! File: 4155C.PROP ! Database: PEPDB ! Date: 20-FEB-1994:11:10:40 coverpage: title_1: EXTRAGALACTIC ASTROMETRY AND ASTROPHYSICS title_2: FT0-11,PART 1 OF 2 - CONTINUATION OF 1013, CYCLE 3 sci_cat: QUASARS & AGN sci_subcat: ASTROMETRY proposal_for: GTO/AST longterm: 9 cont_id: 1013 pi_title: DR. pi_fname: WILLIAM pi_mi: H. pi_lname: JEFFERYS pi_inst: UNIVERSITY OF TEXAS AT AUSTIN pi_country: USA pi_phone: (512)471-1455 keywords_1: QUASARS, BL LACS, AGNS, HIPPARCOS, REFERENCE FRAMES keywords_2: FUNDAMENTAL ASTROMETRY, QUASAR INTERNAL MOTION hours_pri: 15.00 hours_par: 15.00 num_pri: 72 fgs: Y pi_position: PROFESSOR ! end of coverpage abstract: line_1: The goal of this project is the determination of the rotation of line_2: the HIPPARCOS Reference Frame with respect to an Extragalactic line_3: Frame. The program will derive the internal optical motions of line_4: extragalactic objects (QSOs, BL Lacs, AGNs) at the +/- 0.002 line_5: arcsecond per year level of accuracy. line_7: 160 SAO stars within the FGSFOV of all selected QSOs, BL Lacs, line_8: and AGNs are included in the HIPPARCOS catalog. Ground based line_9: speckle observations have been used to pre-detect doubles which line_10: would cause problems for the FGS. The FGSs will measure the line_11: relative positions of SAO stars with respect to objects brighter line_12: than 17 mag. Fainter objects will be observed with the WFPC and line_13: FGS together. The objects have been selected in conjunction with line_14: the recommendations of the IAU working group in Radio/Optical line_15: Identifications, and have been selected for compactness and line_16: intensity. Most of the objects are recommended as ultimate line_17: position calibrators. ! ! end of abstract general_form_proposers: lname: JEFFERYS fname: WILLIAM title: DR. mi: H. inst: UNIVERSITY OF TEXAS AT AUSTIN country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: The HIPPARCOS satellite will produce positions, proper motions, line_2: and parallaxes for 100,000 stars with an accuracy of 0.002 line_3: arcseconds in the positions and parallaxes. However, the nature line_4: of the observations means that the HIPPARCOS Instrumental line_5: Coordinate system will have an unknown overall rotation with line_6: respect to an inertial reference frame. The extragalactic line_7: objects define a frame which is very close to being inertial, line_8: differing only by cosmological effects. The goal of these line_9: observations is twofold: first to determine the relative line_10: positions and motions of selected Extragalactic Objects (EGOs) line_11: with respect to the HIPPARCOS reference frrame, and, by line_12: inverting the observations, infer the rotation of the HIPPARCOS line_13: frame, as part of the Astrometry Team GTO time, and second, by line_14: using the Planetary Camera and guiding FGSs in the "Transit line_15: Circle" mode, obtain structural information about the EGOs as line_16: part of the WF/PC GTO time. ! question: 2 section: 2 line_1: Several methods have been proposed to "stop" the HIPPARCOS frame line_2: rotation. The Space Telescope observations have the possibility line_3: to provide the most accurate of these determinations, possibly line_4: to the level of 0.0002 arcsec/year accuracy. Such a line_5: determination would make a significant impact on our knowledge line_6: of the motions of groups of stars (which now must have line_7: precession removed) and would provide a more stable reference line_8: frame against which to measure the motions of solar system line_9: objects, for orbital and relativity studies. line_11: Because the observations will be made over the lifetime of ST, line_12: internal apparent motions within the EGO cores will be observed line_13: or not observed at a level which can only be obtained at radio line_14: wavelengths using VLBI at the present time. The study of time line_15: variable optical positions will bring a new aspect to bear on line_16: the study of these objects. line_18: Speckle observations of candidate HIPPARCOS stars were used to line_19: determine which ones are multiple and hence unsuitable for line_20: these studies. Franz and McAlister used the KPNO 4-meter and line_21: the Perkins telescope in the northern hemisphere, and Argue line_22: and Morgan used the AAT in the southern hemisphere to obtain line_23: observations. ! question: 3 section: 1 line_1: Observations will be made with the "Transit Circle" mode line_2: using PC-8 and the astrometric data from the guiding FGSs line_3: simultaneously. The spacecraft must be oriented so that line_4: the EGO and HIP stars are aligned for appropriate use of line_5: the guide stars. ! question: 4 section: 1 line_1: Because of astrometric limitations of the atmosphere, ground- line_2: based observations are capable of only about 0.01 arcsecond line_3: accuracy in measuring the relative positions between two line_4: objects separated by more than an isoplanatic patch. These line_5: observations require the longest focus telescopes and detailed line_6: analysis of the optical distortions. This accuracy has only line_7: been achieved in a handful of fields. ST will provide single line_8: observations at the 0.002 arcsecond level, and should allow line_9: an order of magnitude increase over the ground-based line_10: observations. The standard method of ground-based observation line_11: is still the transit circle, so relative optical positions of line_12: the HIPPARCOS stars with respect to EGOs will not be measured line_13: from the ground. Radio positions using VLBI and VLA line_14: observations of RS CVn stars will be made to relate the line_15: HIPPARCOS frame to EGOs indirectly. However, ST has the line_16: capability to measure this rotation directly, without the line_17: problem of relating the optical and radio emission regions. line_18: The possible transfer of the radio reference frame to the line_19: optical will of necessity require such assumptions about line_20: the EGOs, but the use of at least 50 objects will allow line_21: statistical statements to be made which will be of great line_22: astrophysical interest. ! question: 5 section: 1 line_1: In order to minimize the impact of power constraints, the dates line_2: of observations were picked so that the nominal FGS orientation line_3: is aligned with the EGO-HIP star position angle, and off-nominal line_4: rolls are not required. However, this constraint makes the line_5: observations time-critical. Because the goal is to measure line_6: motions, the repeat observations must be made within multiples line_7: of one year within two days, in order not to contaminate the line_8: motions with the parallaxes of other HIPPARCOS stars. ! question: 6 section: 1 line_1: The astrometric data will be reduced at STScI or the University line_2: of Texas using the SDAS/ADRS Software. The reduction of WF/PC line_3: data will use the SDAF/WF-PC Software. Analysis will be line_4: performed as appropriate. In particular, the reduced poitional line_5: data will be transmitted to the HIPPARCOS project, and the line_6: analysis will be performed in conjunction with that project. line_8: The PC observations using the F606W and F658N filters require line_9: the calibrations derived from the first 3 exposure log sheet line_10: lines of GTO proposal 1013. ! question: 8 section: 1 line_1: 160 HIPPARCOS stars have been identified within 10 arcminutes of line_2: 90 EGOs. During the GTO time, we expect to make three line_3: observations of 40 HIP star-EGO pairs, two observations of 40 line_4: more, and one observation of 40 more, for a total of 120 object line_5: pairs. We have included all the candidate objects, but expect line_6: scheduling constraints to limit which objects will be observed. line_8: The success of the program depends on obtaining essentially all line_9: of the priority one observations. Priority 2 solutions will line_10: strengthen the solution. Priority 3 observations are non- line_11: critical and should be treated as "fillers." ! question: 13 section: 1 line_1: Relative positions and motions of HIPPARCOS stars will be made line_2: with respect to Extragalactic Objects (EGOs), using the Fine line_3: Guidance Sensors and the Planetary Camera in the "transit line_4: circle" mode. The data will provide information line_5: on structure changes in the cores of these objects. The line_6: position measurements will be used to derive the overall line_7: rotation of the HIPPARCOS reference frame with respect to line_8: the extragalactic reference frame. ! !end of general form text general_form_address: lname: HEMENWAY fname: PAUL mi: D title: DR. category: CON inst: UNIVERSITY OF TEXAS AT AUSTIN addr_1: DEPARTMENT OF ASTRONOMY addr_2: UNIVERSITY OF TEXAS AT AUSTIN city: AUSTIN state: TX zip: 78712 country: USA phone: (512)471-3431 ! lname: JEFFERYS fname: WILLIAM mi: H. title: DR. category: PI inst: UNIVERSITY OF TEXAS AT AUSTIN addr_1: DEPARTMENT OF ASTRONOMY addr_2: UNIVERSITY OF TEXAS AT AUSTIN city: AUSTIN state: TX zip: 78712 country: USA phone: (512)471-1455 ! ! end of general_form_address records fixed_targets: targnum: 120 name_1: POINT0111+021INCA221-4 descr_1: J,701,707 pos_1: RA = 18.5137567D +/- .0008D, pos_2: DEC = 2.1708877D +/- .0008D equinox: 2000 ! targnum: 121 name_1: 0111+021INCA221-4 descr_1: E pos_1: RA = 18.4297703D +/- .0008D, pos_2: DEC = 2.3714668D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.3 +/- 1 ! targnum: 122 name_1: INCA221-4 descr_1: A pos_1: RA = 18.6676823D +/- .0008D, pos_2: DEC = 2.2996128D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: -0.000900 dec_pm_val: -0.0030 fluxnum_1: 1 fluxval_1: V=9.1 +/- 1 ! targnum: 123 name_1: 120-REF descr_1: J,701 pos_1: RA = 18.4592223D +/- .0008D, pos_2: DEC = 2.3689028D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.41 +/- 1 ! targnum: 124 name_1: 121-REF descr_1: J,701 pos_1: RA = 18.6270023D +/- .0008D, pos_2: DEC = 2.3092028D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.12 +/- 1 ! targnum: 125 name_1: 122-REF descr_1: J,701 pos_1: RA = 18.6074523D +/- .0008D, pos_2: DEC = 2.3352828D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.26 +/- 1 ! targnum: 220 name_1: POINT0134+329INCA221-9 descr_1: J,701,707 pos_1: RA = 24.6444896D +/- .0008D, pos_2: DEC = 33.0745540D +/- .0008D equinox: 2000 ! targnum: 221 name_1: 0134+329INCA221-9 descr_1: E pos_1: RA = 24.4217275D +/- .0008D, pos_2: DEC = 33.1597521D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.2 +/- 1 ! targnum: 222 name_1: INCA221-9 descr_1: A pos_1: RA = 24.4227604D +/- .0008D, pos_2: DEC = 33.0300731D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.5 +/- 1 ! targnum: 223 name_1: 220-REF descr_1: J,701 pos_1: RA = 24.4629704D +/- .0008D, pos_2: DEC = 33.1887031D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.92 +/- 1 ! targnum: 224 name_1: 221-REF descr_1: J,701 pos_1: RA = 24.4085804D +/- .0008D, pos_2: DEC = 33.1258831D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.59 +/- 1 ! targnum: 225 name_1: 222-REF descr_1: J,701 pos_1: RA = 24.4376804D +/- .0008D, pos_2: DEC = 33.1972531D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.49 +/- 1 ! targnum: 320 name_1: POINT0150-334INCA221-12 descr_1: J,701,707 pos_1: RA = 28.1141658D +/- .0008D, pos_2: DEC = -33.0672032D +/- .0008D equinox: 2000 ! targnum: 321 name_1: 0150-334INCA221-12 descr_1: E pos_1: RA = 28.2911673D +/- .0008D, pos_2: DEC = -33.1739947D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 322 name_1: INCA221-12 descr_1: A pos_1: RA = 28.17948D +/- .0008D, pos_2: DEC = -33.24055D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=8.9 +/- 1 ! targnum: 323 name_1: 320-REF descr_1: J,701 pos_1: RA = 28.13309D +/- .0008D, pos_2: DEC = -33.28545D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.57 +/- 1 ! targnum: 324 name_1: 321-REF descr_1: J,701 pos_1: RA = 28.34404D +/- .0008D, pos_2: DEC = -33.11881D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.67 +/- 1 ! targnum: 325 name_1: 322-REF descr_1: J,701 pos_1: RA = 28.22687D +/- .0008D, pos_2: DEC = -33.22812D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.9 +/- 1 ! targnum: 420 name_1: POINT0153+744INCA221-15 descr_1: J,701,707 pos_1: RA = 30.0848370D +/- .0008D, pos_2: DEC = 74.6756946D +/- .0008D equinox: 2000 ! targnum: 421 name_1: 0153+744INCA221-15 descr_1: E pos_1: RA = 29.3954393D +/- .0008D, pos_2: DEC = 74.7120541D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16 +/- 1 ! targnum: 422 name_1: INCA221-15 descr_1: A pos_1: RA = 29.4264688D +/- .0008D, pos_2: DEC = 74.6248634D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10 +/- 1 ! targnum: 423 name_1: 420-REF descr_1: J,701 pos_1: RA = 29.3335889D +/- .0008D, pos_2: DEC = 74.6022834D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.02 +/- 1 ! targnum: 424 name_1: 421-REF descr_1: J,701 pos_1: RA = 29.2652689D +/- .0008D, pos_2: DEC = 74.6216633D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.43 +/- 1 ! targnum: 425 name_1: 422-REF descr_1: J,701 pos_1: RA = 29.4605587D +/- .0008D, pos_2: DEC = 74.7706334D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.77 +/- 1 ! targnum: 520 name_1: POINT0237-233INCA221-18 descr_1: J,701,707 pos_1: RA = 39.8926675D +/- .0008D, pos_2: DEC = -23.2832145D +/- .0008D equinox: 2000 ! targnum: 521 name_1: 0237-233INCA221-18 descr_1: E pos_1: RA = 40.0335006D +/- .0008D, pos_2: DEC = -23.1550403D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.6 +/- 1 ! targnum: 522 name_1: INCA221-18 descr_1: A pos_1: RA = 39.8809625D +/- .0008D, pos_2: DEC = -23.0958165D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11 +/- 1 ! targnum: 523 name_1: 520-REF descr_1: J,701 pos_1: RA = 39.9551045D +/- .0008D, pos_2: DEC = -23.1040358D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.52 +/- 1 ! targnum: 524 name_1: 521-REF descr_1: J,701 pos_1: RA = 39.8809625D +/- .0008D, pos_2: DEC = -23.0958165D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11 +/- 1 ! targnum: 525 name_1: 522-REF descr_1: J,701 pos_1: RA = 39.9551045D +/- .0008D, pos_2: DEC = -23.1040358D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.52 +/- 1 ! targnum: 620 name_1: POINT0241+622INCA221-20 descr_1: J,701,707 pos_1: RA = 41.6653007D +/- .0008D, pos_2: DEC = 62.5177207D +/- .0008D equinox: 2000 ! targnum: 621 name_1: 0241+622INCA221-20 descr_1: E pos_1: RA = 41.2427409D +/- .0008D, pos_2: DEC = 62.4683585D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.4 +/- 1 ! targnum: 622 name_1: INCA221-20 descr_1: A pos_1: RA = 41.2856427D +/- .0008D, pos_2: DEC = 62.5919243D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.5 +/- 1 ! targnum: 623 name_1: 620-REF descr_1: J,701 pos_1: RA = 41.2549228D +/- .0008D, pos_2: DEC = 62.4534743D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.65 +/- 1 ! targnum: 624 name_1: 621-REF descr_1: J,701 pos_1: RA = 41.2045028D +/- .0008D, pos_2: DEC = 62.5216343D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.59 +/- 1 ! targnum: 625 name_1: 622-REF descr_1: J,701 pos_1: RA = 41.3465727D +/- .0008D, pos_2: DEC = 62.6740243D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.05 +/- 1 ! targnum: 720 name_1: POINT0312-770INCA221-22 descr_1: J,701,707 pos_1: RA = 47.4192033D +/- .0008D, pos_2: DEC = -76.9982791D +/- .0008D equinox: 2000 ! targnum: 721 name_1: 0312-770INCA221-22 descr_1: E pos_1: RA = 47.9796993D +/- .0008D, pos_2: DEC = -76.864426D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.9 +/- 1 ! targnum: 722 name_1: INCA221-22 descr_1: A pos_1: RA = 48.267778D +/- .0008D, pos_2: DEC = -77.0289751D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9 +/- 1 ! targnum: 723 name_1: 720-REF descr_1: J,701 pos_1: RA = 48.027595D +/- .0008D, pos_2: DEC = -76.862825D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.61 +/- 1 ! targnum: 724 name_1: 721-REF descr_1: J,701 pos_1: RA = 48.3369155D +/- .0008D, pos_2: DEC = -76.984835D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.68 +/- 1 ! targnum: 725 name_1: 722-REF descr_1: J,701 pos_1: RA = 48.2333178D +/- .0008D, pos_2: DEC = -76.9024152D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.25 +/- 1 ! targnum: 820 name_1: POINT0454+844INCA221-31 descr_1: J,701,707 pos_1: RA = 76.5775692D +/- .0008D, pos_2: DEC = 84.7288335D +/- .0008D equinox: 2000 ! targnum: 821 name_1: 0454+844INCA221-31 descr_1: E pos_1: RA = 77.1775463D +/- .0008D, pos_2: DEC = 84.5344889D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 822 name_1: INCA221-31 descr_1: A pos_1: RA = 75.1804548D +/- .0008D, pos_2: DEC = 84.574968D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10 +/- 1 ! targnum: 823 name_1: 820-REF descr_1: J,701 pos_1: RA = 75.8329149D +/- .0008D, pos_2: DEC = 84.5533581D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.82 +/- 1 ! targnum: 824 name_1: 821-REF descr_1: J,701 pos_1: RA = 77.0092751D +/- .0008D, pos_2: DEC = 84.5146683D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.48 +/- 1 ! targnum: 825 name_1: 822-REF descr_1: J,701 pos_1: RA = 76.4756946D +/- .0008D, pos_2: DEC = 84.5548082D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.35 +/- 1 ! targnum: 830 name_1: POINT0537-441INCA221-35 descr_1: J,701,707 pos_1: RA = 84.6071697D +/- .0008D, pos_2: DEC = -44.2778947D +/- .0008D equinox: 2000 ! targnum: 831 name_1: 0537-441INCA221-35 descr_1: E pos_1: RA = 84.7072796D +/- .0008D, pos_2: DEC = -44.0859262D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.5 +/- 1 ! targnum: 832 name_1: INCA221-35 descr_1: A pos_1: RA = 84.5535117D +/- .0008D, pos_2: DEC = -44.0904882D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: 0.003800 dec_pm_val: 0.0230 fluxnum_1: 1 fluxval_1: V=9.1 +/- 1 ! targnum: 833 name_1: 920-REF descr_1: J,701 pos_1: RA = 84.7686998D +/- .0008D, pos_2: DEC = -44.1106707D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.99 +/- 1 ! targnum: 834 name_1: 921-REF descr_1: J,701 pos_1: RA = 84.6819198D +/- .0008D, pos_2: DEC = -44.0846407D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.72 +/- 1 ! targnum: 835 name_1: 922-REF descr_1: J,701 pos_1: RA = 84.4919098D +/- .0008D, pos_2: DEC = -44.0737907D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.23 +/- 1 ! targnum: 836 name_1: POINT0537-441INCA221-36 descr_1: J,701,707 pos_1: RA = 84.6069425D +/- .0008D, pos_2: DEC = -44.2764332D +/- .0008D equinox: 2000 ! targnum: 837 name_1: 0537-441INCA221-36 descr_1: E pos_1: RA = 84.7072796D +/- .0008D, pos_2: DEC = -44.0859262D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.5 +/- 1 ! targnum: 838 name_1: INCA221-36 descr_1: A pos_1: RA = 84.7674412D +/- .0008D, pos_2: DEC = -44.1103844D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.7 +/- 1 ! targnum: 839 name_1: 940-REF descr_1: J,701 pos_1: RA = 84.8371498D +/- .0008D, pos_2: DEC = -44.1651707D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.06 +/- 1 ! targnum: 840 name_1: 941-REF descr_1: J,701 pos_1: RA = 84.7321698D +/- .0008D, pos_2: DEC = -44.1056207D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.54 +/- 1 ! targnum: 841 name_1: 942-REF descr_1: J,701 pos_1: RA = 84.6819198D +/- .0008D, pos_2: DEC = -44.0846407D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.72 +/- 1 ! targnum: 842 name_1: POINT0607-157INCA221-37 descr_1: J,701,707 pos_1: RA = 92.3663745D +/- .0008D, pos_2: DEC = -15.8911313D +/- .0008D equinox: 2000 ! targnum: 843 name_1: 0607-157INCA221-37 descr_1: E pos_1: RA = 92.4200957D +/- .0008D, pos_2: DEC = -15.7111384D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=17 +/- 1 ! targnum: 844 name_1: INCA221-37 descr_1: A pos_1: RA = 92.2801857D +/- .0008D, pos_2: DEC = -15.7018397D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: -0.000400 dec_pm_val: -0.0130 fluxnum_1: 1 fluxval_1: V=7.67 +/- 1 ! targnum: 845 name_1: 1020-REF descr_1: J,701 pos_1: RA = 92.2929752D +/- .0008D, pos_2: DEC = -15.7079796D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.79 +/- 1 ! targnum: 846 name_1: 1021-REF descr_1: J,701 pos_1: RA = 92.4829834D +/- .0008D, pos_2: DEC = -15.7349295D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.36 +/- 1 ! targnum: 847 name_1: 1022-REF descr_1: J,701 pos_1: RA = 92.3542827D +/- .0008D, pos_2: DEC = -15.6722496D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.41 +/- 1 ! targnum: 848 name_1: POINT0607-157INCA221-38 descr_1: J,701,707 pos_1: RA = 92.3629085D +/- .0008D, pos_2: DEC = -15.9011314D +/- .0008D equinox: 2000 ! targnum: 849 name_1: 0607-157INCA221-38 descr_1: E pos_1: RA = 92.4200939D +/- .0008D, pos_2: DEC = -15.7111385D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=17 +/- 1 ! targnum: 850 name_1: INCA221-38 descr_1: A pos_1: RA = 92.5557046D +/- .0008D, pos_2: DEC = -15.8924297D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.2 +/- 1 ! targnum: 851 name_1: 1040-REF descr_1: J,701 pos_1: RA = 92.5528146D +/- .0008D, pos_2: DEC = -15.7793397D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.21 +/- 1 ! targnum: 852 name_1: 1041-REF descr_1: J,701 pos_1: RA = 92.4829846D +/- .0008D, pos_2: DEC = -15.7349297D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.36 +/- 1 ! targnum: 853 name_1: 1042-REF descr_1: J,701 pos_1: RA = 92.5727346D +/- .0008D, pos_2: DEC = -15.8642797D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.29 +/- 1 ! targnum: 854 name_1: POINT0637-752INCA221-39 descr_1: J,701,707 pos_1: RA = 99.0987737D +/- .0008D, pos_2: DEC = -75.0653827D +/- .0008D equinox: 2000 ! targnum: 855 name_1: 0637-752INCA221-39 descr_1: E pos_1: RA = 98.9439373D +/- .0008D, pos_2: DEC = -75.2714076D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.7 +/- 1 ! targnum: 856 name_1: INCA221-39 descr_1: A pos_1: RA = 98.710961D +/- .0008D, pos_2: DEC = -75.2188688D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: -0.001400 dec_pm_val: -0.0200 fluxnum_1: 1 fluxval_1: V=9 +/- 1 ! targnum: 857 name_1: 1120-REF descr_1: J,701 pos_1: RA = 98.443981D +/- .0008D, pos_2: DEC = -75.1983489D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.28 +/- 1 ! targnum: 858 name_1: 1121-REF descr_1: J,701 pos_1: RA = 98.9659111D +/- .0008D, pos_2: DEC = -75.2578388D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.13 +/- 1 ! targnum: 859 name_1: 1122-REF descr_1: J,701 pos_1: RA = 98.657601D +/- .0008D, pos_2: DEC = -75.2067289D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.33 +/- 1 ! targnum: 860 name_1: POINT0736+017INCA221-42 descr_1: J,701,707 pos_1: RA = 114.6347687D +/- .0008D, pos_2: DEC = 1.5762036D +/- .0008D equinox: 2000 ! targnum: 861 name_1: 0736+017INCA221-42 descr_1: E pos_1: RA = 114.82484D +/- .0008D, pos_2: DEC = 1.617879D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 862 name_1: INCA221-42 descr_1: A pos_1: RA = 114.6806922D +/- .0008D, pos_2: DEC = 1.7788432D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10 +/- 1 ! targnum: 863 name_1: 1220-REF descr_1: J,701 pos_1: RA = 114.7340122D +/- .0008D, pos_2: DEC = 1.7217132D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.47 +/- 1 ! targnum: 864 name_1: 1221-REF descr_1: J,701 pos_1: RA = 114.8091822D +/- .0008D, pos_2: DEC = 1.7032232D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.89 +/- 1 ! targnum: 865 name_1: 1222-REF descr_1: J,701 pos_1: RA = 114.6781022D +/- .0008D, pos_2: DEC = 1.7886932D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.09 +/- 1 ! targnum: 866 name_1: POINT0743-673INCA221-43 descr_1: J,701,707 pos_1: RA = 116.1823771D +/- .0008D, pos_2: DEC = -67.2727331D +/- .0008D equinox: 2000 ! targnum: 867 name_1: 0743-673INCA221-43 descr_1: E pos_1: RA = 115.8847164D +/- .0008D, pos_2: DEC = -67.4396749D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.4 +/- 1 ! targnum: 868 name_1: INCA221-43 descr_1: A pos_1: RA = 116.5134189D +/- .0008D, pos_2: DEC = -67.4327066D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: 0.000400 dec_pm_val: 0.0070 fluxnum_1: 1 fluxval_1: V=7.8 +/- 1 ! targnum: 869 name_1: 1320-REF descr_1: J,701 pos_1: RA = 115.880959D +/- .0008D, pos_2: DEC = -67.4516867D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.74 +/- 1 ! targnum: 870 name_1: 1321-REF descr_1: J,701 pos_1: RA = 116.068599D +/- .0008D, pos_2: DEC = -67.4860966D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.49 +/- 1 ! targnum: 871 name_1: 1322-REF descr_1: J,701 pos_1: RA = 116.4886089D +/- .0008D, pos_2: DEC = -67.4565266D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.33 +/- 1 ! targnum: 872 name_1: POINT0818-128INCA221-44 descr_1: J,701,707 pos_1: RA = 125.0806043D +/- .0008D, pos_2: DEC = -12.8706473D +/- .0008D equinox: 2000 ! targnum: 873 name_1: 0818-128INCA221-44 descr_1: E pos_1: RA = 125.2390808D +/- .0008D, pos_2: DEC = -12.9830092D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16 +/- 1 ! targnum: 874 name_1: INCA221-44 descr_1: A pos_1: RA = 125.2882339D +/- .0008D, pos_2: DEC = -12.8628056D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.4 +/- 1 ! targnum: 875 name_1: 1420-REF descr_1: J,701 pos_1: RA = 125.2173439D +/- .0008D, pos_2: DEC = -12.9889256D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.54 +/- 1 ! targnum: 876 name_1: 1421-REF descr_1: J,701 pos_1: RA = 125.2961139D +/- .0008D, pos_2: DEC = -12.8426456D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.21 +/- 1 ! targnum: 877 name_1: 1422-REF descr_1: J,701 pos_1: RA = 125.2934339D +/- .0008D, pos_2: DEC = -12.8633556D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.87 +/- 1 ! targnum: 878 name_1: POINT0826-373INCA221-45 descr_1: J,701,707 pos_1: RA = 126.8282711D +/- .0008D, pos_2: DEC = -37.6498474D +/- .0008D equinox: 2000 ! targnum: 879 name_1: 0826-373INCA221-45 descr_1: E pos_1: RA = 127.0198269D +/- .0008D, pos_2: DEC = -37.5183357D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16 +/- 1 ! targnum: 880 name_1: INCA221-45 descr_1: A pos_1: RA = 127.0506971D +/- .0008D, pos_2: DEC = -37.7297754D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: -0.001900 dec_pm_val: 0.0130 fluxnum_1: 1 fluxval_1: V=8.9 +/- 1 ! targnum: 881 name_1: 1520-REF descr_1: J,701 pos_1: RA = 127.0919571D +/- .0008D, pos_2: DEC = -37.5901754D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.62 +/- 1 ! targnum: 882 name_1: 1521-REF descr_1: J,701 pos_1: RA = 127.0835771D +/- .0008D, pos_2: DEC = -37.7414754D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.47 +/- 1 ! targnum: 883 name_1: 1522-REF descr_1: J,701 pos_1: RA = 127.0028371D +/- .0008D, pos_2: DEC = -37.5029954D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.06 +/- 1 ! targnum: 884 name_1: POINT0826-373INCA221-46 descr_1: J,701,707 pos_1: RA = 126.9656574D +/- .0008D, pos_2: DEC = -37.3232534D +/- .0008D equinox: 2000 ! targnum: 885 name_1: 0826-373INCA221-46 descr_1: E pos_1: RA = 127.0198269D +/- .0008D, pos_2: DEC = -37.5183357D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16 +/- 1 ! targnum: 886 name_1: INCA221-46 descr_1: A pos_1: RA = 127.2172771D +/- .0008D, pos_2: DEC = -37.3546654D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.4 +/- 1 ! targnum: 887 name_1: 1540-REF descr_1: J,701 pos_1: RA = 127.2367771D +/- .0008D, pos_2: DEC = -37.3863654D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.66 +/- 1 ! targnum: 888 name_1: 1541-REF descr_1: J,701 pos_1: RA = 127.1334271D +/- .0008D, pos_2: DEC = -37.4880954D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.27 +/- 1 ! targnum: 889 name_1: 1542-REF descr_1: J,701 pos_1: RA = 127.0028371D +/- .0008D, pos_2: DEC = -37.5029954D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.06 +/- 1 ! targnum: 890 name_1: POINT0836+710INCA221-49 descr_1: J,701,707 pos_1: RA = 129.9271438D +/- .0008D, pos_2: DEC = 70.6461283D +/- .0008D equinox: 2000 ! targnum: 891 name_1: 0836+710INCA221-49 descr_1: E pos_1: RA = 130.3488555D +/- .0008D, pos_2: DEC = 70.8232476D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 892 name_1: INCA221-49 descr_1: A pos_1: RA = 129.5041323D +/- .0008D, pos_2: DEC = 70.8267153D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10 +/- 1 ! targnum: 893 name_1: 1620-REF descr_1: J,701 pos_1: RA = 129.9492456D +/- .0008D, pos_2: DEC = 70.8484449D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.73 +/- 1 ! targnum: 894 name_1: 1621-REF descr_1: J,701 pos_1: RA = 129.8672356D +/- .0008D, pos_2: DEC = 70.8433049D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.25 +/- 1 ! targnum: 895 name_1: 1622-REF descr_1: J,701 pos_1: RA = 129.7995156D +/- .0008D, pos_2: DEC = 70.8239449D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15 +/- 1 ! targnum: 896 name_1: POINT0851+202INCA221-50 descr_1: J,701,707 pos_1: RA = 133.7026268D +/- .0008D, pos_2: DEC = 20.3099698D +/- .0008D equinox: 2000 ! targnum: 897 name_1: 0851+202INCA221-50 descr_1: E pos_1: RA = 133.7033759D +/- .0008D, pos_2: DEC = 20.1087588D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14 +/- 1 ! targnum: 898 name_1: INCA221-50 descr_1: A pos_1: RA = 133.5026525D +/- .0008D, pos_2: DEC = 20.2304426D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: -0.003200 dec_pm_val: -0.0070 fluxnum_1: 1 fluxval_1: V=8.5 +/- 1 ! targnum: 899 name_1: 1720-REF descr_1: J,701 pos_1: RA = 133.7301004D +/- .0008D, pos_2: DEC = 20.0949953D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.13 +/- 1 ! targnum: 900 name_1: 1721-REF descr_1: J,701 pos_1: RA = 133.7268604D +/- .0008D, pos_2: DEC = 20.1036553D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.61 +/- 1 ! targnum: 901 name_1: 1722-REF descr_1: J,701 pos_1: RA = 133.5525304D +/- .0008D, pos_2: DEC = 20.1547453D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.06 +/- 1 ! targnum: 902 name_1: POINT0912+297INCA221-53 descr_1: J,701,707 pos_1: RA = 139.1270235D +/- .0008D, pos_2: DEC = 29.7208858D +/- .0008D equinox: 2000 ! targnum: 903 name_1: 0912+297INCA221-53 descr_1: E pos_1: RA = 138.9679685D +/- .0008D, pos_2: DEC = 29.5566248D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.3 +/- 1 ! targnum: 904 name_1: INCA221-53 descr_1: A pos_1: RA = 138.888018D +/- .0008D, pos_2: DEC = 29.792606D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.5 +/- 1 ! targnum: 905 name_1: 1820-REF descr_1: J,701 pos_1: RA = 138.8981396D +/- .0008D, pos_2: DEC = 29.7230057D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.57 +/- 1 ! targnum: 906 name_1: 1821-REF descr_1: J,701 pos_1: RA = 138.9477596D +/- .0008D, pos_2: DEC = 29.6224958D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.83 +/- 1 ! targnum: 907 name_1: 1822-REF descr_1: J,701 pos_1: RA = 138.9747496D +/- .0008D, pos_2: DEC = 29.5444658D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.26 +/- 1 ! targnum: 908 name_1: POINT0955+326INCA221-56 descr_1: J,701,707 pos_1: RA = 149.8260978D +/- .0008D, pos_2: DEC = 32.4104328D +/- .0008D equinox: 2000 ! targnum: 909 name_1: 0955+326INCA221-56 descr_1: E pos_1: RA = 149.5871521D +/- .0008D, pos_2: DEC = 32.4006493D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.8 +/- 1 ! targnum: 910 name_1: INCA221-56 descr_1: A pos_1: RA = 149.6898591D +/- .0008D, pos_2: DEC = 32.585617D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.2 +/- 1 ! targnum: 911 name_1: 1920-REF descr_1: J,701 pos_1: RA = 149.57643D +/- .0008D, pos_2: DEC = 32.4762866D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.38 +/- 1 ! targnum: 912 name_1: 1921-REF descr_1: J,701 pos_1: RA = 149.56042D +/- .0008D, pos_2: DEC = 32.3959466D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.93 +/- 1 ! targnum: 913 name_1: 1922-REF descr_1: J,701 pos_1: RA = 149.58858D +/- .0008D, pos_2: DEC = 32.3697566D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.73 +/- 1 ! targnum: 914 name_1: POINT0955+326INCA221-57 descr_1: J,701,707 pos_1: RA = 149.7468751D +/- .0008D, pos_2: DEC = 32.2471055D +/- .0008D equinox: 2000 ! targnum: 915 name_1: 0955+326INCA221-57 descr_1: E pos_1: RA = 149.5871521D +/- .0008D, pos_2: DEC = 32.4006493D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.8 +/- 1 ! targnum: 916 name_1: INCA221-57 descr_1: A pos_1: RA = 149.7955638D +/- .0008D, pos_2: DEC = 32.4389656D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: -0.001500 dec_pm_val: -0.0040 fluxnum_1: 1 fluxval_1: V=9.4 +/- 1 ! targnum: 917 name_1: 1940-REF descr_1: J,701 pos_1: RA = 149.68749D +/- .0008D, pos_2: DEC = 32.4609566D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.36 +/- 1 ! targnum: 918 name_1: 1941-REF descr_1: J,701 pos_1: RA = 149.79344D +/- .0008D, pos_2: DEC = 32.4591466D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.9 +/- 1 ! targnum: 919 name_1: 1942-REF descr_1: J,701 pos_1: RA = 149.58858D +/- .0008D, pos_2: DEC = 32.3697566D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.73 +/- 1 ! targnum: 920 name_1: POINT1020-103INCA221-58 descr_1: J,701,707 pos_1: RA = 155.7727867D +/- .0008D, pos_2: DEC = -10.4829016D +/- .0008D equinox: 2000 ! targnum: 921 name_1: 1020-103INCA221-58 descr_1: E pos_1: RA = 155.635765D +/- .0008D, pos_2: DEC = -10.6283913D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 922 name_1: INCA221-58 descr_1: A pos_1: RA = 155.5772859D +/- .0008D, pos_2: DEC = -10.5361335D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.8 +/- 1 ! targnum: 923 name_1: 2020-REF descr_1: J,701 pos_1: RA = 155.545203D +/- .0008D, pos_2: DEC = -10.5003731D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.34 +/- 1 ! targnum: 924 name_1: 2021-REF descr_1: J,701 pos_1: RA = 155.603043D +/- .0008D, pos_2: DEC = -10.5486931D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.25 +/- 1 ! targnum: 925 name_1: 2022-REF descr_1: J,701 pos_1: RA = 155.688723D +/- .0008D, pos_2: DEC = -10.641413D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.96 +/- 1 ! targnum: 926 name_1: POINT1038+064INCA221-59 descr_1: J,701,707 pos_1: RA = 160.2001625D +/- .0008D, pos_2: DEC = 6.3562570D +/- .0008D equinox: 2000 ! targnum: 927 name_1: 1038+064INCA221-59 descr_1: E pos_1: RA = 160.3208603D +/- .0008D, pos_2: DEC = 6.1711569D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.8 +/- 1 ! targnum: 928 name_1: INCA221-59 descr_1: A pos_1: RA = 160.053133D +/- .0008D, pos_2: DEC = 6.2033548D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.2 +/- 1 ! targnum: 929 name_1: 2120-REF descr_1: J,701 pos_1: RA = 160.2873522D +/- .0008D, pos_2: DEC = 6.1503972D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.37 +/- 1 ! targnum: 930 name_1: 2121-REF descr_1: J,701 pos_1: RA = 160.0838322D +/- .0008D, pos_2: DEC = 6.2239972D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.63 +/- 1 ! targnum: 931 name_1: 2122-REF descr_1: J,701 pos_1: RA = 160.1744122D +/- .0008D, pos_2: DEC = 6.1474672D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.18 +/- 1 ! targnum: 932 name_1: POINT1038+064INCA221-60 descr_1: J,701,707 pos_1: RA = 160.4079760D +/- .0008D, pos_2: DEC = 5.9721940D +/- .0008D equinox: 2000 ! targnum: 933 name_1: 1038+064INCA221-60 descr_1: E pos_1: RA = 160.3208603D +/- .0008D, pos_2: DEC = 6.1711569D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.8 +/- 1 ! targnum: 934 name_1: INCA221-60 descr_1: A pos_1: RA = 160.2549507D +/- .0008D, pos_2: DEC = 6.1063499D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.9 +/- 1 ! targnum: 935 name_1: 2140-REF descr_1: J,701 pos_1: RA = 160.3090622D +/- .0008D, pos_2: DEC = 6.1542472D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.09 +/- 1 ! targnum: 936 name_1: 2141-REF descr_1: J,701 pos_1: RA = 160.2380822D +/- .0008D, pos_2: DEC = 6.0303172D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.19 +/- 1 ! targnum: 937 name_1: 2142-REF descr_1: J,701 pos_1: RA = 160.2873522D +/- .0008D, pos_2: DEC = 6.1503972D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.37 +/- 1 ! targnum: 938 name_1: POINT1116-462INCA221-64 descr_1: J,701,707 pos_1: RA = 169.3884969D +/- .0008D, pos_2: DEC = -46.7263498D +/- .0008D equinox: 2000 ! targnum: 939 name_1: 1116-462INCA221-64 descr_1: E pos_1: RA = 169.6115234D +/- .0008D, pos_2: DEC = -46.5710078D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=17 +/- 1 ! targnum: 940 name_1: INCA221-64 descr_1: A pos_1: RA = 169.2450997D +/- .0008D, pos_2: DEC = -46.5317842D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=8.4 +/- 1 ! targnum: 941 name_1: 2240-REF descr_1: J,701 pos_1: RA = 169.2451839D +/- .0008D, pos_2: DEC = -46.5396925D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.89 +/- 1 ! targnum: 942 name_1: 2241-REF descr_1: J,701 pos_1: RA = 169.5925839D +/- .0008D, pos_2: DEC = -46.5948325D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.55 +/- 1 ! targnum: 943 name_1: 2242-REF descr_1: J,701 pos_1: RA = 169.5544639D +/- .0008D, pos_2: DEC = -46.5488525D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.56 +/- 1 ! targnum: 944 name_1: POINT1116-462INCA221-65 descr_1: J,701,707 pos_1: RA = 169.2986289D +/- .0008D, pos_2: DEC = -46.5406753D +/- .0008D equinox: 2000 ! targnum: 945 name_1: 1116-462INCA221-65 descr_1: E pos_1: RA = 169.6115234D +/- .0008D, pos_2: DEC = -46.5710078D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=17 +/- 1 ! targnum: 946 name_1: INCA221-65 descr_1: A pos_1: RA = 169.3670193D +/- .0008D, pos_2: DEC = -46.7370081D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.48 +/- 1 ! targnum: 947 name_1: 2260-REF descr_1: J,701 pos_1: RA = 169.4824939D +/- .0008D, pos_2: DEC = -46.6706025D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.33 +/- 1 ! targnum: 948 name_1: 2261-REF descr_1: J,701 pos_1: RA = 169.5925839D +/- .0008D, pos_2: DEC = -46.5948325D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.55 +/- 1 ! targnum: 949 name_1: 2262-REF descr_1: J,701 pos_1: RA = 169.4330239D +/- .0008D, pos_2: DEC = -46.7108725D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.65 +/- 1 ! targnum: 950 name_1: POINT1127-145INCA221-66 descr_1: J,701,707 pos_1: RA = 172.4345423D +/- .0008D, pos_2: DEC = -14.6375942D +/- .0008D equinox: 2000 ! targnum: 951 name_1: 1127-145INCA221-66 descr_1: E pos_1: RA = 172.529296D +/- .0008D, pos_2: DEC = -14.8242924D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.9 +/- 1 ! targnum: 952 name_1: INCA221-66 descr_1: A pos_1: RA = 172.3010282D +/- .0008D, pos_2: DEC = -14.7967234D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.2 +/- 1 ! targnum: 953 name_1: 2320-REF descr_1: J,701 pos_1: RA = 172.4912327D +/- .0008D, pos_2: DEC = -14.8465824D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.66 +/- 1 ! targnum: 954 name_1: 2321-REF descr_1: J,701 pos_1: RA = 172.4073127D +/- .0008D, pos_2: DEC = -14.8272524D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.84 +/- 1 ! targnum: 955 name_1: 2322-REF descr_1: J,701 pos_1: RA = 172.3391027D +/- .0008D, pos_2: DEC = -14.8063824D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.1 +/- 1 ! targnum: 956 name_1: POINT1127-145INCA221-67 descr_1: J,701,707 pos_1: RA = 172.4349483D +/- .0008D, pos_2: DEC = -14.6411401D +/- .0008D equinox: 2000 ! targnum: 957 name_1: 1127-145INCA221-67 descr_1: E pos_1: RA = 172.529296D +/- .0008D, pos_2: DEC = -14.8242924D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.9 +/- 1 ! targnum: 958 name_1: INCA221-67 descr_1: A pos_1: RA = 172.6390279D +/- .0008D, pos_2: DEC = -14.6891696D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.6 +/- 1 ! targnum: 959 name_1: 2340-REF descr_1: J,701 pos_1: RA = 172.4912327D +/- .0008D, pos_2: DEC = -14.8465824D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.66 +/- 1 ! targnum: 960 name_1: 2341-REF descr_1: J,701 pos_1: RA = 172.5660627D +/- .0008D, pos_2: DEC = -14.7975924D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.14 +/- 1 ! targnum: 961 name_1: 2342-REF descr_1: J,701 pos_1: RA = 172.6156527D +/- .0008D, pos_2: DEC = -14.7785624D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.35 +/- 1 ! targnum: 962 name_1: POINT1144-379INCA221-68 descr_1: J,701,707 pos_1: RA = 176.8064397D +/- .0008D, pos_2: DEC = -38.0029574D +/- .0008D equinox: 2000 ! targnum: 963 name_1: 1144-379INCA221-68 descr_1: E pos_1: RA = 176.7556531D +/- .0008D, pos_2: DEC = -38.2029607D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.2 +/- 1 ! targnum: 964 name_1: INCA221-68 descr_1: A pos_1: RA = 176.6476872D +/- .0008D, pos_2: DEC = -38.1497889D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: 0.000700 dec_pm_val: 0.0080 fluxnum_1: 1 fluxval_1: V=9.28 +/- 1 ! targnum: 965 name_1: 2420-REF descr_1: J,701 pos_1: RA = 176.6055228D +/- .0008D, pos_2: DEC = -38.1006524D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.76 +/- 1 ! targnum: 966 name_1: 2421-REF descr_1: J,701 pos_1: RA = 176.7200228D +/- .0008D, pos_2: DEC = -38.1942324D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.85 +/- 1 ! targnum: 967 name_1: 2422-REF descr_1: J,701 pos_1: RA = 176.8160028D +/- .0008D, pos_2: DEC = -38.1881124D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.94 +/- 1 ! targnum: 968 name_1: POINT1144-379INCA221-69 descr_1: J,701,707 pos_1: RA = 176.9598370D +/- .0008D, pos_2: DEC = -38.3190901D +/- .0008D equinox: 2000 ! targnum: 969 name_1: 1144-379INCA221-69 descr_1: E pos_1: RA = 176.7556531D +/- .0008D, pos_2: DEC = -38.2029607D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.2 +/- 1 ! targnum: 970 name_1: INCA221-69 descr_1: A pos_1: RA = 176.9526043D +/- .0008D, pos_2: DEC = -38.1197961D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=8.8 +/- 1 ! targnum: 971 name_1: 2440-REF descr_1: J,701 pos_1: RA = 176.9746628D +/- .0008D, pos_2: DEC = -38.0964324D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.63 +/- 1 ! targnum: 972 name_1: 2441-REF descr_1: J,701 pos_1: RA = 176.7977628D +/- .0008D, pos_2: DEC = -38.1709424D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.67 +/- 1 ! targnum: 973 name_1: 2442-REF descr_1: J,701 pos_1: RA = 176.8765328D +/- .0008D, pos_2: DEC = -38.1450524D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.48 +/- 1 ! targnum: 974 name_1: POINT1150+497INCA221-72 descr_1: J,701,707 pos_1: RA = 178.5328557D +/- .0008D, pos_2: DEC = 49.3320199D +/- .0008D equinox: 2000 ! targnum: 975 name_1: 1150+497INCA221-72 descr_1: E pos_1: RA = 178.3515518D +/- .0008D, pos_2: DEC = 49.5189736D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.1 +/- 1 ! targnum: 976 name_1: INCA221-72 descr_1: A pos_1: RA = 178.2252237D +/- .0008D, pos_2: DEC = 49.3961344D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: -0.001300 dec_pm_val: -0.0030 fluxnum_1: 1 fluxval_1: V=9.7 +/- 1 ! targnum: 977 name_1: 2520-REF descr_1: J,701 pos_1: RA = 178.4773522D +/- .0008D, pos_2: DEC = 49.5023076D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.73 +/- 1 ! targnum: 978 name_1: 2521-REF descr_1: J,701 pos_1: RA = 178.2252237D +/- .0008D, pos_2: DEC = 49.3961344D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.7 +/- 1 ! targnum: 979 name_1: 2522-REF descr_1: J,701 pos_1: RA = 178.4538222D +/- .0008D, pos_2: DEC = 49.5293876D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.09 +/- 1 ! targnum: 980 name_1: POINT1150+497INCA221-73 descr_1: J,701,707 pos_1: RA = 178.6362096D +/- .0008D, pos_2: DEC = 49.4800987D +/- .0008D equinox: 2000 ! targnum: 981 name_1: 1150+497INCA221-73 descr_1: E pos_1: RA = 178.3515518D +/- .0008D, pos_2: DEC = 49.5189736D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.1 +/- 1 ! targnum: 982 name_1: INCA221-73 descr_1: A pos_1: RA = 178.4055245D +/- .0008D, pos_2: DEC = 49.6012702D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11 +/- 1 ! targnum: 983 name_1: 2540-REF descr_1: J,701 pos_1: RA = 178.5042722D +/- .0008D, pos_2: DEC = 49.6679476D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.78 +/- 1 ! targnum: 984 name_1: 2541-REF descr_1: J,701 pos_1: RA = 178.4055245D +/- .0008D, pos_2: DEC = 49.6012702D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11 +/- 1 ! targnum: 985 name_1: 2542-REF descr_1: J,701 pos_1: RA = 178.3478822D +/- .0008D, pos_2: DEC = 49.5634976D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.94 +/- 1 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 12.000 targname: POINT0111+021INCA221-4 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 284.33D +/- .3D; req_2: SEQ 12-12.011 NO GAP; req_3: SAME POS FOR 12.001-12.011 AS 12; req_4: CYCLE 3 / 12-12.011; req_5: COND IF POS MODE ASTROMETRY OPERATIONAL req_6: / 12-254.011 comment_1: NEAR JD2449264.51 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 12.001 targname: 0111+021INCA221-4 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 12.002 targname: 120-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.003 targname: 121-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.004 targname: 122-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.005 targname: INCA221-4 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.006 targname: 0111+021INCA221-4 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.007 targname: INCA221-4 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.008 targname: 122-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.009 targname: 121-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 12.010 targname: 120-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.011 targname: 0111+021INCA221-4 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.000 targname: POINT0134+329INCA221-9 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 180.46D +/- .3D; req_2: SEQ 22-22.011 NO GAP; req_3: SAME POS FOR 22.001-22.011 AS 22; req_4: CYCLE 3 / 22-22.011 comment_1: NEAR JD2449276.11 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 22.001 targname: 0134+329INCA221-9 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 22.002 targname: 220-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.003 targname: 221-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.004 targname: 222-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.005 targname: INCA221-9 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.006 targname: 0134+329INCA221-9 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.007 targname: INCA221-9 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 22.008 targname: 222-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.009 targname: 221-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.010 targname: 220-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.011 targname: 0134+329INCA221-9 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.000 targname: POINT0150-334INCA221-12 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 52.91D +/- .3D; req_2: SEQ 32-32.011 NO GAP; req_3: SAME POS FOR 32.001-32.011 AS 32; req_4: CYCLE 3 / 32-32.011 comment_1: NEAR JD2449340.4 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 32.001 targname: 0150-334INCA221-12 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 32.002 targname: 320-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.003 targname: 321-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.004 targname: 322-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.005 targname: INCA221-12 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 32.006 targname: 0150-334INCA221-12 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.007 targname: INCA221-12 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.008 targname: 322-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.009 targname: 321-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.010 targname: 320-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.011 targname: 0150-334INCA221-12 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.000 targname: POINT0153+744INCA221-15 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 179.89D +/- .3D; req_2: SEQ 42-42.011 NO GAP; req_3: SAME POS FOR 42.001-42.011 AS 42; req_4: CYCLE 3 / 42-42.011 comment_1: NEAR JD2449286.18 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 42.001 targname: 0153+744INCA221-15 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 42.002 targname: 420-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.003 targname: 421-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 42.004 targname: 422-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.005 targname: INCA221-15 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.006 targname: 0153+744INCA221-15 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.007 targname: INCA221-15 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.008 targname: 422-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.009 targname: 421-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.010 targname: 420-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.011 targname: 0153+744INCA221-15 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 52.000 targname: POINT0237-233INCA221-18 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 300.56D +/- .3D; req_2: SEQ 52-52.011 NO GAP; req_3: SAME POS FOR 52.001-52.011 AS 52; req_4: CYCLE 3 / 52-52.011 comment_1: NEAR JD2449257.77 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 52.001 targname: 0237-233INCA221-18 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 52.002 targname: 520-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 52.003 targname: 521-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 52.004 targname: 522-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 52.005 targname: INCA221-18 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 52.006 targname: 0237-233INCA221-18 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 52.007 targname: INCA221-18 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 52.008 targname: 522-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 52.009 targname: 521-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 52.010 targname: 520-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 52.011 targname: 0237-233INCA221-18 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 62.000 targname: POINT0241+622INCA221-20 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 193.38D +/- .3D; req_2: SEQ 62-62.011 NO GAP; req_3: SAME POS FOR 62.001-62.011 AS 62; req_4: CYCLE 3 / 62-62.011 comment_1: NEAR JD2449287.17 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 62.001 targname: 0241+622INCA221-20 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 62.002 targname: 620-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.003 targname: 621-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.004 targname: 622-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.005 targname: INCA221-20 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.006 targname: 0241+622INCA221-20 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.007 targname: INCA221-20 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.008 targname: 622-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.009 targname: 621-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 62.010 targname: 620-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.011 targname: 0241+622INCA221-20 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.000 targname: POINT0312-770INCA221-22 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 343.37D +/- .3D; req_2: SEQ 72-72.011 NO GAP; req_3: SAME POS FOR 72.001-72.011 AS 72; req_4: CYCLE 3 / 72-72.011 comment_1: NEAR JD2449278.02 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 72.001 targname: 0312-770INCA221-22 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 72.002 targname: 720-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.003 targname: 721-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.004 targname: 722-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.005 targname: INCA221-22 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.006 targname: 0312-770INCA221-22 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.007 targname: INCA221-22 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 72.008 targname: 722-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.009 targname: 721-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.010 targname: 720-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.011 targname: 0312-770INCA221-22 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 82.000 targname: POINT0454+844INCA221-31 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 101.46D +/- .3D; req_2: SEQ 82-82.011 NO GAP; req_3: SAME POS FOR 82.001-82.011 AS 82; req_4: CYCLE 3 / 82-82.011 comment_1: NEAR JD2449403.32 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 82.001 targname: 0454+844INCA221-31 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 82.002 targname: 820-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 82.003 targname: 821-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 82.004 targname: 822-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 82.005 targname: INCA221-31 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 82.006 targname: 0454+844INCA221-31 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 82.007 targname: INCA221-31 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 82.008 targname: 822-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 82.009 targname: 821-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 82.010 targname: 820-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 82.011 targname: 0454+844INCA221-31 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.000 targname: POINT0537-441INCA221-35 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 273.15D +/- .3D; req_2: SEQ 92-92.011 NO GAP; req_3: SAME POS FOR 92.001-92.011 AS 92; req_4: CYCLE 3 / 92-92.011 comment_1: NEAR JD2449252.76 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 92.001 targname: 0537-441INCA221-35 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 92.002 targname: 920-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.003 targname: 921-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 92.004 targname: 922-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.005 targname: INCA221-35 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.006 targname: 0537-441INCA221-35 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.007 targname: INCA221-35 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.008 targname: 922-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.009 targname: 921-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.010 targname: 920-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.011 targname: 0537-441INCA221-35 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.000 targname: POINT0537-441INCA221-36 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 314.25D +/- .3D; req_2: SEQ 94-94.011 NO GAP; req_3: SAME POS FOR 94.001-94.011 AS 94; req_4: CYCLE 3 / 94-94.011 comment_1: NEAR JD2449295.74 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 94.001 targname: 0537-441INCA221-36 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 94.002 targname: 940-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.003 targname: 941-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.004 targname: 942-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.005 targname: INCA221-36 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.006 targname: 0537-441INCA221-36 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.007 targname: INCA221-36 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.008 targname: 942-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.009 targname: 941-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.010 targname: 940-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.011 targname: 0537-441INCA221-36 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 102.000 targname: POINT0607-157INCA221-37 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 271.42D +/- .3D; req_2: SEQ 102-102.011 NO GAP; req_3: SAME POS FOR 102.001-102.011 AS 102; req_4: CYCLE 3 / 102-102.011 comment_1: NEAR JD2449256.77 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 102.001 targname: 0607-157INCA221-37 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 102.002 targname: 1020-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.003 targname: 1021-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.004 targname: 1022-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.005 targname: INCA221-37 config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.006 targname: 0607-157INCA221-37 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.007 targname: INCA221-37 config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.008 targname: 1022-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.009 targname: 1021-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 102.010 targname: 1020-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.011 targname: 0607-157INCA221-37 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.000 targname: POINT0607-157INCA221-38 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 321D +/- .3D; req_2: SEQ 104-104.011 NO GAP; req_3: SAME POS FOR 104.001-104.011 AS 104; req_4: CYCLE 3 / 104-104.011 comment_1: NEAR JD2449318.4 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 104.001 targname: 0607-157INCA221-38 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 104.002 targname: 1040-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.003 targname: 1041-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.004 targname: 1042-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.005 targname: INCA221-38 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.006 targname: 0607-157INCA221-38 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.007 targname: INCA221-38 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 104.008 targname: 1042-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.009 targname: 1041-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.010 targname: 1040-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.011 targname: 0607-157INCA221-38 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 112.000 targname: POINT0637-752INCA221-39 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 120.26D +/- .3D; req_2: SEQ 112-112.011 NO GAP; req_3: SAME POS FOR 112.001-112.011 AS 112; req_4: CYCLE 3 / 112-112.011 comment_1: NEAR JD2449106.91 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 112.001 targname: 0637-752INCA221-39 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 112.002 targname: 1120-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 112.003 targname: 1121-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 112.004 targname: 1122-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 112.005 targname: INCA221-39 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 112.006 targname: 0637-752INCA221-39 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 112.007 targname: INCA221-39 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 112.008 targname: 1122-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 112.009 targname: 1121-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 112.010 targname: 1120-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 112.011 targname: 0637-752INCA221-39 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.000 targname: POINT0736+017INCA221-42 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 315.35D +/- .3D; req_2: SEQ 122-122.011 NO GAP; req_3: SAME POS FOR 122.001-122.011 AS 122; req_4: CYCLE 3 / 122-122.011 comment_1: NEAR JD2449344.03 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 122.001 targname: 0736+017INCA221-42 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 122.002 targname: 1220-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.003 targname: 1221-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 122.004 targname: 1222-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.005 targname: INCA221-42 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.006 targname: 0736+017INCA221-42 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.007 targname: INCA221-42 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.008 targname: 1222-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.009 targname: 1221-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.010 targname: 1220-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.011 targname: 0736+017INCA221-42 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.000 targname: POINT0743-673INCA221-43 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 88.72D +/- .3D; req_2: SEQ 132-132.011 NO GAP; req_3: SAME POS FOR 132.001-132.011 AS 132; req_4: CYCLE 3 / 132-132.011 comment_1: NEAR JD2449455.32 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 132.001 targname: 0743-673INCA221-43 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 132.002 targname: 1320-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.003 targname: 1321-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.004 targname: 1322-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.005 targname: INCA221-43 config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.006 targname: 0743-673INCA221-43 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.007 targname: INCA221-43 config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.008 targname: 1322-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.009 targname: 1321-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.010 targname: 1320-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.011 targname: 0743-673INCA221-43 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 142.000 targname: POINT0818-128INCA221-44 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 20.61D +/- .3D; req_2: SEQ 142-142.011 NO GAP; req_3: SAME POS FOR 142.001-142.011 AS 142; req_4: CYCLE 3 / 142-142.011 comment_1: NEAR JD2449386.21 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 142.001 targname: 0818-128INCA221-44 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 142.002 targname: 1420-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.003 targname: 1421-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.004 targname: 1422-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.005 targname: INCA221-44 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.006 targname: 0818-128INCA221-44 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.007 targname: INCA221-44 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.008 targname: 1422-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.009 targname: 1421-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 142.010 targname: 1420-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.011 targname: 0818-128INCA221-44 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.000 targname: POINT0826-373INCA221-45 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 352.57D +/- .3D; req_2: SEQ 152-152.011 NO GAP; req_3: SAME POS FOR 152.001-152.011 AS 152; req_4: CYCLE 3 / 152-152.011 comment_1: NEAR JD2449370.72 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 152.001 targname: 0826-373INCA221-45 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 152.002 targname: 1520-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.003 targname: 1521-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.004 targname: 1522-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.005 targname: INCA221-45 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.006 targname: 0826-373INCA221-45 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.007 targname: INCA221-45 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 152.008 targname: 1522-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.009 targname: 1521-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.010 targname: 1520-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.011 targname: 0826-373INCA221-45 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.000 targname: POINT0826-373INCA221-46 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 43.11D +/- .3D; req_2: SEQ 154-154.011 NO GAP; req_3: SAME POS FOR 154.001-154.011 AS 154; req_4: CYCLE 3 / 154-154.011 comment_1: NEAR JD2449412.35 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 154.001 targname: 0826-373INCA221-46 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 154.002 targname: 1540-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.003 targname: 1541-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.004 targname: 1542-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.005 targname: INCA221-46 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 154.006 targname: 0826-373INCA221-46 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.007 targname: INCA221-46 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.008 targname: 1542-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.009 targname: 1541-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.010 targname: 1540-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.011 targname: 0826-373INCA221-46 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.000 targname: POINT0836+710INCA221-49 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 272.95D +/- .3D; req_2: SEQ 162-162.011 NO GAP; req_3: SAME POS FOR 162.001-162.011 AS 162; req_4: CYCLE 3 / 162-162.011 comment_1: NEAR JD2452586.3 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 162.001 targname: 0836+710INCA221-49 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 162.002 targname: 1620-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.003 targname: 1621-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 162.004 targname: 1622-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.005 targname: INCA221-49 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.006 targname: 0836+710INCA221-49 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.007 targname: INCA221-49 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.008 targname: 1622-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.009 targname: 1621-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.010 targname: 1620-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.011 targname: 0836+710INCA221-49 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 172.000 targname: POINT0851+202INCA221-50 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 120.87D +/- .3D; req_2: SEQ 172-172.011 NO GAP; req_3: SAME POS FOR 172.001-172.011 AS 172; req_4: CYCLE 3 / 172-172.011 comment_1: NEAR JD2449393.25 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 172.001 targname: 0851+202INCA221-50 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 172.002 targname: 1720-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 172.003 targname: 1721-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 172.004 targname: 1722-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 172.005 targname: INCA221-50 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 172.006 targname: 0851+202INCA221-50 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 172.007 targname: INCA221-50 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 172.008 targname: 1722-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 172.009 targname: 1721-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 172.010 targname: 1720-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 172.011 targname: 0851+202INCA221-50 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 182.000 targname: POINT0912+297INCA221-53 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 161.51D +/- .3D; req_2: SEQ 182-182.011 NO GAP; req_3: SAME POS FOR 182.001-182.011 AS 182; req_4: CYCLE 3 / 182-182.011 comment_1: NEAR JD2449394.43 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 182.001 targname: 0912+297INCA221-53 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 182.002 targname: 1820-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.003 targname: 1821-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.004 targname: 1822-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.005 targname: INCA221-53 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.006 targname: 0912+297INCA221-53 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.007 targname: INCA221-53 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.008 targname: 1822-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.009 targname: 1821-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 182.010 targname: 1820-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.011 targname: 0912+297INCA221-53 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.000 targname: POINT0955+326INCA221-56 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 200.81D +/- .3D; req_2: SEQ 192-192.011 NO GAP; req_3: SAME POS FOR 192.001-192.011 AS 192; req_4: CYCLE 3 / 192-192.011 comment_1: NEAR JD2449393.03 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 192.001 targname: 0955+326INCA221-56 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 192.002 targname: 1920-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.003 targname: 1921-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.004 targname: 1922-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.005 targname: INCA221-56 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.006 targname: 0955+326INCA221-56 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.007 targname: INCA221-56 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 192.008 targname: 1922-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.009 targname: 1921-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.010 targname: 1920-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.011 targname: 0955+326INCA221-56 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.000 targname: POINT0955+326INCA221-57 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 248.14D +/- .3D; req_2: SEQ 194-194.011 NO GAP; req_3: SAME POS FOR 194.001-194.011 AS 194; req_4: CYCLE 3 / 194-194.011 comment_1: NEAR JD2449374.29 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 194.001 targname: 0955+326INCA221-57 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 194.002 targname: 1940-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.003 targname: 1941-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.004 targname: 1942-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.005 targname: INCA221-57 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 194.006 targname: 0955+326INCA221-57 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.007 targname: INCA221-57 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.008 targname: 1942-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.009 targname: 1941-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.010 targname: 1940-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.011 targname: 0955+326INCA221-57 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.000 targname: POINT1020-103INCA221-58 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 317.19D +/- .3D; req_2: SEQ 202-202.011 NO GAP; req_3: SAME POS FOR 202.001-202.011 AS 202; req_4: CYCLE 3 / 202-202.011 comment_1: NEAR JD2449378.69 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 202.001 targname: 1020-103INCA221-58 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 202.002 targname: 2020-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.003 targname: 2021-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 202.004 targname: 2022-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.005 targname: INCA221-58 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.006 targname: 1020-103INCA221-58 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.007 targname: INCA221-58 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.008 targname: 2022-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.009 targname: 2021-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.010 targname: 2020-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.011 targname: 1020-103INCA221-58 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 212.000 targname: POINT1038+064INCA221-59 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 95.59D +/- .3D; req_2: SEQ 212-212.011 NO GAP; req_3: SAME POS FOR 212.001-212.011 AS 212; req_4: CYCLE 3 / 212-212.011 comment_1: NEAR JD2449417.83 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 212.001 targname: 1038+064INCA221-59 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 212.002 targname: 2120-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 212.003 targname: 2121-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 212.004 targname: 2122-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 212.005 targname: INCA221-59 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 212.006 targname: 1038+064INCA221-59 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 212.007 targname: INCA221-59 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 212.008 targname: 2122-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 212.009 targname: 2121-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 212.010 targname: 2120-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 212.011 targname: 1038+064INCA221-59 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 214.000 targname: POINT1038+064INCA221-60 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 44.52D +/- .3D; req_2: SEQ 214-214.011 NO GAP; req_3: SAME POS FOR 214.001-214.011 AS 214; req_4: CYCLE 3 / 214-214.011 comment_1: NEAR JD2449412.79 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 214.001 targname: 1038+064INCA221-60 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 214.002 targname: 2140-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.003 targname: 2141-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.004 targname: 2142-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.005 targname: INCA221-60 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.006 targname: 1038+064INCA221-60 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.007 targname: INCA221-60 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.008 targname: 2142-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.009 targname: 2141-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 214.010 targname: 2140-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.011 targname: 1038+064INCA221-60 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.000 targname: POINT1116-462INCA221-64 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 99.15D +/- .3D; req_2: SEQ 224-224.011 NO GAP; req_3: SAME POS FOR 224.001-224.011 AS 224; req_4: CYCLE 3 / 224-224.011 comment_1: NEAR JD2449505.57 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 224.001 targname: 1116-462INCA221-64 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 224.002 targname: 2240-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.003 targname: 2241-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.004 targname: 2242-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.005 targname: INCA221-64 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.006 targname: 1116-462INCA221-64 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.007 targname: INCA221-64 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 224.008 targname: 2242-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.009 targname: 2241-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.010 targname: 2240-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.011 targname: 1116-462INCA221-64 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.000 targname: POINT1116-462INCA221-65 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 41.85D +/- .3D; req_2: SEQ 226-226.011 NO GAP; req_3: SAME POS FOR 226.001-226.011 AS 226; req_4: CYCLE 3 / 226-226.011 comment_1: NEAR JD2449452.32 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 226.001 targname: 1116-462INCA221-65 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 226.002 targname: 2260-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.003 targname: 2261-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.004 targname: 2262-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.005 targname: INCA221-65 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 226.006 targname: 1116-462INCA221-65 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.007 targname: INCA221-65 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.008 targname: 2262-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.009 targname: 2261-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.010 targname: 2260-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.011 targname: 1116-462INCA221-65 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 232.000 targname: POINT1127-145INCA221-66 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 98.31D +/- .3D; req_2: SEQ 232-232.011 NO GAP; req_3: SAME POS FOR 232.001-232.011 AS 232; req_4: CYCLE 3 / 232-232.011 comment_1: NEAR JD2449476.76 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 232.001 targname: 1127-145INCA221-66 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 232.002 targname: 2320-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 232.003 targname: 2321-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 232.004 targname: 2322-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 232.005 targname: INCA221-66 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 232.006 targname: 1127-145INCA221-66 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 232.007 targname: INCA221-66 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 232.008 targname: 2322-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 232.009 targname: 2321-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 232.010 targname: 2320-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 232.011 targname: 1127-145INCA221-66 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 234.000 targname: POINT1127-145INCA221-67 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 42.06D +/- .3D; req_2: SEQ 234-234.011 NO GAP; req_3: SAME POS FOR 234.001-234.011 AS 234; req_4: CYCLE 3 / 234-234.011 comment_1: NEAR JD2449436.5 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 234.001 targname: 1127-145INCA221-67 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 234.002 targname: 2340-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 234.003 targname: 2341-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 234.004 targname: 2342-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 234.005 targname: INCA221-67 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 234.006 targname: 1127-145INCA221-67 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 234.007 targname: INCA221-67 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 234.008 targname: 2342-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 234.009 targname: 2341-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 234.010 targname: 2340-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 234.011 targname: 1127-145INCA221-67 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 242.000 targname: POINT1144-379INCA221-68 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 116.43D +/- .3D; req_2: SEQ 242-242.011 NO GAP; req_3: SAME POS FOR 242.001-242.011 AS 242; req_4: CYCLE 3 / 242-242.011 comment_1: NEAR JD2449535.25 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 242.001 targname: 1144-379INCA221-68 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 242.002 targname: 2420-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 242.003 targname: 2421-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 242.004 targname: 2422-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 242.005 targname: INCA221-68 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 242.006 targname: 1144-379INCA221-68 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 242.007 targname: INCA221-68 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 242.008 targname: 2422-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 242.009 targname: 2421-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 242.010 targname: 2420-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 242.011 targname: 1144-379INCA221-68 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 244.000 targname: POINT1144-379INCA221-69 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 68.43D +/- .3D; req_2: SEQ 244-244.011 NO GAP; req_3: SAME POS FOR 244.001-244.011 AS 244; req_4: CYCLE 3 / 244-244.011 comment_1: NEAR JD2449473.32 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 244.001 targname: 1144-379INCA221-69 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 244.002 targname: 2440-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 244.003 targname: 2441-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 244.004 targname: 2442-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 244.005 targname: INCA221-69 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 244.006 targname: 1144-379INCA221-69 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 244.007 targname: INCA221-69 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 244.008 targname: 2442-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 244.009 targname: 2441-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 244.010 targname: 2440-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 244.011 targname: 1144-379INCA221-69 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 252.000 targname: POINT1150+497INCA221-72 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 220.26D +/- .3D; req_2: SEQ 252-252.011 NO GAP; req_3: SAME POS FOR 252.001-252.011 AS 252; req_4: CYCLE 3 / 252-252.011 comment_1: NEAR JD2449401.56 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 252.001 targname: 1150+497INCA221-72 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 252.002 targname: 2520-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 252.003 targname: 2521-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 252.004 targname: 2522-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 252.005 targname: INCA221-72 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 252.006 targname: 1150+497INCA221-72 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 252.007 targname: INCA221-72 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 252.008 targname: 2522-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 252.009 targname: 2521-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 252.010 targname: 2520-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 252.011 targname: 1150+497INCA221-72 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 254.000 targname: POINT1150+497INCA221-73 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 210.25D +/- .3D; req_2: SEQ 254-254.011 NO GAP; req_3: SAME POS FOR 254.001-254.011 AS 254; req_4: CYCLE 3 / 254-254.011 comment_1: NEAR JD2449408.46 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 254.001 targname: 1150+497INCA221-73 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 254.002 targname: 2540-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 254.003 targname: 2541-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 254.004 targname: 2542-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 254.005 targname: INCA221-73 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 254.006 targname: 1150+497INCA221-73 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 254.007 targname: INCA221-73 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 254.008 targname: 2542-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 254.009 targname: 2541-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 254.010 targname: 2540-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 254.011 targname: 1150+497INCA221-73 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! ! end of exposure logsheet ! No scan data records found