! File: 4697C.PROP ! Database: PEPDB ! Date: 22-FEB-1994:22:48:58 coverpage: title_1: FOS POLARIMETRIC CALIBRATION proposal_for: CAL/FOS cont_id: 2824 pi_fname: CHARLES (TONY) pi_lname: KEYES pi_inst: STSCI pi_country: USA pi_phone: 301-338-4975 num_pri: 1 fos: Y ! end of coverpage abstract: line_1: SV-calibrated combinations of detector, disperser, and line_2: waveplate that are now likely to be used for polarimetry line_3: will be re-measured. Y-bases and wavelength scales for line_4: these combinations will be re-calibrated. Further, with the line_5: implementation of the onboard GIM correction, red side line_6: polarimetry is feasible. Useful red side polarimetry setup line_7: Y-base, wavelength scale, flat field, and IVS observations line_8: will be obtained. ! ! end of abstract general_form_proposers: lname: KEYES fname: CHARLES (TONY) inst: STSCI country: USA ! lname: KINNEY fname: ANNE inst: STSCI country: USA ! lname: TAYLOR fname: CYNTHIA inst: STSCI country: USA ! lname: BOHLIN fname: RALPH inst: SPACE TELESCOPE SCIENCE INSTITUTE country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: The calibrations are needed to maintain the level of calibration line_2: achieved at the end of SV. Additional redside configurations are also line_3: calibrated: G190H and G270H with the B waveplate and G400H with the line_4: A waveplate. ! question: 3 section: 1 line_1: Measurements of the internal Pt-Ne lamps will be used to locate the line_2: two oppositely polarized spectra that occur with the polarimeter. The line_3: positions of the split spectra will be compared to those of spectra taken line_4: without the polarimeter. The data will be used to determine a wavelength scale line_5: for the most commonly used modes of the polarimeter. line_6: Standard star BD+28 4211 will be observed to provide flat line_7: field and IVS calibration for RED side polarimetry AFTER line_8: onboard GIM correction is implemented. ! question: 4 section: 1 line_1: Not applicable ! question: 5 section: 1 line_1: Note that it is required that ALL of these observations be line_2: performed AFTER the onboard GIM correction algorithm is line_3: in place. ! question: 5 section: 2 line_1: line_11: Note that for the y-base maps with the polarizer (sequences line_12: P-MAPB and P-MAPR), the map is normally centered on the y-base line_13: for the lower of the two polarization spectra. We have line_14: therefore broken the maps into two segments, one to be line_15: centered on the lower spectrum, and one to be centered on the line_16: upper. The lower will use the default Y value, while the line_17: upper should be +750 Y-units from the lower. ! question: 6 section: 1 line_1: Polarimetric observations need to be taken as a single sequence of line_2: observations. Changes in background, position angle of the spacecraft, and line_3: other variables can all adversely affect the results. ! question: 7 section: 1 line_1: Data reduction and analysis will be performed at the ST ScI. line_2: This program is a calibration, so the resulting data will line_3: need to be added to the PODPS pipeline. ! !end of general form text general_form_address: lname: KEYES fname: CHARLES (TONY) category: PI inst: STSCI addr_1: 3700 SAN MARTIN DR. city: BALTIMORE state: MD zip: 21218 country: USA phone: 301-338-4975 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: BD+28D4211 name_2: GSC 2214-1198 descr_1: J,702 pos_1: RA = 21H 51M 11.1S +/- 0.01S, pos_2: DEC = +28D 51' 51.8" +/- 0.2" equinox: 2000 comment_1: THE GSC NAME IS GIVEN. fluxnum_1: 1 fluxval_1: V = 10.53 +/- 0.05 fluxnum_2: 2 fluxval_2: B = 10.19 +/- 0.05 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 81.000 sequence_1: DEFINE sequence_2: P-MAPB targname: WAVE config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: G130H num_exp: 1 time_per_exp: 90S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24 req_1: SEQ 81-86.900 NO GAP; ! linenum: 82.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G130H,POL0-B num_exp: ^ time_per_exp: 450S priority: ^ param_1: ^ comment_1: FOR LOWER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 82.500 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: ^ priority: ^ param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24, param_4: Y-OFFSET=750 comment_1: FOR UPPER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 83.100 sequence_1: DEFINE sequence_2: P-MAPB targname: WAVE config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: G160L num_exp: 1 time_per_exp: 15S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24 ! linenum: 83.200 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G160L,POL0-B num_exp: ^ time_per_exp: 75S priority: ^ param_1: ^ comment_1: FOR LOWER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 83.300 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: ^ priority: ^ param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24, param_4: Y-OFFSET=750 comment_1: FOR UPPER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 86.400 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G270H num_exp: ^ time_per_exp: 6S priority: ^ param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24 ! linenum: 86.500 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G270H,POL0-B num_exp: ^ time_per_exp: 30S priority: ^ param_1: ^ comment_1: FOR LOWER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 86.600 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: ^ priority: ^ param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24, param_4: Y-OFFSET=750 comment_1: FOR UPPER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 86.700 sequence_1: DEFINE sequence_2: P-MAPB targname: WAVE config: FOS/BL opmode: IMAGE aperture: 0.3 sp_element: G190H num_exp: 1 time_per_exp: 18S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24 ! linenum: 86.800 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G190H,POL0-B num_exp: ^ time_per_exp: 90S priority: ^ param_1: ^ comment_1: FOR LOWER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 86.900 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: ^ priority: ^ param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24, param_4: Y-OFFSET=750 comment_1: FOR UPPER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 87.000 sequence_1: DEFINE sequence_2: P-MAPR targname: WAVE config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 24S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24 req_1: SEQ 87-89.200 NO GAP; ! linenum: 88.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G270H,POL0-B num_exp: ^ time_per_exp: 120S priority: ^ param_1: ^ comment_1: FOR LOWER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 88.500 sequence_1: DEFINE sequence_2: P-MAPR targname: WAVE config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: G270H,POL0-B num_exp: 1 time_per_exp: 120S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24, param_4: Y-OFFSET=750 comment_1: FOR UPPER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 88.600 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G190H num_exp: 1 time_per_exp: 56S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24 ! linenum: 88.700 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G190H,POL0-B num_exp: ^ time_per_exp: 280S priority: ^ param_1: ^ comment_1: FOR LOWER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 88.800 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: ^ priority: ^ param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24, param_4: Y-OFFSET=750 comment_1: FOR UPPER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 89.000 sequence_1: ^ sequence_2: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G400H num_exp: 1 time_per_exp: 56S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24 ! linenum: 89.100 sequence_1: DEFINE sequence_2: P-MAPR targname: WAVE config: FOS/RD opmode: IMAGE aperture: 0.3 sp_element: G400H,POL0-A num_exp: 1 time_per_exp: 280S priority: 1 param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24 comment_1: FOR LOWER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 89.200 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: ^ num_exp: ^ time_per_exp: ^ priority: ^ param_1: SUB-STEP=1, param_2: Y-SIZE=24, param_3: Y-SPACE=24, param_4: Y-OFFSET=750 comment_1: FOR UPPER SPECTRUM OF comment_2: POLARIZATION PAIR. ! linenum: 92.000 sequence_1: DEFINE sequence_2: PWAVB targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.3 sp_element: G130H num_exp: 1 time_per_exp: 150S priority: 1 req_1: SEQ 92-97.7 NO GAP; ! linenum: 93.000 sequence_1: DEFINE sequence_2: PWAVB targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.3 sp_element: G130H,POL0-B num_exp: 1 time_per_exp: 1500S priority: 1 ! linenum: 93.500 sequence_1: DEFINE sequence_2: PWAVB targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.3 sp_element: G160L num_exp: 1 time_per_exp: 25S priority: 1 ! linenum: 93.600 sequence_1: DEFINE sequence_2: PWAVB targname: WAVE config: FOS/BL opmode: ACCUM aperture: 0.3 sp_element: G160L,POL0-B num_exp: 1 time_per_exp: 250S priority: 1 ! linenum: 97.400 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G270H num_exp: ^ time_per_exp: 4S priority: ^ ! linenum: 97.500 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G270H,POL0-B num_exp: ^ time_per_exp: 20S priority: ^ ! linenum: 97.600 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G190H num_exp: ^ time_per_exp: 24S priority: ^ ! linenum: 97.700 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G190H,POL0-B num_exp: ^ time_per_exp: 100S priority: ^ ! linenum: 98.000 sequence_1: DEFINE sequence_2: PWAVR targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.3 sp_element: G270H num_exp: 1 time_per_exp: 10S priority: 1 req_1: SEQ 98-102 NO GAP; ! linenum: 99.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G270H,POL0-B num_exp: ^ time_per_exp: 50S priority: ^ ! linenum: 99.500 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G190H num_exp: ^ time_per_exp: 56S priority: ^ ! linenum: 99.600 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G190H,POL0-B num_exp: ^ time_per_exp: 280S priority: ^ ! linenum: 100.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G400H num_exp: ^ time_per_exp: 44S priority: ^ ! linenum: 102.000 sequence_1: DEFINE sequence_2: PWAVR targname: WAVE config: FOS/RD opmode: ACCUM aperture: 0.3 sp_element: G400H,POL0-A num_exp: 1 time_per_exp: 220S priority: 1 ! linenum: 103.000 sequence_1: USE sequence_2: P-MAPB req_1: CYCLE 2 / 81-200; req_2: GROUP 103-104 WITHIN req_3: 1D; COND IF AFTER GIMP FIX DONE / req_4: 81-200; ! linenum: 104.000 sequence_1: USE sequence_2: P-MAPR ! linenum: 105.000 sequence_1: USE sequence_2: PWAVB req_1: AFTER 103 BY 35D +/- 7D; ! linenum: 106.000 sequence_1: USE sequence_2: PWAVR req_1: AFTER 104 BY 35D +/- 7D; ! linenum: 150.500 sequence_1: DEFINE sequence_2: BD28-R targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 4.3 sp_element: G780H num_exp: 1 time_per_exp: 1S priority: 1 req_1: SPATIAL SCAN; req_2: ONBOARD ACQ FOR 151; ! linenum: 151.000 sequence_1: DEFINE sequence_2: BD28-R targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 1.0 sp_element: G780H num_exp: 1 time_per_exp: 1.6S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 151.1; req_2: SPATIAL SCAN; ! linenum: 151.100 sequence_1: DEFINE sequence_2: BD28-R targname: # config: FOS/RD opmode: ACQ/PEAK aperture: 0.3 sp_element: G780H num_exp: 1 time_per_exp: 4S fluxnum_1: 1 priority: 1 param_1: SEARCH-SIZE=5, param_2: SCAN-STEP=0.2 req_1: ONBOARD ACQ FOR 152-156; ! linenum: 152.000 sequence_1: DEFINE sequence_2: BD28-R targname: # config: FOS/RD opmode: ACCUM aperture: 4.3 sp_element: G270H,POL0-B num_exp: 1 time_per_exp: 400S s_to_n: 60 fluxnum_1: 1 priority: 1 req_1: SEQ 152-156 NO GAP; ! linenum: 155.000 sequence_1: DEFINE sequence_2: BD28-R targname: # config: FOS/RD opmode: ACCUM aperture: 4.3 sp_element: G190H,POL0-B num_exp: 1 time_per_exp: 400S s_to_n: 60 fluxnum_1: 1 priority: 1 ! linenum: 156.000 sequence_1: DEFINE sequence_2: BD28-R targname: # config: FOS/RD opmode: ACCUM aperture: 4.3 sp_element: G400H,POL0-A num_exp: 1 time_per_exp: 400S s_to_n: 75 fluxnum_1: 1 priority: 1 ! linenum: 200.000 sequence_1: USE sequence_2: BD28-R targname: BD+28D4211 req_1: AFTER 104 BY 49D +/- 14D; comment_1: THIS IS A TOP PRIORITY TARGET. ! ! end of exposure logsheet scan_data: line_list: 150.5 fgs_scan: cont_dwell: D dwell_pnts: 3 dwell_secs: 1.00 scan_width: 0.0000 scan_length: 2.8000 sides_angle: 90.0000 number_lines: 1 scan_rate: 0.0000 first_line_pa: 0.0000 scan_frame: S/C len_offset: 1.4 wid_offset: 0.0 ! line_list: 151.0 fgs_scan: cont_dwell: D dwell_pnts: 6 dwell_secs: 1.00 scan_width: 0.7000 scan_length: 3.5000 sides_angle: 90.0000 number_lines: 2 scan_rate: 0.0000 first_line_pa: 90.0000 scan_frame: S/C len_offset: 1.75 wid_offset: 0.35 ! ! end of scan data