!  File:  4059C.PROP
!  Database:  PEPDB
!  Date:  20-FEB-1994:06:56:25

coverpage:

  title_1:         ABSOLUTE PHOTOMETRY MONITOR
    proposal_for:  CAL/FOS
    cont_id:       4059
    pi_fname:      RALPH
    pi_lname:      BOHLIN
    pi_inst:       STSCI
    pi_country:    USA
    pi_phone:      410-338-4804
    num_pri:       3
    fos:           Y
! end of coverpage

abstract:

    line_1:        A calibration will be performed to determine the absolute sensitivity of
    line_2:        the FOS detectors. Five spectrophotometric standard stars are available to
    line_3:        be observed in each reasonable detector-grating combination (a total of 11).
    line_4:        The data from these stars will be averaged to form the pipeline
    line_5:        response function for the FOS. The stars chosen cover a range of
    line_6:        magnitudes, and will also be used to verify the laboratory
    line_7:        paired-pulse correction.

!
! end of abstract

general_form_proposers:

  lname:           BOHLIN
    fname:         RALPH
    title:         P.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!

  lname:           NEILL
    fname:         JAMES
    title:         C.I.
    inst:          SPACE TELESCOPE SCIENCE INSTITUTE
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        In this test, we will obtain spectra of one star which is a
    line_2:        spectrophotometric standard. The star will be observed in
    line_3:        every reasonable detector-grating combination (a total of
    line_4:        11). To assure registration of the spectrum on the diode
    line_5:        array, the stars will be observed at 3 y-bases with a ~10
    line_6:        micron (actually 8 micron) separation. Observations will be
    line_7:        made with the 4.3" aperture.

!

  question:        5
    section:       1
    line_1:        SCHEDULING REQUIREMENTS:
    line_2:        Targets HZ 44, BD+28D4211 and WD0501+527 are top priority and should
    line_3:        be scheduled first.  Target BD+75D323 is middle priority and scheduled
    line_4:        next.  The lowest priority is BD+33D2642 and should be scheduled only
    line_5:        if the other targets are unavailable.
    line_7:        EXPOSURE LOGSHEET SCHEDULING EXPLANATION:
    line_8:        Out of the 5 standards, we prefer to observe high priority target that provides
    line_9:        the maximum target visibility per orbit.  This is generally WD0501+527 which
    line_10:       can get up to 60-65 min/orbit every 56 days (vs 50 min) for the other
    line_11:       targets.  As the proposal instructions indicate that SELECT'd exp log lines will
    line_12:       only be activated after the proposer has made the selection we provided
    line_13:       the target selection and timing for the most "efficient" scheduling.  This
    line_14:       assumes that the first observations will occur around day 92.160 - a little
    line_15:       ahead of the "formal" start of Cycle 2. We have also provided other
    line_16:       COND IF logsheet lines in the event that these don't work out.

!

  question:        7
    section:       1
    line_1:        Data reduction will be performed at the STScI, and the analysis will be
    line_2:        performed.  This is a calibration, so the resulting data will need to
    line_3:        be added to the PODPS pipeline.

!
!end of general form text

general_form_address:

  lname:           BOHLIN
    fname:         RALPH
    category:      PI
    inst:          STSCI
    addr_1:        3700 SAN MARTIN DRIVE
    city:          BALTIMORE
    state:         MD
    zip:           21218
    country:       USA
    phone:         410-338-4804

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        BD+33D2642
    name_2:        GSC2575-481
    descr_1:       J,702
    pos_1:         RA = 15H 51M 59.9S +/- 0.02S,
    pos_2:         DEC = +32D 56' 54.8" +/- 0.3",
    pos_3:         PLATE-ID=01RN
    equinox:       2000
    comment_1:     THE GSSS NAME IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 10.83 +/- 0.05
    fluxnum_2:     2
    fluxval_2:     B = 10.66 +/- 0.05

!

    targnum:       2
    name_1:        BD+75D325
    name_2:        GSC4380-2
    descr_1:       J,702
    pos_1:         RA = 08H 10M 49.3S +/- 0.003S,
    pos_2:         DEC = +74D 57' 57.5" +/- 0.2",
    pos_3:         PLATE-ID=00LQ
    equinox:       2000
    comment_1:     THE GSSS NAME IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 9.54 +/- 0.05
    fluxnum_2:     2
    fluxval_2:     B = 9.17 +/- 0.05

!

    targnum:       3
    name_1:        HZ-44
    name_2:        GSC2541-142
    descr_1:       J,702
    pos_1:         RA = 13H 23M 35.4S +/- 0.02S,
    pos_2:         DEC = +36D 08' 00.0" +/- 0.3",
    pos_3:         PLATE-ID=01QW
    equinox:       2000
    fluxnum_1:     1
    fluxval_1:     V = 11.71 +/- 0.05

!

    targnum:       4
    name_1:        BD+28D4211
    name_2:        GSC 2214-1198
    descr_1:       J,702
    pos_1:         RA = 21H 51M 11.1S +/- 0.01S,
    pos_2:         DEC = +28D 51' 51.8" +/- 0.2"
    equinox:       2000
    comment_1:     THE GSC NAME IS GIVEN.
    fluxnum_1:     1
    fluxval_1:     V = 10.53 +/- 0.05
    fluxnum_2:     2
    fluxval_2:     B = 10.19 +/- 0.05

!

    targnum:       5
    name_1:        WD0501+527
    name_2:        G191-B2B
    name_3:        GSSS3734-0506
    descr_1:       J,702
    pos_1:         RA=05H 05M 30.6S +/- 0.01S,
    pos_2:         DEC=+52D 49' 54.0" +/- 0.2"
    equinox:       2000
    pm_or_par:     Y
    pos_epoch_bj:  J
    pos_epoch_yr:  1983.10
    ra_pm_val:     0.000500
    ra_pm_unct:    0.000033
    dec_pm_val:    -0.0880
    dec_pm_unct:   0.0050
    comment_1:     THE GUIDE STAR CATALOG NAME
    comment_2:     IS GIVEN.
    comment_3:     DAO WHITE DWARF.
    fluxnum_1:     1
    fluxval_1:     V = 11.78 +/- 0.02
    fluxnum_2:     2
    fluxval_2:     B = 11.44 +/- 0.02
    fluxnum_3:     3
    fluxval_3:     U = 10.24 +/- 0.02

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       16.500
    sequence_1:    DEFINE
    sequence_2:    BD33-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 17;

!

    linenum:       17.000
    sequence_1:    DEFINE
    sequence_2:    BD33-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  0.25S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 17.1;
    req_2:         SPATIAL SCAN;

!

    linenum:       17.100
    sequence_1:    DEFINE
    sequence_2:    BD33-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  0.43S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2
    req_1:         ONBOARD ACQ FOR 18-25;

!

    linenum:       18.000
    sequence_1:    DEFINE
    sequence_2:    BD33-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  531S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.442
    req_1:         SEQ 18-25 NO GAP;

!

    linenum:       21.000
    sequence_1:    DEFINE
    sequence_2:    BD33-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  160S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.333

!

    linenum:       22.000
    sequence_1:    DEFINE
    sequence_2:    BD33-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  76S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.313

!

    linenum:       24.000
    sequence_1:    DEFINE
    sequence_2:    BD33-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  90S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.375

!

    linenum:       25.000
    sequence_1:    DEFINE
    sequence_2:    BD33-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  7S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.117

!

    linenum:       25.500
    sequence_1:    DEFINE
    sequence_2:    BD33-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 26;

!

    linenum:       26.000
    sequence_1:    DEFINE
    sequence_2:    BD33-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  0.25S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 26.1;
    req_2:         SPATIAL SCAN;

!

    linenum:       26.100
    sequence_1:    DEFINE
    sequence_2:    BD33-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  0.43S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2
    req_1:         ONBOARD ACQ FOR 27-32;

!

    linenum:       27.000
    sequence_1:    DEFINE
    sequence_2:    BD33-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  371S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.618
    req_1:         SEQ 27-32 NO GAP;

!

    linenum:       28.000
    sequence_1:    DEFINE
    sequence_2:    BD33-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.333

!

    linenum:       29.000
    sequence_1:    DEFINE
    sequence_2:    BD33-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  55S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.458

!

    linenum:       30.000
    sequence_1:    DEFINE
    sequence_2:    BD33-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  8S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.133

!

    linenum:       31.000
    sequence_1:    DEFINE
    sequence_2:    BD33-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  55S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.458

!

    linenum:       32.000
    sequence_1:    DEFINE
    sequence_2:    BD33-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.333
    comment_1:     SEQUENCE FOR BD+33 2642.

!

    linenum:       35.500
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 36;

!

    linenum:       36.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  0.25S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 36.1;
    req_2:         SPATIAL SCAN;

!

    linenum:       36.100
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  0.43S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2
    req_1:         ONBOARD ACQ FOR 37-42;

!

    linenum:       37.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  371S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.618
    req_1:         SEQ 37-42 NO GAP;

!

    linenum:       38.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.333

!

    linenum:       39.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  55S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.458

!

    linenum:       40.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  8S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.133

!

    linenum:       41.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  55S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.458

!

    linenum:       42.000
    sequence_1:    DEFINE
    sequence_2:    BD28-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  200S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.333

!

    linenum:       50.500
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 51;

!

    linenum:       51.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  0.07S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 51.1;
    req_2:         SPATIAL SCAN;

!

    linenum:       51.100
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  0.44S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2
    req_1:         ONBOARD ACQ FOR 52-59;

!

    linenum:       52.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  531S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.442
    req_1:         SEQ 52-59 NO GAP;

!

    linenum:       55.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       56.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.133

!

    linenum:       58.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  80S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.133

!

    linenum:       59.000
    sequence_1:    DEFINE
    sequence_2:    BD28-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  2.7S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.045,
    comment_1:     SEQUENCE FOR BD+28D4211.

!

    linenum:       64.500
    sequence_1:    DEFINE
    sequence_2:    HZ-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 65;

!

    linenum:       65.000
    sequence_1:    DEFINE
    sequence_2:    HZ-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  0.25S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 65.1;
    req_2:         SPATIAL SCAN;

!

    linenum:       65.100
    sequence_1:    DEFINE
    sequence_2:    HZ-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  0.48S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2
    req_1:         ONBOARD ACQ FOR 66-73;

!

    linenum:       66.000
    sequence_1:    DEFINE
    sequence_2:    HZ-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  1466S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 66-73 NO GAP;

!

    linenum:       69.000
    sequence_1:    DEFINE
    sequence_2:    HZ-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  375S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.622

!

    linenum:       70.000
    sequence_1:    DEFINE
    sequence_2:    HZ-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  160S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.266

!

    linenum:       72.000
    sequence_1:    DEFINE
    sequence_2:    HZ-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  215S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.355

!

    linenum:       73.000
    sequence_1:    DEFINE
    sequence_2:    HZ-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  7S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.111

!

    linenum:       73.500
    sequence_1:    DEFINE
    sequence_2:    HZ-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 74;

!

    linenum:       74.000
    sequence_1:    DEFINE
    sequence_2:    HZ-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  0.30S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 74.1;
    req_2:         SPATIAL SCAN;

!

    linenum:       74.100
    sequence_1:    DEFINE
    sequence_2:    HZ-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  0.61S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2
    req_1:         ONBOARD ACQ FOR 75-80;

!

    linenum:       75.000
    sequence_1:    DEFINE
    sequence_2:    HZ-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  135S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.450
    req_1:         SEQ 75-80 NO GAP;

!

    linenum:       76.000
    sequence_1:    DEFINE
    sequence_2:    HZ-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  330S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.550

!

    linenum:       77.000
    sequence_1:    DEFINE
    sequence_2:    HZ-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  30S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       78.000
    sequence_1:    DEFINE
    sequence_2:    HZ-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  13S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.216

!

    linenum:       79.000
    sequence_1:    DEFINE
    sequence_2:    HZ-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  60S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       80.000
    sequence_1:    DEFINE
    sequence_2:    HZ-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  90S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    comment_1:     SEQUENCE FOR HZ-44.

!

    linenum:       84.500
    sequence_1:    DEFINE
    sequence_2:    WD-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 85;

!

    linenum:       85.000
    sequence_1:    DEFINE
    sequence_2:    WD-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  0.25S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 85.1;
    req_2:         SPATIAL SCAN;

!

    linenum:       85.100
    sequence_1:    DEFINE
    sequence_2:    WD-R
    targname:      #
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  0.48S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2
    req_1:         ONBOARD ACQ FOR 86-93;

!

    linenum:       86.000
    sequence_1:    DEFINE
    sequence_2:    WD-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  1466S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    req_1:         SEQ 86-93 NO GAP;

!

    linenum:       89.000
    sequence_1:    DEFINE
    sequence_2:    WD-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  480S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.622

!

    linenum:       90.000
    sequence_1:    DEFINE
    sequence_2:    WD-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  240S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.266

!

    linenum:       92.000
    sequence_1:    DEFINE
    sequence_2:    WD-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  240S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.355

!

    linenum:       93.000
    sequence_1:    DEFINE
    sequence_2:    WD-R
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  10S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.111

!

    linenum:       93.500
    sequence_1:    DEFINE
    sequence_2:    WD-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 94;

!

    linenum:       94.000
    sequence_1:    DEFINE
    sequence_2:    WD-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  0.30S
    fluxnum_1:     1
    priority:      1
    req_1:         ONBOARD ACQ FOR 94.1;
    req_2:         SPATIAL SCAN;

!

    linenum:       94.100
    sequence_1:    DEFINE
    sequence_2:    WD-B
    targname:      #
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  0.61S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2
    req_1:         ONBOARD ACQ FOR 95-100;

!

    linenum:       95.000
    sequence_1:    DEFINE
    sequence_2:    WD-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  480S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.450
    req_1:         SEQ 95-100 NO GAP;

!

    linenum:       96.000
    sequence_1:    DEFINE
    sequence_2:    WD-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  480S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.550

!

    linenum:       97.000
    sequence_1:    DEFINE
    sequence_2:    WD-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       98.000
    sequence_1:    DEFINE
    sequence_2:    WD-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    PRISM
    num_exp:       1
    time_per_exp:  20S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.216

!

    linenum:       99.000
    sequence_1:    DEFINE
    sequence_2:    WD-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF

!

    linenum:       100.000
    sequence_1:    DEFINE
    sequence_2:    WD-B
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  120S
    s_to_n:        60
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF
    comment_1:     SEQUENCE FOR WD0501+527.

!

    linenum:       131.000
    sequence_1:    DEFINE
    sequence_2:    BD75-R-43
    targname:      BD+75D325
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 132;
    comment_1:     THIS IS MIDDLE PRIORITY TARGET.

!

    linenum:       132.000
    sequence_1:    DEFINE
    sequence_2:    BD75-R-43
    targname:      BD+75D325
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  0.25S
    fluxnum_1:     1
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 133;

!

    linenum:       133.000
    sequence_1:    DEFINE
    sequence_2:    BD75-R-43
    targname:      BD+75D325
    config:        FOS/RD
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  0.45S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2,
    req_1:         ONBOARD ACQ FOR 134-140;

!

    linenum:       134.000
    sequence_1:    DEFINE
    sequence_2:    BD75-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G780H
    num_exp:       1
    time_per_exp:  355S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.493,
    req_1:         SEQ 134-140 NO GAP;

!

    linenum:       137.000
    sequence_1:    DEFINE
    sequence_2:    BD75-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  84S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.700

!

    linenum:       138.000
    sequence_1:    DEFINE
    sequence_2:    BD75-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  36S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.600

!

    linenum:       140.000
    sequence_1:    DEFINE
    sequence_2:    BD75-R-43
    targname:      #
    config:        FOS/RD
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G650L
    num_exp:       1
    time_per_exp:  48S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.800

!

    linenum:       141.000
    sequence_1:    DEFINE
    sequence_2:    BD75-B-43
    targname:      BD+75D325
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      4.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  1S
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 142;
    comment_1:     THIS IS MIDDLE PRIORITY TARGET.

!

    linenum:       142.000
    sequence_1:    DEFINE
    sequence_2:    BD75-B-43
    targname:      BD+75D325
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      1.0
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  0.25S
    fluxnum_1:     1
    priority:      1
    req_1:         SPATIAL SCAN;
    req_2:         ONBOARD ACQ FOR 142.5;

!

    linenum:       142.500
    sequence_1:    DEFINE
    sequence_2:    BD75-B-43
    targname:      BD+75D325
    config:        FOS/BL
    opmode:        ACQ/PEAK
    aperture:      0.3
    sp_element:    G570H
    num_exp:       1
    time_per_exp:  0.45S
    fluxnum_1:     1
    priority:      1
    param_1:       SEARCH-SIZE=5,
    param_2:       SCAN-STEP=0.2,
    req_1:         ONBOARD ACQ FOR 143-148;

!

    linenum:       143.000
    sequence_1:    DEFINE
    sequence_2:    BD75-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G130H
    num_exp:       1
    time_per_exp:  24S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.400
    req_1:         SEQ 143-148 NO GAP;

!

    linenum:       144.000
    sequence_1:    DEFINE
    sequence_2:    BD75-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G400H
    num_exp:       1
    time_per_exp:  70S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.583

!

    linenum:       145.000
    sequence_1:    DEFINE
    sequence_2:    BD75-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G160L
    num_exp:       1
    time_per_exp:  6S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.100

!

    linenum:       147.000
    sequence_1:    DEFINE
    sequence_2:    BD75-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G270H
    num_exp:       1
    time_per_exp:  12S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.20,

!

    linenum:       148.000
    sequence_1:    DEFINE
    sequence_2:    BD75-B-43
    targname:      #
    config:        FOS/BL
    opmode:        IMAGE
    aperture:      4.3
    sp_element:    G190H
    num_exp:       1
    time_per_exp:  24S
    s_to_n:        75
    fluxnum_1:     1
    priority:      1
    param_1:       SUB-STEP=4,
    param_2:       Y-SIZE=3,
    param_3:       Y-SPACE=21.4,
    param_4:       COMB=YES,
    param_5:       Y=DEF,
    param_6:       STEP-TIME=0.400
    comment_1:     SEQUENCE FOR BD+75 325.

!

    linenum:       200.000
    sequence_1:    USE
    sequence_2:    BD28-B
    targname:      BD+28D4211
    req_1:         GROUP 200-201 WITHIN 7D;
    req_2:         CYCLE 2 / 200-801;
    comment_1:     THIS IS A TOP PRIORITY TARGET.

!

    linenum:       201.000
    sequence_1:    USE
    sequence_2:    BD28-R
    targname:      BD+28D4211
    comment_1:     THIS IS A TOP PRIORITY TARGET

!

    linenum:       210.000
    sequence_1:    USE
    sequence_2:    WD-B
    targname:      WD0501+527
    req_1:         AFTER 201 BY 60D;
    req_2:         GROUP 210-211 WITHIN 7D;
    comment_1:     TARGET SELECTIONS HAVE BEEN MADE
    comment_2:     BASED ON TARGET VISIBILITY. PREFER
    comment_3:     OBSERVING WHEN TARGET AT MAX VISIB/
    comment_4:     ORBIT.

!

    linenum:       211.000
    sequence_1:    USE
    sequence_2:    WD-R
    targname:      WD0501+527
    comment_1:     THIS IS A TOP PRIORITY TARGET.

!

    linenum:       220.000
    sequence_1:    USE
    sequence_2:    WD-B
    targname:      WD0501+527
    req_1:         AFTER 210 BY 45D;
    req_2:         GROUP 220-221 WITHIN 7D;
    comment_1:     THIS IS A TOP PRIORITY TARGET.

!

    linenum:       221.000
    sequence_1:    USE
    sequence_2:    WD-R
    targname:      WD0501+527
    comment_1:     THIS IS A TOP PRIORITY TARGET.

!

    linenum:       230.000
    sequence_1:    USE
    sequence_2:    HZ-B
    targname:      HZ-44
    req_1:         AFTER 220 BY 75D;
    req_2:         GROUP 230-231 WITHIN 7D;
    comment_1:     THIS IS A TOP PRIORITY TARGET.

!

    linenum:       231.000
    sequence_1:    USE
    sequence_2:    HZ-R
    targname:      HZ-44
    comment_1:     THIS IS A TOP PRIORITY TARGET.

!

    linenum:       240.000
    sequence_1:    USE
    sequence_2:    WD-B
    targname:      WD0501+527
    req_1:         AFTER 230 BY 75D;
    req_2:         GROUP 240-241 WITHIN 7D;
    comment_1:     THIS IS A TOP PRIORITY TARGET.

!

    linenum:       241.000
    sequence_1:    USE
    sequence_2:    WD-R
    targname:      WD0501+527
    comment_1:     THIS IS A TOP PRIORITY TARGET.

!

    linenum:       500.000
    sequence_1:    USE
    sequence_2:    BD75-B-43
    targname:      BD+75D325
    req_1:         COND IF OTHER TARGETS
    req_2:         NOT AVAILABLE/500-501;
    req_3:         GROUP 500-501 WITHIN 7D;
    comment_1:     THIS IS MIDDLE PRIORITY TARGET.
    comment_2:     EXP LOG LINES PROVIDED IN THE
    comment_3:     EVENT THAT OTHER TARGETS DON'T
    comment_4:     WORK OUT.

!

    linenum:       501.000
    sequence_1:    USE
    sequence_2:    BD75-R-43
    targname:      BD+75D325
    comment_1:     THIS IS MIDDLE PRIORITY TARGET.

!

    linenum:       800.000
    sequence_1:    USE
    sequence_2:    BD33-B
    targname:      BD+33D2642
    req_1:         COND IF NO OTHER TARGET
    req_2:         AVAILABLE/800-801;
    req_3:         GROUP 800-801 WITHIN 7D;
    comment_1:     THIS IS A LOW PRIORITY TARGET.
    comment_2:     EXP LOG LINES PROVIDED IN THE
    comment_3:     EVENT THAT OTHER TARGETS DON'T
    comment_4:     WORK OUT.

!

    linenum:       801.000
    sequence_1:    USE
    sequence_2:    BD33-R
    targname:      BD+33D2642
    comment_1:     THIS IS A LOW PRIORITY TARGET.

!
! end of exposure logsheet

scan_data:

    line_list:     16.5,25.5,35.5,50.5,64.5,73.5,84.5,93.5,141.0,131.0
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    3
    dwell_secs:       1.00
    scan_width:       0.0000
    scan_length:      2.8000
    sides_angle:    90.0000
    number_lines:  1
    scan_rate:       0.0000
    first_line_pa:   0.0000
    scan_frame:    S/C
    len_offset:    1.4
    wid_offset:    0.0

!

    line_list:     17.0,26.0,36.0,51.0,65.0,74.0,85.0,94.0,142.0,132.0
    fgs_scan:
    cont_dwell:    D
    dwell_pnts:    6
    dwell_secs:       1.00
    scan_width:       0.7000
    scan_length:      3.5000
    sides_angle:    90.0000
    number_lines:  2
    scan_rate:       0.0000
    first_line_pa:  90.0000
    scan_frame:    S/C
    len_offset:    1.75
    wid_offset:    0.35

!
! end of scan data