! File: 3404C.PROP ! Database: PEPDB ! Date: 19-FEB-1994:06:36:09 coverpage: title_1: WFPC FOCUS SWEEP sci_cat: ENG proposal_for: ENG/OTA pi_title: PROF pi_fname: EDWARD pi_mi: J pi_lname: GROTH pi_inst: PRINCETON pi_country: USA pi_phone: 609-258-4361 keywords_1: OPTICAL ALIGNMENT hours_pri: 0.14 num_pri: 1 wf_pc: Y realtime: Y ! end of coverpage abstract: line_1: This proposal requests the use of PC6 with filters line_2: F487N and F889N in order to do a "focus sweep" as line_3: approved by the TTSC. There will be a realtime line_4: "target acquisition exposure" in order to place the line_5: star at the correct location in PC6. Then there will line_6: 7 sets of exposures at different secondary mirror line_7: despaces in order to measure the focus of the telescope. line_8: Prior to each set of exposures, realtime contacts must line_9: be established in order to move the secondary mirror. line_10: Each set of exposures consists of 4 exposures, a short line_11: and a long exposure in F487N and F889N. It is line_12: estimated that each set can be completed in one orbit, line_13: so eight orbits are required for this proposal. All line_14: exposures are to occur in fine lock, be pre-flashed, line_15: and not be cosmic ray split. ! ! end of abstract general_form_proposers: lname: GROTH fname: EDWARD title: PROF mi: J inst: PRINCETON UNIVERSITY country: USA esa: N ! lname: SCHROEDER fname: DANIEL title: PROF mi: J inst: BELOIT COLLEGE country: USA esa: N ! lname: BURROWS fname: CHRIS title: DR inst: STSCI country: USA esa: N ! lname: JEDRZEJEWSKI fname: ROBERT title: DR inst: ESA country: UK esa: Y ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: This proposal requests the use of PC6 with filters line_2: F487N and F889N in order to do a "focus sweep" as line_3: approved by the TTSC. There will be a realtime line_4: "target acquisition exposure" in order to place the line_5: star at the correct location in PC6. Then there will line_6: 7 sets of exposures at different secondary mirror line_7: despaces in order to measure the focus of the telescope. line_8: Prior to each set of exposures, realtime contacts must line_9: be established in order to move the secondary mirror. line_10: Each set of exposures consists of 4 exposures, a short line_11: and a long exposure in F487N and F889N. It is line_12: estimated that each set can be completed in one orbit, line_13: so eight orbits are required for this proposal. All line_14: exposures are to occur in fine lock, be pre-flashed, line_15: and not be cosmic ray split. ! !end of general form text general_form_address: lname: GROTH fname: EDWARD mi: J title: PROF category: PI inst: PRINCETON UNIVERSITY addr_1: PHYSICS DEPARTMENT addr_2: JADWIN HALL city: PRINCETON state: NJ zip: 08544 country: USA phone: 609-258-4361 ! lname: SCHROEDER fname: DANIEL mi: J title: PROF category: CON inst: BELOIT COLLEGE addr_1: PHYSICS DEPARTMENT city: BELOIT state: WI zip: 53511 country: USA phone: 608-365-3391 ! lname: BURROWS fname: CHRIS title: DR category: CON inst: STSCI addr_1: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA phone: 301-338-4913 ! lname: JEDRZEJEWSKI fname: ROBERT title: DR category: CON inst: ESA addr_1: STSCI addr_2: 3700 SAN MARTIN DRIVE city: BALTIMORE state: MD zip: 21218 country: USA phone: 301-338-8524 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: SAO7867 descr_1: STAR pos_1: RA = 13H 40M 40.99S +/- 0.1S, pos_2: DEC=+76D 50' 37.5" +/- 1.0" equinox: 2000.0 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 10.000 sequence_1: DEFINE sequence_2: SWEEP targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M priority: 1 req_1: REQ UPLINK; req_2: SEQ 10,12,16,20,24 NO GAP; req_3: CYCLE 1 / 10-26 comment_1: THIS LINE ALLOWS TIME TO comment_2: MOVE THE SECONDARY MIRROR ! linenum: 12.000 sequence_1: DEFINE sequence_2: SWEEP targname: SAO7867 config: PC opmode: IMAGE aperture: P6 sp_element: F487N num_exp: 1 time_per_exp: 2.6S priority: 1 param_1: PRE-FLASH=YES, param_2: CR-SPLIT=NO, param_3: PURGE=NO req_1: GUID TOL 0.007" comment_1: THIS LINE GETS AN EXPOSURE ! linenum: 14.000 sequence_1: DEFINE sequence_2: SWEEP targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 1S priority: 1 param_1: FORMAT=FN req_1: PAR WITH 12 comment_1: THIS LINE IS TO GET A 32KBPS comment_2: DOWNLINK FOR JITTER DATA ! linenum: 16.000 sequence_1: DEFINE sequence_2: SWEEP targname: SAO7867 config: PC opmode: IMAGE aperture: P6 sp_element: F487N num_exp: 1 time_per_exp: 26S priority: 1 param_1: PRE-FLASH=YES, param_2: CR-SPLIT=NO, param_3: PURGE=NO req_1: GUID TOL 0.007" comment_1: THIS LINE GETS AN EXPOSURE ! linenum: 18.000 sequence_1: DEFINE sequence_2: SWEEP targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 1S priority: 1 param_1: FORMAT=FN req_1: PAR WITH 16 comment_1: THIS LINE IS TO GET A 32KBPS comment_2: DOWNLINK FOR JITTER DATA ! linenum: 20.000 sequence_1: DEFINE sequence_2: SWEEP targname: SAO7867 config: PC opmode: IMAGE aperture: P6 sp_element: F889N num_exp: 1 time_per_exp: 4S priority: 1 param_1: PRE-FLASH=YES, param_2: CR-SPLIT=NO, param_3: PURGE=NO req_1: GUID TOL 0.007" comment_1: THIS LINE GETS AN EXPOSURE ! linenum: 22.000 sequence_1: DEFINE sequence_2: SWEEP targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 1S priority: 1 param_1: FORMAT=FN req_1: PAR WITH 20 comment_1: THIS LINE IS TO GET A 32KBPS comment_2: DOWNLINK FOR JITTER DATA ! linenum: 24.000 sequence_1: DEFINE sequence_2: SWEEP targname: SAO7867 config: PC opmode: IMAGE aperture: P6 sp_element: F889N num_exp: 1 time_per_exp: 40S priority: 1 param_1: PRE-FLASH=YES, param_2: CR-SPLIT=NO, param_3: PURGE=NO req_1: GUID TOL 0.007" comment_1: THIS LINE GETS AN EXPOSURE ! linenum: 26.000 sequence_1: DEFINE sequence_2: SWEEP targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 1S priority: 1 param_1: FORMAT=FN req_1: PAR WITH 24 comment_1: THIS LINE IS TO GET A 32KBPS comment_2: DOWNLINK FOR JITTER DATA ! linenum: 100.000 targname: SAO7867 config: PC opmode: IMAGE aperture: P6 sp_element: F487N num_exp: 1 time_per_exp: 3S priority: 1 param_1: PRE-FLASH=YES, param_2: CR-SPLIT=NO, param_3: PURGE=NO, req_1: INT ACQ FOR 200-300; req_2: POS TARG -12.3,9.5; req_3: GUID TOL 0.007"; req_4: RT ANALYSIS; req_5: CYCLE 1 comment_1: THIS EXPOSURE IS USED TO CENTER THE comment_2: STAR AT PIXEL COORDINATES (245,310) comment_3: IN PC6 WHICH IS ITS OPTICAL AXIS ! linenum: 200.000 sequence_1: USE SWEEP comment_1: PRIOR TO THIS SEQUENCE OF EXPOSURES comment_2: REAL TIME COMMANDS MUST BE USED TO comment_3: MOVE THE SECONDARY MIRROR TO THE comment_4: FIRST DESPACE POSITION ! linenum: 202.000 sequence_1: USE SWEEP comment_1: PRIOR TO THIS SEQUENCE OF EXPOSURES comment_2: REAL TIME COMMANDS MUST BE USED TO comment_3: MOVE THE SECONDARY MIRROR TO THE comment_4: SECOND DESPACE POSITION. ! linenum: 204.000 sequence_1: USE SWEEP comment_1: PRIOR TO THIS SEQUENCE OF EXPOSURES comment_2: REAL TIME COMMANDS MUST BE USED TO comment_3: MOVE THE SECONDARY MIRROR TO THE comment_4: THIRD DESPACE POSITION. ! linenum: 206.000 sequence_1: USE SWEEP comment_1: PRIOR TO THIS SEQUENCE OF EXPOSURES comment_2: REAL TIME COMMANDS MUST BE USED TO comment_3: MOVE THE SECONDARY MIRROR TO THE comment_4: FOURTH DESPACE POSITION. ! linenum: 208.000 sequence_1: USE SWEEP comment_1: PRIOR TO THIS SEQUENCE OF EXPOSURES comment_2: REAL TIME COMMANDS MUST BE USED TO comment_3: MOVE THE SECONDARY MIRROR TO THE comment_4: FIFTH DESPACE POSITION. ! linenum: 210.000 sequence_1: USE SWEEP comment_1: PRIOR TO THIS SEQUENCE OF EXPOSURES comment_2: REAL TIME COMMANDS MUST BE USED TO comment_3: MOVE THE SECONDARY MIRROR TO THE comment_4: SIXTH DESPACE POSITION. ! linenum: 212.000 sequence_1: USE SWEEP comment_1: PRIOR TO THIS SEQUENCE OF EXPOSURES comment_2: REAL TIME COMMANDS MUST BE USED TO comment_3: MOVE THE SECONDARY MIRROR TO THE comment_4: SEVENTH DESPACE POSITION. ! linenum: 300.000 targname: DARK config: S/C opmode: DATA aperture: NONE num_exp: 1 time_per_exp: 20M priority: 1 req_1: REQ UPLINK; req_2: CYCLE 1 comment_1: THIS LINE ALLOWS TIME TO comment_2: MOVE THE SECONDARY MIRROR comment_3: BACK TO ITS NOMINAL POSITION ! ! end of exposure logsheet ! No scan data records found