!  File:  3072C.PROP
!  Database:  PEPDB
!  Date:  18-FEB-1994:14:39:23

coverpage:

  title_1:         HSP TARGET ACQUISITION TEST HSP-02 (TUBE UV1)
    proposal_for:  SV/HSP
    pi_fname:      ROBERT
    pi_mi:         C.
    pi_lname:      BLESS
    pi_inst:       UNIVERSITY OF WISCONSIN
    pi_country:    USA
    pi_phone:      (608)262-1715
    hours_pri:     1.63
    num_pri:       1
! end of coverpage

abstract:

    line_1:        Alignment test: @(#)1381.sh     1.15 (9/20/90).
    line_2:        Batch edit: @(#)1381.fix 1.3 (9/11/90).
    line_3:        This proposal outlines the test procedure for verifying
    line_4:        HSP Mode II target acquisition (on-board) capability
    line_5:        for each of the four IDTs on the HSP.  Using a stellar
    line_6:        source in the CVZ, each IDT will have the target placed
    line_7:        in its finding aperture where a small area scan is
    line_8:        taken to confirm the location of the star; additional
    line_9:        pointing commands will then position the source in a
    line_10:       selected aperture.  This test verifies the interaction
    line_11:       of HSP with the HST Pointing Control System (PCS) and
    line_12:       serves to check the HST-HSP mechanical alignment.

!
! end of abstract

general_form_proposers:

  lname:           BLESS
    fname:         R.
    mi:            C.
    inst:          UNIVERSITY OF WISCONSIN
    country:       USA

!

  lname:           RICHARDS
    fname:         E.
    mi:            E.
    inst:          UNIVERSITY OF WISCONSIN
    country:       USA

!

  lname:           PERCIVAL
    fname:         J.
    mi:            W.
    inst:          UNIVERSITY OF WISCONSIN
    country:       USA

!
! end of general_form_proposers block

general_form_text:

  question:        3
    section:       1
    line_1:        This test checks Mode II target acquisition for tube
    line_2:        UV1.  After HST is commanded to place the target in the
    line_3:        finding aperture, a 20 x 20 acquisition area scan is
    line_4:        performed.  The HSP flight software will determine the
    line_5:        target centroid, and center the target in the finding
    line_6:        aperture.  Repeated acquisitions will test the
    line_7:        centering accuracy of the algorithm.  After the
    line_8:        iteration test, the acquisition program will command a
    line_9:        small angle maneuver to place the target in one of five
    line_10:       small photometry apertures.  A high-resolution image is
    line_11:       then performed to check the placement of the target.

!

  question:        3
    section:       2
    line_1:        The apertures to be tested for the UV1 tube are:
    line_2:        1. 1.0-B-F248M
    line_3:        2. 1.0-A-F184W
    line_4:        3. 1.0-B-F135W
    line_5:        4. 1.0-A-F152M
    line_6:        5. 0.4-B-F278N

!

  question:        3
    section:       3
    line_1:        Revision History:
    line_2:        15 Mar 1989, salm: Updated.
    line_3:        09 Aug 1989, salm: Reppert comments of 06 Jun 1989.
    line_4:        24 May 1990, salm: Updated text.
    line_5:        05 Sep 1990, jwp: Major rev, updated for PSF study.
    line_6:        18 Sep 1990, jwp: stanley input of 14 Sep 1990
    line_7:        19 Sep 1990, jwp: scrub to use less time

!

  question:        5
    section:       1
    line_1:        The proposed test will require approximately TBD
    line_2:        minutes to complete per IDT.  For each new offset in
    line_3:        the UV1 finding aperture, all the iterated acquisitions
    line_4:        or images should be performed without interruption.
    line_5:        Breaks can occur between sets of iterations, or after
    line_6:        images, whenever a new offset is requested.
    line_7:        The OV HSP MSC tests Phases I - III are prerequisites
    line_8:        for this test.
    line_9:        Pointing Stability:  Coarse track is understood to have
    line_10:       less than 19 milliarcsec stability.  That is
    line_11:       satisfactory for all observations in the 10" and 1.0"
    line_12:       IDT apertures.  HSP requires fine lock for all
    line_13:       observations in the 0.4" apertures.

!

  question:        7
    section:       1
    line_1:        The data reduction and analysis consist of examining
    line_2:        the UV1 images of each aperture position to check the
    line_3:        accuracy of the VFTAV centering algorithm.

!

  question:        8
    section:       1
    line_1:        We anticipate no need for supporting or coordinate
    line_2:        observations with other facilities or additional
    line_3:        special requirements.

!

  question:        10
    section:       1
    line_1:        Data reduction and analysis will be supported on these
    line_2:        computer facilities:
    line_3:        1. MADRAF (UW), VAX 11/780 (VMS), IRAF/STSDAS
    line_4:        2. UWSAL (UW), MicroVAX II (Ultrix), IRAF/STSDAS
    line_5:        3. IDTVAX (STScI), VAX (VMS), IRAF/STSDAS
    line_6:        4. idtsun.stsci.edu (STScI), Sun (Unix), IRAF/STSDAS

!
!end of general form text

general_form_address:

  lname:           BLESS
    fname:         ROBERT
    mi:            C.
    category:      PI
    inst:          UNIVERSITY OF WISCONSIN

!

  lname:           RICHARDS
    fname:         EVAN
    mi:            E.
    category:      CON
    inst:          UNIVERSITY OF WISCONSIN
    addr_1:        SPACE SCIENCE AND ENGINEERING CENTER
    addr_2:        1225 WEST DAYTON STREET
    city:          MADISON
    state:         WI
    zip:           53706
    country:       USA
    phone:         (608)263-6775

!

  lname:           PERCIVAL
    fname:         JEFFREY
    mi:            W.
    category:      CON
    inst:          UNIVERSITY OF WISCONSIN
    addr_1:        SPACE ASTRONOMY LABORATORY
    addr_2:        1150 UNIVERSITY AVE.
    city:          MADISON
    state:         WI
    zip:           53706
    country:       USA
    phone:         (608)262-8686

!
! end of general_form_address records

fixed_targets:

    targnum:       1
    name_1:        SAO4165
    descr_1:       B3 STAR IN CVZ
    pos_1:         RA=00H 34M 38.135S +/- 0.01S,
    pos_2:         DEC=+72D 37' 12.66" +/- 0.1"
    equinox:       1950
    plate_req:     NO
    fluxnum_1:     1
    fluxval_1:     V=7.1, TYPE=B3

!

    targnum:       2
    name_1:        SAO13012
    descr_1:       B2 STAR IN CVZ
    pos_1:         RA=04H 01M 44.278S +/- 0.01S,
    pos_2:         DEC=61D 58' 0.83" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=6.7,TYPE=B2

!

    targnum:       3
    name_1:        SAO6790
    descr_1:       B3 STAR IN CVZ
    pos_1:         RA=09H 10M 41.849S +/- 0.01S,
    pos_2:         DEC=79D 29' 21.79" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=8.5,TYPE=B3

!

    targnum:       4
    name_1:        SAO16291
    descr_1:       B9 STAR IN CVZ
    pos_1:         RA=13H 08M 29.367S +/- 0.01S,
    pos_2:         DEC=69D 49' 32.25" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=7.4,TYPE=B9

!

    targnum:       5
    name_1:        SAO16956
    descr_1:       ^
    pos_1:         RA=16H 05M 24.973S +/- 0.01S,
    pos_2:         DEC=61D 45' 29.99" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=8.0,TYPE=B9

!

    targnum:       6
    name_1:        SAO9827
    descr_1:       B3 STAR IN CVZ
    pos_1:         RA=20H 38M 01.723S +/- 0.01S,
    pos_2:         DEC=79D 15' 15.00" +/- 0.1"
    equinox:       ^
    plate_req:     ^
    fluxnum_1:     1
    fluxval_1:     V=6.8,TYPE=B3

!
! end of fixed targets

! No solar system records found

! No generic target records found

exposure_logsheet:

    linenum:       200.000
    sequence_1:    DEFINE
    sequence_2:    ACQUIRE
    targname:      SAO4165
    config:        HSP/UV1
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       DATA-FORMAT=WORD,
    comment_1:     DUMP LOGS AND SCRATCH PAD AFTER ACQ.
    comment_2:     CHOOSE A TARGET IN CVZ.

!

    linenum:       201.000
    sequence_1:    DEFINE
    sequence_2:    ITERATE
    targname:      ^
    config:        HSP/UV1
    opmode:        ACQ
    num_exp:       1
    time_per_exp:  0.4S
    fluxnum_1:     1
    priority:      1
    param_1:       #
    comment_1:     DUMP LOGS AND SCRATCH PAD AFTER ACQ.

!

    linenum:       202.000
    sequence_1:    DEFINE
    sequence_2:    BIG-IMAGE
    targname:      ^
    config:        HSP/UV1
    opmode:        IMAGE
    aperture:      10.0
    sp_element:    F140LP
    num_exp:       1
    time_per_exp:  0.96S
    priority:      1
    param_1:       X-SIZE=30,
    param_2:       Y-SIZE=32,
    param_3:       SPACING=0.3,
    param_4:       DATA-FORMAT=WORD,

!

    linenum:       203.000
    sequence_1:    DEFINE
    sequence_2:    SMA-IMAGE
    targname:      ^
    config:        HSP/UV1
    opmode:        IMAGE
    aperture:      #
    sp_element:    #
    num_exp:       1
    time_per_exp:  9.6S
    priority:      1
    param_1:       X-SIZE=30,
    param_2:       Y-SIZE=32,
    param_3:       SPACING=0.1,
    param_4:       DATA-FORMAT=WORD,

!

    linenum:       204.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 205.000;
    req_2:         POS TARG 0,0;
    req_3:         GROUP 204-209 NON-INT;
    req_4:         CYCLE 0 / 204-263;
    comment_1:     TUBE UV1 OFFSET 1 ACQ.

!

    linenum:       205.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 206.000;
    comment_1:     TUBE UV1 OFFSET 1 ITERATION 1.

!

    linenum:       206.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 207.000;
    comment_1:     TUBE UV1 OFFSET 1 ITERATION 2.

!

    linenum:       207.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 208.000;
    comment_1:     TUBE UV1 OFFSET 1 ITERATION 3.

!

    linenum:       208.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.3,
    req_1:         ONBOARD ACQ FOR 209.000;
    comment_1:     TUBE UV1 OFFSET 1 ITERATION 4.

!

    linenum:       209.000
    sequence_1:    USE
    sequence_2:    BIG-IMAGE
    comment_1:     TUBE UV1 OFFSET 1 BIG IMAGE.

!

    linenum:       210.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 211.000;
    req_2:         POS TARG 0.1,0.2;
    req_3:         GROUP 210-215 NON-INT;
    comment_1:     TUBE UV1 OFFSET 2 ACQ.

!

    linenum:       211.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 212.000;
    comment_1:     TUBE UV1 OFFSET 2 ITERATION 1.

!

    linenum:       212.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 213.000;
    comment_1:     TUBE UV1 OFFSET 2 ITERATION 2.

!

    linenum:       213.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 214.000;
    comment_1:     TUBE UV1 OFFSET 2 ITERATION 3.

!

    linenum:       214.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.3,
    req_1:         ONBOARD ACQ FOR 215.000;
    comment_1:     TUBE UV1 OFFSET 2 ITERATION 4.

!

    linenum:       215.000
    sequence_1:    USE
    sequence_2:    BIG-IMAGE
    comment_1:     TUBE UV1 OFFSET 2 BIG IMAGE.

!

    linenum:       216.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 217.000;
    req_2:         POS TARG -0.3,0.2;
    req_3:         GROUP 216-221 NON-INT;
    comment_1:     TUBE UV1 OFFSET 3 ACQ.

!

    linenum:       217.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 218.000;
    comment_1:     TUBE UV1 OFFSET 3 ITERATION 1.

!

    linenum:       218.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 219.000;
    comment_1:     TUBE UV1 OFFSET 3 ITERATION 2.

!

    linenum:       219.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 220.000;
    comment_1:     TUBE UV1 OFFSET 3 ITERATION 3.

!

    linenum:       220.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.3,
    req_1:         ONBOARD ACQ FOR 221.000;
    comment_1:     TUBE UV1 OFFSET 3 ITERATION 4.

!

    linenum:       221.000
    sequence_1:    USE
    sequence_2:    BIG-IMAGE
    comment_1:     TUBE UV1 OFFSET 3 BIG IMAGE.

!

    linenum:       222.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 223.000;
    req_2:         POS TARG -0.3,-0.4;
    req_3:         GROUP 222-227 NON-INT;
    comment_1:     TUBE UV1 OFFSET 4 ACQ.

!

    linenum:       223.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 224.000;
    comment_1:     TUBE UV1 OFFSET 4 ITERATION 1.

!

    linenum:       224.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 225.000;
    comment_1:     TUBE UV1 OFFSET 4 ITERATION 2.

!

    linenum:       225.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 226.000;
    comment_1:     TUBE UV1 OFFSET 4 ITERATION 3.

!

    linenum:       226.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.3,
    req_1:         ONBOARD ACQ FOR 227.000;
    comment_1:     TUBE UV1 OFFSET 4 ITERATION 4.

!

    linenum:       227.000
    sequence_1:    USE
    sequence_2:    BIG-IMAGE
    comment_1:     TUBE UV1 OFFSET 4 BIG IMAGE.

!

    linenum:       228.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 229.000;
    req_2:         POS TARG 0.5,-0.4;
    req_3:         GROUP 228-233 NON-INT;
    comment_1:     TUBE UV1 OFFSET 5 ACQ.

!

    linenum:       229.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 230.000;
    comment_1:     TUBE UV1 OFFSET 5 ITERATION 1.

!

    linenum:       230.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 231.000;
    comment_1:     TUBE UV1 OFFSET 5 ITERATION 2.

!

    linenum:       231.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 232.000;
    comment_1:     TUBE UV1 OFFSET 5 ITERATION 3.

!

    linenum:       232.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.3,
    req_1:         ONBOARD ACQ FOR 233.000;
    comment_1:     TUBE UV1 OFFSET 5 ITERATION 4.

!

    linenum:       233.000
    sequence_1:    USE
    sequence_2:    BIG-IMAGE
    comment_1:     TUBE UV1 OFFSET 5 BIG IMAGE.

!

    linenum:       234.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 235;
    req_2:         GROUP 234-235 NON-INT;
    comment_1:     TUBE UV1 APER 1 ACQ.

!

    linenum:       235.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      1.0-B
    sp_element:    F248M
    comment_1:     TUBE UV1 APER 1 IMAGE.

!

    linenum:       236.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 237;
    req_2:         GROUP 236-239 NON-INT;
    comment_1:     TUBE UV1 APER 1 ACQ.

!

    linenum:       237.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 238.000;
    comment_1:     TUBE UV1 APER 1 ITER 1.

!

    linenum:       238.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 239.000;
    comment_1:     TUBE UV1 APER 1 ITER 2.

!

    linenum:       239.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      1.0-B
    sp_element:    F248M
    comment_1:     TUBE UV1 APER 1 IMAGE.

!

    linenum:       240.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 241;
    req_2:         GROUP 240-241 NON-INT;
    comment_1:     TUBE UV1 APER 2 ACQ.

!

    linenum:       241.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      1.0-A
    sp_element:    F184W
    comment_1:     TUBE UV1 APER 2 IMAGE.

!

    linenum:       242.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 243;
    req_2:         GROUP 242-245 NON-INT;
    comment_1:     TUBE UV1 APER 2 ACQ.

!

    linenum:       243.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 244.000;
    comment_1:     TUBE UV1 APER 2 ITER 1.

!

    linenum:       244.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 245.000;
    comment_1:     TUBE UV1 APER 2 ITER 2.

!

    linenum:       245.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      1.0-A
    sp_element:    F184W
    comment_1:     TUBE UV1 APER 2 IMAGE.

!

    linenum:       246.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 247;
    req_2:         GROUP 246-247 NON-INT;
    comment_1:     TUBE UV1 APER 3 ACQ.

!

    linenum:       247.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      1.0-B
    sp_element:    F135W
    comment_1:     TUBE UV1 APER 3 IMAGE.

!

    linenum:       248.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 249;
    req_2:         GROUP 248-251 NON-INT;
    comment_1:     TUBE UV1 APER 3 ACQ.

!

    linenum:       249.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 250.000;
    comment_1:     TUBE UV1 APER 3 ITER 1.

!

    linenum:       250.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 251.000;
    comment_1:     TUBE UV1 APER 3 ITER 2.

!

    linenum:       251.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      1.0-B
    sp_element:    F135W
    comment_1:     TUBE UV1 APER 3 IMAGE.

!

    linenum:       252.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 253;
    req_2:         GROUP 252-253 NON-INT;
    comment_1:     TUBE UV1 APER 4 ACQ.

!

    linenum:       253.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      1.0-A
    sp_element:    F152M
    comment_1:     TUBE UV1 APER 4 IMAGE.

!

    linenum:       254.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 255;
    req_2:         GROUP 254-257 NON-INT;
    comment_1:     TUBE UV1 APER 4 ACQ.

!

    linenum:       255.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 256.000;
    comment_1:     TUBE UV1 APER 4 ITER 1.

!

    linenum:       256.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 257.000;
    comment_1:     TUBE UV1 APER 4 ITER 2.

!

    linenum:       257.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      1.0-A
    sp_element:    F152M
    comment_1:     TUBE UV1 APER 4 IMAGE.

!

    linenum:       258.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 259;
    req_2:         GROUP 258-259 NON-INT;
    comment_1:     TUBE UV1 APER 5 ACQ.

!

    linenum:       259.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      0.4-B
    sp_element:    F278N
    comment_1:     TUBE UV1 APER 5 IMAGE.

!

    linenum:       260.000
    sequence_1:    USE
    sequence_2:    ACQUIRE
    req_1:         ONBOARD ACQ FOR 261;
    req_2:         GROUP 260-263 NON-INT;
    comment_1:     TUBE UV1 APER 5 ACQ.

!

    linenum:       261.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 262.000;
    comment_1:     TUBE UV1 APER 5 ITER 1.

!

    linenum:       262.000
    sequence_1:    USE
    sequence_2:    ITERATE
    param_1:       DATA-FORMAT=WORD,
    param_2:       SPACING=0.5,
    req_1:         ONBOARD ACQ FOR 263.000;
    comment_1:     TUBE UV1 APER 5 ITER 2.

!

    linenum:       263.000
    sequence_1:    USE
    sequence_2:    SMA-IMAGE
    aperture:      0.4-B
    sp_element:    F278N
    comment_1:     TUBE UV1 APER 5 IMAGE.

!
! end of exposure logsheet

! No scan data records found