! File: 4207C.PROP ! Database: PEPDB ! Date: 20-FEB-1994:13:16:31 coverpage: title_1: WF/PC CYCLE 2 CALIBRATION: PHOTOMETRIC CALIBRATION MONITOR proposal_for: CAL/WFC cont_id: 2877 pi_title: DR. pi_fname: JOHN pi_mi: W. pi_lname: MACKENTY pi_inst: STSCI pi_country: USA pi_phone: (301) 338-4559 keywords_1: CALIBRATION, FLAT FIELDS wf_pc: X ! end of coverpage abstract: line_1: THIS PROGRAM MONITORS THE QE OF THE WFC AND PC. line_2: Exposures in six wide filters in both the line_3: WF and PC are taken of a UV flux standard star. line_5: The program is repeated every 4 weeks. line_8: NOTE line_9: COARSE TRACK IS ACCEPTABLE IF FINE LOCK GUIDE STARS ARE NOT AVAILABLE. ! ! end of abstract general_form_proposers: lname: MACKENTY fname: JOHN mi: W. inst: STSCI country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: A single exposure is taken in each of six broad-band line_2: filters from F230W to F785LP of a UV flux standard star. line_3: W2 and P6 are used with single chip readout, line_4: The UV stars are bright, and the exposures are line_5: all less than 80s. ! question: 5 section: 0 line_1: It should be carried out regardless of the state of line_2: the UV flood. line_4: NOTE TO SCHEDULER line_5: COARSE TRACK IS ACCEPTABLE IF FINE LOCK GUIDES STARS ARE NOT AVAILABLE. ! question: 6 section: 1 line_1: Flux standards are needed to monitor throughput. ! question: 7 section: 1 line_1: These data will be archived at ScI and the numbers included line_2: in WF/PC Instrument Science Reports, used to update line_3: the CDB and the RSDP photometry tables. ! !end of general form text general_form_address: lname: MACKENTY fname: JOHN mi: W. title: DR. category: PI inst: STSCI addr_1: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA phone: (301) 338-4559 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: BD+28D4211 descr_1: FLUX STANDARD pos_1: RA = 21H 51M 11.07S +/- 1S, pos_2: DEC = +28D 51' 51.8" +/- 1" equinox: 2000. fluxnum_1: 1 fluxval_1: V=10.51 ! targnum: 2 name_1: BD+75D325 descr_1: FLUX STANDARD pos_1: RA = 08H 10M 49.31S +/- 1S, pos_2: DEC = +74D 57' 57.5" +/- 1" equinox: 2000. fluxnum_1: 1 fluxval_1: V=9.54 ! targnum: 3 name_1: A+81D266 name_2: GSC4547-1009 descr_1: UV STANDARD pos_1: RA = 09H 21M 19.06S +/- 1S, pos_2: DEC = +81D 43' 28.6" +/- 1", pos_3: PLATE-ID=00LN equinox: 2000. fluxnum_1: 1 fluxval_1: V = 11.92 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: WFC opmode: IMAGE aperture: W2 sp_element: F230W num_exp: 1 time_per_exp: 50S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES req_1: GROUP 1-12 WITHIN 1D; req_2: GROUP 1-6 NO GAP; req_3: PCS MODE F / 1-6; comment_1: SEQUENCE FOR STAR A+81D266. comment_2: SINGLE CCD READOUT. comment_3: FINE LOCK IS REQUESTED BUT COARSE comment_4: TRACK IS OK IF FINE LOCK GS NOT comment_5: AVAILABLE. ! linenum: 2.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: WFC opmode: IMAGE aperture: W2 sp_element: F284W num_exp: 1 time_per_exp: 10S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 3.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: WFC opmode: IMAGE aperture: W2 sp_element: F336W num_exp: 1 time_per_exp: 10S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 4.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: WFC opmode: IMAGE aperture: W2 sp_element: F439W num_exp: 1 time_per_exp: 6S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 5.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: WFC opmode: IMAGE aperture: W2 sp_element: F555W num_exp: 1 time_per_exp: 1.6S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 6.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: WFC opmode: IMAGE aperture: W2 sp_element: F785LP num_exp: 1 time_per_exp: 6S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 7.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: PC opmode: IMAGE aperture: P6 sp_element: F230W num_exp: 1 time_per_exp: 80S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES req_1: GROUP 7-12 NO GAP; comment_1: SINGLE CCD READOUT. comment_2: FINE LOCK IS DEFAULT BUT COARSE TRACK comment_3: IS ACCEPTABLE IF FINE LOCK GS NOT comment_4: AVAILABLE. ! linenum: 8.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: PC opmode: IMAGE aperture: P6 sp_element: F284W num_exp: 1 time_per_exp: 23S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 9.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: PC opmode: IMAGE aperture: P6 sp_element: F336W num_exp: 1 time_per_exp: 20S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 10.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: PC opmode: IMAGE aperture: P6 sp_element: F439W num_exp: 1 time_per_exp: 10S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 11.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: PC opmode: IMAGE aperture: P6 sp_element: F555W num_exp: 1 time_per_exp: 2S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 12.000 sequence_1: DEFINE sequence_2: A81 targname: A+81D266 config: PC opmode: IMAGE aperture: P6 sp_element: F785LP num_exp: 1 time_per_exp: 8S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 21.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: WFC opmode: IMAGE aperture: W2 sp_element: F230W num_exp: 1 time_per_exp: 14S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES req_1: GROUP 21-32 WITHIN 1D; req_2: GROUP 21-26 NO GAP; req_3: PCS MODE F / 21-26; comment_1: SEQUENCE FOR STAR BD+28D4211. comment_2: SINGLE CCD READOUT. comment_3: FINE LOCK IS REQUESTED BUT COARSE comment_4: TRACK IS ACCEPTABLE IF FINE LOCK GS comment_5: ARE NOT AVAILABLE. ! linenum: 22.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: WFC opmode: IMAGE aperture: W2 sp_element: F284W num_exp: 1 time_per_exp: 3S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 23.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: WFC opmode: IMAGE aperture: W2 sp_element: F336W num_exp: 1 time_per_exp: 3S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 24.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: WFC opmode: IMAGE aperture: W2 sp_element: F439W num_exp: 1 time_per_exp: 1.6S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 25.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: WFC opmode: IMAGE aperture: W2 sp_element: F555W num_exp: 1 time_per_exp: 0.4S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 26.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: WFC opmode: IMAGE aperture: W2 sp_element: F785LP num_exp: 1 time_per_exp: 1.6S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 27.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: PC opmode: IMAGE aperture: P6 sp_element: F230W num_exp: 1 time_per_exp: 26S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES req_1: GROUP 27-32 NO GAP; comment_1: SINGLE CCD READOUT. comment_2: FINE LOCK IS DEFAULT BUT COARSE TRACK comment_3: IS ACCEPTABLE IF FINE LOCK GS ARE NOT comment_4: AVAILABLE. ! linenum: 28.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: PC opmode: IMAGE aperture: P6 sp_element: F284W num_exp: 1 time_per_exp: 7S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 29.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: PC opmode: IMAGE aperture: P6 sp_element: F336W num_exp: 1 time_per_exp: 5S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 30.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: PC opmode: IMAGE aperture: P6 sp_element: F439W num_exp: 1 time_per_exp: 2.6S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 31.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: PC opmode: IMAGE aperture: P6 sp_element: F555W num_exp: 1 time_per_exp: 0.5S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 32.000 sequence_1: DEFINE sequence_2: BD28 targname: BD+28D4211 config: PC opmode: IMAGE aperture: P6 sp_element: F785LP num_exp: 1 time_per_exp: 2.3S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 41.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: WFC opmode: IMAGE aperture: W2 sp_element: F230W num_exp: 1 time_per_exp: 6S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES req_1: GROUP 41-52 WITHIN 1D; req_2: GROUP 41-46 NO GAP; req_3: PCS MODE F / 41-46; comment_1: SEQUENCE FOR STAR BD+75D325. comment_2: SINGLE CCD READOUT. comment_3: FINE LOCK IS REQUESTED BUT COARSE comment_4: TRACK IS ACCEPTABLE IF FINE LOCK GS comment_5: ARE NOT AVAILABLE. ! linenum: 42.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: WFC opmode: IMAGE aperture: W2 sp_element: F284W num_exp: 1 time_per_exp: 1.4S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 43.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: WFC opmode: IMAGE aperture: W2 sp_element: F336W num_exp: 1 time_per_exp: 1.0S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 44.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: WFC opmode: IMAGE aperture: W2 sp_element: F439W num_exp: 1 time_per_exp: 0.6S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 45.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: WFC opmode: IMAGE aperture: W2 sp_element: F555W num_exp: 1 time_per_exp: 0.18S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 46.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: WFC opmode: IMAGE aperture: W2 sp_element: F785LP num_exp: 1 time_per_exp: 0.7S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 47.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: PC opmode: IMAGE aperture: P6 sp_element: F230W num_exp: 1 time_per_exp: 10S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES req_1: GROUP 47-52 NO GAP; comment_1: SINGLE CCD READOUT. comment_2: FINE LOCK IS DEFAULT BUT COARSE TRACK comment_3: IS ACCEPTABLE IF FINE LOCK GS NOT comment_4: AVAILABLE. ! linenum: 48.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: PC opmode: IMAGE aperture: P6 sp_element: F284W num_exp: 1 time_per_exp: 3.0S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 49.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: PC opmode: IMAGE aperture: P6 sp_element: F336W num_exp: 1 time_per_exp: 2.3S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 50.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: PC opmode: IMAGE aperture: P6 sp_element: F439W num_exp: 1 time_per_exp: 1.2S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 51.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: PC opmode: IMAGE aperture: P6 sp_element: F555W num_exp: 1 time_per_exp: 0.23S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 52.000 sequence_1: DEFINE sequence_2: BD75 targname: BD+75D325 config: PC opmode: IMAGE aperture: P6 sp_element: F785LP num_exp: 1 time_per_exp: 0.8S priority: 1 param_1: CR-SPLIT=NO, param_2: PRE-FLASH=YES comment_1: SINGLE CCD READOUT. ! linenum: 100.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 100 OR 101 req_2: OR 102; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; req_5: CYCLE 2/100-138; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. comment_4: FOR ALL TARGETS, COARSE TRACK IS OK comment_5: IF FINE LOCK GS NOT AVAILABLE (LINES comment_6: 100 - 138). ! linenum: 101.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 102.000 sequence_1: USE sequence_2: BD75 ! linenum: 103.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 103 OR 104 OR req_2: 105; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 104.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 105.000 sequence_1: USE sequence_2: BD75 ! linenum: 106.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 106 OR 107 OR req_2: 108; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 107.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 108.000 sequence_1: USE sequence_2: BD75 ! linenum: 109.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 109 OR 110 req_2: OR 111; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 110.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 111.000 sequence_1: USE sequence_2: BD75 ! linenum: 112.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 112 OR 113 req_2: OR 114; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 113.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 114.000 sequence_1: USE sequence_2: BD75 ! linenum: 115.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 115 OR 116 OR req_2: 117; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 116.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 117.000 sequence_1: USE sequence_2: BD75 ! linenum: 118.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 118 OR 119 OR req_2: 120; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 119.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 120.000 sequence_1: USE sequence_2: BD75 ! linenum: 121.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 121 OR 122 req_2: OR 123; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 122.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 123.000 sequence_1: USE sequence_2: BD75 ! linenum: 124.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 124 OR 125 req_2: OR 126; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 125.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 126.000 sequence_1: USE sequence_2: BD75 ! linenum: 127.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 127 OR 128 req_2: OR 129; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 128.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 129.000 sequence_1: USE sequence_2: BD75 ! linenum: 130.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 130 OR 131 req_2: OR 132; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 131.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 132.000 sequence_1: USE sequence_2: BD75 ! linenum: 133.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 133 OR 134 req_2: OR 135; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 134.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 135.000 sequence_1: USE sequence_2: BD75 ! linenum: 136.000 sequence_1: USE sequence_2: A81 req_1: SELECT 1 OF 136 OR 137 OR req_2: 138; req_3: COND IF BD+75D325 NOT AVAILABLE; req_4: COND IF BD+28D4211 NOT AVAILABLE; comment_1: RUN STELLAR MONITOR EVERY FOUR comment_2: WEEKS. SELECT ONE OF THREE comment_3: CANDIDATE STARS. ! linenum: 137.000 sequence_1: USE sequence_2: BD28 req_1: COND IF BD+75D325 NOT AVAILABLE; ! linenum: 138.000 sequence_1: USE sequence_2: BD75 ! ! end of exposure logsheet ! No scan data records found