! File: 3172C.PROP ! Database: PEPDB ! Date: 18-FEB-1994:20:25:11 coverpage: title_1: WF/PC SV OBSERVATION: INTERNAL MONITOR PROPOSAL proposal_for: SV/WFC pi_title: PROF. pi_fname: JAMES pi_mi: A. pi_lname: WESTPHAL pi_inst: CALTECH pi_country: USA pi_phone: 818-356-4900 hours_pri: 4.00 num_pri: 4 ! end of coverpage abstract: line_1: This is a monitor proposal to regularly update the WFPC line_2: standard data base of darks, biases, and preflashes. line_3: It also monitors flat stability in three major filters: line_4: F439W, F555W, and F785LP, using internal flats and checks line_5: for the onset of QEH using F439W. Finally it takes line_6: KSPOTS in both cameras, which provides a measure of line_7: mechanical stability on orbit. The proposal uses only line_8: internal targets and is intended to run on a line_9: non-interference basis. It should be run every four line_10: weeks. ! ! end of abstract general_form_proposers: lname: fname: WF/PC IDT inst: VARIOUS country: USA ! ! end of general_form_proposers block general_form_text: question: 2 section: 1 line_1: SV WF/PC Test. ! question: 3 section: 1 line_1: This test takes various internal exposures in the WF and PC, line_2: including darks, biases, preflashes, internal flats, and line_3: KSPOTS. ! question: 4 section: 1 line_1: Ongoing update of instrument calibration database, plus line_2: monitoring of on-orbit instrument performance, including line_3: photometric (QEH) and mechanical stability . ! question: 5 section: 0 line_1: This program is an addition to SV designed to kick in line_2: when the regularly scheduled calibration programs end, line_3: in late Mar. ! question: 7 section: 1 line_1: These data will be analyzed at the WF/PC data analysis facilities. They will line_2: also be part of the ScI calibration data base and the numbers will be included line_3: in the WF/PC calibration report. ! !end of general form text general_form_address: lname: WESTPHAL fname: JAMES mi: A. category: PI inst: CALTECH ! lname: GROTH fname: EDWARD mi: J. inst: PRINCETON UNIVERSITY addr_1: PHYSICS DEPT., JADWIN HALL city: PRINCETON state: NJ zip: 08544 country: USA phone: (609) 258-4361 ! lname: GUNN fname: JAMES mi: E. category: CON inst: PRINCETON UNIVERSITY addr_1: ASTROPHYSICAL SCIENCE addr_2: PEYTON HALL city: PRINCETON state: NJ zip: 08540 country: USA phone: 609-452-3802 ! lname: BAUM fname: WILLIAM mi: A. category: CON inst: LOWELL OBSERVATORY addr_1: PLANETARY RES. CTR. addr_2: 1400 MARS HILL ROAD city: FLAGSTAFF state: AZ zip: 86001 country: USA phone: 602-774-3358 ! lname: FABER fname: SANDRA category: CON inst: U.C. SANTA CRUZ addr_1: LICK OBSERVATORY addr_2: NATURAL SCIENCE II, BLDG. 160 city: SANTA CRUZ state: CA zip: 95060 country: USA phone: 408-429-2944 ! lname: DANIELSON fname: G. EDWARD category: CON inst: CALTECH addr_1: M/S 170-25 addr_2: DIVISION OF GEOLOGICAL & PLANETARY SCIENCES city: PASADENA state: CA zip: 91125 country: USA phone: 818-356-6861 ! ! end of general_form_address records ! No fixed target records found ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 1.000 sequence_1: DEFINE sequence_2: INTERN targname: BIAS config: WFC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 0S priority: 1 param_1: PRE-FLASH=NO req_1: GROUP 1-42 WITHIN 7D; comment_1: EXPOSURE ORDER NOT IMPORTANT EXCPT comment_2: 4-7 AND 24-27 ARE UNITS AND THE comment_3: KSPOTS (41-42) COME LAST (TO AVOID comment_4: RESID. IMAGE). ! linenum: 2.000 sequence_1: DEFINE sequence_2: INTERN targname: BIAS config: WFC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 0S priority: 1 param_1: PRE-FLASH=YES comment_1: PREFLASH EXPOSURE. ! linenum: 3.000 sequence_1: DEFINE sequence_2: INTERN targname: BIAS config: WFC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 0S priority: 1 param_1: PRE-FLASH=YES comment_1: PREFLASH EXPOSURE. ! linenum: 4.000 sequence_1: DEFINE sequence_2: INTERN targname: INTFLAT config: WFC opmode: IMAGE aperture: ALL sp_element: F439W num_exp: 1 time_per_exp: 100S priority: 1 param_1: PRE-FLASH=NO, param_2: CR-SPLIT=NO req_1: SEQ 4-7 NON-INT; comment_2: THIS 100S EXP USES 2EA 40S comment_3: AND 1EA 20S LAMP OPER'S. comment_4: TO MEASURE QEH. DO NOT ALTER. ! linenum: 5.000 sequence_1: DEFINE sequence_2: INTERN targname: INTFLAT config: WFC opmode: IMAGE aperture: ALL sp_element: F439W num_exp: 1 time_per_exp: 100S priority: 1 param_1: PRE-FLASH=NO, param_2: CR-SPLIT=NO, comment_1: START comment_2: IMMED. AFTER PRECED. EXP. ! linenum: 6.000 sequence_1: DEFINE sequence_2: INTERN targname: DARK config: WFC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 1500S priority: 1 param_1: PRE-FLASH=YES, param_2: CR-SPLIT=NO, param_3: CLOCKS=NO, comment_1: WITH SERIALS OFF. START comment_2: IMMED. AFTER PRECED. EXP. comment_3: THIS IS PREFLASHED. ! linenum: 7.000 sequence_1: DEFINE sequence_2: INTERN targname: INTFLAT config: WFC opmode: IMAGE aperture: ALL sp_element: F439W num_exp: 1 time_per_exp: 100S priority: 1 param_1: PRE-FLASH=NO, param_2: CR-SPLIT=NO comment_1: START comment_2: IMMED. AFTER PRECED. EXP. ! linenum: 8.000 sequence_1: DEFINE sequence_2: INTERN targname: INTFLAT config: WFC opmode: IMAGE aperture: ALL sp_element: F555W num_exp: 1 time_per_exp: 7S priority: 1 param_1: PRE-FLASH=NO, param_2: CR-SPLIT=NO ! linenum: 9.000 sequence_1: DEFINE sequence_2: INTERN targname: INTFLAT config: WFC opmode: IMAGE aperture: ALL sp_element: F785LP num_exp: 1 time_per_exp: 0.14S priority: 1 param_1: PRE-FLASH=NO, param_2: CR-SPLIT=NO ! linenum: 9.500 sequence_1: DEFINE sequence_2: INTERN targname: BIAS config: WFC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 0S priority: 1 param_1: PRE-FLASH=NO, PURGE=NO, req_1: SEQ 9.5-10 NON-INT; comment_1: NOT WITHIN 3 HOURS AFTER K-SPOT TEST. ! linenum: 10.000 sequence_1: DEFINE sequence_2: INTERN targname: DARK config: WFC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 1500S priority: 1 param_1: PRE-FLASH=YES, param_2: CR-SPLIT=NO, param_3: CLOCKS=NO, comment_1: WITH SERIALS OFF. THIS IS comment_2: PREFLASHED. ! linenum: 21.000 sequence_1: DEFINE sequence_2: INTERN targname: BIAS config: PC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 0S priority: 1 param_1: PRE-FLASH=NO comment_1: START PARALLEL SEQUENCE comment_2: FOR THE PC. ! linenum: 22.000 sequence_1: DEFINE sequence_2: INTERN targname: BIAS config: PC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 0S priority: 1 param_1: PRE-FLASH=YES comment_1: PREFLASH EXPOSURE. ! linenum: 23.000 sequence_1: DEFINE sequence_2: INTERN targname: BIAS config: PC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 0S priority: 1 param_1: PRE-FLASH=YES comment_1: PREFLASH EXPOSURE. ! linenum: 24.000 sequence_1: DEFINE sequence_2: INTERN targname: INTFLAT config: PC opmode: IMAGE aperture: ALL sp_element: F439W num_exp: 1 time_per_exp: 360S priority: 1 param_1: PRE-FLASH=NO, param_2: CR-SPLIT=NO req_1: SEQ 24-27 NON-INT; comment_2: THIS 360S EXP USES 9EA 40S comment_3: LAMP OPER'S. LINES 24-27 TIMED comment_4: TO MEASURE QEH. DO NOT ALTER. ! linenum: 25.000 sequence_1: DEFINE sequence_2: INTERN targname: INTFLAT config: PC opmode: IMAGE aperture: ALL sp_element: F439W num_exp: 1 time_per_exp: 360S priority: 1 param_1: PRE-FLASH=NO, param_2: CR-SPLIT=NO comment_1: START comment_2: IMMED. AFTER PRECED. EXP. ! linenum: 26.000 sequence_1: DEFINE sequence_2: INTERN targname: DARK config: PC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 1500S priority: 1 param_1: PRE-FLASH=YES, param_2: CR-SPLIT=NO, param_3: CLOCKS=NO, comment_1: WITH SERIALS OFF. START comment_2: IMMED. AFTER PRECED. EXP. comment_3: THIS IS PREFLASHED. ! linenum: 27.000 sequence_1: DEFINE sequence_2: INTERN targname: INTFLAT config: PC opmode: IMAGE aperture: ALL sp_element: F439W num_exp: 1 time_per_exp: 360S priority: 1 param_1: PRE-FLASH=NO, param_2: CR-SPLIT=NO comment_1: START comment_2: IMMED. AFTER PRECED. EXP. ! linenum: 28.000 sequence_1: DEFINE sequence_2: INTERN targname: INTFLAT config: PC opmode: IMAGE aperture: ALL sp_element: F555W num_exp: 1 time_per_exp: 23S priority: 1 param_1: PRE-FLASH=NO, param_2: CR-SPLIT=NO ! linenum: 29.000 sequence_1: DEFINE sequence_2: INTERN targname: INTFLAT config: PC opmode: IMAGE aperture: ALL sp_element: F785LP num_exp: 1 time_per_exp: 0.5S priority: 1 param_1: PRE-FLASH=NO, param_2: CR-SPLIT=NO ! linenum: 29.500 sequence_1: DEFINE sequence_2: INTERN targname: BIAS config: PC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 0S priority: 1 param_1: PRE-FLASH=NO, param_2: PURGE=NO, req_1: SEQ 29.5-30 NON-INT comment_1: NOT WITHIN 3 HOURS AFTER K-SPOT TEST. ! linenum: 30.000 sequence_1: DEFINE sequence_2: INTERN targname: DARK config: PC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 1500S priority: 1 param_1: PRE-FLASH=YES, param_2: CR-SPLIT=NO, param_3: CLOCKS=NO, comment_1: WITH SERIALS OFF. THIS comment_2: IS PREFLASHED. DO NOT PLACE comment_3: AFTER A BRIGHT PC OVEREXPOSURE. ! linenum: 41.000 sequence_1: DEFINE sequence_2: INTERN targname: KSPOTS config: PC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 0.5S priority: 1 param_1: PRE-FLASH=NO, param_2: PURGE=YES comment_1: WITH LINE 42, PLACE AFTER comment_2: ALL PRECEDING LINES. ! linenum: 42.000 sequence_1: DEFINE sequence_2: INTERN targname: KSPOTS config: WFC opmode: IMAGE aperture: ALL sp_element: NONE num_exp: 1 time_per_exp: 0.3S priority: 1 param_1: PRE-FLASH=NO, param_2: PURGE=YES comment_1: WITH LINE 41, PLACE AFTER comment_2: ALL PRECEDING LINES. ! linenum: 100.000 sequence_1: USE sequence_2: INTERN req_1: CYCLE 0/100-129; comment_1: RUN INTERNAL MONITOR ONCE EVERY comment_2: FOUR WEEKS ON A NON-INTERFERENCE comment_3: BASIS. ! linenum: 101.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 102.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 103.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 104.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 105.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 106.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 107.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 108.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 109.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 110.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 111.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 112.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 113.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 114.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 115.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 116.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 117.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 118.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 119.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 120.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 121.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 122.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 123.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 124.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 125.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 126.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 127.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 128.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! linenum: 129.000 sequence_1: USE sequence_2: INTERN time_per_exp: X1 ! ! end of exposure logsheet ! No scan data records found