! File: 3122C.PROP
! Database: PEPDB
! Date: 18-FEB-1994:18:13:32
coverpage:
title_1: APERTURE LOCATIONS - PHASE IV A FINE POSITIONS - RE-REVISED
proposal_for: SV/FOS
pi_fname: RICHARD
pi_lname: HARMS
pi_inst: APPLIED RESEARCH CORPORATION
pi_country: USA
num_pri: 1
wf_pc: X
fos: X
realtime: Y
! end of coverpage
abstract:
line_1: The goal is to measure the aperture locations and sizes in 4
line_2: phases as described in detail in "Aperture Locations and
line_3: Sizes for the Space Telescope Science Instruments" by
line_4: O. Lupie, R. Bohlin, and A. Holm.
line_6: This program has the highest priority. Phases I to IIIb must
line_7: be completed before attempting observations of any other
line_8: stellar targets.
line_10: PHASE IVa, in SV, are repeats of Phase IIIb (OV) to verify
line_11: repeatability and gather statistics on the locations.
!
! end of abstract
general_form_proposers:
lname: HARMS
fname: RICHARD
inst: ARC
country: USA
!
lname: ANGEL
fname: ROGER
inst: UNIVERSITY OF ARIZONA
country: USA
!
lname: MARGON
fname: BRUCE
inst: UNIVERSITY OF WASHINGTON
country: USA
!
lname: BARTKO
fname: FRANK
inst: MARTIN MARIETTA CORPORAITON
country: USA
!
lname: DAVIDSEN
fname: ARTHUR
inst: JOHNS HOPKINS UNIVERSITY
country: USA
!
lname: BOHLIN
fname: RALPH
inst: SPACE TELESCOPE SCIENCE INSTITUTE
country: USA
!
lname: FORD
fname: HOLLAND
inst: SPACE TELESCOPE SCIENCE INSTITUTE
country: USA
!
lname: BEAVER
fname: EDWARD
inst: UNIVERSITY OF CALIFORNIA, SAN DIEGO
country: USA
!
lname: BURBIDGE
fname: MARGARET
inst: UNIVERSITY OF CALIFORNIA, SAN DIEGO
country: USA
!
! end of general_form_proposers block
general_form_text:
question: 2
section: 1
line_1: See Abstract.
!
question: 3
section: 1
line_1: Phase IIIb/IVa of Aperture Locations will provide a fine
line_2: measure of the FOS aperture locations in V2V3 by rastering
line_3: a star on a fine grid to find the maximum throughput for
line_4: small apertures. This technique provides the most precise
line_5: V2V3 locations and may provide the most precise locations of
line_6: the larger apertures from the relative positions of Phase I.
line_7: A refined plate scale and orientation can be derived from the
line_8: V2V3 separation of the upper and lower 0.5 arcsec apertures.
line_10: The grid for the 0.5 arcsec apertures is 0.5x0.5 arcsec with
line_11: 0.05 arcsec steps.
line_14: Each detector side should begin and end with flat field
line_15: aperture maps to determine the current detector coordinates
line_16: of the apertures used. A WF/PC image of the stellar field
line_17: should be obtained in parallel with FOS observations of the
line_18: star for boresight testing.
!
question: 5
section: 1
line_1: Mode I real-time data will be used to monitor the start of
line_2: the stellar observations. Onboard software will be used
line_3: for subsequent target acquisitions.
line_7: Start spatial scans in center of aperture. Do not offset s/c
line_8: to center scan on aperture. Perform spatial scans in
line_9: digicon (X,Y) coordinates.
line_11: Record FGS encoder values during the spatial scans.
line_13: The dwell times on the spatial scan form are determined as
line_14: follows:
line_16: ....SI overhead
line_17: .........dump UDL log 30 seconds
line_18: .........issue BEG ACQ/END ACQ 15 seconds
line_19: ....Exposure time 4 seconds
line_20: ....Slew time 10 seconds
!
question: 5
section: 2
line_1: OV/SV Prerequisitites:
line_2: Aperture Calibration Phase IIIb (Prop 1444) performed at
line_3: least 14 days prior to this test.
line_7: Minimum Plan/Delta Plan:
line_8: All observations are minimum plan.
line_10: Pointing stability of 10% of the smallest aperture used
line_11: (0.5") - 0.05" - is required.
line_13: For the TALED observations, a constant absolute Y-base is
line_14: required, and is Y(4.3") - 600.85 Y units. The value of
line_15: Y(4.3") will be determined in OV proposals 2188 and 1441,
line_16: which, due to scheduling requirements external to this
line_17: proposal, should occur at least 18 days prior to the
line_18: observations in the present proposal.
!
question: 7
section: 1
line_1: Data reduction will be performed at the ST ScI, using FOS
line_2: IDT computer hardware. The results of this aperture location
line_3: calibration are relevant to the project data base, so that
line_4: the priority is very high. Data from Phases I-IIIb must be
line_5: reduced before any other observations using stellar targets
line_6: can be attempted.
!
!end of general form text
general_form_address:
lname: HARMS
fname: RICHARD
category: PI
inst: APPLIED RESEARCH CORPORATION
!
! end of general_form_address records
fixed_targets:
targnum: 1
name_1: NGC-188-031
name_2: GSC4619-2765
descr_1: STAR IN NGC 188
pos_1: RA=00H 40M 03.20S +/- 0.01S,
pos_2: DEC=+84D 55' 25.61" +/- 0.02"
equinox: 1950
pm_or_par: Y
pos_epoch_yr: 1950.00
ra_pm_val: -0.000247
ra_pm_unct: 0.000027
dec_pm_val: -0.0088
dec_pm_unct: 0.0005
comment_1: THE GSSS NAME IS GIVEN.
fluxnum_1: 1
fluxval_1: V=15.08
fluxnum_2: 2
fluxval_2: B=15.72
!
! end of fixed targets
! No solar system records found
! No generic target records found
exposure_logsheet:
linenum: 1.000
sequence_1: DEFINE
sequence_2: BLUEA
targname: TALED
config: FOS/BL
opmode: IMAGE
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: COMB=YES,
req_1: SEQ 1-56 NO GAP;
!
linenum: 2.000
sequence_1: ^
targname: ^
config: ^
opmode: ^
aperture: 0.5-PAIR-B
sp_element: ^
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: Y-OFFSET=253,
param_5: COMB=YES,
!
linenum: 9.000
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: SEQ 9-10.1 NON-INT;
req_2: RT ANALYSIS;
!
linenum: 10.000
sequence_1: ^
targname: NGC-188-031
config: FOS/BL
opmode: ACQ
aperture: 4.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 40S
fluxnum_1: 1
priority: 1
req_1: INT ACQ FOR 10.5-17;
!
linenum: 10.100
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: RT ANALYSIS;
!
linenum: 10.500
sequence_1: ^
targname: NGC-188-031
config: ^
opmode: ^
aperture: 4.3
sp_element: ^
num_exp: 1
time_per_exp: 40S
fluxnum_1: 1
priority: 1
comment_1: CONFIRMATION IMAGE.
!
linenum: 11.000
sequence_1: ^
targname: NGC-188-031
config: ^
opmode: ACCUM
aperture: 0.5-PAIR-A
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
!
linenum: 13.000
sequence_1: ^
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5-PAIR-A
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 15.000
sequence_1: DEFINE
sequence_2: BLUEA
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5-PAIR-A
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 17.000
sequence_1: DEFINE
sequence_2: BLUEA
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5-PAIR-A
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN. THE PRECEDING IS A
comment_3: S&D SEQUENCE TO LOCATE THE
comment_4: 0.5-UPPER APERTURE, USING
comment_5: 0.05" PER STEP.
!
linenum: 24.000
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: SEQ 24-25.1 NON-INT;
req_2: RT ANALYSIS;
!
linenum: 25.000
sequence_1: ^
targname: NGC-188-031
config: FOS/BL
opmode: ACQ
aperture: 4.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 40S
fluxnum_1: 1
priority: 1
req_1: INT ACQ FOR 25.5-32;
!
linenum: 25.100
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: RT ANALYSIS;
!
linenum: 25.500
sequence_1: ^
targname: NGC-188-031
config: ^
opmode: ^
aperture: 4.3
sp_element: ^
num_exp: 1
time_per_exp: 40S
fluxnum_1: 1
priority: 1
comment_1: CONFIRMATION IMAGE.
!
linenum: 26.000
sequence_1: ^
targname: NGC-188-031
config: ^
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
!
linenum: 28.000
sequence_1: ^
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 30.000
sequence_1: DEFINE
sequence_2: BLUEA
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 32.000
sequence_1: DEFINE
sequence_2: BLUEA
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN. THE PRECEDING IS A
comment_3: S&D SEQUENCE TO LOCATE THE
comment_4: 0.5-LOWER APERTURE, USING
comment_5: 0.05" PER STEP.
!
linenum: 39.000
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: SEQ 39-40.1 NON-INT;
req_2: RT ANALYSIS;
!
linenum: 40.000
sequence_1: DEFINE
sequence_2: BLUEA
targname: NGC-188-031
config: FOS/BL
opmode: ACQ
aperture: 4.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 40S
fluxnum_1: 1
priority: 1
req_1: INT ACQ FOR 40.5-47;
!
linenum: 40.100
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: RT ANALYSIS;
!
linenum: 40.500
sequence_1: ^
targname: NGC-188-031
config: ^
opmode: ^
aperture: 4.3
sp_element: ^
num_exp: 1
time_per_exp: 50S
fluxnum_1: 1
priority: 1
comment_1: CONFIRMATION IMAGE.
!
linenum: 41.000
sequence_1: ^
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
!
linenum: 43.000
sequence_1: ^
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 45.000
sequence_1: DEFINE
sequence_2: BLUEA
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 47.000
sequence_1: ^
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN. THE PRECEDING IS A
comment_3: S&D SEQUENCE TO LOCATE THE
comment_4: 0.5 APERTURE, USING
comment_5: 0.05" PER STEP.
!
linenum: 55.000
sequence_1: ^
targname: TALED
config: FOS/BL
opmode: IMAGE
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: COMB=YES,
!
linenum: 56.000
sequence_1: ^
targname: ^
config: ^
opmode: ^
aperture: 0.5-PAIR-B
sp_element: ^
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: Y-OFFSET=253,
param_5: COMB=YES,
comment_1: TALED SHOULD BE OBSERVED WHEN LEAVING
comment_2: THE NGC 188 FIELD.
!
linenum: 58.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 11;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 11.
!
linenum: 59.000
sequence_1: DEFINE
sequence_2: BLUEA
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 13;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 13.
!
linenum: 60.000
sequence_1: DEFINE
sequence_2: BLUEA
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 15;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS
comment_3: DURING SCAN IN LINE 15.
!
linenum: 61.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 17;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 17.
!
linenum: 62.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 26;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 26.
!
linenum: 63.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 28;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 28.
!
linenum: 64.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 30;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 30.
!
linenum: 65.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 32;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 32.
!
linenum: 67.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 525S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 41;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 41.
!
linenum: 68.000
sequence_1: DEFINE
sequence_2: BLUEA
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 525S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 43;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 43.
!
linenum: 69.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 525S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 45;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 45.
!
linenum: 70.000
sequence_1: DEFINE
sequence_2: BLUEA
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 525S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 47;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 47.
!
linenum: 101.000
sequence_1: DEFINE
sequence_2: REDA
targname: TALED
config: FOS/RD
opmode: IMAGE
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: COMB=YES,
req_1: SEQ 101-156 NO GAP;
!
linenum: 102.000
sequence_1: ^
targname: ^
config: ^
opmode: ^
aperture: 0.5-PAIR-B
sp_element: ^
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: Y-OFFSET=253,
param_5: COMB=YES,
!
linenum: 109.000
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: SEQ 109-110.1 NON-INT;
req_2: RT ANALYSIS;
!
linenum: 110.000
sequence_1: ^
targname: NGC-188-031
config: FOS/RD
opmode: ACQ
aperture: 4.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 40S
fluxnum_1: 1
priority: 1
req_1: INT ACQ FOR 110.5-117;
!
linenum: 110.100
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: RT ANALYSIS;
!
linenum: 110.500
sequence_1: ^
targname: NGC-188-031
config: ^
opmode: ^
aperture: 4.3
sp_element: ^
num_exp: 1
time_per_exp: 40S
fluxnum_1: 1
priority: 1
comment_1: CONFIRMATION IMAGE.
!
linenum: 111.000
sequence_1: DEFINE
sequence_2: REDA
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5-PAIR-A
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
!
linenum: 113.000
sequence_1: ^
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5-PAIR-A
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 115.000
sequence_1: ^
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5-PAIR-A
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 117.000
sequence_1: DEFINE
sequence_2: REDA
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5-PAIR-A
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN. THE PRECEDING IS A
comment_3: S&D SEQUENCE TO LOCATE THE
comment_4: 0.5-UPPER APERTURE, USING
comment_5: 0.04" PER STEP.
!
linenum: 124.000
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: SEQ 124-125.1 NON-INT;
req_2: RT ANALYSIS;
!
linenum: 125.000
sequence_1: DEFINE
sequence_2: REDA
targname: NGC-188-031
config: FOS/RD
opmode: ACQ
aperture: 4.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 40S
fluxnum_1: 1
priority: 1
req_1: INT ACQ FOR 125.5-132;
!
linenum: 125.100
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: RT ANALYSIS;
!
linenum: 125.500
sequence_1: ^
targname: NGC-188-031
config: ^
opmode: ^
aperture: 4.3
sp_element: ^
num_exp: 1
time_per_exp: 40S
fluxnum_1: 1
priority: 1
comment_1: CONFIRMATION IMAGE.
!
linenum: 126.000
sequence_1: ^
targname: NGC-188-031
config: ^
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: ^
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
!
linenum: 128.000
sequence_1: ^
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 130.000
sequence_1: ^
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 132.000
sequence_1: ^
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN. THE PRECEDING IS A
comment_3: S&D SEQUENCE TO LOCATE THE
comment_4: 0.5-LOWER APERTURE, USING
comment_5: 0.05" PER STEP.
!
linenum: 139.000
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: SEQ 139-140.1 NON-INT;
req_2: RT ANALYSIS;
!
linenum: 140.000
sequence_1: DEFINE
sequence_2: REDA
targname: NGC-188-031
config: FOS/RD
opmode: ACQ
aperture: 4.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 40S
fluxnum_1: 1
priority: 1
req_1: INT ACQ FOR 140.5-147;
!
linenum: 140.100
sequence_1: ^
targname: TALED
config: ^
opmode: ACQ
aperture: 0.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 64S
priority: 1
req_1: RT ANALYSIS;
!
linenum: 140.500
sequence_1: ^
targname: NGC-188-031
config: ^
opmode: ^
aperture: 4.3
sp_element: ^
num_exp: 1
time_per_exp: 50S
fluxnum_1: 1
priority: 1
comment_1: CONFIRMATION IMAGE.
!
linenum: 141.000
sequence_1: ^
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN
!
linenum: 143.000
sequence_1: DEFINE
sequence_2: REDA
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 145.000
sequence_1: ^
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 147.000
sequence_1: DEFINE
sequence_2: REDA
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN. THE PRECEDING IS A
comment_3: S&D SEQUENCE TO LOCATE THE
comment_4: 0.5 APERTURE, USING
comment_5: 0.05" PER STEP.
!
linenum: 155.000
sequence_1: ^
targname: TALED
config: FOS/RD
opmode: IMAGE
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: COMB=YES,
!
linenum: 156.000
sequence_1: ^
targname: ^
config: ^
opmode: ^
aperture: 0.5-PAIR-B
sp_element: ^
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: Y-OFFSET=253,
param_5: COMB=YES,
comment_1: TALED SHOULD BE OBSERVED WHEN LEAVING
comment_2: THE NGC 188 FIELD.
!
linenum: 158.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 111;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 111.
!
linenum: 159.000
sequence_1: DEFINE
sequence_2: REDA
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 113;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 113;
!
linenum: 160.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 115;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 115.
!
linenum: 161.000
sequence_1: DEFINE
sequence_2: REDA
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 117;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 117.
!
linenum: 162.000
sequence_1: DEFINE
sequence_2: REDA
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 126;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 126.
!
linenum: 163.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 128;
comment_1: THIS LINE PROVIDES 323K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 128.
!
linenum: 164.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 130;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 130.
!
linenum: 165.000
sequence_1: DEFINE
sequence_2: REDA
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 132;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 132.
!
linenum: 167.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 413S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 141;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 141.
!
linenum: 168.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 413S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 143;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 143.
!
linenum: 169.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 413S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 145;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 145.
!
linenum: 170.000
sequence_1: DEFINE
sequence_2: REDA
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 413S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 147;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 147.
!
linenum: 201.000
sequence_1: DEFINE
sequence_2: BLUEB
targname: TALED
config: FOS/BL
opmode: IMAGE
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: COMB=YES,
req_1: SEQ 201-257 NO GAP;
!
linenum: 203.000
sequence_1: ^
targname: ^
config: ^
opmode: ^
aperture: 0.5-PAIR-B
sp_element: ^
num_exp: 1
time_per_exp: 340S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: Y-OFFSET=253,
param_5: COMB=YES,
!
linenum: 225.000
sequence_1: ^
targname: NGC-188-031
config: FOS/BL
opmode: ACQ/BINARY
aperture: 4.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 5S
fluxnum_1: 1
priority: 1
req_1: ONBOARD ACQ FOR 225.5-232;
!
linenum: 225.500
sequence_1: ^
targname: ^
config: ^
opmode: ACQ
aperture: ^
sp_element: ^
num_exp: 1
time_per_exp: 69S
fluxnum_1: 1
priority: 1
comment_1: CONFIRMATION IMAGE.
!
linenum: 226.000
sequence_1: DEFINE
sequence_2: BLUEB
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
!
linenum: 228.000
sequence_1: ^
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 230.000
sequence_1: ^
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 232.000
sequence_1: DEFINE
sequence_2: BLUEB
targname: NGC-188-031
config: FOS/BL
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 20S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN. THE PRECEDING IS A
comment_3: S&D SEQUENCE TO LOCATE THE
comment_4: 0.5-LOWER APERTURE, USING
comment_5: 0.05" PER STEP.
!
linenum: 255.000
sequence_1: ^
targname: TALED
config: FOS/BL
opmode: IMAGE
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: COMB=YES,
!
linenum: 257.000
sequence_1: DEFINE
sequence_2: BLUEB
targname: TALED
config: FOS/BL
opmode: IMAGE
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 340S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: Y-OFFSET=253,
param_5: COMB=YES,
comment_1: TALED SHOULD BE OBSERVED WHEN LEAVING
comment_2: THE NGC 188 FIELD.
!
linenum: 259.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 226;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 226.
!
linenum: 260.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 228;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 228
!
linenum: 261.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 230;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 230.
!
linenum: 262.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 450S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 232;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 232.
!
linenum: 301.000
sequence_1: DEFINE
sequence_2: REDB
targname: TALED
config: FOS/RD
opmode: IMAGE
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: COMB=YES,
req_1: SEQ 301-357 NO GAP;
!
linenum: 303.000
sequence_1: ^
targname: ^
config: ^
opmode: ^
aperture: 0.5-PAIR-B
sp_element: ^
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: Y-OFFSET=253,
param_5: COMB=YES,
!
linenum: 325.000
sequence_1: ^
targname: NGC-188-031
config: FOS/RD
opmode: ACQ/BINARY
aperture: 4.3
sp_element: MIRROR
num_exp: 1
time_per_exp: 1.7S
fluxnum_1: 1
priority: 1
req_1: ONBOARD ACQ FOR 325.5-332;
!
linenum: 325.500
sequence_1: ^
targname: ^
config: ^
opmode: ACQ
aperture: ^
sp_element: ^
num_exp: 1
time_per_exp: 69S
fluxnum_1: 1
priority: 1
comment_1: CONFIRMATION IMAGE.
!
linenum: 326.000
sequence_1: ^
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
!
linenum: 328.000
sequence_1: DEFINE
sequence_2: REDB
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 330.000
sequence_1: ^
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN.
!
linenum: 332.000
sequence_1: DEFINE
sequence_2: REDB
targname: NGC-188-031
config: FOS/RD
opmode: ACCUM
aperture: 0.5-PAIR-B
sp_element: MIRROR
num_exp: 1
time_per_exp: 4S
priority: 1
param_1: STEP-PATT=SINGLE,
req_1: SPATIAL SCAN;
comment_1: RECENTER OBJECT BEFORE BEGINNING
comment_2: SPATIAL SCAN. THE PRECEDING IS A
comment_3: S&D SEQUENCE TO LOCATE THE
comment_4: 0.5-LOWER APERTURE, USING
comment_5: 0.05" PER STEP.
!
linenum: 355.000
sequence_1: ^
targname: TALED
config: FOS/RD
opmode: IMAGE
aperture: 0.5
sp_element: MIRROR
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: COMB=YES,
!
linenum: 357.000
sequence_1: ^
targname: ^
config: ^
opmode: ^
aperture: 0.5-PAIR-B
sp_element: ^
num_exp: 1
time_per_exp: 85S
priority: 1
param_1: Y-SIZE=85,
param_2: SUB-STEP=4,
param_3: Y-SPACE=14.3,
param_4: Y-OFFSET=253,
param_5: COMB=YES,
comment_1: TALED SHOULD BE OBSERVED WHEN LEAVING
comment_2: THE NGC 188 FIELD.
!
linenum: 358.000
sequence_1: ^
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN,
req_1: PAR WITH 328;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 328.
!
linenum: 359.000
sequence_1: DEFINE
sequence_2: REDB
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 326;
comment_1: THIS LINE PROVIDES 32K ENGINEERING
comment_2: DATA FOR FGS ENCODER READINGS DURING
comment_3: SCAN IN LINE 326.
!
linenum: 360.000
sequence_1: DEFINE
sequence_2: REDB
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 330;
comment_1: THIS LINE PROVIDES 32K
comment_2: ENGINEERING DATA FOR FGS
comment_3: ENCODER READINGS DURING
comment_4: SCAN IN LINE 330.
!
linenum: 362.000
sequence_1: DEFINE
sequence_2: REDB
targname: DARK
config: S/C
opmode: DATA
aperture: NONE
num_exp: 1
time_per_exp: 354S
priority: 1
param_1: FORMAT=FN
req_1: PAR WITH 332;
comment_1: THIS LINE PROVIDES 32K
comment_2: ENGINEERING DATA FOR FGS
comment_3: ENCODER READINGS DURING
comment_4: SCAN IN LINE 332.
!
linenum: 400.000
sequence_1: USE
sequence_2: BLUEA
req_1: CYCLE 0/400-409;
comment_1: INITIAL BLUE PHASE IVA.
!
linenum: 401.000
sequence_1: USE
sequence_2: REDA
comment_1: INITIAL RED PHASE IVA.
!
linenum: 402.000
sequence_1: USE
sequence_2: BLUEB
req_1: AFTER 400 BY 30D+/-10D;
req_2: GROUP 402,406 WITHIN 48H;
comment_1: SECOND BLUE PHASE IVA.
!
linenum: 403.000
sequence_1: ^
sequence_2: ^
req_1: AFTER 402 BY 30D+/-10D;
req_2: GROUP 403,407 WITHIN 48H;
comment_1: THIRD BLUE PHASE IVA.
!
linenum: 404.000
sequence_1: ^
sequence_2: ^
req_1: AFTER 403 BY 30D+/-10D;
req_2: GROUP 404,408 WITHIN 48H;
comment_1: FOURTH BLUE PHASE IVA.
!
linenum: 405.000
sequence_1: USE
sequence_2: BLUEB
req_1: AFTER 404 BY 30D+/-10D;
req_2: GROUP 405,409 WITHN 48H;
comment_1: FIFTH BLUE PHASE IVA.
!
linenum: 406.000
sequence_1: USE
sequence_2: REDB
comment_1: SECOND RED PHASE IVA.
!
linenum: 407.000
sequence_1: ^
sequence_2: ^
comment_1: THIRD RED PHASE IVA.
!
linenum: 408.000
sequence_1: ^
sequence_2: ^
comment_1: FOURTH RED PHASE IVA.
!
linenum: 409.000
sequence_1: USE
sequence_2: REDB
comment_1: FIFTH RED PHASE IVA.
!
! end of exposure logsheet
scan_data:
line_list: 11,26,41,111,126,141,226,326
fgs_scan:
cont_dwell: D
dwell_pnts: 11
dwell_secs: 59.00
scan_width: 0.0000
scan_length: 0.5000
sides_angle: 0.0000
number_lines: 1
scan_rate: 0.0000
first_line_pa: 0.0000
scan_frame: S/C
len_offset: 0.0000
wid_offset: 0.0000
!
line_list: 13,28,43,113,128,143,228,328
fgs_scan:
cont_dwell: D
dwell_pnts: 11
dwell_secs: 59.00
scan_width: 0.0000
scan_length: 0.5000
sides_angle: 0.0000
number_lines: 1
scan_rate: 0.0000
first_line_pa: 90.0000
scan_frame: S/C
len_offset: 0.0000
wid_offset: 0.0000
!
line_list: 15,30,45,115,130,145,230,330
fgs_scan:
cont_dwell: D
dwell_pnts: 11
dwell_secs: 59.00
scan_width: 0.0000
scan_length: 0.5000
sides_angle: 0.0000
number_lines: 1
scan_rate: 0.0000
first_line_pa: 180.0000
scan_frame: S/C
len_offset: 0.0000
wid_offset: 0.0000
!
line_list: 17,32,47,117,132,147,232,332
fgs_scan:
cont_dwell: D
dwell_pnts: 11
dwell_secs: 59.00
scan_width: 0.0000
scan_length: 0.5000
sides_angle: 0.0000
number_lines: 1
scan_rate: 0.0000
first_line_pa: 270.0000
scan_frame: S/C
len_offset: 0.0000
wid_offset: 0.0000
!
! end of scan data