! File: 4154C.PROP ! Database: PEPDB ! Date: 20-FEB-1994:11:02:13 coverpage: title_1: EXTRAGALACTIC ASTROMETRY AND ASTROPHYSICS title_2: FT12-23,PART 2 OF 2 - CONTINUATION OF 1013, CYCLE 3 sci_cat: QUASARS & AGN sci_subcat: ASTROMETRY proposal_for: GTO/AST longterm: 9 cont_id: 1013 pi_title: DR. pi_fname: WILLIAM pi_mi: H. pi_lname: JEFFERYS pi_inst: UNIVERSITY OF TEXAS AT AUSTIN pi_country: USA pi_phone: (512)471-1455 keywords_1: QUASARS, BL LACS, AGNS, HIPPARCOS, REFERENCE FRAMES keywords_2: FUNDAMENTAL ASTROMETRY, QUASAR INTERNAL MOTION hours_pri: 15.00 hours_par: 15.00 num_pri: 72 fgs: Y pi_position: PROFESSOR ! end of coverpage abstract: line_1: The goal of this project is the determination of the rotation of line_2: the HIPPARCOS Reference Frame with respect to an Extragalactic line_3: Frame. The program will derive the internal optical motions of line_4: extragalactic objects (QSOs, BL Lacs, AGNs) at the +/- 0.002 line_5: arcsecond per year level of accuracy. line_7: 160 SAO stars within the FGSFOV of all selected QSOs, BL Lacs, line_8: and AGNs are included in the HIPPARCOS catalog. Ground based line_9: speckle observations have been used to pre-detect doubles which line_10: would cause problems for the FGS. The FGSs will measure the line_11: relative positions of SAO stars with respect to objects brighter line_12: than 17 mag. Fainter objects will be observed with the WFPC and line_13: FGS together. The objects have been selected in conjunction with line_14: the recommendations of the IAU working group in Radio/Optical line_15: Identifications, and have been selected for compactness and line_16: intensity. Most of the objects are recommended as ultimate line_17: position calibrators. ! ! end of abstract general_form_proposers: lname: JEFFERYS fname: WILLIAM title: DR. mi: H. inst: UNIVERSITY OF TEXAS AT AUSTIN country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: The HIPPARCOS satellite will produce positions, proper motions, line_2: and parallaxes for 100,000 stars with an accuracy of 0.002 line_3: arcseconds in the positions and parallaxes. However, the nature line_4: of the observations means that the HIPPARCOS Instrumental line_5: Coordinate system will have an unknown overall rotation with line_6: respect to an inertial reference frame. The extragalactic line_7: objects define a frame which is very close to being inertial, line_8: differing only by cosmological effects. The goal of these line_9: observations is twofold: first to determine the relative line_10: positions and motions of selected Extragalactic Objects (EGOs) line_11: with respect to the HIPPARCOS reference frrame, and, by line_12: inverting the observations, infer the rotation of the HIPPARCOS line_13: frame, as part of the Astrometry Team GTO time, and second, by line_14: using the Planetary Camera and guiding FGSs in the "Transit line_15: Circle" mode, obtain structural information about the EGOs as line_16: part of the WF/PC GTO time. ! question: 2 section: 2 line_1: Several methods have been proposed to "stop" the HIPPARCOS frame line_2: rotation. The Space Telescope observations have the possibility line_3: to provide the most accurate of these determinations, possibly line_4: to the level of 0.0002 arcsec/year accuracy. Such a line_5: determination would make a significant impact on our knowledge line_6: of the motions of groups of stars (which now must have line_7: precession removed) and would provide a more stable reference line_8: frame against which to measure the motions of solar system line_9: objects, for orbital and relativity studies. line_11: Because the observations will be made over the lifetime of ST, line_12: internal apparent motions within the EGO cores will be observed line_13: or not observed at a level which can only be obtained at radio line_14: wavelengths using VLBI at the present time. The study of time line_15: variable optical positions will bring a new aspect to bear on line_16: the study of these objects. line_18: Speckle observations of candidate HIPPARCOS stars were used to line_19: determine which ones are multiple and hence unsuitable for line_20: these studies. Franz and McAlister used the KPNO 4-meter and line_21: the Perkins telescope in the northern hemisphere, and Argue line_22: and Morgan used the AAT in the southern hemisphere to obtain line_23: observations. ! question: 3 section: 1 line_1: Observations will be made with the "Transit Circle" mode line_2: using PC-8 and the astrometric data from the guiding FGSs line_3: simultaneously. The spacecraft must be oriented so that line_4: the EGO and HIP stars are aligned for appropriate use of line_5: the guide stars. ! question: 4 section: 1 line_1: Because of astrometric limitations of the atmosphere, ground- line_2: based observations are capable of only about 0.01 arcsecond line_3: accuracy in measuring the relative positions between two line_4: objects separated by more than an isoplanatic patch. These line_5: observations require the longest focus telescopes and detailed line_6: analysis of the optical distortions. This accuracy has only line_7: been achieved in a handful of fields. ST will provide single line_8: observations at the 0.002 arcsecond level, and should allow line_9: an order of magnitude increase over the ground-based line_10: observations. The standard method of ground-based observation line_11: is still the transit circle, so relative optical positions of line_12: the HIPPARCOS stars with respect to EGOs will not be measured line_13: from the ground. Radio positions using VLBI and VLA line_14: observations of RS CVn stars will be made to relate the line_15: HIPPARCOS frame to EGOs indirectly. However, ST has the line_16: capability to measure this rotation directly, without the line_17: problem of relating the optical and radio emission regions. line_18: The possible transfer of the radio reference frame to the line_19: optical will of necessity require such assumptions about line_20: the EGOs, but the use of at least 50 objects will allow line_21: statistical statements to be made which will be of great line_22: astrophysical interest. ! question: 5 section: 1 line_1: In order to minimize the impact of power constraints, the dates line_2: of observations were picked so that the nominal FGS orientation line_3: is aligned with the EGO-HIP star position angle, and off-nominal line_4: rolls are not required. However, this constraint makes the line_5: observations time-critical. Because the goal is to measure line_6: motions, the repeat observations must be made within multiples line_7: of one year within two days, in order not to contaminate the line_8: motions with the parallaxes of other HIPPARCOS stars. ! question: 6 section: 1 line_1: The astrometric data will be reduced at STScI or the University line_2: of Texas using the SDAS/ADRS Software. The reduction of WF/PC line_3: data will use the SDAF/WF-PC Software. Analysis will be line_4: performed as appropriate. In particular, the reduced poitional line_5: data will be transmitted to the HIPPARCOS project, and the line_6: analysis will be performed in conjunction with that project. line_8: The PC observations using the F606W and F658N filters require line_9: the calibrations derived from the first 3 exposure log sheet line_10: lines of GTO proposal 1013. ! question: 8 section: 1 line_1: 160 HIPPARCOS stars have been identified within 10 arcminutes of line_2: 90 EGOs. During the GTO time, we expect to make three line_3: observations of 40 HIP star-EGO pairs, two observations of 40 line_4: more, and one observation of 40 more, for a total of 120 object line_5: pairs. We have included all the candidate objects, but expect line_6: scheduling constraints to limit which objects will be observed. line_8: The success of the program depends on obtaining essentially all line_9: of the priority one observations. Priority 2 solutions will line_10: strengthen the solution. Priority 3 observations are non- line_11: critical and should be treated as "fillers." ! question: 13 section: 1 line_1: Relative positions and motions of HIPPARCOS stars will be made line_2: with respect to Extragalactic Objects (EGOs), using the Fine line_3: Guidance Sensors and the Planetary Camera in the "transit line_4: circle" mode. The data will provide information line_5: on structure changes in the cores of these objects. The line_6: position measurements will be used to derive the overall line_7: rotation of the HIPPARCOS reference frame with respect to line_8: the extragalactic reference frame. ! !end of general form text general_form_address: lname: HEMENWAY fname: PAUL mi: D title: DR. category: CON inst: UNIVERSITY OF TEXAS AT AUSTIN addr_1: DEPARTMENT OF ASTRONOMY addr_2: UNIVERSITY OF TEXAS AT AUSTIN city: AUSTIN state: TX zip: 78712 country: USA phone: (512)471-3431 ! lname: JEFFERYS fname: WILLIAM mi: H. title: DR. category: PI inst: UNIVERSITY OF TEXAS AT AUSTIN addr_1: DEPARTMENT OF ASTRONOMY addr_2: UNIVERSITY OF TEXAS AT AUSTIN city: AUSTIN state: TX zip: 78712 country: USA phone: (512)471-1455 ! ! end of general_form_address records fixed_targets: targnum: 120 name_1: POINT1206-399INCA221-77 descr_1: J,701,707 pos_1: RA = 182.1408617D +/- .0008D, pos_2: DEC = -40.1992643D +/- .0008D equinox: 2000 ! targnum: 121 name_1: 1206-399INCA221-77 descr_1: E pos_1: RA = 182.3971228D +/- .0008D, pos_2: DEC = -40.2699817D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=17 +/- 1 ! targnum: 122 name_1: INCA221-77 descr_1: A pos_1: RA = 182.2022333D +/- .0008D, pos_2: DEC = -40.385681D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11 +/- 1 ! targnum: 123 name_1: 120-REF descr_1: J,701 pos_1: RA = 182.3182822D +/- .0008D, pos_2: DEC = -40.3466524D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.17 +/- 1 ! targnum: 124 name_1: 121-REF descr_1: J,701 pos_1: RA = 182.1402922D +/- .0008D, pos_2: DEC = -40.4041024D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.08 +/- 1 ! targnum: 125 name_1: 122-REF descr_1: J,701 pos_1: RA = 182.3141822D +/- .0008D, pos_2: DEC = -40.3475624D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.68 +/- 1 ! targnum: 140 name_1: POINT1206-399INCA221-78 descr_1: J,701,707 pos_1: RA = 182.5167754D +/- .0008D, pos_2: DEC = -40.0981444D +/- .0008D equinox: 2000 ! targnum: 141 name_1: 1206-399INCA221-78 descr_1: E pos_1: RA = 182.3971228D +/- .0008D, pos_2: DEC = -40.2699817D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=17 +/- 1 ! targnum: 142 name_1: INCA221-78 descr_1: A pos_1: RA = 182.4950723D +/- .0008D, pos_2: DEC = -40.2947975D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.1 +/- 1 ! targnum: 143 name_1: 140-REF descr_1: J,701 pos_1: RA = 182.3284022D +/- .0008D, pos_2: DEC = -40.2324024D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.62 +/- 1 ! targnum: 144 name_1: 141-REF descr_1: J,701 pos_1: RA = 182.3325122D +/- .0008D, pos_2: DEC = -40.2334724D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.09 +/- 1 ! targnum: 145 name_1: 142-REF descr_1: J,701 pos_1: RA = 182.5761721D +/- .0008D, pos_2: DEC = -40.2781624D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.87 +/- 1 ! targnum: 220 name_1: POINT1211+334INCA221-80 descr_1: J,701,707 pos_1: RA = 183.7247413D +/- .0008D, pos_2: DEC = 33.0502624D +/- .0008D equinox: 2000 ! targnum: 221 name_1: 1211+334INCA221-80 descr_1: E pos_1: RA = 183.5159701D +/- .0008D, pos_2: DEC = 33.1604371D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=17 +/- 1 ! targnum: 222 name_1: INCA221-80 descr_1: A pos_1: RA = 183.7455311D +/- .0008D, pos_2: DEC = 33.2561683D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: 0.000100 dec_pm_val: 0.0170 fluxnum_1: 1 fluxval_1: V=8.15 +/- 1 ! targnum: 223 name_1: 220-REF descr_1: J,701 pos_1: RA = 183.6151428D +/- .0008D, pos_2: DEC = 33.2436576D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.11 +/- 1 ! targnum: 224 name_1: 221-REF descr_1: J,701 pos_1: RA = 183.7805728D +/- .0008D, pos_2: DEC = 33.2443576D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.02 +/- 1 ! targnum: 225 name_1: 222-REF descr_1: J,701 pos_1: RA = 183.5973428D +/- .0008D, pos_2: DEC = 33.1960976D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.51 +/- 1 ! targnum: 320 name_1: POINT1219+285INCA221-82 descr_1: J,701,707 pos_1: RA = 185.5824262D +/- .0008D, pos_2: DEC = 28.3160079D +/- .0008D equinox: 2000 ! targnum: 321 name_1: 1219+285INCA221-82 descr_1: E pos_1: RA = 185.3817745D +/- .0008D, pos_2: DEC = 28.232841D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 322 name_1: INCA221-82 descr_1: A pos_1: RA = 185.4673059D +/- .0008D, pos_2: DEC = 28.1497392D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.9 +/- 1 ! targnum: 323 name_1: 320-REF descr_1: J,701 pos_1: RA = 185.4673828D +/- .0008D, pos_2: DEC = 28.1610176D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.08 +/- 1 ! targnum: 324 name_1: 321-REF descr_1: J,701 pos_1: RA = 185.3696528D +/- .0008D, pos_2: DEC = 28.2768676D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.06 +/- 1 ! targnum: 325 name_1: 322-REF descr_1: J,701 pos_1: RA = 185.3904028D +/- .0008D, pos_2: DEC = 28.2176876D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.27 +/- 1 ! targnum: 420 name_1: POINT1404+286INCA221-92 descr_1: J,701,707 pos_1: RA = 211.7828299D +/- .0008D, pos_2: DEC = 28.6456746D +/- .0008D equinox: 2000 ! targnum: 421 name_1: 1404+286INCA221-92 descr_1: E pos_1: RA = 211.7516272D +/- .0008D, pos_2: DEC = 28.4540827D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14 +/- 1 ! targnum: 422 name_1: INCA221-92 descr_1: A pos_1: RA = 211.6696294D +/- .0008D, pos_2: DEC = 28.4843471D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.7 +/- 1 ! targnum: 423 name_1: 420-REF descr_1: J,701 pos_1: RA = 211.7212546D +/- .0008D, pos_2: DEC = 28.4544065D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.11 +/- 1 ! targnum: 424 name_1: 421-REF descr_1: J,701 pos_1: RA = 211.6156746D +/- .0008D, pos_2: DEC = 28.5051865D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.94 +/- 1 ! targnum: 425 name_1: 422-REF descr_1: J,701 pos_1: RA = 211.7329546D +/- .0008D, pos_2: DEC = 28.4379965D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=6.87 +/- 1 ! targnum: 460 name_1: POINT1404+286INCA221-94 descr_1: J,701,707 pos_1: RA = 211.9560636D +/- .0008D, pos_2: DEC = 28.3486856D +/- .0008D equinox: 2000 ! targnum: 461 name_1: 1404+286INCA221-94 descr_1: E pos_1: RA = 211.7516272D +/- .0008D, pos_2: DEC = 28.4540827D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14 +/- 1 ! targnum: 462 name_1: INCA221-94 descr_1: A pos_1: RA = 211.9562804D +/- .0008D, pos_2: DEC = 28.5453542D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.5 +/- 1 ! targnum: 463 name_1: 460-REF descr_1: J,701 pos_1: RA = 211.8869046D +/- .0008D, pos_2: DEC = 28.5334465D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.99 +/- 1 ! targnum: 464 name_1: 461-REF descr_1: J,701 pos_1: RA = 211.9708246D +/- .0008D, pos_2: DEC = 28.5291665D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.96 +/- 1 ! targnum: 465 name_1: 462-REF descr_1: J,701 pos_1: RA = 211.7329546D +/- .0008D, pos_2: DEC = 28.4379965D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=6.87 +/- 1 ! targnum: 540 name_1: POINT1416+067INCA221-96 descr_1: J,701,707 pos_1: RA = 214.9317786D +/- .0008D, pos_2: DEC = 6.5849182D +/- .0008D equinox: 2000 ! targnum: 541 name_1: 1416+067INCA221-96 descr_1: E pos_1: RA = 214.7837255D +/- .0008D, pos_2: DEC = 6.4763507D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.8 +/- 1 ! targnum: 542 name_1: INCA221-96 descr_1: A pos_1: RA = 214.8723738D +/- .0008D, pos_2: DEC = 6.3788444D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.4 +/- 1 ! targnum: 543 name_1: 540-REF descr_1: J,701 pos_1: RA = 214.7172329D +/- .0008D, pos_2: DEC = 6.5370363D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.38 +/- 1 ! targnum: 544 name_1: 541-REF descr_1: J,701 pos_1: RA = 214.8723738D +/- .0008D, pos_2: DEC = 6.3788444D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.4 +/- 1 ! targnum: 545 name_1: 542-REF descr_1: J,701 pos_1: RA = 214.9148329D +/- .0008D, pos_2: DEC = 6.3670063D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.79 +/- 1 ! targnum: 620 name_1: POINT1418+546INCA221-97 descr_1: J,701,707 pos_1: RA = 215.3041140D +/- .0008D, pos_2: DEC = 54.3536401D +/- .0008D equinox: 2000 ! targnum: 621 name_1: 1418+546INCA221-97 descr_1: E pos_1: RA = 214.9437108D +/- .0008D, pos_2: DEC = 54.3871287D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.6 +/- 1 ! targnum: 622 name_1: INCA221-97 descr_1: A pos_1: RA = 215.076025D +/- .0008D, pos_2: DEC = 54.5062757D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: 0.000900 dec_pm_val: -0.0810 fluxnum_1: 1 fluxval_1: V=9.27 +/- 1 ! targnum: 623 name_1: 620-REF descr_1: J,701 pos_1: RA = 214.9323585D +/- .0008D, pos_2: DEC = 54.3136763D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.92 +/- 1 ! targnum: 624 name_1: 621-REF descr_1: J,701 pos_1: RA = 214.9736685D +/- .0008D, pos_2: DEC = 54.3221962D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.5 +/- 1 ! targnum: 625 name_1: 622-REF descr_1: J,701 pos_1: RA = 215.1003186D +/- .0008D, pos_2: DEC = 54.4856762D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.61 +/- 1 ! targnum: 720 name_1: POINT1451-375INCA221-101 descr_1: J,701,707 pos_1: RA = 223.3700248D +/- .0008D, pos_2: DEC = -37.7378791D +/- .0008D equinox: 2000 ! targnum: 721 name_1: 1451-375INCA221-101 descr_1: E pos_1: RA = 223.6136527D +/- .0008D, pos_2: DEC = -37.7925231D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.7 +/- 1 ! targnum: 722 name_1: INCA221-101 descr_1: A pos_1: RA = 223.5699278D +/- .0008D, pos_2: DEC = -37.6229723D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.5 +/- 1 ! targnum: 723 name_1: 720-REF descr_1: J,701 pos_1: RA = 223.5876484D +/- .0008D, pos_2: DEC = -37.7869645D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.47 +/- 1 ! targnum: 724 name_1: 721-REF descr_1: J,701 pos_1: RA = 223.5888484D +/- .0008D, pos_2: DEC = -37.8551845D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.73 +/- 1 ! targnum: 725 name_1: 722-REF descr_1: J,701 pos_1: RA = 223.6193884D +/- .0008D, pos_2: DEC = -37.6685045D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.05 +/- 1 ! targnum: 726 name_1: POINT1451-375INCA221-102 descr_1: J,701,707 pos_1: RA = 223.8587999D +/- .0008D, pos_2: DEC = -37.7955312D +/- .0008D equinox: 2000 ! targnum: 727 name_1: 1451-375INCA221-102 descr_1: E pos_1: RA = 223.6136527D +/- .0008D, pos_2: DEC = -37.7925231D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.7 +/- 1 ! targnum: 728 name_1: INCA221-102 descr_1: A pos_1: RA = 223.6760556D +/- .0008D, pos_2: DEC = -37.9379003D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.7 +/- 1 ! targnum: 729 name_1: 740-REF descr_1: J,701 pos_1: RA = 223.5876484D +/- .0008D, pos_2: DEC = -37.7869645D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.47 +/- 1 ! targnum: 730 name_1: 741-REF descr_1: J,701 pos_1: RA = 223.5888484D +/- .0008D, pos_2: DEC = -37.8551845D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.73 +/- 1 ! targnum: 731 name_1: 742-REF descr_1: J,701 pos_1: RA = 223.6556283D +/- .0008D, pos_2: DEC = -37.9130245D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.18 +/- 1 ! targnum: 732 name_1: POINT1641+399INCA221-167 descr_1: J,701,707 pos_1: RA = 251.0070896D +/- .0008D, pos_2: DEC = 39.7310631D +/- .0008D equinox: 2000 ! targnum: 733 name_1: 1641+399INCA221-167 descr_1: E pos_1: RA = 250.7446808D +/- .0008D, pos_2: DEC = 39.8102191D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.9 +/- 1 ! targnum: 734 name_1: INCA221-167 descr_1: A pos_1: RA = 250.9089554D +/- .0008D, pos_2: DEC = 39.9180021D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.8 +/- 1 ! targnum: 735 name_1: 840-REF descr_1: J,701 pos_1: RA = 250.8435185D +/- .0008D, pos_2: DEC = 39.8621125D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.83 +/- 1 ! targnum: 736 name_1: 841-REF descr_1: J,701 pos_1: RA = 250.8252185D +/- .0008D, pos_2: DEC = 39.8888225D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.14 +/- 1 ! targnum: 737 name_1: 842-REF descr_1: J,701 pos_1: RA = 250.7903384D +/- .0008D, pos_2: DEC = 39.8083425D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.4 +/- 1 ! targnum: 738 name_1: POINT1656+053INCA221-111 descr_1: J,701,707 pos_1: RA = 254.4969122D +/- .0008D, pos_2: DEC = 5.0956711D +/- .0008D equinox: 2000 ! targnum: 739 name_1: 1656+053INCA221-111 descr_1: E pos_1: RA = 254.6393557D +/- .0008D, pos_2: DEC = 5.2544145D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 740 name_1: INCA221-111 descr_1: A pos_1: RA = 254.3821232D +/- .0008D, pos_2: DEC = 5.2744622D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11 +/- 1 ! targnum: 741 name_1: 920-REF descr_1: J,701 pos_1: RA = 254.4154531D +/- .0008D, pos_2: DEC = 5.302662D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.33 +/- 1 ! targnum: 742 name_1: 921-REF descr_1: J,701 pos_1: RA = 254.6304331D +/- .0008D, pos_2: DEC = 5.237162D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.18 +/- 1 ! targnum: 743 name_1: 922-REF descr_1: J,701 pos_1: RA = 254.5862031D +/- .0008D, pos_2: DEC = 5.268862D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.81 +/- 1 ! targnum: 744 name_1: POINT1656+053INCA221-113 descr_1: J,701,707 pos_1: RA = 254.8182799D +/- .0008D, pos_2: DEC = 5.1767120D +/- .0008D equinox: 2000 ! targnum: 745 name_1: 1656+053INCA221-113 descr_1: E pos_1: RA = 254.6393557D +/- .0008D, pos_2: DEC = 5.2544145D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 746 name_1: INCA221-113 descr_1: A pos_1: RA = 254.6623163D +/- .0008D, pos_2: DEC = 5.0502141D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.9 +/- 1 ! targnum: 747 name_1: 940-REF descr_1: J,701 pos_1: RA = 254.6304331D +/- .0008D, pos_2: DEC = 5.237162D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.18 +/- 1 ! targnum: 748 name_1: 941-REF descr_1: J,701 pos_1: RA = 254.6381631D +/- .0008D, pos_2: DEC = 5.045342D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.09 +/- 1 ! targnum: 749 name_1: 942-REF descr_1: J,701 pos_1: RA = 254.6272731D +/- .0008D, pos_2: DEC = 5.142002D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.43 +/- 1 ! targnum: 750 name_1: POINT1727+502INCA221-114 descr_1: J,701,707 pos_1: RA = 262.0403592D +/- .0008D, pos_2: DEC = 50.4358168D +/- .0008D equinox: 2000 ! targnum: 751 name_1: 1727+502INCA221-114 descr_1: E pos_1: RA = 262.0770535D +/- .0008D, pos_2: DEC = 50.2195018D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 752 name_1: INCA221-114 descr_1: A pos_1: RA = 261.7961111D +/- .0008D, pos_2: DEC = 50.2834301D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.2 +/- 1 ! targnum: 753 name_1: 1020-REF descr_1: J,701 pos_1: RA = 261.8214415D +/- .0008D, pos_2: DEC = 50.3209111D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.2 +/- 1 ! targnum: 754 name_1: 1021-REF descr_1: J,701 pos_1: RA = 261.9011315D +/- .0008D, pos_2: DEC = 50.2818411D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.2 +/- 1 ! targnum: 755 name_1: 1022-REF descr_1: J,701 pos_1: RA = 262.1027615D +/- .0008D, pos_2: DEC = 50.243281D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.13 +/- 1 ! targnum: 756 name_1: POINT1727+502INCA221-115 descr_1: J,701,707 pos_1: RA = 262.3684967D +/- .0008D, pos_2: DEC = 50.2772306D +/- .0008D equinox: 2000 ! targnum: 757 name_1: 1727+502INCA221-115 descr_1: E pos_1: RA = 262.0770535D +/- .0008D, pos_2: DEC = 50.2195018D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 758 name_1: INCA221-115 descr_1: A pos_1: RA = 262.1242087D +/- .0008D, pos_2: DEC = 50.164116D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: -0.002100 dec_pm_val: -0.0180 fluxnum_1: 1 fluxval_1: V=8.6 +/- 1 ! targnum: 759 name_1: 1040-REF descr_1: J,701 pos_1: RA = 262.0448715D +/- .0008D, pos_2: DEC = 50.3227911D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.25 +/- 1 ! targnum: 760 name_1: 1041-REF descr_1: J,701 pos_1: RA = 262.0657015D +/- .0008D, pos_2: DEC = 50.3208411D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.97 +/- 1 ! targnum: 761 name_1: 1042-REF descr_1: J,701 pos_1: RA = 262.0896515D +/- .0008D, pos_2: DEC = 50.184621D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.76 +/- 1 ! targnum: 762 name_1: POINT1749+701INCA221-169 descr_1: J,701,707 pos_1: RA = 267.5338660D +/- .0008D, pos_2: DEC = 69.9424271D +/- .0008D equinox: 2000 ! targnum: 763 name_1: 1749+701INCA221-169 descr_1: E pos_1: RA = 267.1364975D +/- .0008D, pos_2: DEC = 70.0972662D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=17 +/- 1 ! targnum: 764 name_1: INCA221-169 descr_1: A pos_1: RA = 267.549184D +/- .0008D, pos_2: DEC = 70.1424129D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=8.59 +/- 1 ! targnum: 765 name_1: 1140-REF descr_1: J,701 pos_1: RA = 267.3593835D +/- .0008D, pos_2: DEC = 70.1451004D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=6.18 +/- 1 ! targnum: 766 name_1: 1141-REF descr_1: J,701 pos_1: RA = 267.3042935D +/- .0008D, pos_2: DEC = 70.1052504D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.88 +/- 1 ! targnum: 767 name_1: 1142-REF descr_1: J,701 pos_1: RA = 267.0759935D +/- .0008D, pos_2: DEC = 70.1015004D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.32 +/- 1 ! targnum: 768 name_1: POINT1758-651INCA221-116 descr_1: J,701,707 pos_1: RA = 270.3285017D +/- .0008D, pos_2: DEC = -65.1303437D +/- .0008D equinox: 2000 ! targnum: 769 name_1: 1758-651INCA221-116 descr_1: E pos_1: RA = 270.8473772D +/- .0008D, pos_2: DEC = -65.1269529D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.4 +/- 1 ! targnum: 780 name_1: INCA221-116 descr_1: A pos_1: RA = 270.5030293D +/- .0008D, pos_2: DEC = -64.9222232D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.2 +/- 1 ! targnum: 781 name_1: 1220-REF descr_1: J,701 pos_1: RA = 270.848836D +/- .0008D, pos_2: DEC = -65.0943401D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=7.73 +/- 1 ! targnum: 782 name_1: 1221-REF descr_1: J,701 pos_1: RA = 270.7315961D +/- .0008D, pos_2: DEC = -65.0437801D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.47 +/- 1 ! targnum: 783 name_1: 1222-REF descr_1: J,701 pos_1: RA = 270.4913361D +/- .0008D, pos_2: DEC = -64.9435101D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.99 +/- 1 ! targnum: 784 name_1: POINT1912-550INCA221-123 descr_1: J,701,707 pos_1: RA = 288.8260812D +/- .0008D, pos_2: DEC = -54.8214285D +/- .0008D equinox: 2000 ! targnum: 785 name_1: 1912-550INCA221-123 descr_1: E pos_1: RA = 289.1630398D +/- .0008D, pos_2: DEC = -54.9134709D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 786 name_1: INCA221-123 descr_1: A pos_1: RA = 289.0882627D +/- .0008D, pos_2: DEC = -54.6779746D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.1 +/- 1 ! targnum: 787 name_1: 1320-REF descr_1: J,701 pos_1: RA = 289.0805623D +/- .0008D, pos_2: DEC = -54.6723825D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.36 +/- 1 ! targnum: 788 name_1: 1321-REF descr_1: J,701 pos_1: RA = 289.1624922D +/- .0008D, pos_2: DEC = -54.7684725D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.54 +/- 1 ! targnum: 789 name_1: 1322-REF descr_1: J,701 pos_1: RA = 289.1016823D +/- .0008D, pos_2: DEC = -54.6783725D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.53 +/- 1 ! targnum: 790 name_1: POINT1912-550INCA221-124 descr_1: J,701,707 pos_1: RA = 288.8330664D +/- .0008D, pos_2: DEC = -54.8782497D +/- .0008D equinox: 2000 ! targnum: 791 name_1: 1912-550INCA221-124 descr_1: E pos_1: RA = 289.1630398D +/- .0008D, pos_2: DEC = -54.9134709D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 792 name_1: INCA221-124 descr_1: A pos_1: RA = 289.1220997D +/- .0008D, pos_2: DEC = -54.9827729D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=8.1 +/- 1 ! targnum: 793 name_1: 1340-REF descr_1: J,701 pos_1: RA = 289.1755722D +/- .0008D, pos_2: DEC = -54.9527025D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.93 +/- 1 ! targnum: 794 name_1: 1341-REF descr_1: J,701 pos_1: RA = 289.1227721D +/- .0008D, pos_2: DEC = -54.9978825D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.85 +/- 1 ! targnum: 795 name_1: 1342-REF descr_1: J,701 pos_1: RA = 289.0868322D +/- .0008D, pos_2: DEC = -54.9827525D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.37 +/- 1 ! targnum: 796 name_1: POINT1921-293INCA221-126 descr_1: J,701,707 pos_1: RA = 291.0710318D +/- .0008D, pos_2: DEC = -29.3951981D +/- .0008D equinox: 2000 ! targnum: 797 name_1: 1921-293INCA221-126 descr_1: E pos_1: RA = 291.2123708D +/- .0008D, pos_2: DEC = -29.2419088D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=17 +/- 1 ! targnum: 798 name_1: INCA221-126 descr_1: A pos_1: RA = 291.2667164D +/- .0008D, pos_2: DEC = -29.3084684D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: 0.000200 dec_pm_val: -0.0500 fluxnum_1: 1 fluxval_1: V=5.93 +/- 1 ! targnum: 799 name_1: 1420-REF descr_1: J,701 pos_1: RA = 291.2394385D +/- .0008D, pos_2: DEC = -29.2386128D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.96 +/- 1 ! targnum: 800 name_1: 1421-REF descr_1: J,701 pos_1: RA = 291.1538985D +/- .0008D, pos_2: DEC = -29.2151428D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.3 +/- 1 ! targnum: 801 name_1: 1422-REF descr_1: J,701 pos_1: RA = 291.2832684D +/- .0008D, pos_2: DEC = -29.3166828D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.14 +/- 1 ! targnum: 802 name_1: POINT1921-293INCA221-127 descr_1: J,701,707 pos_1: RA = 291.0744246D +/- .0008D, pos_2: DEC = -29.0930327D +/- .0008D equinox: 2000 ! targnum: 803 name_1: 1921-293INCA221-127 descr_1: E pos_1: RA = 291.2123708D +/- .0008D, pos_2: DEC = -29.2419088D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=17 +/- 1 ! targnum: 804 name_1: INCA221-127 descr_1: A pos_1: RA = 291.2980009D +/- .0008D, pos_2: DEC = -29.1237405D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.6 +/- 1 ! targnum: 805 name_1: 1440-REF descr_1: J,701 pos_1: RA = 291.3086085D +/- .0008D, pos_2: DEC = -29.0682828D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.81 +/- 1 ! targnum: 806 name_1: 1441-REF descr_1: J,701 pos_1: RA = 291.2236185D +/- .0008D, pos_2: DEC = -29.2165028D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.1 +/- 1 ! targnum: 807 name_1: 1442-REF descr_1: J,701 pos_1: RA = 291.2394385D +/- .0008D, pos_2: DEC = -29.2386128D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.96 +/- 1 ! targnum: 808 name_1: POINT1928+738INCA221-128 descr_1: J,701,707 pos_1: RA = 292.3674084D +/- .0008D, pos_2: DEC = 74.1355522D +/- .0008D equinox: 2000 ! targnum: 809 name_1: 1928+738INCA221-128 descr_1: E pos_1: RA = 291.9513073D +/- .0008D, pos_2: DEC = 73.9669261D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 810 name_1: INCA221-128 descr_1: A pos_1: RA = 291.6697254D +/- .0008D, pos_2: DEC = 74.097262D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11 +/- 1 ! targnum: 811 name_1: 1520-REF descr_1: J,701 pos_1: RA = 291.6996573D +/- .0008D, pos_2: DEC = 74.1099172D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.77 +/- 1 ! targnum: 812 name_1: 1521-REF descr_1: J,701 pos_1: RA = 291.9639771D +/- .0008D, pos_2: DEC = 73.9932871D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.87 +/- 1 ! targnum: 813 name_1: 1522-REF descr_1: J,701 pos_1: RA = 291.6083573D +/- .0008D, pos_2: DEC = 74.1054072D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.9 +/- 1 ! targnum: 814 name_1: POINT1928+738INCA221-129 descr_1: J,701,707 pos_1: RA = 291.2529842D +/- .0008D, pos_2: DEC = 74.0291869D +/- .0008D equinox: 2000 ! targnum: 815 name_1: 1928+738INCA221-129 descr_1: E pos_1: RA = 291.9513073D +/- .0008D, pos_2: DEC = 73.9669261D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 816 name_1: INCA221-129 descr_1: A pos_1: RA = 291.7445536D +/- .0008D, pos_2: DEC = 73.8956271D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10 +/- 1 ! targnum: 817 name_1: 1540-REF descr_1: J,701 pos_1: RA = 291.8532871D +/- .0008D, pos_2: DEC = 73.9655472D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.99 +/- 1 ! targnum: 818 name_1: 1541-REF descr_1: J,701 pos_1: RA = 291.9639771D +/- .0008D, pos_2: DEC = 73.9932871D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.87 +/- 1 ! targnum: 819 name_1: 1542-REF descr_1: J,701 pos_1: RA = 291.5431569D +/- .0008D, pos_2: DEC = 73.8230472D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.21 +/- 1 ! targnum: 820 name_1: POINT2007+776INCA221-130 descr_1: J,701,707 pos_1: RA = 301.2676946D +/- .0008D, pos_2: DEC = 78.0588253D +/- .0008D equinox: 2000 ! targnum: 821 name_1: 2007+776INCA221-130 descr_1: E pos_1: RA = 301.3791807D +/- .0008D, pos_2: DEC = 77.8786567D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 822 name_1: INCA221-130 descr_1: A pos_1: RA = 300.6284554D +/- .0008D, pos_2: DEC = 77.9060066D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: -0.007800 dec_pm_val: 0.0250 fluxnum_1: 1 fluxval_1: V=8.55 +/- 1 ! targnum: 823 name_1: 1620-REF descr_1: J,701 pos_1: RA = 300.722723D +/- .0008D, pos_2: DEC = 77.8936761D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.15 +/- 1 ! targnum: 824 name_1: 1621-REF descr_1: J,701 pos_1: RA = 301.4946227D +/- .0008D, pos_2: DEC = 77.879146D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.44 +/- 1 ! targnum: 825 name_1: 1622-REF descr_1: J,701 pos_1: RA = 300.9300429D +/- .0008D, pos_2: DEC = 77.8966361D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.38 +/- 1 ! targnum: 826 name_1: POINT2007+776INCA221-134 descr_1: J,701,707 pos_1: RA = 302.0389715D +/- .0008D, pos_2: DEC = 78.0254847D +/- .0008D equinox: 2000 ! targnum: 827 name_1: 2007+776INCA221-134 descr_1: E pos_1: RA = 301.3791807D +/- .0008D, pos_2: DEC = 77.8786567D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 828 name_1: INCA221-134 descr_1: A pos_1: RA = 301.9930768D +/- .0008D, pos_2: DEC = 77.8248573D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: 0.005300 dec_pm_val: -0.0220 fluxnum_1: 1 fluxval_1: V=6.98 +/- 1 ! targnum: 829 name_1: 1660-REF descr_1: J,701 pos_1: RA = 301.4872626D +/- .0008D, pos_2: DEC = 77.845656D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.8 +/- 1 ! targnum: 830 name_1: 1661-REF descr_1: J,701 pos_1: RA = 301.4094527D +/- .0008D, pos_2: DEC = 77.876166D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.6 +/- 1 ! targnum: 831 name_1: 1662-REF descr_1: J,701 pos_1: RA = 302.1233923D +/- .0008D, pos_2: DEC = 77.8127859D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.36 +/- 1 ! targnum: 832 name_1: POINT2128-123INCA221-139 descr_1: J,701,707 pos_1: RA = 323.0518714D +/- .0008D, pos_2: DEC = -12.2649807D +/- .0008D equinox: 2000 ! targnum: 833 name_1: 2128-123INCA221-139 descr_1: E pos_1: RA = 322.8966014D +/- .0008D, pos_2: DEC = -12.1178749D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.5 +/- 1 ! targnum: 834 name_1: INCA221-139 descr_1: A pos_1: RA = 323.0767254D +/- .0008D, pos_2: DEC = -12.0715381D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.5 +/- 1 ! targnum: 835 name_1: 1740-REF descr_1: J,701 pos_1: RA = 322.9721515D +/- .0008D, pos_2: DEC = -12.0652761D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.41 +/- 1 ! targnum: 836 name_1: 1741-REF descr_1: J,701 pos_1: RA = 323.0800715D +/- .0008D, pos_2: DEC = -12.0799361D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.25 +/- 1 ! targnum: 837 name_1: 1742-REF descr_1: J,701 pos_1: RA = 322.9D +/- .0008D, pos_2: DEC = -12.1236761D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.22 +/- 1 ! targnum: 838 name_1: POINT2134+004INCA221-171 descr_1: J,701,707 pos_1: RA = 324.0632765D +/- .0008D, pos_2: DEC = 0.8636011D +/- .0008D equinox: 2000 ! targnum: 839 name_1: 2134+004INCA221-171 descr_1: E pos_1: RA = 324.1606656D +/- .0008D, pos_2: DEC = 0.6983314D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.8 +/- 1 ! targnum: 840 name_1: INCA221-171 descr_1: A pos_1: RA = 323.9841351D +/- .0008D, pos_2: DEC = 0.6772687D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11 +/- 1 ! targnum: 841 name_1: 1820-REF descr_1: J,701 pos_1: RA = 324.0105425D +/- .0008D, pos_2: DEC = 0.6589838D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.17 +/- 1 ! targnum: 842 name_1: 1821-REF descr_1: J,701 pos_1: RA = 324.1873825D +/- .0008D, pos_2: DEC = 0.6788938D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.15 +/- 1 ! targnum: 843 name_1: 1822-REF descr_1: J,701 pos_1: RA = 324.1130725D +/- .0008D, pos_2: DEC = 0.6541438D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.96 +/- 1 ! targnum: 844 name_1: POINT2251+158INCA221-153 descr_1: J,701,707 pos_1: RA = 343.6466889D +/- .0008D, pos_2: DEC = 16.2782925D +/- .0008D equinox: 2000 ! targnum: 845 name_1: 2251+158INCA221-153 descr_1: E pos_1: RA = 343.4903552D +/- .0008D, pos_2: DEC = 16.1482589D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.1 +/- 1 ! targnum: 846 name_1: INCA221-153 descr_1: A pos_1: RA = 343.4511631D +/- .0008D, pos_2: DEC = 16.2368027D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.3 +/- 1 ! targnum: 847 name_1: 1920-REF descr_1: J,701 pos_1: RA = 343.5453231D +/- .0008D, pos_2: DEC = 16.1149527D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.4 +/- 1 ! targnum: 848 name_1: 1921-REF descr_1: J,701 pos_1: RA = 343.4454931D +/- .0008D, pos_2: DEC = 16.2918827D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.83 +/- 1 ! targnum: 849 name_1: 1922-REF descr_1: J,701 pos_1: RA = 343.4923131D +/- .0008D, pos_2: DEC = 16.1518127D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.11 +/- 1 ! targnum: 850 name_1: POINT2251+158INCA221-154 descr_1: J,701,707 pos_1: RA = 343.7004253D +/- .0008D, pos_2: DEC = 16.1665642D +/- .0008D equinox: 2000 ! targnum: 851 name_1: 2251+158INCA221-154 descr_1: E pos_1: RA = 343.4903552D +/- .0008D, pos_2: DEC = 16.1482589D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.1 +/- 1 ! targnum: 852 name_1: INCA221-154 descr_1: A pos_1: RA = 343.5981016D +/- .0008D, pos_2: DEC = 15.9975485D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: 0.001100 dec_pm_val: -0.0170 fluxnum_1: 1 fluxval_1: V=9.4 +/- 1 ! targnum: 853 name_1: 1940-REF descr_1: J,701 pos_1: RA = 343.5989231D +/- .0008D, pos_2: DEC = 15.9837227D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.09 +/- 1 ! targnum: 854 name_1: 1941-REF descr_1: J,701 pos_1: RA = 343.6211231D +/- .0008D, pos_2: DEC = 15.9801427D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.14 +/- 1 ! targnum: 855 name_1: 1942-REF descr_1: J,701 pos_1: RA = 343.4923131D +/- .0008D, pos_2: DEC = 16.1518127D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.11 +/- 1 ! targnum: 856 name_1: POINT2254+074INCA221-155 descr_1: J,701,707 pos_1: RA = 344.2104744D +/- .0008D, pos_2: DEC = 7.9028354D +/- .0008D equinox: 2000 ! targnum: 857 name_1: 2254+074INCA221-155 descr_1: E pos_1: RA = 344.3218398D +/- .0008D, pos_2: DEC = 7.7201408D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 858 name_1: INCA221-155 descr_1: A pos_1: RA = 344.0757866D +/- .0008D, pos_2: DEC = 7.7383369D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.5 +/- 1 ! targnum: 859 name_1: 2020-REF descr_1: J,701 pos_1: RA = 344.1888927D +/- .0008D, pos_2: DEC = 7.6905827D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.36 +/- 1 ! targnum: 860 name_1: 2021-REF descr_1: J,701 pos_1: RA = 344.1796127D +/- .0008D, pos_2: DEC = 7.7305027D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.32 +/- 1 ! targnum: 861 name_1: 2022-REF descr_1: J,701 pos_1: RA = 344.3229727D +/- .0008D, pos_2: DEC = 7.7404327D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.62 +/- 1 ! targnum: 862 name_1: POINT2254+074INCA221-157 descr_1: J,701,707 pos_1: RA = 344.5129966D +/- .0008D, pos_2: DEC = 7.6657216D +/- .0008D equinox: 2000 ! targnum: 863 name_1: 2254+074INCA221-157 descr_1: E pos_1: RA = 344.3218398D +/- .0008D, pos_2: DEC = 7.7201408D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.5 +/- 1 ! targnum: 864 name_1: INCA221-157 descr_1: A pos_1: RA = 344.3178577D +/- .0008D, pos_2: DEC = 7.613441D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: -0.002800 dec_pm_val: -0.0130 fluxnum_1: 1 fluxval_1: V=9.64 +/- 1 ! targnum: 865 name_1: 2040-REF descr_1: J,701 pos_1: RA = 344.3401627D +/- .0008D, pos_2: DEC = 7.5616527D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.05 +/- 1 ! targnum: 866 name_1: 2041-REF descr_1: J,701 pos_1: RA = 344.3019127D +/- .0008D, pos_2: DEC = 7.6251627D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.49 +/- 1 ! targnum: 867 name_1: 2042-REF descr_1: J,701 pos_1: RA = 344.3229727D +/- .0008D, pos_2: DEC = 7.7404327D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=12.62 +/- 1 ! targnum: 868 name_1: POINT2255-282INCA221-158 descr_1: J,701,707 pos_1: RA = 344.4491297D +/- .0008D, pos_2: DEC = -28.1715177D +/- .0008D equinox: 2000 ! targnum: 869 name_1: 2255-282INCA221-158 descr_1: E pos_1: RA = 344.5244027D +/- .0008D, pos_2: DEC = -27.9725399D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.8 +/- 1 ! targnum: 870 name_1: INCA221-158 descr_1: A pos_1: RA = 344.4276752D +/- .0008D, pos_2: DEC = -27.9662241D +/- .0008D, equinox: 2000 pm_or_par: Y ra_pm_val: 0.003900 dec_pm_val: 0.0010 fluxnum_1: 1 fluxval_1: V=7.7 +/- 1 ! targnum: 871 name_1: 2140-REF descr_1: J,701 pos_1: RA = 344.5935614D +/- .0008D, pos_2: DEC = -28.0073474D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13 +/- 1 ! targnum: 872 name_1: 2141-REF descr_1: J,701 pos_1: RA = 344.5599314D +/- .0008D, pos_2: DEC = -27.9990974D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=10.6 +/- 1 ! targnum: 873 name_1: 2142-REF descr_1: J,701 pos_1: RA = 344.2906613D +/- .0008D, pos_2: DEC = -27.9986873D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.03 +/- 1 ! targnum: 874 name_1: POINT2300-683INCA221-159 descr_1: J,701,707 pos_1: RA = 345.5155729D +/- .0008D, pos_2: DEC = -68.2581121D +/- .0008D equinox: 2000 ! targnum: 875 name_1: 2300-683INCA221-159 descr_1: E pos_1: RA = 345.9335658D +/- .0008D, pos_2: DEC = -68.1268918D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.4 +/- 1 ! targnum: 876 name_1: INCA221-159 descr_1: A pos_1: RA = 346.0170488D +/- .0008D, pos_2: DEC = -68.3476246D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=8.7 +/- 1 ! targnum: 877 name_1: 2220-REF descr_1: J,701 pos_1: RA = 346.0694878D +/- .0008D, pos_2: DEC = -68.2589174D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.17 +/- 1 ! targnum: 878 name_1: 2221-REF descr_1: J,701 pos_1: RA = 346.0170488D +/- .0008D, pos_2: DEC = -68.3476246D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=8.7 +/- 1 ! targnum: 879 name_1: 2222-REF descr_1: J,701 pos_1: RA = 346.0346878D +/- .0008D, pos_2: DEC = -68.3651574D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.29 +/- 1 ! targnum: 880 name_1: POINT2300-683INCA221-160 descr_1: J,701,707 pos_1: RA = 346.5253179D +/- .0008D, pos_2: DEC = -68.0869396D +/- .0008D equinox: 2000 ! targnum: 881 name_1: 2300-683INCA221-160 descr_1: E pos_1: RA = 345.9335658D +/- .0008D, pos_2: DEC = -68.1268918D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.4 +/- 1 ! targnum: 882 name_1: INCA221-160 descr_1: A pos_1: RA = 346.1956071D +/- .0008D, pos_2: DEC = -67.9037957D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.4 +/- 1 ! targnum: 883 name_1: 2240-REF descr_1: J,701 pos_1: RA = 346.273688D +/- .0008D, pos_2: DEC = -67.8917274D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.16 +/- 1 ! targnum: 884 name_1: 2241-REF descr_1: J,701 pos_1: RA = 346.1828179D +/- .0008D, pos_2: DEC = -67.9185474D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=14.22 +/- 1 ! targnum: 885 name_1: 2242-REF descr_1: J,701 pos_1: RA = 346.0462879D +/- .0008D, pos_2: DEC = -68.1005774D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=13.8 +/- 1 ! targnum: 886 name_1: POINT2300-683INCA221-175 descr_1: J,701,707 pos_1: RA = 345.5868971D +/- .0008D, pos_2: DEC = -68.3061129D +/- .0008D equinox: 2000 ! targnum: 887 name_1: 2300-683INCA221-175 descr_1: E pos_1: RA = 345.9335658D +/- .0008D, pos_2: DEC = -68.1268918D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=16.4 +/- 1 ! targnum: 888 name_1: INCA221-175 descr_1: A pos_1: RA = 346.1548434D +/- .0008D, pos_2: DEC = -68.3791249D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=9.2 +/- 1 ! targnum: 889 name_1: 2260-REF descr_1: J,701 pos_1: RA = 346.1884879D +/- .0008D, pos_2: DEC = -68.3398774D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=11.99 +/- 1 ! targnum: 890 name_1: 2261-REF descr_1: J,701 pos_1: RA = 346.0694878D +/- .0008D, pos_2: DEC = -68.2589174D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.17 +/- 1 ! targnum: 891 name_1: 2262-REF descr_1: J,701 pos_1: RA = 346.0346878D +/- .0008D, pos_2: DEC = -68.3651574D +/- .0008D, equinox: 2000 fluxnum_1: 1 fluxval_1: V=15.29 +/- 1 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 12.000 targname: POINT1206-399INCA221-77 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 52.48D +/- .3D; req_2: SEQ 12-12.011 NO GAP; req_3: SAME POS FOR 12.001-12.011 AS 12; req_4: CYCLE 3 / 12-12.011; req_5: COND IF POS MODE ASTROMETRY OPERATIONAL req_6: / 12-226.011 comment_1: NEAR JD2449467.17 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 12.001 targname: 1206-399INCA221-77 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 12.002 targname: 120-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.003 targname: 121-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.004 targname: 122-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.005 targname: INCA221-77 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.006 targname: 1206-399INCA221-77 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.007 targname: INCA221-77 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.008 targname: 122-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.009 targname: 121-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 12.010 targname: 120-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 12.011 targname: 1206-399INCA221-77 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 14.000 targname: POINT1206-399INCA221-78 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 106.82D +/- .3D; req_2: SEQ 14-14.011 NO GAP; req_3: SAME POS FOR 14.001-14.011 AS 14; req_4: CYCLE 3 / 14-14.011 comment_1: NEAR JD2449524.9 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 14.001 targname: 1206-399INCA221-78 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 14.002 targname: 140-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 14.003 targname: 141-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 14.004 targname: 142-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 14.005 targname: INCA221-78 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 14.006 targname: 1206-399INCA221-78 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 14.007 targname: INCA221-78 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 14.008 targname: 142-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 14.009 targname: 141-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 14.010 targname: 140-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 14.011 targname: 1206-399INCA221-78 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.000 targname: POINT1211+334INCA221-80 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 246.94D +/- .3D; req_2: SEQ 22-22.011 NO GAP; req_3: SAME POS FOR 22.001-22.011 AS 22; req_4: CYCLE 3 / 22-22.011 comment_1: NEAR JD2449398.01 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 22.001 targname: 1211+334INCA221-80 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 22.002 targname: 220-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.003 targname: 221-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.004 targname: 222-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.005 targname: INCA221-80 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 22.006 targname: 1211+334INCA221-80 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.007 targname: INCA221-80 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.008 targname: 222-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.009 targname: 221-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.010 targname: 220-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 22.011 targname: 1211+334INCA221-80 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.000 targname: POINT1219+285INCA221-82 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 142.35D +/- .3D; req_2: SEQ 32-32.011 NO GAP; req_3: SAME POS FOR 32.001-32.011 AS 32; req_4: CYCLE 3 / 32-32.011 comment_1: NEAR JD2449469.98 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 32.001 targname: 1219+285INCA221-82 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 32.002 targname: 320-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.003 targname: 321-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 32.004 targname: 322-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.005 targname: INCA221-82 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.006 targname: 1219+285INCA221-82 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.007 targname: INCA221-82 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.008 targname: 322-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.009 targname: 321-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.010 targname: 320-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 32.011 targname: 1219+285INCA221-82 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.000 targname: POINT1404+286INCA221-92 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 101.23D +/- .3D; req_2: SEQ 42-42.011 NO GAP; req_3: SAME POS FOR 42.001-42.011 AS 42; req_4: CYCLE 3 / 42-42.011 comment_1: NEAR JD2449201.44 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 42.001 targname: 1404+286INCA221-92 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 42.002 targname: 420-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.003 targname: 421-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.004 targname: 422-REF config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.005 targname: INCA221-92 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.006 targname: 1404+286INCA221-92 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.007 targname: INCA221-92 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.008 targname: 422-REF config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.009 targname: 421-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.010 targname: 420-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 42.011 targname: 1404+286INCA221-92 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 46.000 targname: POINT1404+286INCA221-94 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 242.33D +/- .3D; req_2: SEQ 46-46.011 NO GAP; req_3: SAME POS FOR 46.001-46.011 AS 46; req_4: CYCLE 3 / 46-46.011 comment_1: NEAR JD2449425.02 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 46.001 targname: 1404+286INCA221-94 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 46.002 targname: 460-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 46.003 targname: 461-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 46.004 targname: 462-REF config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 46.005 targname: INCA221-94 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 46.006 targname: 1404+286INCA221-94 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 46.007 targname: INCA221-94 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 46.008 targname: 462-REF config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 46.009 targname: 461-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 46.010 targname: 460-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 46.011 targname: 1404+286INCA221-94 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 54.000 targname: POINT1416+067INCA221-96 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 128.82D +/- .3D; req_2: SEQ 54-54.011 NO GAP; req_3: SAME POS FOR 54.001-54.011 AS 54; req_4: CYCLE 3 / 54-54.011 comment_1: NEAR JD2449509.19 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 54.001 targname: 1416+067INCA221-96 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 54.002 targname: 540-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 54.003 targname: 541-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 54.004 targname: 542-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 54.005 targname: INCA221-96 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 54.006 targname: 1416+067INCA221-96 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 54.007 targname: INCA221-96 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 54.008 targname: 542-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 54.009 targname: 541-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 54.010 targname: 540-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 54.011 targname: 1416+067INCA221-96 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.000 targname: POINT1418+546INCA221-97 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 198.56D +/- .3D; req_2: SEQ 62-62.011 NO GAP; req_3: SAME POS FOR 62.001-62.011 AS 62; req_4: CYCLE 3 / 62-62.011 comment_1: NEAR JD2449452.59 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 62.001 targname: 1418+546INCA221-97 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 62.002 targname: 620-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.003 targname: 621-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.004 targname: 622-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.005 targname: INCA221-97 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 62.006 targname: 1418+546INCA221-97 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.007 targname: INCA221-97 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.008 targname: 622-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.009 targname: 621-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.010 targname: 620-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 62.011 targname: 1418+546INCA221-97 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.000 targname: POINT1451-375INCA221-101 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 355.76D +/- .3D; req_2: SEQ 72-72.011 NO GAP; req_3: SAME POS FOR 72.001-72.011 AS 72; req_4: CYCLE 3 / 72-72.011 comment_1: NEAR JD2449477.3 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 72.001 targname: 1451-375INCA221-101 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 72.002 targname: 720-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.003 targname: 721-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 72.004 targname: 722-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.005 targname: INCA221-101 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.006 targname: 1451-375INCA221-101 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.007 targname: INCA221-101 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.008 targname: 722-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.009 targname: 721-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.010 targname: 720-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 72.011 targname: 1451-375INCA221-101 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 74.000 targname: POINT1451-375INCA221-102 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 336.62D +/- .3D; req_2: SEQ 74-74.011 NO GAP; req_3: SAME POS FOR 74.001-74.011 AS 74; req_4: CYCLE 3 / 74-74.011 comment_1: NEAR JD2449468.73 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 74.001 targname: 1451-375INCA221-102 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 74.002 targname: 740-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 74.003 targname: 741-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 74.004 targname: 742-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 74.005 targname: INCA221-102 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 74.006 targname: 1451-375INCA221-102 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 74.007 targname: INCA221-102 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 74.008 targname: 742-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 74.009 targname: 741-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 74.010 targname: 740-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 74.011 targname: 1451-375INCA221-102 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 84.000 targname: POINT1641+399INCA221-167 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 0S priority: 1 req_1: ORIENT 228.38D +/- .3D; req_2: SEQ 84-84.011 NO GAP; req_3: SAME POS FOR 84.001-84.011 AS 84; req_4: CYCLE 3 / 84-84.011 comment_1: NEAR JD2449462.01 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 84.001 targname: 1641+399INCA221-167 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 84.002 targname: 840-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.003 targname: 841-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.004 targname: 842-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.005 targname: INCA221-167 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.006 targname: 1641+399INCA221-167 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.007 targname: INCA221-167 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.008 targname: 842-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.009 targname: 841-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 84.010 targname: 840-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.011 targname: 1641+399INCA221-167 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.000 targname: POINT1656+053INCA221-111 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 274.76D +/- .3D; req_2: SEQ 92-92.011 NO GAP; req_3: SAME POS FOR 92.001-92.011 AS 92; req_4: CYCLE 3 / 92-92.011 comment_1: NEAR JD2449419.35 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 92.001 targname: 1656+053INCA221-111 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 92.002 targname: 920-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.003 targname: 921-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.004 targname: 922-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.005 targname: INCA221-111 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.006 targname: 1656+053INCA221-111 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.007 targname: INCA221-111 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 92.008 targname: 922-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.009 targname: 921-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.010 targname: 920-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 92.011 targname: 1656+053INCA221-111 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.000 targname: POINT1656+053INCA221-113 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 172.39D +/- .3D; req_2: SEQ 94-94.011 NO GAP; req_3: SAME POS FOR 94.001-94.011 AS 94; req_4: CYCLE 3 / 94-94.011 comment_1: NEAR JD2449514.18 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 94.001 targname: 1656+053INCA221-113 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 94.002 targname: 940-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.003 targname: 941-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.004 targname: 942-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.005 targname: INCA221-113 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 94.006 targname: 1656+053INCA221-113 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.007 targname: INCA221-113 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.008 targname: 942-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.009 targname: 941-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.010 targname: 940-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 94.011 targname: 1656+053INCA221-113 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.000 targname: POINT1727+502INCA221-114 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 110.43D +/- .3D; req_2: SEQ 102-102.011 NO GAP; req_3: SAME POS FOR 102.001-102.011 AS 102; req_4: CYCLE 3 / 102-102.011 comment_1: NEAR JD2449221.7 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 102.001 targname: 1727+502INCA221-114 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 102.002 targname: 1020-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.003 targname: 1021-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 102.004 targname: 1022-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.005 targname: INCA221-114 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.006 targname: 1727+502INCA221-114 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.007 targname: INCA221-114 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.008 targname: 1022-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.009 targname: 1021-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.010 targname: 1020-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 102.011 targname: 1727+502INCA221-114 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.000 targname: POINT1727+502INCA221-115 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 160.47D +/- .3D; req_2: SEQ 104-104.011 NO GAP; req_3: SAME POS FOR 104.001-104.011 AS 104; req_4: CYCLE 3 / 104-104.011 comment_1: NEAR JD2449172.24 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 104.001 targname: 1727+502INCA221-115 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 104.002 targname: 1040-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.003 targname: 1041-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.004 targname: 1042-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.005 targname: INCA221-115 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.006 targname: 1727+502INCA221-115 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.007 targname: INCA221-115 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.008 targname: 1042-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.009 targname: 1041-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.010 targname: 1040-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 104.011 targname: 1727+502INCA221-115 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 114.000 targname: POINT1749+701INCA221-169 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 0S priority: 1 req_1: ORIENT 245.53D +/- .3D; req_2: SEQ 114-114.011 NO GAP; req_3: SAME POS FOR 114.001-114.011 AS 114; req_4: CYCLE 3 / 114-114.011 comment_1: NEAR JD2449454.73 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 114.001 targname: 1749+701INCA221-169 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 114.002 targname: 1140-REF config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.003 targname: 1141-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.004 targname: 1142-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.005 targname: INCA221-169 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.006 targname: 1749+701INCA221-169 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.007 targname: INCA221-169 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.008 targname: 1142-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.009 targname: 1141-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 114.010 targname: 1140-REF config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.011 targname: 1749+701INCA221-169 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.000 targname: POINT1758-651INCA221-116 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT -38.29D +/- .3D; req_2: SEQ 122-122.011 NO GAP; req_3: SAME POS FOR 122.001-122.011 AS 122; req_4: CYCLE 3 / 122-122.011 comment_1: NEAR JD2449169.75 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 122.001 targname: 1758-651INCA221-116 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 122.002 targname: 1220-REF config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.003 targname: 1221-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.004 targname: 1222-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.005 targname: INCA221-116 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.006 targname: 1758-651INCA221-116 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.007 targname: INCA221-116 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 122.008 targname: 1222-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.009 targname: 1221-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.010 targname: 1220-REF config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 122.011 targname: 1758-651INCA221-116 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.000 targname: POINT1912-550INCA221-123 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 351.25D +/- .3D; req_2: SEQ 132-132.011 NO GAP; req_3: SAME POS FOR 132.001-132.011 AS 132; req_4: CYCLE 3 / 132-132.011 comment_1: NEAR JD2449173.07 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 132.001 targname: 1912-550INCA221-123 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 132.002 targname: 1320-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.003 targname: 1321-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.004 targname: 1322-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.005 targname: INCA221-123 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 132.006 targname: 1912-550INCA221-123 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.007 targname: INCA221-123 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.008 targname: 1322-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.009 targname: 1321-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.010 targname: 1320-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 132.011 targname: 1912-550INCA221-123 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 134.000 targname: POINT1912-550INCA221-124 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 19.99D +/- .3D; req_2: SEQ 134-134.011 NO GAP; req_3: SAME POS FOR 134.001-134.011 AS 134; req_4: CYCLE 3 / 134-134.011 comment_1: NEAR JD2449190.18 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 134.001 targname: 1912-550INCA221-124 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 134.002 targname: 1340-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 134.003 targname: 1341-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 134.004 targname: 1342-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 134.005 targname: INCA221-124 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 134.006 targname: 1912-550INCA221-124 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 134.007 targname: INCA221-124 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 134.008 targname: 1342-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 134.009 targname: 1341-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 134.010 targname: 1340-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 134.011 targname: 1912-550INCA221-124 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.000 targname: POINT1921-293INCA221-126 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 322.88D +/- .3D; req_2: SEQ 142-142.011 NO GAP; req_3: SAME POS FOR 142.001-142.011 AS 142; req_4: CYCLE 3 / 142-142.011 comment_1: NEAR JD2449174.88 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 142.001 targname: 1921-293INCA221-126 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 142.002 targname: 1420-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.003 targname: 1421-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.004 targname: 1422-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.005 targname: INCA221-126 config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.006 targname: 1921-293INCA221-126 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.007 targname: INCA221-126 config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.008 targname: 1422-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.009 targname: 1421-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.010 targname: 1420-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 142.011 targname: 1921-293INCA221-126 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 144.000 targname: POINT1921-293INCA221-127 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 30.59D +/- .3D; req_2: SEQ 144-144.011 NO GAP; req_3: SAME POS FOR 144.001-144.011 AS 144; req_4: CYCLE 3 / 144-144.011 comment_1: NEAR JD2449185.01 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 144.001 targname: 1921-293INCA221-127 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 144.002 targname: 1440-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 144.003 targname: 1441-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 144.004 targname: 1442-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 144.005 targname: INCA221-127 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 144.006 targname: 1921-293INCA221-127 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 144.007 targname: INCA221-127 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 144.008 targname: 1442-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 144.009 targname: 1441-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 144.010 targname: 1440-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 144.011 targname: 1921-293INCA221-127 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.000 targname: POINT1928+738INCA221-128 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 146D +/- .3D; req_2: SEQ 152-152.011 NO GAP; req_3: SAME POS FOR 152.001-152.011 AS 152; req_4: CYCLE 3 / 152-152.011 comment_1: NEAR JD2449217.49 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 152.001 targname: 1928+738INCA221-128 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 152.002 targname: 1520-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.003 targname: 1521-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.004 targname: 1522-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.005 targname: INCA221-128 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.006 targname: 1928+738INCA221-128 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.007 targname: INCA221-128 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 152.008 targname: 1522-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.009 targname: 1521-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.010 targname: 1520-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 152.011 targname: 1928+738INCA221-128 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.000 targname: POINT1928+738INCA221-129 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 31.96D +/- .3D; req_2: SEQ 154-154.011 NO GAP; req_3: SAME POS FOR 154.001-154.011 AS 154; req_4: CYCLE 3 / 154-154.011 comment_1: NEAR JD2448966 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 154.001 targname: 1928+738INCA221-129 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 154.002 targname: 1540-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.003 targname: 1541-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.004 targname: 1542-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.005 targname: INCA221-129 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 154.006 targname: 1928+738INCA221-129 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.007 targname: INCA221-129 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.008 targname: 1542-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.009 targname: 1541-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.010 targname: 1540-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 154.011 targname: 1928+738INCA221-129 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.000 targname: POINT2007+776INCA221-130 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 100.17D +/- .3D; req_2: SEQ 162-162.011 NO GAP; req_3: SAME POS FOR 162.001-162.011 AS 162; req_4: CYCLE 3 / 162-162.011 comment_1: NEAR JD2449274.51 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 162.001 targname: 2007+776INCA221-130 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 162.002 targname: 1620-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.003 targname: 1621-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 162.004 targname: 1622-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.005 targname: INCA221-130 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.006 targname: 2007+776INCA221-130 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.007 targname: INCA221-130 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.008 targname: 1622-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.009 targname: 1621-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.010 targname: 1620-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 162.011 targname: 2007+776INCA221-130 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 166.000 targname: POINT2007+776INCA221-134 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 106.38D +/- .3D; req_2: SEQ 166-166.011 NO GAP; req_3: SAME POS FOR 166.001-166.011 AS 166; req_4: CYCLE 3 / 166-166.011 comment_1: NEAR JD2448903.73 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 166.001 targname: 2007+776INCA221-134 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 166.002 targname: 1660-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 166.003 targname: 1661-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 166.004 targname: 1662-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 166.005 targname: INCA221-134 config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 166.006 targname: 2007+776INCA221-134 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 166.007 targname: INCA221-134 config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 166.008 targname: 1662-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 166.009 targname: 1661-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 166.010 targname: 1660-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 166.011 targname: 2007+776INCA221-134 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 174.000 targname: POINT2128-123INCA221-139 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 249.99D +/- .3D; req_2: SEQ 174-174.011 NO GAP; req_3: SAME POS FOR 174.001-174.011 AS 174; req_4: CYCLE 3 / 174-174.011 comment_1: NEAR JD2449519.5 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 174.001 targname: 2128-123INCA221-139 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 174.002 targname: 1740-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 174.003 targname: 1741-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 174.004 targname: 1742-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 174.005 targname: INCA221-139 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 174.006 targname: 2128-123INCA221-139 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 174.007 targname: INCA221-139 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 174.008 targname: 1742-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 174.009 targname: 1741-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 174.010 targname: 1740-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 174.011 targname: 2128-123INCA221-139 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.000 targname: POINT2134+004INCA221-171 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 0S priority: 1 req_1: ORIENT 86.85D +/- .3D; req_2: SEQ 182-182.011 NO GAP; req_3: SAME POS FOR 182.001-182.011 AS 182; req_4: CYCLE 3 / 182-182.011 comment_1: NEAR JD2449260.51 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 182.001 targname: 2134+004INCA221-171 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 182.002 targname: 1820-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.003 targname: 1821-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.004 targname: 1822-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.005 targname: INCA221-171 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.006 targname: 2134+004INCA221-171 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.007 targname: INCA221-171 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 182.008 targname: 1822-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.009 targname: 1821-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.010 targname: 1820-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.011 targname: 2134+004INCA221-171 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.000 targname: POINT2251+158INCA221-153 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 151.08D +/- .3D; req_2: SEQ 192-192.011 NO GAP; req_3: SAME POS FOR 192.001-192.011 AS 192; req_4: CYCLE 3 / 192-192.011 comment_1: NEAR JD2449246.58 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 192.001 targname: 2251+158INCA221-153 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 192.002 targname: 1920-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.003 targname: 1921-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.004 targname: 1922-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.005 targname: INCA221-153 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 192.006 targname: 2251+158INCA221-153 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.007 targname: INCA221-153 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.008 targname: 1922-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.009 targname: 1921-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.010 targname: 1920-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 192.011 targname: 2251+158INCA221-153 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.000 targname: POINT2251+158INCA221-154 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 148.1D +/- .3D; req_2: SEQ 194-194.011 NO GAP; req_3: SAME POS FOR 194.001-194.011 AS 194; req_4: CYCLE 3 / 194-194.011 comment_1: NEAR JD2449247.69 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 194.001 targname: 2251+158INCA221-154 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 194.002 targname: 1940-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.003 targname: 1941-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 194.004 targname: 1942-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.005 targname: INCA221-154 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.006 targname: 2251+158INCA221-154 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.007 targname: INCA221-154 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.008 targname: 1942-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.009 targname: 1941-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.010 targname: 1940-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 194.011 targname: 2251+158INCA221-154 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.000 targname: POINT2254+074INCA221-155 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 92.81D +/- .3D; req_2: SEQ 202-202.011 NO GAP; req_3: SAME POS FOR 202.001-202.011 AS 202; req_4: CYCLE 3 / 202-202.011 comment_1: NEAR JD2449267.83 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 202.001 targname: 2254+074INCA221-155 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 202.002 targname: 2020-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.003 targname: 2021-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.004 targname: 2022-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.005 targname: INCA221-155 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.006 targname: 2254+074INCA221-155 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.007 targname: INCA221-155 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.008 targname: 2022-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.009 targname: 2021-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.010 targname: 2020-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 202.011 targname: 2254+074INCA221-155 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 204.000 targname: POINT2254+074INCA221-157 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 178.78D +/- .3D; req_2: SEQ 204-204.011 NO GAP; req_3: SAME POS FOR 204.001-204.011 AS 204; req_4: CYCLE 3 / 204-204.011 comment_1: NEAR JD2449236.53 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 204.001 targname: 2254+074INCA221-157 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 204.002 targname: 2040-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 204.003 targname: 2041-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 204.004 targname: 2042-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 204.005 targname: INCA221-157 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 204.006 targname: 2254+074INCA221-157 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 204.007 targname: INCA221-157 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 204.008 targname: 2042-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 204.009 targname: 2041-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 204.010 targname: 2040-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 204.011 targname: 2254+074INCA221-157 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.000 targname: POINT2255-282INCA221-158 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 270.11D +/- .3D; req_2: SEQ 214-214.011 NO GAP; req_3: SAME POS FOR 214.001-214.011 AS 214; req_4: CYCLE 3 / 214-214.011 comment_1: NEAR JD2449188.53 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 214.001 targname: 2255-282INCA221-158 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 214.002 targname: 2140-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.003 targname: 2141-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.004 targname: 2142-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.005 targname: INCA221-158 config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.006 targname: 2255-282INCA221-158 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.007 targname: INCA221-158 config: FGS opmode: POS aperture: 3 sp_element: F5ND num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 214.008 targname: 2142-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.009 targname: 2141-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.010 targname: 2140-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 214.011 targname: 2255-282INCA221-158 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 222.000 targname: POINT2300-683INCA221-159 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 351.37D +/- .3D; req_2: SEQ 222-222.011 NO GAP; req_3: SAME POS FOR 222.001-222.011 AS 222; req_4: CYCLE 3 / 222-222.011 comment_1: NEAR JD2449229.01 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 222.001 targname: 2300-683INCA221-159 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 222.002 targname: 2220-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 222.003 targname: 2221-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 222.004 targname: 2222-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 222.005 targname: INCA221-159 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 222.006 targname: 2300-683INCA221-159 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 222.007 targname: INCA221-159 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 222.008 targname: 2222-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 222.009 targname: 2221-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 222.010 targname: 2220-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 222.011 targname: 2300-683INCA221-159 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.000 targname: POINT2300-683INCA221-160 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 26.76D +/- .3D; req_2: SEQ 224-224.011 NO GAP; req_3: SAME POS FOR 224.001-224.011 AS 224; req_4: CYCLE 3 / 224-224.011 comment_1: NEAR JD2449267.27 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 224.001 targname: 2300-683INCA221-160 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 224.002 targname: 2240-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.000 targname: POINT1641+399INCA221-167 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 228.38D +/- .3D; req_2: SEQ 84-84.011 NO GAP; req_3: SAME POS FOR 84.001-84.011 AS 84; req_4: CYCLE 3 / 84-84.011 comment_1: NEAR JD2449462.01 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 224.003 targname: 2241-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 224.004 targname: 2242-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.005 targname: INCA221-160 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.006 targname: 2300-683INCA221-160 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.007 targname: INCA221-160 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.008 targname: 2242-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.009 targname: 2241-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.010 targname: 2240-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 224.011 targname: 2300-683INCA221-160 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.001 targname: 1641+399INCA221-167 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 84.002 targname: 840-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.003 targname: 841-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.004 targname: 842-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.005 targname: INCA221-167 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.006 targname: 1641+399INCA221-167 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.007 targname: INCA221-167 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.008 targname: 842-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.009 targname: 841-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.010 targname: 840-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 84.011 targname: 1641+399INCA221-167 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 114.000 targname: POINT1749+701INCA221-169 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 245.53D +/- .3D; req_2: SEQ 114-114.011 NO GAP; req_3: SAME POS FOR 114.001-114.011 AS 114; req_4: CYCLE 3 / 114-114.011 comment_1: NEAR JD2449454.73 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 114.001 targname: 1749+701INCA221-169 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 114.002 targname: 1140-REF config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.003 targname: 1141-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.004 targname: 1142-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.005 targname: INCA221-169 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.006 targname: 1749+701INCA221-169 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.007 targname: INCA221-169 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.008 targname: 1142-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.009 targname: 1141-REF config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 114.010 targname: 1140-REF config: ^ opmode: ^ aperture: ^ sp_element: F5ND num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 114.011 targname: 1749+701INCA221-169 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.000 targname: POINT2134+004INCA221-171 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 86.85D +/- .3D; req_2: SEQ 182-182.011 NO GAP; req_3: SAME POS FOR 182.001-182.011 AS 182; req_4: CYCLE 3 / 182-182.011 comment_1: NEAR JD2449260.51 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 182.001 targname: 2134+004INCA221-171 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 182.002 targname: 1820-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.003 targname: 1821-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.004 targname: 1822-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.005 targname: INCA221-171 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.006 targname: 2134+004INCA221-171 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.007 targname: INCA221-171 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 182.008 targname: 1822-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.009 targname: 1821-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.010 targname: 1820-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 182.011 targname: 2134+004INCA221-171 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.000 targname: POINT2300-683INCA221-175 config: S/C opmode: POINTING aperture: V1 num_exp: 1 time_per_exp: 1S priority: 1 req_1: ORIENT 346.25D +/- .3D; req_2: SEQ 226-226.011 NO GAP; req_3: SAME POS FOR 226.001-226.011 AS 226; req_4: CYCLE 3 / 226-226.011 comment_1: NEAR JD2449224.35 comment_2: V1 AXIS AND ORIENTATION SPECIFIED TO comment_3: PUT REFERENCE STARS IN PICKLE. JDTOBS comment_4: IS THE JULIAN DATE THAT THIS comment_5: ORIENTATION IS AT NOMINAL ROLL. 180D comment_6: OPTION IS NOT ACCEPTABLE. ! linenum: 226.001 targname: 2300-683INCA221-175 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: ^ param_1: DATA-RATE = 32 ! linenum: 226.002 targname: 2260-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.003 targname: 2261-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.004 targname: 2262-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.005 targname: INCA221-175 config: FGS opmode: POS aperture: 3 sp_element: PUPIL num_exp: 1 time_per_exp: 51.2S fluxnum_1: 1 priority: 1 param_1: DATA-RATE = 32 ! linenum: 226.006 targname: 2300-683INCA221-175 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.007 targname: INCA221-175 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.008 targname: 2262-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.009 targname: 2261-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.010 targname: 2260-REF config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! linenum: 226.011 targname: 2300-683INCA221-175 config: ^ opmode: ^ aperture: ^ sp_element: PUPIL num_exp: ^ time_per_exp: ^ fluxnum_1: ^ priority: ^ param_1: ^ ! ! end of exposure logsheet ! No scan data records found