! File: 4049C.PROP ! Database: PEPDB ! Date: 20-FEB-1994:06:33:10 coverpage: title_1: FOC/48 IMAGE STABILITY VERIFICATION- (NEW HOLD MODE) proposal_for: CAL/FOC pi_fname: MANFRED pi_lname: MIEBACH pi_inst: STSCI pi_country: USA pi_phone: 410-338-4544 keywords_1: CALIBRATION,ENGINEERING hours_pri: 29.01 foc: Y time_crit: N pi_position: FOC ENGINEER ! end of coverpage abstract: line_1: This is an FOC engineering program needed line_2: to monitor the FOC/48 image stability after line_3: the introduction of the NEW Hold Mode: line_4: EHT Heater Power has been increased from 14 to line_5: 22 WATT. At the same time the Instrument WARM-up line_6: time was reduced from 3 hours to 3 min. line_7: The effects of the REDUCED Warm-up time on the line_8: image stability of the F/48 detector will be line_9: investigated. ! ! end of abstract general_form_proposers: lname: MIEBACH fname: MANFRED inst: STSCI country: USA ! ! end of general_form_proposers block general_form_text: question: 5 section: 1 line_1: SCHEDULING REQUIREMENTS: In order to meet line_2: the goals of the proposal it is essential that line_3: the very first observation is scheduled line_4: - as close as possible to the HV turn ON line_5: - and that the Instrument has been in the HOLD line_6: for at least 24 Hrs ! !end of general form text general_form_address: lname: MIEBACH fname: MANFRED category: PI inst: STScI addr_1: 3700 San Martin Drive city: Baltimore state: MD zip: 21218 country: USA phone: 410-338-4544 ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 targname: INTFLAT config: FOC/48 opmode: RESEAU aperture: 512X1024 num_exp: 1 time_per_exp: 15M priority: 1 param_1: PIXEL=50X25, param_2: LED=GREEN-2, param_3: LED-STEP=14 req_1: CYCLE 1/ 1-7; req_2: PAR; req_3: SEQ 1-6 NO GAP; comment_1: PLEASE TREAT LINES 1-6 AS A SEQ comment_2: NON-INT. WE WERE UNABLE TO USE THIS comment_3: SPECIAL REQUIREMENT BECAUSE IT comment_4: GENERATES AN ERROR IN PEPSI. ! linenum: 2.000 targname: INTFLAT config: FOC/48 opmode: RESEAU aperture: 512X1024 num_exp: 1 time_per_exp: 15M priority: 1 param_1: PIXEL=50X25, param_2: LED=GREEN-2, param_3: LED-STEP=14 req_1: PAR; ! linenum: 3.000 targname: INTFLAT config: FOC/48 opmode: RESEAU aperture: 512X1024 num_exp: 1 time_per_exp: 15M priority: 1 param_1: PIXEL=50X25, param_2: LED=GREEN-2, param_3: LED-STEP=14 req_1: PAR; ! linenum: 4.000 targname: INTFLAT config: FOC/48 opmode: RESEAU aperture: 512X1024 num_exp: 1 time_per_exp: 15M priority: 1 param_1: PIXEL=50X25, param_2: LED=GREEN-2, param_3: LED-STEP=14 req_1: PAR; ! linenum: 5.000 targname: INTFLAT config: FOC/48 opmode: RESEAU aperture: 512X1024 num_exp: 1 time_per_exp: 15M priority: 1 param_1: PIXEL=50X25, param_2: LED=GREEN-2, param_3: LED-STEP=14 req_1: PAR; ! linenum: 6.000 targname: INTFLAT config: FOC/48 opmode: RESEAU aperture: 512X1024 num_exp: 1 time_per_exp: 15M priority: 1 param_1: PIXEL=50X25, param_2: LED=GREEN-2, param_3: LED-STEP=14 req_1: PAR; ! linenum: 7.000 targname: DARK config: FOC/48 opmode: IMAGE aperture: 512X1024 sp_element: CLEAR num_exp: 1 time_per_exp: 30M priority: 1 param_1: PIXEL=50X25, req_1: PAR; ! ! end of exposure logsheet ! No scan data records found