_exp: 1 time_per_exp: 2400S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 14.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 0.25X2.0 sp_element: G190H num_exp: 1 time_per_exp: 2400S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 15.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 0.25X2.0 sp_element: G130H num_exp: 1 time_per_exp: 2400S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 16.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 0.25X2.0 sp_element: G400H num_exp: 1 time_per_exp: 2400S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 17.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 0.25X2.0 sp_element: G160L num_exp: 1 time_per_exp: 450S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 18.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 0.25X2.0 sp_element: PRISM num_exp: 1 time_per_exp: 375S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 19.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: PRISM num_exp: 1 time_per_exp: 150S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 20.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: G270H num_exp: 1 time_per_exp: 960S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 21.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: G190H num_exp: 1 time_per_exp: 1080S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 22.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: G130H num_exp: 1 time_per_exp: 1080S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 23.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: G400H num_exp: 1 time_per_exp: 1260S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 24.000 sequence_1: DEFINE sequence_2: G191BL targname: # config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: G160L num_exp: 1 time_per_exp: 180S s_to_n: 200 priority: 1 param_1: Y-SIZE=3, param_2: Y-SPACE=10.7, param_3: COMB=YES, param_4: SUB-STEP=4, ! linenum: 31.000 sequence_1: DEFINE sequence_2: G191BLP targname: # config: FOS/BL opmode: ACQ/PEAK aperture: 4.3 sp_element: G270H num_exp: 1 time_per_exp: 2.0S priority: 1 req_1: ONBOARD ACQ FOR 31.1; req_2: SPATIAL SCAN; req_3: SEQ 31.000-39.000 NO GAP; ! linenum: 31.100 sequence_1: DEFINE sequence_2: G191BLP targname: # config: FOS/BL opmode: ACQ/PEAK aperture: 1.0 sp_element: G270H num_exp: 1 time_per_exp: 2.0S priority: 1 req_1: ONBOARD ACQ FOR 31.2; req_2: SPATIAL SCAN; ! linenum: 31.200 sequence_1: DEFINE sequence_2: G191BLP targname: # config: FOS/BL opmode: ACQ/PEAK aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 4.0S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=4, param_2: SCAN-STEP=0.2 req_1: ONBOARD ACQ FOR 32.000-39.000; ! linenum: 32.000 sequence_1: DEFINE sequence_2: G191BLP targname: # config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: G270H,POL0-B num_exp: 1 time_per_exp: 1620S s_to_n: 200 priority: 1 ! linenum: 33.000 sequence_1: DEFINE sequence_2: G191BLP targname: # config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: G190H,POL0-B num_exp: 1 time_per_exp: 1890S s_to_n: 200 priority: 1 ! linenum: 34.000 sequence_1: DEFINE sequence_2: G191BLP targname: # config: FOS/BL opmode: IMAGE aperture: 1.0 sp_element: G130H,POL0-B num_exp: 1 time_per_exp: 2300S s_to_n: 200 priority: 1 ! linenum: 35.000 sequence_1: DEFINE sequence_2: G191BLP targname: # config: FOS/BL opmode: IMAGE aperture: 1.0-PAIR-A sp_element: G160L num_exp: 1 time_per_exp: 1800S s_to_n: 200 priority: 1 param_1: STEP-PATT=SINGLE; param_2: Y-SIZE=3; param_3: Y-SPACE=10; param_4: COMB=YES; param_5: SUB-STEP=4 ! linenum: 36.000 sequence_1: DEFINE sequence_2: G191BLP targname: # config: FOS/BL opmode: IMAGE aperture: 4.3-PAIR-B sp_element: G160L num_exp: 1 time_per_exp: 1800S s_to_n: 200 priority: 1 param_1: STEP-PATT=SINGLE; param_2: Y-SIZE=3; param_3: Y-SPACE=10; param_4: COMB=YES; param_5: SUB-STEP=4 ! linenum: 37.000 sequence_1: DEFINE sequence_2: G191BLP targname: # config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: G270H,POL0-B num_exp: 1 time_per_exp: 1080S s_to_n: 200 priority: 1 ! linenum: 38.000 sequence_1: DEFINE sequence_2: G191BLP targname: # config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: G190H,POL0-B num_exp: 1 time_per_exp: 1260S s_to_n: 200 priority: 1 ! linenum: 39.000 sequence_1: DEFINE sequence_2: G191BLP targname: # config: FOS/BL opmode: IMAGE aperture: 4.3 sp_element: G130H,POL0-B num_exp: 1 time_per_exp: 2300S s_to_n: 200 priority: 1 ! linenum: 98.000 sequence_1: USE sequence_2: G191BLP targname: WD0501+527 req_1: COND IF AFTER ONBOARD GIMP/1-100; comment_1: DO NOT EXECUTE UNTIL; comment_2: GIMP FIX INSTALLED; ! linenum: 99.000 sequence_1: USE sequence_2: G191RD targname: WD0501+527 req_1: CYCLE 2/1-100; req_2: GROUP 99-100 WITHIN 14D; ! linenum: 100.000 sequence_1: USE sequence_2: G191BL targname: WD0501+527 ! ! end of exposure logsheet scan_data: line_list: 1.0,11.0,31.0 fgs_scan: cont_dwell: D dwell_pnts: 3 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 2.8000 sides_angle: 90.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 1.4 wid_offset: 0.0 ! line_list: 1.1,11.1,31.1 fgs_scan: cont_dwell: D dwell_pnts: 6 dwell_secs: 1.00 scan_width: 0.7000 scan_length: 3.5000 sides_angle: 90.0000 number_lines: 2 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 1.75 wid_offset: 0.35 ! line_list: 1.3,11.300 fgs_scan: cont_dwell: D dwell_pnts: 7 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 0.4000 sides_angle: 90.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 0.2 wid_offset: 0.0 ! ! end of scan data