! File: 3145C.PROP ! Database: PEPDB ! Date: 18-FEB-1994:19:13:25 coverpage: title_1: HRS INTERMEDIATE RESOLUTION CALIBRATION, STABILITY, title_2: AND DIGICON 1 LINEARITY CALIBRATION - REVISED sci_cat: CALIBRATION proposal_for: SV/HRS pi_fname: BLAIR pi_mi: D. pi_lname: SAVAGE pi_inst: UNIV. OF WISCONSIN pi_country: USA pi_phone: 608-262-4900 hours_pri: 6.60 num_pri: 1 hrs: Y ! end of coverpage abstract: line_1: This proposal defines a test to evaluate the HRS intermediate line_2: resolution and wavelength calibration and their stability. line_3: Measurements in the large and small aperture will be evaluated. ! ! end of abstract general_form_proposers: lname: MARAN fname: S. mi: P. inst: GFSC/NASA country: USA ! lname: BRANDT fname: J. mi: C. inst: GFSC/NASA country: USA ! lname: SAVAGE fname: BLAIR mi: D. inst: UNIV. OF WISCONSIN country: USA ! lname: LINSKY fname: J. mi: L. inst: JILA/UNIV. OF COLORADO country: USA ! lname: CARPENTER fname: K. mi: G. inst: LASP/NASA-GSFC country: USA ! lname: EBBETS fname: DENNIS mi: C. inst: BALL AEROSPACE SYSTEMS DIV. country: USA ! ! end of general_form_proposers block general_form_text: question: 3 section: 1 line_1: Description of proposed observations: line_2: Observe Mu col (HD38666) as follows: line_3: 1. Acquire target using on-board acquisition. line_4: 2. Center in LSA and make focus diode aperture map. line_5: 3. Obtain G140L spectra as follows: line_6: 8 carrousel settings on 100 A centers (1100,1200,...1800A), line_7: 2 substeps/diode, integrations <=5 s/substep line_9: 4. Obtain G140M spectra as follows: line_10: 42 carrousel settings on 15 A centers (1090, 1105, 1120,...1705A) line_11: 2 substeps/diode, integrations <=5 s/substep Lambda>1200 and line_12: <=15 s/substep for Lambda<1200. line_13: 10 percent integration time on background. line_14: 5. Switch to detector 2. Scan nominal wave. ranges+extrema point line_15: 6. Repeat step 4 for G160M except use 39 carrousel settings on line_16: 20 A centers (1160,1180,...1900; 2160A). line_17: 7. Repeat step 4 for G200M except use 38 carrousel settings on line_18: 20 A centers (1600; 1780,1800,...2500; 2600A) line_19: 8. Repeat step 4 for G270M except use 46 carrousel settings on line_20: 25 A centers (1900; 2300,2325,...3400A). line_21: 9. Make ST SAM followed by target acquisition peak up to center line_22: target in small aperture. line_23: 10.Spectral data acquisition with G270M of object and ! question: 3 section: 2 line_1: SC1 calibration lamp as follows: line_2: a. 16 carrousel settings on 100 A centers (1900,2000,...3400A). line_3: b. 2 substeps/diode 5 s/substep line_4: c. ~10 percent of integration time on background. line_5: 11.Repeat 10 for G200M at 11 carrousel settings on 100 A centers line_6: (1600,1700,...2600A). line_7: 12.Repeat 10 for G160M at 10 carrousel setting on 100 A centers line_8: (1200, 1300,....2100A). line_9: 13.Switch to detector 1. line_10: 14.Repeat 10 for G140M at 8 carrousel settings on 75 A centers line_11: (1150, 1225, 1300,....1675A). line_12: On the repeat visit, repeat steps 10 to 14 and obtain large line_13: aperture spectra of the object at the set up wavelengths line_14: listed in steps 10 to 14. ! question: 5 section: 1 line_1: First measurements should be obtained after successful completion line_2: of tests HRS1354 and HRS1355. The repeat should occur at least line_3: 30 days after the first visit. line_5: SV MINIMUM PLAN: ALL line_6: SV DELTA PLAN: NONE line_7: GUIDING TOLERANCE: 0.025 arcsec ! question: 5 section: 2 line_1: line_2: (The following comment moved from exposure logsheet line 15): line_4: Observations of (exposure logsheet) lines 15-20 are to be obtained on the line_5: revisit to MU-COL, more than 30 days after lines 1-14.02. line_8: The HRS is operated outside of nominal wavelength range. ! question: 7 section: 1 line_1: Data will be reduced at GSFC, BASD, or the Univ. of Wisconsin. line_2: The data will be used to obtain the following: line_3: 1. absolute and relative sensitivity for the G140M, G160M, line_4: G200M, G270M modes line_5: 2. small aperture light loss for each intermediate resolution mode line_6: 3. wavelength calibration for each intermediate resolution mode line_7: 4. stability of the photometric and wavelength calibration line_8: 5. Digicon 1 non-linearity information. ! !end of general form text general_form_address: lname: SAVAGE fname: BLAIR mi: D. category: PI inst: UNIV. OF WISCONSIN ! lname: MARAN fname: STEPHEN category: CON inst: NASA/GSFC addr_1: CODE 680 city: GREENBELT state: MD zip: 20771 country: USA phone: 301-344-8607 ! lname: SAVAGE fname: BLAIR category: PI inst: UNIV OF WISCONSIN addr_1: DEPT. OF ASTRONOMY city: MADISON state: WI zip: 53706 country: USA ! lname: CARPENTER fname: KENNETH category: CON inst: LASP/NASA-GSFC addr_1: CODE 681 city: GREENBELT state: MD zip: 20771 country: USA phone: 301-286-3453 ! lname: EBBETS fname: DENNIS mi: C category: CON inst: BALL AEROSPACE SYS. DIV. addr_1: P.O. BOX 1062 city: BOULDER state: CO zip: 803061062 country: USA phone: 303-939-5964 ! ! end of general_form_address records fixed_targets: targnum: 1 name_1: MU-COL name_2: HD38666 descr_1: PHOTOMETRIC STANDARD pos_1: RA=5H 45M 59.92S +/-0.01S, pos_2: DEC=-32D 18' 22.8" +/-0.16", pos_3: PLATE-ID=01WB equinox: 2000 pm_or_par: Y pos_epoch_yr: 1950.00 ra_pm_val: 0.000267 ra_pm_unct: 0.000267 dec_pm_val: -0.0250 dec_pm_unct: 0.0030 fluxnum_1: 1 fluxval_1: V=5.17,TYPE=O9.5V fluxnum_2: 2 fluxval_2: B-V=-0.28 ! ! end of fixed targets ! No solar system records found ! No generic target records found exposure_logsheet: linenum: 0.200 sequence_1: DEF HRS10 targname: MU-COL config: HRS opmode: ACCUM aperture: 0.25 sp_element: # wavelength: 1000 num_exp: 1 time_per_exp: 28.8S fluxnum_1: 1 priority: 1 param_1: METER=YES, param_2: METER-WAVE=DEF, param_3: METER-WIDTH=64, param_4: LOW-RATE=0.0, param_5: HIGH-COUNT=60000, param_6: STEP-PATT=4 req_1: SEQ 0.2 - 0.3 NON-INT; comment_1: 30000 CTS/SUBSTEP OR MAX OF comment_2: 10 S/SUBSTEP. MAXIMUM = 8 COMPLETE comment_3: PATTERNS. ! linenum: 0.300 sequence_1: DEF HRS10 targname: WAVE config: HRS opmode: ACCUM aperture: SC1 sp_element: # wavelength: 1000 num_exp: 1 time_per_exp: 20S fluxnum_1: 1 priority: 1 param_1: STEP-PATT=2 req_1: CALIB FOR 0.2 ! linenum: 6.050 targname: MU-COL config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 57.8S fluxnum_1: 1 priority: 1 param_1: MAP=END-POINT, param_2: BRIGHT=25000, param_3: FAINT=150, param_4: SEARCH-SIZE=5, req_1: ONBOARD ACQ FOR 6.1; req_2: SEQ 6.05-6.3 NO GAP; req_3: CYCLE 0/ 6.05-29; ! linenum: 6.100 targname: MU-COL config: HRS opmode: ACQ/PEAKUP aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 46S fluxnum_1: 1 priority: 1 req_1: ONBOARD ACQ FOR 6.2-12.1; req_2: REPEAT 6.05- 14.02 EVERY 35D +/- req_3: 5 D FOR 1 MORE TIME; comment_1: SCHEDULE FIRST VISIT EARLY IN comment_2: SV. SCHEDULE REVISIT AS SOON AS comment_3: POSSIBLE AFTER 30 DAYS. ! linenum: 6.200 targname: MU-COL config: HRS opmode: IMAGE aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 96.8S fluxnum_1: 1 priority: 1 ! linenum: 6.300 targname: MU-COL config: HRS opmode: IMAGE aperture: 0.25 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 96.8S fluxnum_1: 1 priority: 1 ! linenum: 7.015 targname: MU-COL config: HRS opmode: IMAGE aperture: 0.25 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 96.8S priority: 1 req_1: SEQ 7.015-8.07 NO GAP; ! linenum: 7.020 sequence_1: USE HRS10 sp_element: G270M wavelength: X 1.95 ! linenum: 7.030 sequence_1: ^ sp_element: ^ wavelength: X 2.0 ! linenum: 7.040 sequence_1: USE HRS10 sp_element: G270M wavelength: X 2.1 ! linenum: 7.050 sequence_1: ^ sp_element: ^ wavelength: X 2.2 ! linenum: 7.060 sequence_1: ^ sp_element: ^ wavelength: X 2.3 ! linenum: 7.070 sequence_1: USE HRS10 sp_element: G270M wavelength: X 2.4 ! linenum: 7.080 sequence_1: ^ sp_element: ^ wavelength: X 2.5 ! linenum: 7.090 sequence_1: ^ sp_element: ^ wavelength: X 2.6 ! linenum: 8.000 sequence_1: USE HRS10 sp_element: G270M wavelength: X 2.7 ! linenum: 8.010 sequence_1: ^ sp_element: ^ wavelength: X 2.8 ! linenum: 8.020 sequence_1: USE HRS10 sp_element: G270M wavelength: X 2.9 ! linenum: 8.030 sequence_1: ^ sp_element: ^ wavelength: X 3.0 ! linenum: 8.040 sequence_1: USE HRS10 sp_element: G270M wavelength: X 3.1 ! linenum: 8.050 sequence_1: ^ sp_element: ^ wavelength: X 3.2 ! linenum: 8.060 sequence_1: ^ sp_element: ^ wavelength: X 3.3 ! linenum: 8.070 sequence_1: USE HRS10 sp_element: G270M wavelength: X 3.4 ! linenum: 8.080 targname: MU-COL config: HRS opmode: IMAGE aperture: 0.25 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 96.8S priority: 1 ! linenum: 9.000 sequence_1: USE HRS10 sp_element: G200M wavelength: X 1.6 req_1: SEQ 8.08-10.04 NO GAP; ! linenum: 9.010 sequence_1: USE HRS10 sp_element: G200M wavelength: X 1.7 ! linenum: 9.020 sequence_1: ^ sp_element: ^ wavelength: X 1.8 ! linenum: 9.030 sequence_1: ^ sp_element: ^ wavelength: X 1.9 ! linenum: 9.040 sequence_1: USE HRS10 sp_element: G200M wavelength: X 2.0 ! linenum: 9.050 sequence_1: USE HRS10 sp_element: G200M wavelength: X 2.1 ! linenum: 10.000 sequence_1: ^ sp_element: ^ wavelength: X 2.2 ! linenum: 10.010 sequence_1: ^ sp_element: ^ wavelength: X 2.3 ! linenum: 10.020 sequence_1: USE HRS10 sp_element: G200M wavelength: X 2.4 ! linenum: 10.030 sequence_1: ^ sp_element: ^ wavelength: X 2.5 ! linenum: 10.040 sequence_1: ^ sp_element: ^ wavelength: X 2.6 ! linenum: 10.050 targname: MU-COL config: HRS opmode: IMAGE aperture: 0.25 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 96.8S priority: 1 ! linenum: 11.000 sequence_1: USE HRS10 sp_element: G160M wavelength: X 1.2 req_1: SEQ 10.05-12.04 NO GAP; ! linenum: 11.010 sequence_1: ^ sp_element: ^ wavelength: X 1.3 ! linenum: 11.020 sequence_1: ^ sp_element: ^ wavelength: X 1.4 ! linenum: 11.030 sequence_1: USE HRS10 sp_element: G160M wavelength: X 1.5 ! linenum: 11.040 sequence_1: ^ sp_element: ^ wavelength: X 1.6 ! linenum: 12.000 sequence_1: ^ sp_element: ^ wavelength: X 1.7 ! linenum: 12.010 sequence_1: USE HRS10 sp_element: G160M wavelength: X 1.8 ! linenum: 12.020 sequence_1: ^ sp_element: ^ wavelength: X 1.9 ! linenum: 12.030 sequence_1: ^ sp_element: ^ wavelength: X 2.0 ! linenum: 12.040 sequence_1: USE HRS10 sp_element: G160M wavelength: X 2.1 ! linenum: 12.100 targname: MU-COL config: HRS opmode: ACQ/PEAKUP aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 46S priority: 1 req_1: ONBOARD ACQ FOR 12.2-14.02 ! linenum: 12.200 targname: MU-COL config: HRS opmode: IMAGE aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 96.8S priority: 1 ! linenum: 12.300 targname: MU-COL config: HRS opmode: IMAGE aperture: 0.25 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 96.8S priority: 1 ! linenum: 13.000 sequence_1: USE HRS10 sp_element: G140M wavelength: X 1.15 req_1: SEQ 12.1-14.02 NO GAP; ! linenum: 13.010 sequence_1: ^ sp_element: ^ wavelength: X 1.225 ! linenum: 13.020 sequence_1: ^ sp_element: ^ wavelength: X 1.3 ! linenum: 13.030 sequence_1: USE HRS10 sp_element: G140M wavelength: X 1.375 ! linenum: 13.040 sequence_1: ^ sp_element: ^ wavelength: X 1.45 ! linenum: 14.000 sequence_1: USE HRS10 sp_element: G140M wavelength: X 1.525 ! linenum: 14.010 sequence_1: ^ sp_element: ^ wavelength: X 1.6 ! linenum: 14.020 sequence_1: ^ sp_element: ^ wavelength: X 1.675 ! linenum: 15.000 sequence_1: DEF SEQ targname: MU-COL config: HRS opmode: ACQ aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 57.8S priority: 1 param_1: MAP=END-POINT, param_2: SEARCH-SIZE=5, param_3: BRIGHT=25000, param_4: FAINT=150 req_1: ONBOARD ACQ FOR 15.2 comment_1: STEP-TIME=0.2 ! linenum: 15.200 sequence_1: DEF SEQ targname: MU-COL config: HRS opmode: ACQ/PEAKUP aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 46S priority: 1 req_1: ONBOARD ACQ FOR 15.4-20; ! linenum: 15.400 sequence_1: DEF SEQ targname: MU-COL config: HRS opmode: IMAGE aperture: 2.0 sp_element: MIRROR-A1 num_exp: 1 time_per_exp: 96.8S priority: 1 ! linenum: 16.000 sequence_1: ^ targname: ^ config: HRS opmode: WSCAN aperture: 2.0 sp_element: G140L wavelength: 1050-1850 num_exp: 1 time_per_exp: 16S priority: 1 param_1: METER=YES, param_2: METER-WAVE=DEF, param_3: METER-WIDTH=64, param_4: LOW-RATE=0.0, param_5: STEP-PATT=2, param_6: WAVE-STEP=100, param_7: HIGH-COUNT=480000 comment_1: 30000 CTS/SUBSTEP OR MAX OF comment_2: 1.0 S/SUBSTEP. 8 CARROUSEL POSITIONS, comment_3: 8 COMPLETE PATTERNS. ! linenum: 17.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G140M wavelength: 1112.5-1712.5 num_exp: 1 time_per_exp: 230.4S priority: 1 param_1: METER=YES, param_2: METER-WAVE=DEF, param_3: METER-WIDTH=64, param_4: LOW-RATE=0.0, param_5: STEP-PATT=4, param_6: WAVE-STEP=75, param_7: HIGH-COUNT=480000 comment_1: 30000 CTS/SUBSTEP OR MAX OF comment_2: 12.8 S/SUBSTEP. 8 CARROUSEL comment_3: POSITIONS, 8 COMPLETE PATTERNS. ! linenum: 17.500 sequence_1: DEF SEQ targname: MU-COL config: HRS opmode: IMAGE aperture: 2.0 sp_element: MIRROR-A2 num_exp: 1 time_per_exp: 96.8S priority: 1 ! linenum: 18.000 sequence_1: DEF SEQ targname: MU-COL config: HRS opmode: WSCAN aperture: 2.0 sp_element: G160M wavelength: 1150-2150 num_exp: 1 time_per_exp: 288.0S priority: 1 param_1: METER=YES, param_2: METER-WAVE=DEF, param_3: METER-WIDTH=64, param_4: LOW-RATE=0.0, param_5: STEP-PATT=4, param_6: WAVE-STEP=100, param_7: HIGH-COUNT=600000 comment_1: SWITCH TO DETECTOR 1. comment_2: 30000 CTS/SUBSTEP OR MAX OF comment_3: 12.8 S/SUBSTEP. 10 CARROUSEL comment_4: POSITIONS, 8 COMPLETE PATTERNS. ! linenum: 19.000 sequence_1: ^ targname: ^ config: ^ opmode: ^ aperture: ^ sp_element: G200M wavelength: 1550-2650 num_exp: 1 time_per_exp: 316.8S priority: 1 param_1: METER=YES, param_2: METER-WAVE=DEF, param_3: METER-WIDTH=64, param_4: LOW-RATE=0.0, param_5: STEP-PATT=4, param_6: WAVE-STEP=100, param_7: HIGH-COUNT=660000 comment_1: 30000 CTS/SUBSTEP OR MAX OF comment_2: 12.8 S/SUBSTEP. 11 CARROUSEL comment_3: POSITIONS, 8 COMPLETE PATTERNS. ! linenum: 20.000 sequence_1: DEF SEQ targname: MU-COL config: HRS opmode: WSCAN aperture: 2.0 sp_element: G270M wavelength: 1900-3400 num_exp: 1 time_per_exp: 460.8S priority: 1 param_1: WAVE-STEP=100,METER=YES, param_2: METER-WAVE=DEF, param_3: METER-WIDTH=64, param_4: LOW-RATE=0.0, param_5: STEP-PATT=4, param_6: HIGH-COUNT=960000 comment_1: 30000 CTS/SUBSTEP OR MAX OF comment_2: 12.8 S/SUBSTEP. 16 CARROUSEL comment_3: POSITIONS, 8 COMPLETE PATTERNS. LINES comment_4: 15-20 TO BE DONE DURING SECOND VISIT comment_5: TO TARGET FOR RADIOMETRIC STABILITY comment_6: CHECK. ! linenum: 29.000 sequence_1: USE SEQ ! ! end of exposure logsheet ! No scan data records found